Cisco 880 Series Integrated Services Routers - MA

Data Sheet
Cisco 880 Series Integrated Services Routers
®
The Cisco 880 Series Integrated Services Routers combine Internet access, security
and wireless services onto a single, secure device that is simple to use and manage for
small businesses and enterprise small branch and teleworkers. The Cisco 880 Series
delivers features, including firewall, content filtering, VPNs, and WLANs, at broadband
speeds to small offices. Easy deployment and centralized management features enable
the Cisco 880 Series to be deployed by enterprises or service providers in small branch
offices or small businesses.
Product Overview
Cisco 880 Series Integrated Services Routers are fixed-configuration routers that provide
collaborative business solutions for secure data communication to small businesses and
1
enterprise teleworkers. The Cisco 880 Series offers concurrent broadband services over 3G ,
Metro Ethernet, and multiple types of DSL and provides business continuity. Wireless 802.11n and
3G offer LAN and WAN mobility. The Cisco 880 Series provides the performance required for
concurrent services, including firewall, intrusion prevention, content filtering, and encryption for
VPNs; optional 802.11g/n for mobility; and quality of service (QoS) features for optimizing voice
and video applications. In addition, Cisco Configuration Professional is a Web-based configuration
tool that simplifies setup and deployment. Centralized management capabilities give network
managers visibility and control of the network configurations at the remote site.
Cisco 880 Series Integrated Services Routers offer:
●
High performance for broadband access in small offices and small branch and teleworker
sites
●
Collaborative services and data communication
●
Business continuity and WAN diversity with redundant WAN links: Fast Ethernet,
G.SHDSL, 3G, and ISDN
●
Enhanced security, including:
◦
Firewall with advance application and control for e-mail, IM instant messaging and HTTP
traffic
◦
Site-to-site remote access and dynamic VPN services: IP Security (IPSec) VPNs (Triple
Data Encryption Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic
Multipoint VPN [DMVPN], Group Encrypted Transport VPN with onboard acceleration,
and Secure Sockets Layer (SSL) VPN.
◦
Intrusion prevention system (IPS): an inline, deep-packet inspection feature that
effectively mitigates a wide range of network attacks.
◦
Content filtering: a subscription-based integrated security solution that offers categorybased reputation rating; keyword blocking; and protection against adware, malware,
spyware, and URL blocking.
1
Availability 2Half Calendar 2008
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 1
Data Sheet
●
4-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power
over Ethernet (PoE) for powering IP phones or external access points
●
Secure 802.11g/n access point option based on draft 802.11n standard with support for
Autonomous or Cisco Unified WLAN architectures
●
CON/AUX port for console or external modem
●
1 USB1.1 port for security e-token credentials, booting from USB, loading configuration
●
Easy setup, deployment, and remote management capabilities through Web-based tools
®
and Cisco IOS Software
Figure 1 shows a Cisco 881 Integrated Services Router.
Figure 1.
Cisco 881 Integrated Services Router with Integrated 802.11n Access Point
Table 1 lists the routers that currently make up the Cisco 880 Data Series.
Table 1.
Cisco 880 Series Data Models
Models
WAN Interface LAN Interfaces
802.11g/n Option
Integrated 3G*
Integrated ISDN
Dial Backup
Cisco 881
10/100-Mbps
Fast Ethernet
4-port 10/100-Mbps
managed switch
Yes (Cisco 881W)
Yes (Cisco 881G)
–
Cisco 888
G.SHDSL
4-port 10/100-Mbps
managed switch
Yes (Cisco 888W)
Yes (Cisco 888G)
Yes
* Availability 2Half Calendar 2008
The Cisco 880 Series is ideal for small branch offices and teleworkers who need to be connected
to larger enterprise networks as well as small businesses. The Cisco 880 Series helps extend
corporate networks to secure remote sites, while giving users access to the same applications
found in a corporate office. This applies to both data and voice applications, where IP phones can
be used to extend a corporate voice extension to the remote office. When users require WLAN
access, visibility and control of network security are even more critical at the remote site. The
Cisco 880 Series meets this need with a single device that combines integrated 802.11g/n
capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication
with IEEE 802.1X with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP
(PEAP) and encryption with WPA Temporal Key Integrity Protocol (TKIP). (See wireless solution
overview and security data sheet for more information.) The Cisco 880 Series models that include
the integrated Access Point can utilize both Autonomous or Cisco Unified WLAN modes. In Cisco
Unified Mode, as part of an Enterprise WLAN architecture, all WLAN functionality is centrally
managed through Cisco WLAN Controllers and the Cisco Wireless Control System.
