Business Class 802.11g Outdoor Client Bridge/AP EOC

Business Class 802.11g Outdoor Client Bridge/AP
EOC-2610
EOC-2610 is a Long Range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum
and provides high bandwidth up to 108Mbps with SuperG. EOC-2610 features high transmit output power and high receive sensitivity.
High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points and to deliver a
more stable wireless connection. It also reduces deployment expenses on the equipments.
EOC-2610 supports distance control by 1km to 30km and RSSI indicator, which enable the best transmit and receive signals for
superior wireless performance. This outdoor device comes with a PoE injector (24V) for easy outdoor deployment.
To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit WEP data encryption and also
supports WPA/WPA2. The MAC address filtering lets you select exactly which stations should have access to your network. In addition,
the User Isolation function can protect the private network between client users.
EOC-2610 is a feature-rich and all-in-one outdoor device, it is the perfect solution for any outdoor application you may have.
Features
Benefits
Band 2.4GHz
It works in 2.4GHz frequency spectrum.
High output power
Transmit output power programmable for different country selections.
High Data Rate
High speed transmitting rate up to 108Mbps with Super Mode, supports large payload such as MEPG video
streaming.
Multifunction
application
Access Point/Client Bridge/Client Router.
Long
transmitting
range Transmit power control and distance control (ACK timeout).
Signal Strength
LED indicators have the best transmit and receive signal for traffic communication
Antenna Diversity
Two internal panel antennas and also could switch to external antenna for applications
Public
solution
QoS(WMM)
wireless An AP interface that is especially useful in public areas such as hotspots and enterprise.
Enhance performance and density (Phase2).
Antenna
EnGenius Data Communication Australia
Check www.engeniustech.com.au for more information
Tel: 1300 725 323
Check www.engeniustech.com.au for more information
Tel: 1300 725 323
Hardware Specification
Physical Interface
One 10/100 Fast Ethernet RJ-45
One Reset Button
One SMA Connector
One switch (external and internal antenna switching)
LED indicators
Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
Green: Good Quality / Yellow: Marginally Acceptable
Quality / Red: Bad Quality
Power Requirements
Active Ethernet (Power over Ethernet) Proprietary PoE
design
Power Adapter 24V / 0.8A DC
Regulation Certifications
FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17
RF Specification
Frequency Band:802.11b/g: 2.412~2.472GHz
Modulation Technology
OFDM = BPSK, QPSK, 16-QAM,
64-QAM
DSSS = DBPSK, DQPSK, CCK
Operating Channels
802.11b/g11 for North America
Receive Sensitivity (Typical)
802.11b: -97 dBm @ 1Mbps, -89 dBm @ 11Mbp
802.11g: -92 dBm @ 6Mbps,-74 dBm @ 54Mbps
Available transmit power (Average power)
FCC 2.412~2.462 GHz IEEE 802.11b
27dBm@1~11Mbps
ETSI 2.412~2.472 GHz IEEE 802.11b
27dBm@1~11Mbps
FCC 2.412~2.462 GHz IEEE 802.11g
26dBm@6~24Mbps, 25dBm@36Mbps, 23dBm@48Mbps,
22dBm@54Mbps
ETSI 2.412~2.472 GHz IEEE 802.11g
26dBm@6~24Mbps, 25dBm@36Mbps, 23dBm@48Mbps,
22dBm@54Mbps
Tolerance:±1 dBm
Internal Antenna: Embedded 10dBi Panel antenna
External Antenna: One SMA connector
Package Content
One 802.11b/g Long range AP/CB (EOC-2610)
One PoE injector (EPE-1212)
One Power Adaptor
One CD with User's Manual
One QIG
One Metal strap
One Special screw set
Software Feature
Protocol / Standard
IEEE 802.3 (Ethernet), IEEE 802.3u (Fast Ethernet), IEEE
802.11b/g (2.4GHz WLAN)
Operation Mode: 802.11 b/g Access Point/Client
Bridge/Client Router, Super Mode : 108 Mbps
LAN: DHCP Server/Client
Wireless
Channel Selection (Setting varies by countries)
Transmission Rate 11 b/g 54, 48, 36, 24, 18, 12, 11, 9, 6,
5.5, 2, 1 Mbps
Long distance transmission : 1km to 30km
Signal Strength indication using LEDs
PPPoE ( CR mode )
Security
WEP Encryption-64/128/152 bit
WPA/WPA2 Enterprise Personal (WPA/WPA2-PSK/EAP
using TKIP or AES)
802.1x Authenticator
Hide SSID in beacons
802.1Q VLAN and VPN Pass through
MAC address filtering, up to 50 field
L2 isolation(AP mode)
Wireless STA (Client) connected list
Web-redirect
QoS: WMM (Phase2)
:
Management
Configuration:Web-based configuration (HTTP)
Firmware Upgrade: Upgrade firmware via web browser and
keep latest setting when f/w update
Administrator password change
Reset Setting: Reboot (Press 1 second) / Reset to Factory
Default (Press 5 seconds)
System monitoring: Status, Event Log
SNMP: V1, V2c
MIB I, MIB II (RFC1213) and Private MIB (Phase2)
Backup & Restore: Settings through Web
Time setting: NTP (Auto-setting of time) / Time setting
manually
Environment & Physical
Temperature Range
Operating: -20°C~70°C(-4°F to 158°F)
Storage -30°C ~ 80°C(-22°F to 176°F)
Humidity (non-condensing): 5% 90% typical
Dimensions: 10.24 (260mm) x Width: 3.31
Hieght: 2.17 (55mm)
Weight: 300g
」
」
~
」 (84mm) x
Contact
service@engeniustech.com.au
1300 725 323
1/14 Wellington Street, ACACIA RIDGE QLD 4110 Australia
Check www.engeniustech.com.au for your contact information
Download PDF
Similar pages