HP 4510G Switch Series - BM Eletro Conectividade

QuickSpecs
HP 4510G Switch Series
Overview
Models
HP 4510-48G Switch
HP 4510-24G Switch
JF428A
JF847A
Key features
Enterprise-class security features
Wire-speed switching capacity up to 176 Gbps
Dual-personality copper/fiber ports
Single IP address management
IEEE 802.1X network access control
Product overview
The HP 4510G Switch Series provides advanced Gigabit Ethernet access and distribution for medium-sized businesses
and smaller enterprise organizations seeking to build a secure converged network. HP 4510G switches support security,
and management features, and accommodate up to four optional 10 GbE high-speed links, enabling connectivity to a
core network or high-performance servers. The combination of high-performance Gigabit Ethernet switching, quality of
service (QoS), and traffic management features help ensure that essential applications receive appropriate priority for
efficient utilization of network resources. The series also offers single address management.
Features and benefits
Quality of Service (QoS)
Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight
queues
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3
protocol, TCP/UDP port number, source port, and DiffServ
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue guaranteed minimums
Bandwidth shaping:
Rate limiting: provides per-port, ingress-based enforced bandwidth maximums
Guaranteed minimums: provides per-port, per-queue egress-based guaranteed bandwidth minimums
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Management
Remote configuration and management: is available through a secure Web browser or a command-line interface
(CLI)
Manager and operator privilege levels: enable read-only (operator) and read-write (manager) access on CLI and
Web browser management interfaces
Management VLAN: segments traffic to and from management interfaces, including CLI/telnet, a Web browser
interface, and SNMP
RADIUS accounting support: separates RADIUS accounting server support per SSID; provides detailed session,
usage, and billing information for each client activity
Multiple configuration files: can be stored to the flash image
Dual flash images: provide independent primary and secondary operating system files for backup while upgrading
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
Command-line interface (CLI): provides a secure, easy-to-use command-line interface for configuring the module
via SSH or a switch console; provides direct real-time session visibility
SNMPv1, v2c, and v3: facilitate centralized discovery, monitoring, and secure management of networking devices
Port mirroring: enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
3Com-heritage Comware Operating System: CLI and Web user interface in common with HP E4xxx and E55xxx
series switches
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 1
QuickSpecs
HP 4510G Switch Series
Overview
Connectivity
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Dual-personality functionality: includes four 10/100/1000 ports or SFP slots for optional fiber connectivity such as
Gigabit-SX, -LX, and -LH, or 100-FX
IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoEpowered devices such as IP phones, wireless access points, and security cameras
Optional 10 Gigabit Ethernet ports: allow the addition of 10 Gigabit Ethernet connections for uplinks or highbandwidth server connections; flexibly supports XFP, SFP+, or CX4 local connections
Manageability
RMON (remote monitoring): provides advanced monitoring and reporting capabilities for statistics, history, alarms,
and events
Dual flash images: provides independent primary and secondary operating system files for backup while
upgrading
Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI)
Web interface: allows configuration of the switch from any Web browser on the network
Multiple configuration files: allow multiple configuration files to be stored to a flash image
Software updates: free downloads from the Web
sFlow (RFC 3176): wire-speed traffic accounting and monitoring
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol provides easy
mapping using network management applications
Layer 2 switching
VLAN support and tagging: support IEEE 802.1Q with 4,094 simultaneous VLAN IDs
GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs
IP multicast snooping and data-driven IGMP: automatically prevents flooding of IP multicast traffic
Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers
IEEE 802.1ad QinQ: increases the scalability of an Ethernet network by providing a hierarchical structure;
connects multiple LANs on a high-speed campus or metro network
Layer 3 routing
Static IP routing: provides manually configured routing; includes ECMP capability
Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing
Security
Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and
source/destination TCP/UDP port number
RADIUS/TACACS+: eases switch management security administration by using a password authentication server
