ZyPerUHD User Manual - Audio Visual Distributors

ZyPerUHD
4K IP VIDEO DISTRIBUTION SYSTEM
User Manual
Updated July 2017
Document symbol conventions:
Indicates an important piece of information affecting the operation of the unit.
Retain this information.
Indicates a point of caution. Failure to heed this information may cause a
hazard of some form to the operator or others in the field of operation.
Indicates a point regarding the electrical safety of the box. Failure to abide by
the information presented may result in an electrical shock hazard to the
operator or others in the field of operation.
Indicate a point affecting the RF performance of the box. Failure to heed or
abide by the information presented may result in emissions or susceptibility
that can affect the unit or nearby equipment. Performance conforming to the
regulatory limit may be compromised or affected.
About ZeeVee:
ZeeVee is the leading manufacturer of high-quality encoder/modulator/decoder products for
video distribution over any type of transmission media; be it RF coax, fiber, or copper ethernet.
Established in 2007, ZeeVee has been manufacturing industry-leading products while operating
the company responsibly in compliance with the strictest levels of regulatory and environmental
requirements. The standards by which we govern our corporate conduct are far higher than that
required by law.
Our mission is to completely fulfill the toughest customer application requirements with the
highest quality products we can produce. After the sale, we strive to support the customer with
award-winning support and service. Our goal is that no customer shall be ever be dissatisfied.
It is both our mission and our passion.
ZeeVee, Incorporated
295 Foster Street, Suite 200
Littleton, Massachusetts
01460, USA
www.zeevee.com
support@zeevee.com
Phone: 1-877-493-3833
ii
CONTENTS
System Description ..............................................................................1
ZyPerUHD Features.............................................................................2
Package Contents........................................................................................3
System Elements .................................................................................4
Encoder Function .........................................................................................4
Decoder Function.........................................................................................4
Management Platform..................................................................................6
Detailed Interface Descriptions ............................................................7
Encoder........................................................................................................7
Enclosure .........................................................................................7
Ports (Encoder Back) ........................................................................7
Ports (Encoder Front) ........................................................................8
Decoder .......................................................................................................9
Enclosure ..........................................................................................9
Ports (Decoder Back) ........................................................................9
Ports (Decoder Front) .....................................................................10
Switch Requirements .........................................................................11
Setting up ZyPerUHD.........................................................................12
USB Details ........................................................................................13
Device Technical Specifications .........................................................14
Encoder and Decoder HDMI Video Specifications.......................... 14
Physical and Environmental ............................................................15
General Safety and Care Instructions ................................................16
Safety .........................................................................................................16
Cleaning .....................................................................................................18
Encoder, Decoder and ZyPerMP Unit Cleaning Procedures ..........18
ZyPerMP Specific Cleaning Procedure ...........................................19
Important Siting and Application Considerations................................20
ZyPerUHD Equipment Type and Uses ......................................................20
iii
Installation Environment.............................................................................21
Mounting Options ............................................................................21
Ventilation ........................................................................................21
Water and moisture ........................................................................22
AC Mains Connection ................................................................................23
AC Power Cord ...............................................................................24
Responsibility and Stewardship .........................................................25
Reduction of Hazardous Substances (RoHS) ...........................................25
Waste Electrical and Electronic Equipment ...............................................25
FCC Compliance Statement ..............................................................27
EMC Information ................................................................................28
Electromagnetic Emissions ........................................................................28
Disclaimers .........................................................................................29
iv
ZyPerUHD
System Description
The ZyPerUHD series of products from ZeeVee provide a means for transmitting and receiving
audio-visual information across a standard IP network with outstanding quality at very low
latencies.