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 13
Data Sheet
Service providers and value-added resellers can take advantage of the Cisco 880 Series to
provide a true business-class broadband service. Business customers are using broadband
access to connect to the Internet or to connect offices together and require a platform that
incorporates security without sacrificing performance. Many of these customers are connecting
computers in offices through WLANs; having a single device for both WAN and WLAN access
provides a new option for managed services. These customers also require a higher level of
support to keep their networks up and running. Services with these customers should be simple to
set up, while allowing a level of remote management and troubleshooting to quickly address
support inquiries. The Cisco 880 Series meets the requirements of small offices and managed
services providers.
Figure 2 shows deployment scenarios.
Figure 2.
Deployment Scenarios
Applications
The Cisco 880 Series is ideally suited to be deployed in a small office or in a small office that is
part of a large network, most often with a secure VPN connection. These types of offices can
include the following:
●
Small remote office: Connects users in a small remote office, such as insurance agents,
lawyer offices, or sales offices. When connecting to the main office, VPN encryption and
integrated security such as firewall and intrusion prevention protect the network at every
perimeter. IT managers can centrally manage the remote site to quickly troubleshoot any
network issues. For added reliability, customers can also use the integrated 3G or ISDN
backup or through an external modem, should the primary broadband link fail. Integrated
secure unified WLAN connectivity simplifies the deployment and management devices at
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 13
Data Sheet
the remote site. Redundant WAN links offer business continuity, enabling nondisruptive
business operation.
●
Virtual office: The Cisco 880 Series is ideal for corporate teleworkers, who might have a
mix of broadband connection types such as DSL, 3G, and Metro Ethernet. The Cisco 880
Series provides a secure virtual office with all the collaborative services such as data, voice
and video. Redundant WAN links help ensure business continuity. QoS features in the
Cisco 880 Series allow an IP phone to be connected to the router, giving voice traffic
precedence over data applications. Integrated WLAN support in the Cisco 880 Series helps
ensure that if wireless connectivity is to be used, it can be done securely. (See Cisco
Business-Ready Teleworker Solutions for more information.)
●
Remote call center agent: Similar to teleworking applications, this solution extends the
Cisco IP Contact Center solution for telephone call center agents to remote sites. With a
high-quality, secure connection through the Cisco 880 Series, the call center agent can be
dispersed away from costly call center facilities while maintaining secure and productive
voice and data access in the home. Business continuity solutions in the Cisco 880 Series
provide reliability and continuous business operation.
●
Retail VPN: Retail stores migrating from dialup connections for point-of-sale transactions
can use the Cisco 880 Series to take advantage of low-cost broadband access with the
required security to comply with payment card industry (PCI) and other data security
requirements. Multiple devices and applications can then be added to the store network to
take advantage of the increased bandwidth and also incorporate optional WLAN support to
enable secure mobility and enhance productivity.
●
Managed services: Service providers and value-added resellers can use the Cisco 880
Series as a platform to offer differentiated business-class security and WLAN services for
small to medium-sized business customers.
Features and Benefits
Table 3 lists the features and benefits of the Cisco 880 Series Integrated Services Routers.
Table 2.
Features and Benefits
Feature
Benefit
Increased Performance to
Run Concurrent Services
● The performance in a Cisco 880 Series router allows customers to take advantage of
broadband network speeds while running secure, concurrent data, voice, video, and
wireless services.
Enhanced Security
● Integrated stateful inspection firewall for network perimeter security
● High-speed IPSec 3DES and AES encryption for data privacy over the Internet
● Intrusion prevention to enforce security policy in a larger enterprise or service provider
network
● Content filtering offers category-based URL classification and blocking, thus providing
increased productivity and better use of company resources.
Redundant WAN Links
● Provides business continuity and WAN diversity with multiple WAN links: Fast Ethernet,
G.SHDSL, 3G, ISDN.
4-Port 10/100-Mbps
Managed Switch
● Allows multiple devices to be connected in a small office, with the ability to designate a port
as network edge.