Secure Shell: encrypts all transmitted data for secure remote CLI access over IP networks
Secure Web management with HTTPS and SSL: encrypts all HTTP traffic, allowing secure access to the
browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins: control port-based access for authentication and accountability
Port security: allows access only to specified MAC addresses, which can be learned or specified by the
administrator
MAC address lockout: prevents particular configured MAC addresses from connecting to the network
Secure FTP: allows secure file transfer to and from the switch; protects against unwanted file downloads or
unauthorized copying of a switch configuration file
Switch management logon security: can require either RADIUS or TACACS+ authentication for secure switch
CLI logon
Secure management access: securely encrypts all access methods (CLI, GUI, or MIB) through SSHv2, SSL,
and/or SNMPv3
Custom banner: displays security policy when users log in to the switch
Automatic VLAN assignment: automatically assigns users to the appropriate VLAN based on their identity and
location and the time of day
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 2
QuickSpecs
HP 4510G Switch Series
Overview
Management password: provides security so that only authorized access to the Web browser interface is allowed
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs,
preventing forged BPDU attacks
Dynamic IP lockdown: works with DHCP protection to block traffic from unauthorized hosts, preventing IP source
address spoofing
DHCP protection: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of
network data
STP Root Guard: protects the root bridge from malicious attacks or configuration mistakes
Convergence
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): is an automated device discovery protocol that provides
easy mapping of network management applications
Automated voice VLAN assignment: recognizes IP phones and automatically assigns voice traffic to a dedicated
VLAN for IP phones
Warranty and support
Lifetime warranty: for as long as you own the product with advance replacement and next-business-day delivery
(available in most countries)*
Electronic and telephone support: limited electronic and telephone support is available from HP; refer to:
www.hp.com/networking/warranty for details on the support provided and the period during which support is
available
Software releases: refer to: www.hp.com/networking/warranty for details on the software releases provided and
the period during which software releases are available for your product(s)
* Hardware warranties replacement for as long as you own the product, with next business day advance replacement
(available in most countries). The disk drive included with HP Alliance One Advanced Services and Services zl Modules,
HP Threat Management Services zl Module, HP AllianceOne Ext zl Mod w/Rvrbd Stlhd, HP E-MSM765zl Mobility
Controller and HP Surv Brch Com zl Mod pwrby Msft Lync has a five-year hardware warranty. For details, refer to the
Software license and hardware warranty statements at: www.hp.com/networking/warranty.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 3
QuickSpecs
HP 4510G Switch Series
Technical Specifications
HP 4510-48G Switch (JF428A)
Ports
2 open module slots
44 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Physical
Dimensions
16.54(d) x 17.32(w) x 1.72(h) in. (42.0 x 44.0 x 4.37 cm) (1U height)
characteristics
Weight
11.02 lb. (5 kg)
Memory and processor Processor
Power PC @ 200 MHz, 16 MB flash, 128 MB SDRAM; packet buffer
size: 4 MB shared packet buffer
Performance
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
< 2.6 µs
Throughput
131 million pps
Switching capacity
176 Gbps
MAC address table size 16000 entries
Reliability
MTBF (years)
14.9
Environment
Electrical
characteristics
Safety
Emissions
Management
Services
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Voltage
100-240 VAC
Maximum power rating120 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
IEC 60950-1; EN 60950; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55022; EN
55024; ICES-003 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN
61000-4-4; EN 61000-4-5; EN 61000-4-6
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band
management (serial RS-232C); SNMP Manager; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (UV834E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV837E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (UV840E)
3-year, 24x7 SW phone support, software updates (UV843E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR668E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR669E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR670E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV835E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV838E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV841E)
4-year, 24x7 SW phone support, software updates (UV844E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV836E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV839E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV842E)