A minimal system consists of:
• Video Source
• ZyPerUHD Encoder device
• CatX Cable
• ZyPerUHD Decoder device
• Video sink (display device)
A fully realized system consists of:
•
•
•
•
•
•
(N) Video Sources
(N) ZyPerUHD Encoder devices
1Gb Ethernet switching Infrastructure (> (N+M) ports of non-blocking capacity)
(M) ZyPerUHD Decoder devices
(M) Video sink (display devices)
ZyPerMP control node
User Manual
Page 1 of 29
ZyPerUHD
ZyPerUHD Features
• Distributes and switches 4K UHD AV signals via standard gigabit Ethernet networks
• Supports HDMI input and output resolutions up to 3840 x 2160@60Hz 4:2:0,
3840 x 2160@30Hz 4:4:4
• Supports streaming resolutions up to 3840 x 2160@30Hz 4:4:4
• Supports 7.1 channel audio
• HDCP 2.2 compliant
• Support Video walls up to 5 x 5
• Flexible routing policies, allowing audio, video together with IR, and USB signals to be routed
separately or as a whole throughout the matrix system
• Capable of outputting IP streams that can easily be decoded and viewed on multiple decoders
• Allows AV, USB, IR, RS232 and power signals to be delivered up to 328 ft (100 m) over a
single Cat 6 cable or above. (Cat 6a and above recommended)
• 1~2 fps latency
• Supports independent balanced analog audio input and output at 2 channels, 24 bits@48 kHz/
channel
• Supports bi-directional serial, allowing control of remote RS232 devices from both sides of
encoders and IP controller
• Supports bi-directional IR, allowing control of remote source and display devices from both
sides of encoders and decoders
• Encoder offers a USB type B port to directly connect to a PC and complies with USB 2.0
standard
• Decoder offers two USB type A ports to directly connect to a keyboard and a mouse and
complies with USB 2.0 standard, providing +5 VDC at up to 500 mA to connected USB
peripherals.
• Offers point-to-point, point-to-multipoint, multipoint-to-point, multipoint-to-multipoint
applications
• Supports PoE to be remotely powered by compatible power source equipment such as a PoEenabled Ethernet switch, eliminating the need for a nearby power outlet
• Features CEC function, remotely allowing the TVs to be set to turn on and enter standby
mode using IP controller's API commands
User Manual
Page 2 of 29
ZyPerUHD
Package Contents
Encoder
1 x ZyPerUHD-E
1 x Power Adapter (12 VDC 1A)
1 x Phoenix Port (Male, 3.5mm, 3 pins)
2 x Phoenix Port (Male, 3.5mm, 5 pins)
1 x IR Emitter (3.9 ft - 1.2m)
1 x IR Wideband Receiver (3.9 ft - 1.2m, 30kHz ~ 50 kHz)
2 x Mounting Ear
Decoder
1 x ZyPerUHD-D
1 x Power Adapter (12 VDC 1A)
1 x Phoenix Port (Male, 3.5mm, 3 pins)
1 x Phoenix Port (Male, 3.5mm, 5 pins)
1 x IR Emitter (3.9 ft - 1.2m)
1 x IR Wideband Receiver (3.9 ft - 1.2m, 30kHz ~ 50 kHz)
2 x Mounting Ear
User Manual
Page 3 of 29
ZyPerUHD
System Elements
Encoder Function
The function of the ZyPerUHD Encoder Device (Encoder) is to accept audio and video data over
a variety of interface types, and translate that data to a format suitable for transmission over a
standard 1Gb Ethernet network.
Video data is segmented, compressed using JPEG2000, prepared for transmission, and sent by
the Encoder unit. No unit other than those so designated by the control entity shall be able to
receive the video stream sent by an Encoder.
The format of the IP data is fully in compliance with industry-standard IEEE 802.3 Ethernet
networking practices. Any switch or device capable of passing 1Gb Ethernet traffic can be
employed to carry ZyPerUHD A/V traffic.
Other ports on the Encoder devices are for the carriage of USB, IR, RS232 and audio data.
Common Interfaces on all Encoders:
• Power Input (12VDC)
• RS232 Input/Output (Phoenix connector
with supplied adapter)
• Analog Audio Input/Output (Phoenix
•
•
•
•
•
connectors with supplied adapters)
Infrared Input/Output
HDMI Input
HDMI Output (loop-out)
USB Type-B interface
1Gb Ethernet port (RJ45 with PoE)
Decoder Function
The function of the ZyPerUHD Decoder device (Decoder) is to accept 1Gb Ethernet traffic that
represents the information to be decoded and displayed. When the appropriate IP stream is
received the Decoder unit will decompress it, reformat the video and audio information for
display and play it out its HDMI video output. Audio is also played out the appropriate port as
included.