● Optional external PoE adapter for powering IP phones and external access points, to avoid
individual power supplies or power injectors.
● VLANs allow for secure segmentation of network resources.
AUX/CONS Port
● Single dual-purpose port provides direct connection to a console or external modem for
management or backup access point.
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 13
Data Sheet
Feature
Benefit
Optional 802.11g/n Access
Point
● Broadband router with secure integrated access point in a single device.
● Integrated Wi-Fi Access Point with IEEE 802.11n draft 2.0 standard support for mobile
access to high-bandwidth data, voice and video applications through the use of multipleinput multiple-output (MIMO) technology that provides increased throughput, reliability and
predictability.
● Supports both autonomous and unified modes.
Real Time Clock
● Built-in real-time clock maintains an accurate date and time for applications that require an
accurate time stamp, such as logging and digital certificates.
Cisco Configuration
Professional
● Cisco Configuration Professional uses smart wizards and task-based tutorials, which can
be used by resellers and customers to quickly and easily deploy, configure, and monitor a
Cisco access router without requiring knowledge of the Cisco IOS Software command-line
interface (CLI).
Unified Wireless
Management
● Provides automated and simplified configuration and management of APs without manual
intervention
● Unified HREAP provides the following:
◦
WLAN services to remote and branch offices without deploying a wireless LAN controller
at each location
◦
Centrally configure and control unified WLAN services for remote offices through a wide
area network (WAN) link
◦
Allows flexibility in setting up wireless access at remote locations by specifying how
traffic is to be bridged or tunneled
Summary
Cisco 880 Series Integrated Services Routers combine increased network performance with
advanced security to allow small office customers to get the most from their broadband
connections. With models supporting different broadband technologies such as DSL, 3G, and
Metro Ethernet, the Cisco 880 Series can be deployed at any small office location. Optional
integrated 802.11g/n wireless capabilities provide true business-class WAN and WLAN access in
a single solution. With the Cisco 880 Series, enterprise IT managers and service providers can
take advantage of a solution that can be easily set up at the remote site and can be centrally
managed to reduce ongoing operational costs.
Product Specifications
Tables 3 through 5 list software and hardware features of the Cisco 880 Series.
Table 3.
Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default)
Feature
IP and IP Services
Features
Description
● Routing Information Protocol (RIPv1 and RIPv2)
● Generic routing encapsulation (GRE)/MGRE
● Cisco Express Forwarding
● 802.1d Spanning Tree Protocol
● Layer 2 Tunneling Protocol (L2TP)
● Layer 2 Tunneling Protocol Version 3 (L2TPv3)
● Network Address Translation (NAT)
● Dynamic Host Configuration Protocol (DHCP) server/relay/client
● Dynamic DNS
● DNS Proxy
● DNS Spoofing
● Access control lists (ACLs)
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 13
Data Sheet
Feature
DSL and ATM Features
(DSL Models Only)
Description
● ATM Variable Bit Rate/real-time (VBR-rt)
● ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate/non-realtime (VBR-nrt)
● ATM Operation, Administration, and Maintenance (OAM) Support for F5 Continuity Check;
segment and end-to-end loopback; and Interim Local Management Interface (ILMI) support
● Dying Gasp support
● TX ring adjustment
● VC bundling
● Per-VC queuing
● Per-VC traffic shaping
● 20 ATM virtual circuits
● RFC 1483/2684
● Point-to-Point Protocol over ATM (PPPoA)
● PPP over Ethernet (PPPoE)
Switch Features
● Auto MDI-MDX
● 8 802.1Q VLANs
● MAC Filtering
● 2-port 802.3af and Cisco compliant PoE
● Switch Port Analyzer (SPAN)
● Storm Control
● Smartports
Security Features
● Secure Connectivity:
◦
SSL VPN for secure remote access
◦
Hardware-accelerated DES, 3DES, AES128, AES192, AES256
◦
Public Key Infrastructure (PKI) support
◦
20 IPSec Tunnels
◦
Cisco Easy VPN Client and Server
◦
NAT transparency
● Zone-Based Policy Firewall
◦
VRF-aware stateful Inspection Routing Firewall
◦
Stateful Inspection Transparent Firewall
◦
Advanced Application Inspection and Control
● Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
QoS Features
● Weighted Fair Queuing (WFQ)
● Class-Based WFQ (CBWFQ)
● Policy-based routing (PBR)
● Class-Based QoS MIB
● CoS to DSCP mapping
Management Features
● Cisco Configuration Professional
● Cisco Configuration Express
● Cisco Configuration Engine support
● Cisco AutoInstall
● IP SLA
● Embedded Event Manager (EEM)
● CiscoWorks
● Cisco Security Manager
● Telnet, Simple Network Management Protocol (SNMPv3), SSH, CLI and HTTP management
● RADIUS and TACACS+
● Out-of-band management with ISDN S/T port or external modem through virtual auxiliary port
● WCS for management of Unified APs in models supporting WLAN
High-Availability
Features
● Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
● Hot Standby Router Protocol (HSRP)
● MHSRP
● Dial backup with external modem through virtual auxiliary port
● Dial backup with ISDN S/T port (DSL models only)
● 3G backup
Number of
Recommended Users
20
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 13
Data Sheet
Table 4.