5-year, 24x7 SW phone support, software updates (UV845E)
3 Yr 6 hr Call-to-Repair Onsite (UW434E)
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 4
QuickSpecs
HP 4510G Switch Series
Technical Specifications
4 Yr 6 hr Call-to-Repair Onsite (UW435E)
5 Yr 6 hr Call-to-Repair Onsite (UW436E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR672E)
1-year, 24x7 software phone support, software updates (HR671E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS714E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS715E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS716E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS717E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS718E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS719E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS720E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS721E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
HP 4510-24G Switch (JF847A)
Ports
2 open module slots
20 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
4 SFP auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Physical
Dimensions
11.81(d) x 17.32(w) x 1.72(h) in. (30.0 x 44.0 x 4.37 cm) (1U height)
characteristics
Weight
9.92 lb. (4.5 kg)
Memory and processor Processor
Power PC @ 200 MHz, 16 MB flash, 128 MB SDRAM; packet buffer
size: 2 MB shared packet buffer
Performance
1000 Mb Latency
< 3.2 µs
10 Gbps Latency
< 2.6 µs
Throughput
93.2 million pps
Switching capacity
128 Gbps
MAC address table size 16000 entries
Reliability
MTBF (years)
23
Environment
Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
10% to 90%, noncondensing
humidity
Nonoperating/Storage -40°F to 158°F (-40°C to 70°C)
temperature
Nonoperating/Storage 5% to 95%, noncondensing
relative humidity
Electrical
Voltage
100-240 VAC
characteristics
Maximum power rating80 W
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Safety
IEC 60950-1; EN 60950; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 5
QuickSpecs
HP 4510G Switch Series
Technical Specifications
Emissions
Management
Services
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55022; EN
55024; ICES-003 Class A; EN 61000-3-2; EN 61000-3-3; EN 61000-4-2; EN 61000-4-3; EN
61000-4-4; EN 61000-4-5; EN 61000-4-6
IMC - Intelligent Management Center; command-line interface; Web browser; out-of-band
management (serial RS-232C); SNMP Manager; Telnet
3-year, 4-hour onsite, 13x5 coverage for hardware (UX198E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UX201E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates
(UX204E)
3-year, 24x7 SW phone support, software updates (UX207E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR663E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR664E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UX199E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UX202E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UX205E)
4-year, 24x7 SW phone support, software updates (UX208E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UX200E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UX203E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UX206E)
5-year, 24x7 SW phone support, software updates (UX209E)
3 Yr 6 hr Call-to-Repair Onsite (UX210E)
4 Yr 6 hr Call-to-Repair Onsite (UX211E)
5 Yr 6 hr Call-to-Repair Onsite (UX212E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR667E)
1-year, 24x7 software phone support, software updates (HR666E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software
updates (HR665E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS730E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS731E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS732E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS733E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS734E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS735E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS735E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS737E)
Refer to the HP website at: www.hp.com/networking/services for details on the service-level
descriptions and product numbers. For details about services and response times in your area,
please contact your local HP sales office.
Standards and
protocols
(applies to all products in
series)
General protocols
IEEE 802.1ag Service Layer OAM
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q (GVRP)
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1v VLAN classification by Protocol
and
Port
IEEE 802.1w Rapid Reconfiguration of Spanning
Tree
IEEE 802.1X PAE
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3x Flow Control
MIBs
IEEE 8021-PAE-MIB
IEEE 8023-LAG-MIB
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1724 RIPv2 MIB
RFC 2011 SNMPv2 MIB for IP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 6
QuickSpecs
HP 4510G Switch Series
Technical Specifications
RFC 768 UDP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 Clarifications and Extensions for the