Other ports on the Decoder devices are for the carriage of USB, IR, RS232 and audio data
User Manual
Page 4 of 29
ZyPerUHD
Common Interfaces on all Decoders:
•
•
•
•
•
•
•
Infrared Input/Output
HDMI Output
1Gb Ethernet (RJ45 with PoE)
2 USB Type-A Interfaces
Analog Audio Output
RS232 Input/Output
Power Input (12VDC)
User Manual
Page 5 of 29
ZyPerUHD
Management Platform
Most installations will require a ZyPer Management
Platform (ZyPerMP). This device controls the
operation and manages the connectivity between
endpoints. The management platform is a
hardened controller node that must reside on the
same logical network as the ZyPerUHD Encoders
and Decoders. It runs a ZeeVee application as its
sole function. The application presents an API to
potential third party management platforms as well
as hosting its own Maestro-Z management
application.
Any installation beyond simple point-to-point link extension-like applications require a ZyPerMP.
The purpose of the Management Platform is to interface user operational requests into the
specific device-level control needed to effect connectivity changes, screen management,
interface management, and distribute software and control data to all the endpoints of the
overall system. The ZyPerMP is the entity that insures all the endpoints, are accounted for,
operating properly, and performing the correct operation at the correct time.
Further, the ZyPerMP is the element that guarantees security, manages access to the overall
system and prevents rogue listeners or observers from snooping or spoofing unwanted content.
Multiple ZyPerMP devices may be deployed in a redundant configuration to provide for fault
tolerant control of the greater ZyPerUHD overall system.
Operation of the ZyPerMP, the Maestro-Z application, and the ZyPer-API are beyond the scope
of this manual and are documented separately in far greater detail in the ZyPer Management
Platform User Manual. Documentation can be downloaded from the ZeeVee website.
https://www.zeevee.com/documentation-all-products
User Manual
Page 6 of 29
ZyPerUHD
Detailed Interface Descriptions
Encoder
The function of the encoder is to accept raw video images, encode, encrypt and format them for
transmission.
Enclosure
There is one size of the ZyPerUHD Encoder unit enclosure.
Input Function
Box Size
HDMI Input
Base unit: 200mm Wide x 25mm High x 120mm Deep
Ports (Encoder Back)
A
Port Name
B
C
D
E
F
G
H
I
J
Index Definition
Power
A
12VDC from supply. Center Post is + Ring is -
Ethernet
(PoE)
B
1Gb Ethernet over Cat6 (or better) cabling. RJ45 with PoE.
Audio In
C
Audio Input connector. Input of balanced stereo audio on Phoenix connector.
Audio Out
D
Audio Output connector. Output of balanced stereo audio on Phoenix
connector.
RS232
E
RS232 Control Port for sending and receiving side-band serial traffic to/from
decoders as directed by Maestro-Z management.
USB
F
USB 2.0 Type B port. Configuration and routing of USB handled by the
Maestro-Z configuration.
User Manual
Page 7 of 29
ZyPerUHD
Port Name
Index Definition
HDMI Input
G
HDMI 2.0a input port capable of up to 4KP60 4:2:0 with embedded audio and
HDCP 2.2 encryption.
HDMI
Output
H
HDMI loop-out of video/audio received on HDMI Input port.
IR Input
I
Infrared Commands to be passed TO Decoders as configured by Maestro-Z.
IR Output
J
Infrared Commands information passed FROM Decoders to Encoders as
configured by Maestro-Z.
Ports (Encoder Front)
A
B
Port Name
Index Definition
Power LED
A
LED illuminated when unit is powered.
Status LED
B
LED Illuminated when active video is being processed.
User Manual
Page 8 of 29
ZyPerUHD
Decoder
The function of the ZyPerUHD Decoder is to accept a 1Gb IP feed containing the video
information to be displayed. It decodes and formats the video and audio information for display
on the attached viewing device.
Enclosure
There is one size of the ZyPerUHD Decoder unit enclosure.
Input Function
Box Size
HDMI Output
Base unit: 200mm Wide x 25mm High x 120mm Deep
Ports (Decoder Back)
A
Port Name
B
Index
C
D
E
F
Definition
Power
A
12VDC from supply. Center Post is + Ring is -
Ethernet
(PoE)
B
1Gb Ethernet over Cat6 (or better) cabling. RJ45 with PoE.
Audio Out
C
Audio Output connector. Output of balanced stereo audio on
Phoenix connector.
RS232
D
RS232 Control Port for sending and receiving side-band serial
traffic to/from decoders as directed by Maestro-Z management.