Cisco IOS Software Features on Cisco 880 Series: WLAN Features (Available with Wireless
Option)
Feature
Description
● IEEE 802.11n draft 2.0 standard based access point with 802.11 b/g compatibility
● Automatic rate selection for 802.11g/n
WLAN Hardware
● Captive omnidirectional 2dBi gain dipole antennas
● 2x3 MIMO radio operation
● Wi-Fi 802.11n Draft v2.0 certified
● Autonomous Access Point
● WCS support for monitoring of autonomous mode access points
WLAN Software Features
● Maximize throughput or maximize range option
● Software-configurable transmit power
● Radio roles include access point, root bridge, non-root bridge, and workgroup bridge
● Wireless Multi Media Certification (WMM)
◦
TSPEC Call Admission Control to ensure voice quality is maintained
◦
Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency
● 802.11i
● Wi-Fi Protected Access (WPA) and AES (WPA2)
WLAN Security Features
● EAP Authentication: Cisco LEAP, PEAP, EAP-TLS, EAP-FAST, EAP-SIM, EAP-MD5, EAPTTLS
● Static and dynamic Wired Equivalent Privacy (WEP)
● Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption
● MAC authentication/filter
● User database for survivable local authentication using LEAP and EAP-FAST
● Configurable limit to the number of wireless clients
● Configurable RADIUS accounting for wireless clients
● PSK (Pre Shared Keys) (WPA-SOHO)
Certifications
SSIDs
16
Wireless VLANs
8
Encrypted Wireless
VLANs
8
MBSSIDs
16
Cisco IOS Software Advanced IP Services Feature Set (Optional Software Upgrade)
The Advanced IP Services software image has all the features of the Advanced Security software
image, with the addition of the following features.
Table 5.
Cisco IOS Software Features on Cisco 880 Series: Advanced IP Services Feature Set (Optional
Software Upgrade)
Feature
IP and IP Services
Features
Description
● Open Shortest Path First (OSPF)
● Border Gateway Protocol (BGP)
● Enhanced Interior Gateway Routing Protocol (EIGRP)
● VRF Lite
● NHRP
● BFD
● WCCP
Switch Features
● Dynamic and static port security
● Secure MAC address
● IGMPv3 snooping
● 802.1x
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 13
Data Sheet
Feature
Description
Security Features
● Secure Connectivity
◦
DMVPN
◦
Tunnel-less Group Encrypted Transport VPN
◦
VRF-aware IPSec
◦
SSL VPN
◦
IPSec over IPv6
◦
Adaptive Control Technology
◦
SIP Application Layer Gateway
● Cisco IOS Firewall
◦ VRF-aware Firewall
● Content Filtering
◦
Subscription based Content Filtering
◦
Websense and Smartfilter using WCCP
◦
Cisco IOS Software black and white lists
● Integrated Threat Control
QoS Features
◦
Intrusion prevention system (IPS)
◦
Control Plane Policing
◦
Flexible Packet Matching
◦
Network Foundation Protection
● Low-Latency Queuing (LLQ)
● Class-Based Traffic Shaping (CBTS)
● Class-Based Traffic Policing (CBTP)
● Class-Based Weighted Random Early Detection (CBWRED)
● Network-Based Application Recognition (NBAR)
● Link Fragmentation and Interleaving (LFI)
● Resource Reservation Protocol (RSVP)
● RTP Header compression (cRTP)
● Differentiated Services (DiffServ)
● QoS Preclassify and Pre-fragmentation
● HQoS
Metro Ethernet Features
● Ethernet Operations, Administration, and Maintenance (Ethernet OAM)
● Ethernet Local Management Interface (Ethernet LMI)
● Hierarchical QoS (HQoS)
IPv6 Features
● IPv6 addressing architecture
● IPv6 name resolution
● IPv6 statistics
● IPv6 translation-transport packets between IPv6-only and IPv4-only endpoints (NAT-PT)
● ICMPv6
● IPv6 DHCP
IPv6 Multicast Features
● Protocol Independent Multicast (PIM) Sparse Mode
● PIM Sparse-Dense Mode
● Auto Route Processing (Auto-RP)
Unified WLAN
Management
● Unified access point features:
◦
Supported by wireless LAN controller and WCS
◦
Configurable local or central switching for HREAP mode
◦
Radio management via WCS
◦
Seamless roaming with Mobility Groups
System Specifications
Table 6 lists the system specifications for the Cisco 880 Series Routers.
