QuickSpecs
HP 5920 Switch Series
Overview
Product overview
The HP 5920 Switch Series is made up of high-density 10GbE, ultra-deep packet buffering, top-of-rack (ToR) switches. These switches
are part of the HP FlexNetwork architecture's HP FlexFabric solution module and are ideally suited for deployments at the server
access layer of large enterprise data centers. The HP 5920 Switch Series is also designed for content delivery networks, especially
when they are used to reduce network congestion at the I/O that is associated with the heavy use of server virtualization, as well as
bursty multimedia, storage applications, and other critical services. With the increase in virtualized applications and server-to-server
traffic, businesses now require ToR switch innovations that will meet their needs for higher-performance server connectivity,
convergence of Ethernet and storage traffic, the capability to handle virtual environments, and ultra-deep packet buffering all in a
single device.
Key features
Ultra-deep packet buffering
HP IRF for virtualization and a 2-tier architecture
High 10GbE ToR port density
IPv6 support in ToR with full L2/L3 features
TRILL and VEPA readiness for virtualized networks
Features and benefits
Quality of Service (QoS)
Powerful QoS features
Flexible classification
creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS)
precedence; supports filter, redirect, mirror, remark, and logging
Feature support
provides support for Strict Priority Queuing (SP), Weighted Fair Queuing (WFQ), Weighted Deficit Round Robin (WDRR),
SP+WDRR together, configurable buffers, Explicit Congestion Notification (ECN), and Weighted Random Early Detection
(WRED)
Data center optimized
DA - 14260 North America — Version 14 — March 19, 2014
Page 1
QuickSpecs
HP 5920 Switch Series
Overview
High-performance 10 GbE switching
enables you to scale your server-edge 10GbE ToR deployments with 24 high-density 10GbE ports delivered in a 1RU design;
delivers a 480 Gbps (357.12 Mpps) switching capacity in addition to incorporating 3.6 GB of packet buffers
Ultra-deep packet buffering
provides up to a 3.6 GB packet buffer to eliminate network congestion at the I/O that is associated with the heavy use of server
virtualization, as well as bursty multimedia, storage applications, and other critical
services
Higher scalability
HP Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access networks; up to four HP 5920
switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter, two-tier FlexFabric
networks using IRF, which reduces cost and complexity
Advanced modular operating system
Comware v7 software's modular design and multiple processes deliver native high stability, independent process monitoring,
and restart; the OS also allows individual software modules to be upgraded for higher availability and supports enhanced
serviceability functions like hitless software upgrades with single-chassis ISSU
TRILL and VEPA ready
Transparent Interconnection of Lots of Links (TRILL) is supported to increase the scale of enterprise data centers; EVB/VEPA
provides connectivity into the virtual environment for a data center-ready environment
Reversible airflow
switches are enhanced for data center hot/cold aisle deployments with reversible front-to-back or back-to-front airflow
Redundant fans and power supplies
1+1 internal redundant and hot-pluggable power supplies and dual fan trays enhance reliability and availability
Lower OPEX and greener data center
provide reversible airflow and advanced chassis power management
Data Center Bridging (DCB) protocols
support IEEE 802.1Qbb Priority Flow Control (PFC), Data Center Bridging Exchange (DCBX), and IEEE 802.1Qaz Enhanced
Transmission Selection (ETS) for converged applications
FCoE support
provides support for FCoE, including expansion, fabric, trunk VF and N ports, aggregation of E-port, N-port virtualization; fabric
services such as name server, registered state change notification, and login services; per-VSAN fabric services, FSPF, soft and
hard zoning, Fibre Channel traceroute, ping, debugging, and FIP snooping
Jumbo frames
with frame sizes of up to 10,000 bytes on Gigabit Ethernet and 10-Gigabit ports, high-performance remote backup and disasterrecovery services can be enabled
Management
IEEE 802.1ab LLDP discovery
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network
management applications
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Out-of-band interface
isolates management traffic from user data plane traffic for complete isolation and total reachability, no matter what happens
in the data plane