User Manual
Page 9 of 29
G
ZyPerUHD
Port Name
Index
Definition
HDMI Out
E
HDMI 2.0a output port capable of up to 4KP30 4:4:4 with
embedded audio and HDCP 2.2 encryption.
IR Input
F
Infrared Commands to be passed TO Encoders as configured by
Maestro-Z.
IR Output
G
Infrared Commands information passed FROM Encoders to
Decoders as configured by Maestro-Z.
Ports (Decoder Front)
A
B
C
Port Name
Index
Power LED
A
LED illuminated when unit is powered.
Status LED
B
LED Illuminated when active video is being processed.
USB
C
2 ports of USB 2.0 Type-A connectivity. Either port may be used
and both operate simultaneously.
User Manual
Definition
Page 10 of 29
ZyPerUHD
Switch Requirements
When the ZyPerUHD series deliver 4K video, momentary transfer rates may reach as high as
850 Mbps, which requires a gigabit Ethernet switch. (Date rates and compression depend on
the resolution, color space and refresh rate of the input video stream.)
Switches must support the following features:
• Multicast forwarding or filtering
• IGMP Snooping
• IGMP Querier
• IGMP snooping fast leave
• Jumbo frame(8000 bytes or larger)
Configure switches features based on the table below:
Feature of Switch
Parameters
Green or energy-saving feature
Disable
Multicast forwarding or filtering
Enable
IGMP Snooping
Enable
IP address of IGMP Querier
Must be assigned a valid value
IGMP Querier
Enable
IGMP snooping fast leave
Enable
Validate IGMP IP Header
Disable
Dynamic multicast router port
Disable
Jumbo Frame or (Frame Size)
Enable or set to 8000 bytes or larger
Note: Different brands of models of switches may have different names of the previous features.
User Manual
Page 11 of 29
ZyPerUHD
Setting up ZyPerUHD
A many to many, or switched environment involves connecting many sources to many displays.
ZyPerUHD allows you a flexible and scalable amount of input-output options without limitations.
For example, in a 24-port configuration, you can configure a 1x23, 6x18, or 4x20 (and so on)
system. A network switch is needed in these many to many configurations. These environments
also require configuration through the ZyPerUHD management software.
To set up ZyPerUHD in a many to many environment, you have to:
• Install ZyPerUHD management software
• Connect all Encoders and Decoders to the 1Gb network switch
• Switch (or route) video from sources to displays
Please consult the ZyPer Management Platform User Manual for additional details on
switching/routing video from sources to displays.
https://www.zeevee.com/documentation-all-products
User Manual
Page 12 of 29
ZyPerUHD
To set up ZyPerUHD in a point-to-point environment, you have to:
• Install ZyPerUHD management software (ZyPerMP)
• Connect the Encoder and Decoder to the 1Gb network switch
• Switch (or route) video from source to display
• Disconnect the Encoder and Decoder from the 1Gb network switch
• Connect the Encoder and Decoder to each other via the network cable
USB Details
The ZyPerUHD provides for USB-over-LAN communications.
The ZyPerUHD Encoder contains a USB Hub while the ZyPerUHD contains a USB Host. This
configuration provides support for up to 4 USB devices.
Device types include the following:
USB Keyboard
USB Mouse
USB Pen Table & Signature Pad
USB Card Readers
USB Flash Memory
USB Hard Disk
USB CD-ROM
Encoder
PC
User Manual
USB
Hub
CPU
Decoder
NIC
Page 13 of 29
NIC
CPU
USB
Host
USB
Devices
ZyPerUHD
Device Technical Specifications
Encoder and Decoder HDMI Video Specifications
All encoders and decoders have at least one exposed HDMI port. There is an input and output
on the encoder and an output on the decoder. All the parameters in terms of the formats of
video and audio carried are the same for either.