Bootstrap Protocol
RFC 2131 DHCP
RFC 2453 RIPv2
RFC 3046 DHCP Relay Agent Information
Option
RFC 3576 Ext to RADIUS (CoA only)
RFC 4675 RADIUS VLAN & Priority
IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2710 Multicast Listener Discovery (MLD)
for
IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2925 Definitions of Managed Objects for
Remote Ping, Traceroute, and Lookup
Operations
(Ping only)
RFC 3019 MLDv1 MIB
RFC 3162 RADIUS and IPv6
RFC 3315 DHCPv6 (client and relay)
RFC 3513 IPv6 Addressing Architecture
RFC 3810 MLDv2 (host joins only)
RFC 4022 MIB for TCP
RFC 4251 SSHv6 Architecture
RFC 4252 SSHv6 Authentication
RFC 4253 SSHv6 Transport Layer
RFC 4254 SSHv6 Connection
RFC 4293 MIB for IP
RFC 4419 Key Exchange for SSH
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch
RFC 4861 IPv6 Neighbor Discovery
RFC 4862 IPv6 Stateless Address Autoconfiguration
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2665 Ethernet-Like-MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3
RFC 3826 AES for SNMP's USM MIB
RFC 4133 Entity MIB (Version 3)
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol
(LLDP)
RFC 2819 Four groups of RMON: 1 (statistics),
2
(history), 3 (alarm) and 9 (events)
RFC 3176 sFlow
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3
Security
IEEE 802.1X Port Based Network Access
Control
RFC 1492 TACACS+
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
Secure Sockets Layer (SSL)
SSHv2 Secure Shell
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 7
QuickSpecs
HP 4510G Switch Series
Accessories
HP 4510G Switch
Series accessories
Modules
HP 4500/4800 1-port 10GbE XFP Module
HP 4500/4800 2-port 10GbE XFP Module
HP 5500/5120 2-port 10GbE SFP+ Module
HP 4500/4800 2-port 10GbE LCM Module
HP 5500 2-port 10GbE Local Connect Module
Transceivers
HP X110 100M SFP LC FX Dual Mode Transceiver
HP X110 100M SFP LC LX Dual Mode Transceiver
HP X125 1G SFP RJ45 T Transceiver
HP X124 1G SFP LC SX Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X130 SC LR XFP Transceiver
HP X130 LC SR XFP Transceiver
HP X135 LC ER XFP Transceiver
HP X130 CX4 XFP Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable
HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable
HP X240 SFP+ SFP+ 3 m Direct Attach Cable
Cables
HP 50 cm CX4 Cable
HP 100 cm CX4 Cable
HP 300 cm CX4 Cable
HP 0.5 m Multimode OM3 LC/LC Optical Cable
HP 1 m Multimode OM3 LC/LC Optical Cable
HP 2 m Multimode OM3 LC/LC Optical Cable
HP 5 m Multimode OM3 LC/LC Optical Cable
HP 15 m Multimode OM3 LC/LC Optical Cable
HP 30 m Multimode OM3 LC/LC Optical Cable
HP 50 m Multimode OM3 LC/LC Optical Cable
HP X230 Local Connect 50cm CX4 Cable
HP X230 Local Connect 100cm CX4 Cable
HP X230 CX4 to CX4 3m Cable
HP 4510-48G Switch (JF428A)
NEW HP 1 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 2 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 5 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 15 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 30 m PremierFlex OM3+ LC/LC Optical Cable
NEW HP 50 m PremierFlex OM3+ LC/LC Optical Cable
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
JE053A
JE049A
JD368B
JE051A
JD360B
JD497A
JD498A
JD089B
JD493A
JD063B
JD108B
JD117B
JD121A
JD506A
JD092B
JD093B
JD094B
JD095B
JD096B
JD097B
JE054A
JE055A
JE056A
AJ833A
AJ834A
AJ835A
AJ836A
AJ837A
AJ838A
AJ839A
JD363B
JD364B
JD365A
BK838A
BK839A
BK840A
BK841A
BK842A
BK843A
Page 8
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP 4500/4800 1-port
10GbE XFP Module
(JE053A)
Ports
Services
1 XFP 10-GbE port; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP 4500/4800 2-port
10GbE XFP Module
(JE049A)
Ports
Services
2 XFP 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP 4500/4800 2-port
10GbE LCM Module
(JE051A)
Ports
Services
2 CX4 10-GbE ports; Duplex: full only
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
HP X110 100M SFP LC Ports
FX Dual Mode
Connectivity
Transceiver(JD497A)
A small form-factor
pluggable (SFP) 100
MB/s Dual mode
transceiver that provides
a full duplex 100Mb/s
solution up to 2km on a
multi mode fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
1 LC 100 Mbps port
Connector type
Wavelength
Dimensions
LC
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
0.04 lb. (0.02 kg)
Full configuration
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable length
2km
Fiber type
Multi Mode
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 9
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP X110 100M SFP LC Ports
LX10
Connectivity
Transceiver(JD498A)
A small form-factor
pluggable (SFP)
100Mb/s transceiver that
provides a full duplex
100Mb/s solution for up
to 10km on a single
mode cable.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X125 1G SFP RJ45 Ports
T Transceiver (JD089B) Connectivity
Physical
A small form factor
pluggable (SFP) Gigabit characteristics
1000Base-T transceiver
that provides a full
duplex Gigabit solution Electrical
up to 100m on a Cat-5+ characteristics
cable.