Table 6.
System Specifications
Feature
Specification
Default DRAM
256 MB on Cisco 880 Series Data Models
Maximum DRAM
768 MB
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 8 of 13
Data Sheet
Feature
Specification
Default and Maximum Flash Memory
128 MB on Cisco 880 Series Data Models
WAN
● Fast Ethernet
● G.SHDSL (2- and 4-wire support) with ISDN backup
● FE and 3G WAN for CDMA and GSM/UMTS
● G.SHDSL and 3G WAN for CDMA and GSM/UMTS
3G WAN types supported:
● CDMA—EVDO RevA / EVDO Rel0 / 1xRTT
● GSM/UMTS—HSDPA / UMTS / EDGE / GPRS
LAN Switch
Managed 4-port 10/100BASE-T with autosensing Media Device In/Media Device Cross
Over (MDI/MDX) for autocrossover
802.11g/n AP based on IEEE 802.11n
draft 2.0 standard
Optional on all models
Console/Auxiliary Port
RJ-45
1 USB 1.1 Port for Advanced Security
Features Such as Security Tokens, or
USB Flash
● 1 USB 1.1 port on Cisco 881 and Cisco 888 Series
● USB devices supported:
◦
USB eTokens
◦
USB Flash
● USB 1.1 port cannot be used for connecting external devices other than those
specified at:
http://www.cisco.com/en/US/partner/prod/collateral/modules/ps6247/product_data_sh
eet0900aecd80232473.htm
ISDN Basic Rate Interface (BRI) S/T
3G Express Card Modem2
● Available on:
◦
Cisco 888 for out-of-band management and dial backup or primary
◦
Supports point to point and point-to-multipoint configurations
● Available on:
◦
Cisco 881G for backup or primary
◦
Cisco 888G for backup or primary
External Power Supply
Universal 100 to 240 VAC input; 60W, 12VDC output
Inline PoE
Optional internal adapter for inline PoE on 2 switch ports for IP phones or external
wireless access points, 802.3af compliant and Cisco PoE compliant
G.SHDSL Specifications
● Conexant Chipset
● 2-wire and 4-wire modes supported
● Annex A and Annex B are supported starting with Cisco IOS Software Release
12.4(15)XZ
● Support for wetting current (Section A.5.3.3 of G.991.2)
● Support for dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for
signaling
● Symmetrical WAN speeds of 2.304 Mbps per pair
Wireless Specifications
● 2.4 GHz
Data Rates Supported
● 802.11b: 1, 2, 5.5, 6, 9, 11 Mbps
● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
● 802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, m0-m15
Maximum Transmit Power (2
Channel Aggregate)
● Note: Maximum power setting subject to changes by channel and by region
depending on regulations
● 802.11b 20 dBm
● 802.11g 17 dBm
● 802.11n 16 dBm
3G Specifications
Frequency Bands
● 850/1900 MHz for CDMA 2000 Rev A/ Rev 0 and CDMA 1xRTT
● 850/1900/2100 MHz for HSPA/UMTS/EDGE/GPRS
● 900/1800 MHz for EDGE/GPRS