HDMI
ZyPerUHD
Enc
HDMI Standard Port
Direction
✓
Dec
✓
✓
HDMI 2.0 with HDR and HDCP2.2 Support
Input
✓
✓
Output
Connector
✓
✓
Type-A receptacle (female)
HDMI Resolutions
✓
✓
Supports all major VESA resolutions and variations
including:
640x480
(p/i)
720x576
(25Hz/50Hz)(p/i)
800x600
(p)
1024x768 (p)
1280x720 (p/i)
1280x1024 (p)
1366x768 (p)
1440x1080 (p)
1600x1200 (p)
1920x1080 (p/i)
3840x2160 (p)
Note: 4K@60Hz 4:2:0 for encoder inputs
Note: 4K@30Hz 4:4:4 for decoder outputs all at 24/25/29.97/30/50/59.94/60Hz refresh rates except
where noted
HDMI Audio
✓
✓
Dolby 5.1/Dolby True HD/Dolby Digital Plus, DTS 5.1/
DTS HD/DTS True HD, LPCM2.0/LPCM2.1/LPCM5.1/
LPCM 7.1
Additional restrictions may result from the audio
supported at encoder’s input.
User Manual
Page 14 of 29
ZyPerUHD
Physical and Environmental
The following parameters apply to all encoders and decoders unless specifically stated
otherwise.
Type
Parameter
A/C Adapter
100-1240VAC 50-60Hz 0.7-0.45A draw on AC Mains
Output Max: 12VDC 1.0A
ZyPerUHD unit
power consumption
6W
Powered via either PoE or power adapter.
Dimensions
200mm Wide x 25mm High x 120mm Deep
Weight
740g (1.63 lb)
Operating
Temperature
0° C to +45° C (32° F to 113° F)
Non-Operating Temp
-20° C to +70° C (-4° F to +158° F)
Humidity (op/
storage)
10% to 90% (Non-Condensing)
ESD Protection
HBM
+/- 8 kV (air-gap discharge)
+/- 4 kV (contact discharge)
Surge Protection
Voltage: +/- 1kV
Group Pulse
Protection
Voltage: +/- 2kV
Certification
CE, FCC, RoHS compliant
User Manual
Page 15 of 29
ZyPerUHD
General Safety and Care Instructions
Safety
WARNING: When using electronic products, basic precautions should always be
followed, including:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with in accordance with cleaning instructions included in this manual.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions for spacing and clearance to allow proper airflow.
Do not install or place this product near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the grounding-type plug. A grounding type
plug has two blades and a third grounding prong. The third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Power cord must be accessible to allow for the removal of the power from the unit.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where cords exit from the apparatus.
Unplug this apparatus during lightning storms.
Unplug this apparatus when unused for long periods of time.
Only use attachments/accessories supplied or specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or excessive moisture, does not
operate normally, or has been dropped.
WARNING: To reduce the risk of fire or electric shock do not operate this
apparatus in a position where it is exposed to dripping or splashing
liquids, rain, moisture, or excessively high humidity. Objects containing
liquid shall not be placed in proximity to the unit such that they present a
risk of spillage onto the apparatus.
User Manual
Page 16 of 29
ZyPerUHD
Shock and Fire Hazard:
The unit’s metal case, power supply, and grounding terminals and lugs are essential in
containing radio energy as well as safeguarding the user from any risk of electrical shock. The
metal shell of the unit protects the internal circuitry from environmentally induced over stress
conditions and is an integral part of the compliant system.
WARNING: Do not open the box or in any way expose the internal
circuitry.
WARNING: There are no user-serviceable parts inside
the unit. Opening or damaging the ZyPerUHD unit in any
way voids the warranty and immediately nullifies any
assertion of regulatory compliance made by ZeeVee.
Any required service shall be performed by trained and
qualified service personnel authorized by ZeeVee.
User Manual
Page 17 of 29
ZyPerUHD
Cleaning
Encoder, Decoder and ZyPerMP Unit Cleaning Procedures
Before cleaning:
1.Switch off or fully disconnect the AC power from the external supply unit
connector to the ZyPer unit.
2.If the state of the AC power cannot be established, disconnect the DC
input plug from the ZyPer unit before proceeding.
Cleaning Procedure:
1. Any unused cable receptacles should be covered with the supplied rubber plugs or a piece
of tape to prevent cleaner from entering and possibly affecting operation.
2. Clean the exterior of the unit with a soft cotton cloth that has been lightly moistened with an
approved and recognized cleaning agent.
The exterior of the unit has been tested for compatibility with, and resistance to, the
following products:
✦ Alcohol (Isopropyl and Ethyl)
✦ Ammonia-based cleaners (Windex)
In case none of the above cleaning products is available, water may be used.
