BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
SFP 155M 1310nm Single mode Optical Transceiver
Features
Description
The BlueOptics© BO05A13620 SFP transceiver is a
high performance, cost effective module supporting a
data rate up to 155Mbps with 20 Kilometer link
length on single mode fiber.
BlueOptics© transceivers are 100% compliant with
SFP Multi-Source Agreement (MSA).
All BlueOptics© SFP transceivers can be equipped
with digital diagnostic function compliant to MSA SFF8472.
Using digital diagnostic, BlueOptics© SFP transceivers
provide the following real time information:
-
Supply voltage
Laser bias current
Laser average output power
Laser received input power
Temperature
The transceiver consists of five sections: A FP
transmitter, a PIN photodiode, a trans-impedance
preamplifier (TIA), the LD Driver and the digital
diagnostic function.
Applications

Fast Ethernet

SDH / SONET

Router/Server Interface

Other optical links
-1-

155Mb/s serial optical interface

FP laser transmitter

PIN photo-detector

Hot-pluggable SFP footprint compliant to
SFF-8074i

Duplex LC/UPC
interface

2-wire interface for management

Metal enclosure, for lower EMI

RoHS compliant and lead-free

Single +3.3V power supply

Compliant with SFF-8472

Case operating temperature
-
type
pluggable
Commercial: 0°C to +70°C
Extended: -10°C to +80°C
Industrial: -40°C to +85°C
optical
BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
Warnings
Order Information
Handling Precautions: This device is susceptible to
damage as a result of electrostatic discharge (ESD). A
static free environment is highly recommended.
Part No.
BO05A13620
Laser Safety: Even small radiation emitted by laser
devices can be dangerous to human eyes and lead to
permanent eye injuries. Be sure to avoid eye contact
with direct or indirect radiation.
Temp.
DDM
0°C to +70°C
-
BO05A13620EX
-10°C to +80°C
-
BO05A13620IN
-40°C to +80°C
-
BO05A13620D
0°C to +70°C
BO05A13620DEX
-10°C to +80°C
BO05A13620DIN
-40°C to +80°C
Regulatory Compliance
Warranty
Every BlueOptics© transceiver comes with a 5 year
replacement warranty and lifetime support.
For a warranty inquiry, please contact your CBO sales
representative.
This warranty only covers the first user of the
equipment.
Feature
Electrostatic
Standard
Discharge (ESD)
Electromagnetic
- FCC Part 15 Class B EN 55022
Interference (EMI)
- Class B (CISPR 22A)
Laser Eye Safety
- FDA 21CFR 1040.10, 1040.11
- IEC/EN 60825-1, 2
Important Notice
Component
Recognition
- IEC/EN 60950, UL
Performance figures, data and any illustrative
material provided in this data sheet are typical and
must be specifically confirmed in writing by CBO
before they become applicable to any particular order
or contract. In accordance with the CBO policy of
continuous improvement specifications may change
without notice.
RoHS
- 2002/95/EC
EMC
- EN61000-3
The publication of information in this data sheet does
not imply freedom from patent or other protective
rights of CBO or others.
Further details are available from any CBO sales
representative.
Installation
Before installation attach an ESD-preventive wrist to
ensure not to damage the transceiver or hardware.
BlueOptics© BO05A13620 can be installed in any
Small Form Factor Pluggable (SFP) port. You can install
the BO05A13620 regardless if the system is powered
on or off, because it is hot-swappable.
Insert the transceiver into the SFP port and remove the
dust cap.
You can now connect your cable.
-2-
Co.
- IEC/EN 61000-4- 2
Class 1
BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
1. Absolute Maximum Ratings
Parameter
Storage Temperature
Storage Ambient Humidity
Symbol
Ts
HA
Min.
-40
5
Typ.
Max.
85
95
Unit
ºC
%
2. Recommended Operating Conditions
Parameter
Symbol
Case Operating Temperature
Min.
0
Tcase
Ambient Humidity
Data Rate
Transmission Distance
Coupled Fiber
HA
Typ.
Max.
70
Unit
-10
80
ºC
-40
85
Note
BO05A13620
BO05A13620D
BO05A13620EX
BO05A13620DEX
BO05A13620IN
BO05A13620DIN
5
70
%
Mbps
KM
TX Rate/RX Rate
155/155
20
Single mode fiber
9/125µm MMF
3. Electrical Interface Characteristics
Parameter
Transmitter
Total Supply Current
Transmitter Disable Input-High
Transmitter Disable Input-Low
Transmitter Fault Input-High
Transmitter Fault Input-Low
Receiver
Total Supply Current
LOSS Output Voltage-High
LOSS Output Voltage-Low
Symbol
Min.
ICC
VDISH
VDISL
VTxFH
VTxFL
2
0
2
0
ICC
VLOSH
VLOSL
Typ.
2
0
Max.
Unit
Note
A
Vcc+0.3
0.8
Vcc+0.3
0.8
mA
V
V
V
V
1
B
mA
V
V
1
Vcc+0.3
0.8
Notes:
1. A (TX) + B (RX) = 280mA (without termination circuit)
4. Transmitter Specifications - Optical
Parameter
Average Output Power
Extinction Ratio
Center Wavelength
Spectrum Bandwidth(RMS)
Transmitter OFF Output Power
Differential Line Input Impedance
Jitter P-P
Output Eye Mask
Symbol
POUT
ER
λC
σ
POff
RIN
tJ
Min.
-15
8.2
1270
Typ.
Max.
-8
1310
90
100
1360
3.5
-45
110
0.1
Unit
dBm
dB
nm
nm