Remote configuration and management
is available through a secure command-line interface (CLI) over Telnet and SSH; Role-Based Access Control (RBAC) provides
multiple levels of access; Configuration Rollback and multiple configurations on the flash provide ease of operation; remote
DA - 14260 North America — Version 14 — March 19, 2014
Page 2
QuickSpecs
HP 5920 Switch Series
Overview
visibility with sFlow and SNMP v1/v2/v3 is fully supported in HP Intelligent Management Center (IMC)
ISSU and hot patching
provides hitless software upgrades with single-unit In Services Software Upgrade (ISSU) and hitless patching of modular OS
Autoconfiguration
provides automatic configuration via DHCP autoconfiguration
Network Time Protocol (NTP) and Secure Network Time Protocol (SNTP)
synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clock-dependent
devices within the network so that the devices can provide diverse applications based on the consistent time
Resiliency and high availability
Intelligent Resilient Framework (IRF)
HP IRF technology enables an HP FlexFabric to deliver resilient, scalable, and secured data center networks for physical and
virtualized environments; up to four 5920 switches can be grouped together in an IRF configuration, which allows them to be
configured and managed as a single switch with a single IP address; this simplifies ToR deployment and management, reducing
data center deployment and operating expenses
Layer 2 switching
Address Resolution Protocols (ARP)
supports static, dynamic, and reverse ARP and ARP proxy
Flow Control
IEEE 802.3x Flow Control provides intelligent congestion management via PAUSE frames
Ethernet Link Aggregation
IEEE 802.3ad Link Aggregation of up to 128 groups of 16 ports; support for LACP, LACP Local Forwarding First, and LACP Short
Timeout provide a fast, resilient environment that is ideal for the data center
Spanning Tree Protocol (STP)
STP (IEEE 802.1D), Rapid STP (RSTP, IEEE 802.1w), and Multiple STP (MSTP, IEEE 802.1s) provide loop avoidance
VLAN support
provides support for 4,096 VLANs based on port, MAC address, IPv4 subnet, protocol, and guest VLAN; supports VLAN mapping
IGMP support
provides support for IGMP Snooping, Fast-Leave, Group-Policy, and IPv6; IGMP Snooping provides Layer 2 optimization of
multicast traffic
DHCP support at Layer 2
provides full DHCP Snooping support, including DHCP Snooping Option 82, DHCP Relay Option 82, DHCP Snooping Trust, and
DHCP Snooping Item Backup
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2
network
OAM support
provides support for Connectivity Fault Management (IEEE 802.1AG) and Ethernet in the First Mile (IEEE 802.3AH); provides
additional monitoring that can be used for fast fault detection and recovery
Layer 3 routing
Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
allow quick failover of router ports
DA - 14260 North America — Version 14 — March 19, 2014
Page 3
QuickSpecs
HP 5920 Switch Series
Overview
Policy-based routing
makes routing decisions based on policies set by the network administrator
Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, BGP, and IS-IS
Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports RIPng, OSPFv3, BGP4+ for IPv6, and IS-ISv6
Additional information
Green IT and power
use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy efficiency
Low power consumption
is rated to have one of the lowest power usages in the industry by Miercom independent tests
Warranty and support
1-year warranty
with advance replacement and 10-calendar-day delivery (available in most countries)
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to
www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with
your product purchase, refer to www.hp.com/networking/warrantysummary
DA - 14260 North America — Version 14 — March 19, 2014
Page 4
QuickSpecs
HP 5920 Switch Series
Configuration
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
HP 5920AF-24XG Switch
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP or SFP+ Transceivers
Must select min 2 Fan Tray
Must select min 1 Power Supply
1U - Height
Note 1
The following Transceivers install into this switch:
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
HP X240 10G SFP+ 7m DAC Cable
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
JG296A
See Configuration
Note: 1
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
JD061A
JD062A
JD063B
JD089B
JD098B
JD099B
JD118B
JD119B
Box Level Integration CTO Models
CTO Solution Sku HP 59xx Configure-to-order Switch Solution
SSP trigger sku
CTO Switch
HP 5920AF-24XG Switch
Chassis
24 fixed 1000/10000 SFP+ ports