User Manual
Page 18 of 29
ZyPerUHD
Care should be taken to not spray cleaner directly on to the unit or into the vents to avoid
liquid ingress and damage to the internal electronics.
CAUTION: Do not apply or spray liquid directly on
to the unit’s exterior as excess liquid may cause
damage to internal electronics. Apply the liquid to
the cleaning cloth first.
3. Repeat with water-moistened cloth only.
4. Wipe with a dry cloth
5. Air vents shall be checked to make sure that they are free of accumulated lint or blockages.
Should the air vents appear clogged use a vacuum cleaner with a soft-bristle brush
attachment to loosen and draw the debris out of the vents and away from the unit.
Do not loosen and blow the debris in to the unit as internal buildup of debris will degrade
the ability of the unit to cool itself and reliability may be adversely affected.
Do not apply power if there is any evidence of fluid in the interior of the unit. ZyPerMP Specific Cleaning Procedure
The ZyPerMP control unit is not designed to be placed in an environment
that would subject it to impurities that require as frequent cleaning as the
encoder and decoder units. Should the ZyPerMP unit need cleaning, the
same procedures apply as enumerated above, only a very sparing amount
of cleaner should be applied to the cleaning cloth.
User Manual
Page 19 of 29
ZyPerUHD
Important Siting and Application Considerations
ZyPerUHD Equipment Type and Uses
ZyPerUHD Intended Uses
• Equipment is intended for the distribution of Audio Visual Information in and around
•
•
•
•
a facility.
Equipment is intended to distribute Human Interface and control information over the
same network as the Audio Visual information following the same or different logical
distribution paths.
Equipment does not generate video information itself, but accepts and distributes
video information from industry-standard devices which generate such audio visual
information.
Equipment is intended for the sophisticated display and presentation of decoded
information that has been distributed by companion ZyPerUHD equipment.
Equipment is intended to be controlled from a central control node (the ZyPerMP)
which ties in to a customer control system for sophisticated presentation and
management of the information flow and direction.
WARNING: The installer should test and validate a complete setup with
the actual devices before deploying to a final production installation. User Manual
Page 20 of 29
ZyPerUHD
Installation Environment
The general area where the ZyPerUHD unit is to be installed shall be clean and free of
obstructions or clutter.
Mounting Options
• Unit may be mounted horizontally on the installed rubber feet
• Unit may be bolted to a horizontal surface using the provided L-brackets with or
•
•
•
•
without feet installed.
Unit may be mounted vertically only if appropriate clearance is provided around the
grille work for adequate airflow. The appropriate ZyPerUHD rack mount kits insure
that airflow space is sufficient when mounting vertically.
Units may be stacked in a horizontal orientation providing stack is no higher than 3
units when using the provided rubber feet
• Greater stacking requires that the user remove the rubber feet and externally
bracing the stack of units.
In all cases, insure that the units are rigidly held in place and will not be subject to
impact and there is no possibility of toppling.
Do not stack any other equipment or devices on top of the unit weighing more than
3Kg and only if sufficient bracing is provided to protect against toppling.
WARNING: Failure to adhere to these recommendation could result in
unsafe operation, damage to the equipment, or injury to the operators.
Ventilation
Ambient environmental temperature and humidity shall not exceed that specified in the Detailed
Specifications portion of this document.
Ambient temperature in this case refers to the temperature of air entering the device through the
ventilation grille. Care should be taken to not enclose the device or deploy in an fashion where
airflow loops or local “hot spots” can cause the inlet air to rise above the specified limit for
normal operation.
In general 25mm (≈ 1inch) of clearance should be provided around the ventilation openings
unless an external air mover insures that the inlet temperature is at or below the specified limit.
If the equipment is mounted in an enclosed cabinet, it is the job of the installer to insure that
within the cabinet or enclosure the ZyPerUHD equipment does not experience local
temperatures in excess of that specified in the Detailed Specifications portion of this document.
User Manual
Page 21 of 29
ZyPerUHD
Water and moisture
Never expose the ZyPerUHD unit to direct rain, moisture, or excessively high humidity. Never use the device near water - e.g. near a bathtub, basin, pool, sink, or in a wet basement. Clean only in accordance with the instructions in this manual.
User Manual
Page 22 of 29
ZyPerUHD
AC Mains Connection
The ZyPerUHD Encoder and Decoder units are powered through an external AC/DC converter
unit or via the Ethernet PoE feature.