dBm
Ohm
UI
Compliant with G.957(class 1 laser safety)
-3-
Note
FP Laser
BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
5. Receiver Specifications - Optical
Parameter
Input Optical Wavelength
Receiver Sensitivity
Input Saturation Power (Overload)
LOS Assert
LOS De-assert
LOS Hysteresis
1.
Symbol
λIN
PIN
PSAT
PA
PD
PA-PD
Min.
1270
Typ.
Max.
1610
-29
-8
-38
0.5
2.0
-30
6.0
Unit
nm
dBM
dBm
dBm
dBm
dB
Note
1
Notes:
-12
7
Measured with Light source 1310nm, ER=9dB; BER =<10 @PRBS=2 -1 non-return-to-zero.
6. SFP to Host Connector Pin Out
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
1.
2.
3.
Symbol
VEET
TFAULT
TDIS
MOD_DEF(2)
MOD_DEF(1)
MOD_DEF(0)
RS0
LOS
VEER
VEER
VEER
RDRD+
VEER
VCCR
VCCT
VEET
TD+
TDVEET
Name / Description
Transmitter Ground (Common with Receiver Ground)
Transmitter Fault indication
Transmitter Disable
Module Definition 2. Data line for Serial ID.
Module Definition 1. Data line for Serial ID.
Module Definition 0. Data line for Serial ID.
Rate Select 0
Loss of Signal indication
Receiver Ground (Common with Transmitter Ground)
Receiver Ground (Common with Transmitter Ground)
Receiver Ground (Common with Transmitter Ground)
Inv. Received Data Out
Received Data Out
Receiver Ground (Common with Transmitter Ground)
Receiver Power Supply
Transmitter Power
Transmitter Ground (Common with Receiver Ground)
Transmit Data In
Inv. Transmit Data In
Transmitter Ground (Common with Receiver Ground)
Notes:
Circuit ground is internally isolated from chassis ground.
TDis is an input that is used to shut down the transmitter optical output. It is pulled up within the
module with a 4.7k~10kΩ resistor. Its states are:
Low (0 to 0.8V): Transmitter on
(>0.8V, < 2.0V): Undefined
High (2.0 to 3.465V): Transmitter Disabled
Open: Transmitter Disabled
Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7k~10kΩ
resistor on the host board. The pull-up voltage shall be VccT or VccR.
Mod-Def 0 is grounded by the module to indicate that the module is present
Mod-Def 1 is the clock line of two wire serial interface for serial ID
Mod-Def 2 is the data line of two wire serial interface for serial ID
-4-
Note
1
2
3
3
3
4
1
1
1
1
1
1
BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
4.
LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor. Pull up voltage
between 2.0V and Vcc+0.3V. Logic 1 indicates loss of signal; Logic 0 indicates normal operation. In the
low state, the output will be pulled to
less than 0.8V.
Pinout of Connector Block on Host Board
7. EEPROM Information
The SFP MSA defines a 256-byte memory map in EEPROM describing the transceivers capabilities, standard
interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit
address 1010000X (A0h).
Data
Address
0
1
2
3-10
11
12
13
14
15
16
17
18
29
Field Size
(Bytes)
1
1
1
8
1
1
1
1
1
1
1
1
Name of Field
Contents (Hex)
Description
Identifier
Ext. Identifier
Connector
Transceiver
Encoding
BR, Nominal
Reserved
Length (9μm) km
Length (9μm) 100m
Length (50μm) 10m
Length(62.5μm)10m
Length (Copper)
Formfactor
1
16
Reserved
1
3
16
Reserved
Vendor OUI
56-59
60-61
4
2
Vendor rev
Wavelength
XX
XX
XX
XX XX XX XX XX XX XX XX
XX
XX
00
XX
XX
XX
XX
XX
00
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
00
XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX
XX XX
62
1
Reserved
00
30-35
36
37-39
40-55
Vendor name
Vendor PN
-5-
Transmittter Code
Transceiver Speed
Max. link length in KM
Max. link length in M
Max. link length in M
Max. link length in M
Max. link length in M
Vendor name - OEM
Product Number depending on Part
Vendor revision
Transceiver
Wavelength
BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
63
1
64-65
66
67
68-83
2
1
1
16
Options
BR, max
BR, min
84-91
92
93
94
95
8
1
1
1
1
Vendor date code
Diagnostic type
Enhanced option
SFF-8472
96-255
160
XX
CC BASE
XX XX
XX
XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX XX XX
XX XX XX XX XX XX 20 20
XX
XX
XX
XX
Vendor SN
CC_EXT
Checksum of bytes 062
Part serial number
Year, Month, Day
Diagnostics
Diagnostics
Diagnostics
Checksum of bytes 6494
Vendor Specific
8. Digital Diagnostics / Digital Optical Monitoring
The transceiver provides serial ID memory contents and diagnostic information about the present
operating conditions by the 2-wire serial interface (SCL, SDA).
The diagnostic information with internal calibration or external calibration are all implemented,
including received power monitoring, transmitted power monitoring, bias current monitoring, supply
voltage monitoring and temperature monitoring.
9. Recommended Interface Circuit
-6-
BO05A13620
SFP 155M 1310nm 20KM
RoHS Compliant Optical Transceiver
10. Mechanical Specifications (Unit: mm)
Contact Information
CBO GmbH
Friedhofstraße 25
45478 Mülheim an der Ruhr
Germany
Tel.:
Fax.:
eMail:
web:
0049 – 208 – 777 247 - 0
0049 – 208 – 777 247 - 99
info@cbo-it.de
www.cbo-it.de
-7-
Download PDF
Similar pages