Cabling
Services
1 LC 100 Mbps port
Connector type
Wavelength
Dimensions
LC
1310 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
0.04 lb. (0.02 kg)
Full configuration
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable length
10km
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connector type
RJ-45
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x
1.4 cm)
Full configuration
0.07 lb. (0.03 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù
differential 4-pair unshielded twisted pair (UTP) or shielded twisted pair
(STP) balanced, complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:
• 100m
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 10
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP X124 1G SFP LC SX Ports
Transceiver (JD493A) Connectivity
JD493A HP X124 1G
SFP LC SX Transceiver
that
provides a full duplex
Gigabit solution up to
550m on Multi Mode
fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X125 1G SFP LC
LH70 Transceiver
(JD063B)
Ports
Connectivity
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Physical
characteristics
Electrical
characteristics
Cabling
Services
HP X130 10G XFP CX4 Ports
Transceiver (JD506A) Connectivity
An XFP 10 Gigabit CX4 Cabling
transceiver that provides Services
full duplex 10G solution
using CX4 cabling.
1 LC 1000BASE-SX port
Connector type
LC
Wavelength
850 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Maximum distance:
• 220m-550m
Fiber type
Multi Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration
0.04 lb. (0.02 kg)
weight
Power consumption
0.8 W
typical
Power consumption
1.0 W
maximum
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
1 CX4 10-GbE port; Duplex: full only
Connector type
CX4
Cable length
15m Max CX4 cables
Refer to the HP website at: www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details
about services and response times in your area, please contact your
local HP sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 11
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 0.5 m Multimode
OM3 LC/LC Optical
Cable (AJ833A)
Cabling
Notes
Services
HP 1 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ834A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 12
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
Services
HP 2 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ835A)
Notes
Services
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 13
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 5 m Multimode OM3 Cabling
LC/LC Optical Cable
(AJ836A)
Notes
Services
HP 15 m Multimode
OM3 LC/LC Optical
Cable (AJ837A)
Cabling
Notes
Cable type:
50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for
distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: This specification defines the detail requirements for a
tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic
cable and Ethernet assembly with LC duplex connectors on one end
and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 14
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
Services
HP 30 m Multimode
OM3 LC/LC Optical
Cable (AJ838A)
Cabling
Notes
Services
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 15
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 50 m Multimode
OM3 LC/LC Optical
Cable (AJ839A)
Cabling
Notes
Services
HP 1 m PremierFlex
OM3+ LC/LC Optical
Cable (BK838A)
Notes
Cable type:
50/125 µm (core/cladding) diameter, mulitimode fiber optic, with
effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC
for distances of up to 300 m;
Maximum distance:
10Gbps Transfer Rate (Ethernet): 300m
Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125
um fiber optic cable and Ethernet assembly with LC duplex connectors
on one end and LC duplex connectors on other end.
Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±
2.0um Coating diameter: 245 ± 10um
Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km
@850/1300nm.
Optical Glass: For Laser sources: 2000/500 MHz-km
@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.
CABLE: The cable is duplex zipcord graded index 50/125um
multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.
BULK CABLE & CABLE ASSEMBLY CONFIGURATION:
Jacket Material: Riser Grade - Low Smoke Zero Halogen
thermoplastic.
Jacket Color: Aqua for OM3 multimode per TIA 598
Boot Color: White
Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003
dB/M added for lengths > 30 meters.
Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @
1310 nm @ 23°C as tested in accordance with EIA 455-46.
Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 16
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 2 m PremierFlex
OM3+ LC/LC Optical
Cable (BK839A)
Services
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
Services
HP 5 m PremierFlex
OM3+ LC/LC Optical
Cable (BK840A)
Notes
Services
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 17
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 15 m PremierFlex
OM3+ LC/LC Optical
Cable (BK841A)
Notes
Services
HP 30 m PremierFlex
OM3+ LC/LC Optical
Cable (BK842A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 18
QuickSpecs
HP 4510G Switch Series
Accessory Product Details
HP 50 m PremierFlex
OM3+ LC/LC Optical
Cable (BK843A)
Notes
Services
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex
connectors on each end.
• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating
diameter: 245 ± 10um
• Bandwidth: 3000 MHz-km @ 850nm (Laser)
• Jacket Color: Blue
• Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH)
thermoplastic
• Boot Color: White
• Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable,
50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also
has a longitudinal white stripe that runs the entire length of the cable.
• Insertion Loss: Less than 0.5dB @ 850nm with LED source,
0.003dB/m added for lengths >30m
• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @
1310nm @ 23°C as tested in accordance with EIA 455-45
Refer to the HP website at www.hp.com/networking/services for details
on the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP
sales office.
To learn more, visit: www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13796 Worldwide QuickSpecs — Version 4 — 10/27/2011
Page 19
Download PDF
Similar pages