If PoE is not available, the Encoder and Decoder units must be powered and connected using
the supplied external AC/DC converter. The voltage supplied to the Encoder and Decoder units
from the external supply is 12VDC at less than 1.0A
• Do not substitute the supplied AC/DC power supply unit with another component.
The overall system compliance is dependent on each of the provided elements
being present and operational.
INFORMATION: The introduction of a foreign, non-ZeeVee element nullifies
any claim of regulatory compliance asserted by ZeeVee.
The AC/DC power supply shall be powered from the appropriately rated AC mains
voltage which allows for a wide range of input, generally from 100VAC through 240VAC.
Only use a power cord with an appropriately rated protective earth connection. The protective
earth connection is essential to the overall safety of the system.
WARNING: Bypassing or omitting the protective earth
connection increases the risk of electrical shock and
radio emissions
Install the equipment in such a manner as the IEC power cord ingress in to the AC/DC adapter
is accessible as this is the boundary of the AC mains system and the point at which the
ZyPerUHD equipment is disconnected from the AC mains power if needed.
The equipment should be installed as near as is practicable to an AC outlet.
• Do not substitute or extend the DC cable from the AC/DC unit.
The ZyPerUHD system is intended and rated for continuous operation
Should the ZyPerUHD equipment be unused for an extended period of time it should be
disconnected from the AC mains at the AC inlet to the external AC/DC converter in order to
protect the equipment from transient over-voltage conditions.
User Manual
Page 23 of 29
ZyPerUHD
AC Power Cord
Connect the external AC/DC supply unit to the AC mains with a UL-listed detachable power
cord, 3-wire, type SJ or equivalent, 18 AWG min., rated 250 V min., plug 5-15P configuration for
120V application, or 6-15P for 240V application.
AC/DC converter inlet side of AC cord shall be of type IEC320C13
•Do not overload wall outlets and extension cords.
Power cords should be routed so that they are not likely to be walked upon or
pinched by items placed upon or compressing them.
Match the rating of the power cord to the voltage of the power outlet in
accordance with the specific requirements and in compliance with safety standard of your
particular country.
User Manual
Page 24 of 29
ZyPerUHD
Responsibility and Stewardship
ZeeVee is committed to using the planet’s resources efficiently and having as little negative
impact on the environment and health of mankind as possible.
Our products consume very little energy and attempt to provide the highest level of function for
the smallest investment in resources.
Reduction of Hazardous Substances (RoHS)
RoHS Directive 2011/65/EC, Directive 2002/95/EC, Directive 2003/11/EC
Product Lines:
ZyPer Products supplied by ZeeVee, Inc.
Be advised that based on the information available to ZeeVee from our component and subassembly providers, the product lines listed above do not contain as intentional additives, any of
the referenced materials at the levels indicated, as referenced in the subject EU directives. To
the best of our knowledge, none of these materials are generated during production and the
supplied component parts of the ZeeVee products do not contain the listed materials. Since we
do not expect these materials to be present, we do not specifically run a complete analysis on
all finished goods, excepting for periodically auditing the finished goods and component
materials in certain circumstances.
This information is believed to be accurate and refers to the laws, regulations and products at
the date of issue. However, ZeeVee makes no express or implied representations or warranties
with respect to the information contained herein. It is the responsibility of our customers to
determine that their use of ZeeVee products is safe, lawful, and technically suitable for their
applications. Because of possible changes in the laws and regulations, we cannot guarantee
that the status of the listed products will remain unchanged.
Waste Electrical and Electronic Equipment
WEEE Directive 2012/19/EU on waste electrical and electronic equipment
The WEEE Directives (2008/98/EC and 2012/19/EU) place an obligation on electrical equipment
manufacturers and importers to recycle electronic products at the end of their useful life.
User Manual
Page 25 of 29
ZyPerUHD
ZeeVee products that are marked with the WEEE symbol
(see left) indicate that the product must NOT be
disposed of with other household waste. Instead, it is the
user’s responsibility to dispose of their waste electrical
and electronic equipment by handing it over to an
approved re-processor or by returning it an authorized
agent of ZeeVee or their distributor for recycling. To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them
responsibly
For more information about the the recycling of this
product, please contact your local waste disposal
authorities or local municipal waste disposal service.