Physical Dimensions and Weight
● Product dimensions:
● Nonwireless models:
◦
2
W X D X H = 12.8" x 9.8" x 1.9" (325mm x 249mm x 48mm) (includes rubber feet)
Availability 2Half Calendar 2008
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 9 of 13
Data Sheet
Feature
Specification
◦ W X D X H = 12.8" x 9.8" x 1.75" (325mm x 249mm x 44mm) (without rubber feet)
● Wireless models:
Power
◦
W X D X H = 12.8" x 10.4" x 1.9" (325mm x 264mm x 48mm) (includes rubber feet)
◦
W X D X H = 12.8" x 10.4" x 1.75" [325mm x 264mm x 44mm) (without rubber feet;
excludes antennas)
◦
Weight: 5.5 lb (2.5 kg) maximum
● Product power specifications:
◦
AC input voltage: 100 to 240 VAC
◦
Frequency: 50 to 60 Hz
◦
Maximum output power: 60W
◦
Output voltages: 12V DC
● Optional internal PoE with external adapter:
Approvals and Compliance
◦
Maximum output power: 80W
◦
Output voltage—external 48V DC
● •IEC 60950-1:2005, Second Edition, with all country deviations
● AS/NZS 60950-1:2003, First Edition
● CAN/CSA 22.2 No. 60950-1-05, Second Edition
● UL 60950-1, Second Edition, 2005
● EN55024
● Industry Canada CS-03
● TIA-968-A, Addendum 1, 2, 3, 4, 5
● EMI
● VCCI Class II
● IEC 1000-3-2
● UNI 3.1/4.0 PVC
● ITU G.991.2 G.SHDSL
● California Energy Commission (CEC) Compliant
● Australia and New Zealand:
◦
Australia AS/ACIF S031: 2001
◦
Australia AS/ACIF S043.1: 2003
◦
Australia AS/ACIF S043.2: 2006
◦
New Zealand PTC220: 2003
● The following are supported on Enterprise Teleworker Models:
AS/NRZ 3548:1992 Class B
◦
CFR 47 Part 15 Class B
◦
EN60555-2 Class B
◦
EN55022 Class B
◦
ICES-003, Issue 2, Class B, April 1997S
Certifications
Environmental Operating Range
● Nonoperating temperature: -4 to 149°F (-20 to 65°C)
● Nonoperating humidity: 5 to 95 percent relative humidity (noncondensing)
● Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
● Operating temperature: 32 to 104°F (0 to 40°C)
● Operating humidity: 10 to 85%, relative humidity (noncondensing)
● Operating altitude: 0 to 10,000 ft (0 to 3000m)
DSLAM Interoperability
Table 7 lists the Cisco supported Digital Subscriber Line Access Multiplexers (DSLAMs) for the
Cisco 888 Series.
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 13
Data Sheet
Table 7.
G.SHDSL DSLAM Interoperability
DSLAM (Chipset) ECI Hi-Focus SAM 480
(Infineon)
Alcatel ASAM7300
(Conexant)
Lucent Stinger
(Conexant)
Siemens Hix-5300
(Infineon)
Modes
2-Wire
4-Wire
2-Wire
4-Wire
2-Wire
4-Wire
2-Wire
4-Wire
888
X
X
X
X
X
X
X
X
Ordering Information
Table 8 lists ordering information for the Cisco 880 Series. To place an order, visit the
Cisco ordering homepage.
Table 8.
