Ortomat-MT universal - Detection Solutions

T E C H N O L O G Y W I T H
A
F U T U R E
Ortomat-MT universal
• 3-channel data logger
• Autonomous operation
• 24h-monitoring
• Data communication via GSM network
• System compatibility to Ortomat-MT
noise logger
• Robust and waterproof IP68
Ortomat-MT universal – permanent process-surveillance
with autonomous data-transfer
The Ortomat-MT universal complements the Ortomat-MT noise logger
and enables autonomous measurements with unlimited applications.
Most of the commercially available
sensors can be attached. It uniquely
requires an output-signal of 4-20mA or
0-2V.
Depending on the situation/application
are either periodical single-values (free
defined measurement intervals) or
mean-value measurements possible.
(sampling time approx. 100ms)
The measured data are saved, monitored and via GPRS to a FTP-server
periodically transferred.
The basic version is equipped with
a 3-channel measure module which
consist of two analog inputs (4-20mA
or 0-2V) and an impulse input (reed,
optical).
On-line radio connection
Data via FTP
PC measurement center
Alarms
via SMS
Internet
GSM modem
Bluetooth
GSM
GPRS
FTP server
PC measurement center
Data transfer
Mobile phone
Applications
Level
sensor
• Temperature monitoring
• Pressure monitoring
• Flow monitoring for DMA management
• Level monitoring (reservoir, tank etc.)
• Etc.
Temperatur
sensor
Pressure
sensor
MID-flowmeter
The third channel records impulsesignals from various flowmeter sensors
which enable following applications:
• Flowmeter with REED output signal
• Flowmeter with optical impulse output
• Flowmeter with open-collector
impulse output
A signal splitter box with a DIN assembly rail and adaptor and an additional
lithium-battery package assures an
easy installation of the sensors on-site.
It enables an autonomous operation
from up to 2 years.
Signal splitter box with
lithium-battery package
In addition are following applications
possible:
• Meteo monitoring (temperature,
humidity, air pressure, wind speed
and wind direction)
• Rain
• Waterquality for turbidity,
conductivity, oxygen content
and pH-value
Meteo sensor
Universal power supply
of the sensors
The individual adaptable power supply
for the corresponding sensors is an additional asset of the software. The Ortomat-MT universal is capable to provide
the requested supply voltage with the
needed actuation time for the individual
sensors. Several sensor types are already stored in the default settings.
Online-monotoring
Channel-settings
Measuring operation
The recorded measuring values can be
online visualized via Bluetooth or GSM
connection. It is possible to program
two independent measurement intervals, which enables to monitor the data
in different time sequences. There is a
storage capacity of 70’000 measurement values.
Threshold monitoring
Software
The threshold-values (upper- and lower
limits) of all three channels can be programmed and monitored. There are up
to four recipients who can receive a text
message in case one of the thresholds
is out of the accepted limits.
The software is very user friendly and all
measurement points (data loggers) are
clearly arranged.
Both, the Ortomat-MT universal and
the Ortomat-MT noise logger can be
embedded in the same project which
shows the compatibility of the software.
Ortomat-MT software
Feel free to call us and reserve a demonstration date or
ask us for our comprehensive product documentation.
The Ortomat-GIS is optionally available
for the visualisation of the location of
the measurement points. Alternatively,
we provide Ortomat easy-map, which is
based on Google-maps.
The measured values can be exported
into an Excel-file for further processing.
easy-map Mapping tool
Download PDF
Similar pages