For specific questions related to WEEE compliance of
ZeeVee products contact: support@zeevee.com
This information is believed to be accurate and refers to
the laws, regulations and products at the date of issue. However, ZeeVee makes no express or
implied representations or warranties with respect to the information contained herein. It is the
responsibility of our customers to determine that their use of ZeeVee products is safe, lawful,
and technically suitable for their applications. Because of possible changes in the laws and
regulations, we cannot guarantee that the status of the listed products will remain unchanged.
ZeeVee, Inc.
295 Foster Street, Littleton, MA 01460
User Manual
Page 26 of 29
ZyPerUHD
FCC Compliance Statement
The ZyPerUHD family of devices has been tested and found to comply with the limits for Class A
Digital Devices pursuant to Part 15 of the FCC Rules. Operation is subject to the following
conditions: 1) these devices may not cause harmful interference, and 2) these devices must
accept any interference received including interference that may cause undesired operation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed or
used in accordance with the instructions, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. reorient or relocate the receiving antenna
2. increase the separation between the equipment and the receiver
3. connect the equipment to an outlet on a circuit different from that to which the
receiver is connected
4. consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Where shielded interface cables have
been provided with the product or specified additional components or accessories elsewhere
defined to be used with the installation of the product, they must be used in order to ensure
compliance with FCC regulations.
In order to insure compliance with the referenced FCC regulations, only
deploy the equipment with provided or approved accessories in the
manner indicated in this and other pertinent manuals.
Use only approved and properly shielded cables of good quality.
Address any inquiries to:
ZeeVee, Inc.
295 Foster Street, Suite 200
Littleton, MA 01462
User Manual
Page 27 of 29
ZyPerUHD
EMC Information
The ZyPerUHD devices should be mounted and operated in accordance with the guidelines
specified in this guide to maintain the integrity of the expected EMC characteristics.
The supplied Power Supply (AC/DC Conversion unit) should be used. Any other AC/DC supply
has not been tested or verified to perform at the levels indicated in this manual.
Media cables are not provided and the ZyPerUHD devices are generally fairly tolerant of
different types and manufacture styles.
• Media cables should be of good quality and rated for the performance levels of the
interface to which they are connected.
‣ e.g. 4K HDMI ports should only be connected to HDMI cables rated for 4K
operation at the desired resolutions.
HDMI
cables shall be of the type incorporating
•
integral Ferrite cores in order to achieve rated
compliance levels and the cleanest electromagnetic
environment in the vicinity of the unit.
Electromagnetic Emissions
Test
Compliance
Level
RF emissions: CISPR 11
Group 1
RF emissions: CISPR 11
Class A
Harmonic emissions: IEC 61000-3-2
Voltage fluctuations/ flicker emissions:
IEC 61000-3-3
User Manual
Class D
Notes
ZyPerUHD emissions are very low and not
expected to cause unintentional interference.
Commercial equipment for use in commercial
environments.
Suitable for use in all commercial and domestic
low-voltage environments.
Compliant
Page 28 of 29
ZyPerUHD
Disclaimers
ZeeVee has striven to insure that this document is accurate and represents the described
products fully. Although, ZeeVee assumes no responsibility for errors found, should any be
found, please contact support@zeevee.com and corrections will be issued as appropriate.
ZeeVee hardware designs are property of ZeeVee.
Components, sub-assemblies, and methods utilized in the designs are free of any
encumbrances or appropriate licenses and rights have been obtained by ZeeVee for the use in
the described products in the intended manner.
ZeeVee software is the sole property of ZeeVee except within the restrictions and guidelines of
any open-source or public-license component utilized. ZeeVee represents that normal usage of
the product in a typical customer installation is fully within the granted rights and privileges of
any licensed component. Visit www.zeevee.com for further details.
The specifications of the described products may change at any time without notice.
ZeeVee forbids unauthorized disassembly, reverse-engineering, duplication, or any other
attempt to recreate all or portions of the hardware or software outside of any use explicitly
authorized in writing by ZeeVee.
Trademarks
All trademarks are the property of their respective owners.
Copyright
This document is copyrighted with all rights reserved. This document or any portion contained
may not be reproduced or copied by any means - graphically, mechanically, or electronically without express written authorization of ZeeVee.
© 2017 ZeeVee, Inc. All rights reserved.
User Manual
Page 29 of 29
Download PDF
Similar pages