Ordering Information
Part Number
Product Name
Ethernet
CISCO881-K9
Cisco 881 Ethernet Security Router
CISCO881W-GN-A-K9
Cisco 881 Ethernet Security Router 802.11n FCC Compliant
CISCO881W-GN-E-K9
Cisco 881 Ethernet Security Router 802.11n ETSI Compliant
CISCO881W-GN-P-K9
Cisco 881 Ethernet Security Router 802.11n Japan Compliant
G.SHDSL
CISCO888-K9
Cisco 888 G.SHDSL Router with ISDN backup
CISCO888W-GN-A-K9
Cisco 888 G.SHDSL Wireless Router with ISDN backup; 802.11n FCC Compliant
CISCO888W-GN-E-K9
Cisco 888 G.SHDSL Wireless Router with ISDN backup; 802.11n ETSI Compliant
Enterprise Teleworker
CISCO881-K9
Cisco 881 Ethernet Security Router
CISCO881W-GN-A-K9
Cisco 881 Ethernet Security Router 802.11n FCC Compliant
CISCO881W-GN-E-K9
Cisco 881 Ethernet Security Router 802.11n ETSI Compliant
CISCO881W-GN-P-K9
Cisco 881 Ethernet Security Router 802.11n Japan Compliant
POE
800-IL-PM=2
2 port 802.3af capable inline power module for 880 routers
DRAM
MEM8XX-256U512D
256-MB DRAM upgrade to 512 MB for Cisco 880 Series Routers
MEM8XX-256U768D
512-MB DRAM upgrade to 768 MB for Cisco 880 Series Routers
Router Software
C880data-universalk9-mz
Universal image for Cisco 880 ISR Data Router Series
Access Point Software
ap801-k9w7-tar
Autonomous software image for ap801
ap801-rcvk9w8-tar
LWAPP recovery image for ap801
Software License for Cisco 880 Data
SL-880-ADSEC (default)
Cisco 880 Advanced Security Image Feature License
SL-880-AIS (upgrade option)
Cisco 880 Advanced IP Services Image Feature License
Security Services
Content Filtering
SL-CNFIL-88x-1Y(=)
One year subscription to Content Filtering for Cisco 881/888—URL/Phishing
SL-CNFIL-8xx-2Y(=)
Two year subscription to Content Filtering for Cisco 881/888—URL/Phishing
SL-CNFIL-8xx-3Y(=)
Three year subscription to Content Filtering for Cisco 881/888—URL/Phishing
SL-CNFIL-8xx-TRI(=)
30 day free trial license for 88x series
SSL
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 11 of 13
Data Sheet
Part Number
Product Name
FL-WEBVPN-10-K9(=)
Feature License SSL VPN for Up to 10 Users (incremental)
Cisco License Manager is a secure client/server-based application that can be used to manage
Cisco IOS Software activation and licenses. For more information about Cisco License Manager,
visit http://www.cisco.com/go/clm.
Table 9 gives the Cisco IOS Software images for the Cisco 880 Data Series Routers.
Table 9.
Cisco IOS Software Images for the Cisco 880 Data Series Routers
Series
Models
Image
Default Feature
License
First Cisco IOS
Software Release
C880data-universalk9mz
SL-880-ADSEC
12.4(15)XZ; S880D-UK912415XZ
ap801-k9w7-tar
–
12.4(10b)JA2
Router Software
Cisco 880 ISR Data Cisco 881, Cisco 888,
Series
Cisco 881G, Cisco 888G
Access Point Software
ap801
Cisco 881, Cisco 888,
Cisco 881G, Cisco 888G
Cisco Services
Leading-edge technology deserves leading-edge support. Cisco offers a wide range of services
programs to accelerate customer success. These innovative services programs are delivered
through a unique combination of people, processes, tools, and partners, resulting in high levels of
customer satisfaction. Cisco Services help you protect your network investment, optimize network
operations, and prepare your network for new applications to extend network intelligence and the
power of your business.
®
Cisco SMARTnet Service technical support for the Cisco 880 Series is available on a one-time or
annual contract basis. Support options range from help-desk assistance to proactive, onsite
consultation. All support contracts include:
●
Major Cisco IOS Software updates in protocol, security, bandwidth, and feature
improvements
●
Full access rights to Cisco.com technical libraries for technical assistance, electronic
commerce, and product information
●
24-hour-a-day access to Cisco’s large, dedicated technical support staff
For more information about Cisco services, refer to Cisco Technical Support Services or
Cisco Advanced Services.
For More Information
For more information regarding Cisco 880 Series Integrated Services Routers and options, contact
your Cisco representative or go to http://www.cisco.com/go/isr.
To upgrade the Cisco IOS Software for the Cisco 880 Series Integrated Services Routers, visit the
Cisco Software Center.
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 12 of 13
Data Sheet
For more information about Cisco products, contact:
●
United States and Canada: 800 553-6387
●
Europe: +32 2 778 4242
●
Australia: +61 2 9935 4107
●
Other: 408 526-7209
●
Web: http://www.cisco.com
Printed in USA
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-459542-00 04/08
Page 13 of 13
Download PDF
Similar pages