(min=0 \ max=24 SFP or SFP+ Transceivers)
Must select min 2 Fan Tray
Must select min 1 Power Supply
1U - Height
Note 1
The following Transceivers install into this switch: (Use #0D1 or #B01 quoted
to switch if switch is CTO) - if applicable
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
DA - 14260 North America — Version 14 — March 19, 2014
JG505A
JG296A
See Configuration
Note: 1, 10
JD092B
JD093B
JD094B
Page 5
QuickSpecs
HP 5920 Switch Series
Configuration
Note 10
HP X130 10G SFP+ LC ER 40km Transceiver
JG234A
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
JD095C
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
JD096C
HP X240 10G SFP+ SFP+ 3m DAC Cable
JD097C
HP X240 10G SFP+ SFP+ 5m DAC Cable
JG081C
HP X240 10G SFP+ 7m DAC Cable
JC784C
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X125 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the
Switch Chassis and integrated to the JG505A - HP 59xx CTO Switch Solution. (Min 1/Max 1 Switch
per SSP)
Rack Level Integration CTO Models
HP 5920AF-24XG Switch
24 fixed 1000/10000 SFP+ ports
(min=0 \ max=24 SFP or SFP+ Transceivers)
Must select min 2 Fan Tray
Must select min 1 Power Supply
1U - Height
Note 1
The following Transceivers install into this switch: (Use #0D1 quoted to switch
if switch is CTO) - if applicable
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ SFP+ 0.65m DAC Cable
HP X240 10G SFP+ SFP+ 1.2m DAC Cable
HP X240 10G SFP+ SFP+ 3m DAC Cable
HP X240 10G SFP+ SFP+ 5m DAC Cable
HP X240 10G SFP+ 7m DAC Cable
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
DA - 14260 North America — Version 14 — March 19, 2014
JG296A
See Configuration
Note: 1,2,4,5
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
JD061A
JD062A
JD063B
JD089B
JD098B
JD099B
JD118B
JD119B
Page 6
QuickSpecs
HP 5920 Switch Series
Configuration
Note 2
Note 4
Note 5
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord). (See
Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the
Defaulted Power Cable option on the Switches/Routers.
Switch Height is 2U if the JG297A - HP 5920AF-24XG Bk(pwr)-Frt(prt) Fn Tray is ordered #0D1
with this switch.
REMARK: This only applies for CTO Rack Level Integration.
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the JG296A - HP 5920AF24XG Switch needs to integrate (with #0D1) to the HP Rack.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Internal Power System (std 0 // max 2) User Selection (min 1 // max 2) per switch
Supplies
HP 58x0AF 650W AC Power Supply
includes 1 x c13, 300w
PDU Cable NA/MEX/TW/JP
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
C15 PDU Jumper Cord (ROW)
HP 58x0AF 650W DC Power Supply
JC680A
See Configuration
Note: 1,2
JC680A#B2B
JC680A#B2B
JC681A
See Configuration
Note: 1
Configuration Rules
Note 1
If 2 power supplies are selected they must be the same Sku number.
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU
Power Cord) . (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C
should be the Defaulted Power Cable option on the Switches/Routers.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America,
Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack
Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson
Default for BTO and Box Level CTO)
Localization
HP A58x0AF 650W AC Power Supply - Chile - English localization
Power Cord: Quantity : 1, CEI 23-50, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0825
HP A58x0AF 650W AC Power Supply - U.S. - English localization
Power Cord: Quantity : 1, NEMA 5-15P, C13 STRAIGHT, 125 V, 10 A, 3 meters, 9.85 feet , Part
Store #: 8121-0822
HP A58x0AF 650W AC Power Supply - Europe - English localization
Power Cord: Quantity : 1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0823
DA - 14260 North America — Version 14 — March 19, 2014
JC680A#A1X
JC680A#ABA
JC680A#ABB
Page 7
QuickSpecs
HP 5920 Switch Series
Configuration
HP A58x0AF 650W AC Power Supply - Australia - English localization
Power Cord: Quantity : 1, AS/NZS 3112, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part
Store #: 8121-0828
HP A58x0AF 650W AC Power Supply - Brazil - Portuguese localization
Power Cord: Quantity : 1, NBR 14136 Fig13, C13 STRAIGHT, 250 V, 2.5 A, 2.5 meters, 8.21 feet ,
Part Store #: 8121-1069
HP A58x0AF 650W AC Power Supply - Korea - English localization
Power Cord: Quantity : 1, CEE 7-VII, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0823
HP A58x0AF 650W AC Power Supply - United Kingdom - English localization
Power Cord: Quantity : 1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store
#: 8121-0824
HP A58x0AF 650W AC Power Supply - Switzerland - English localization
Power Cord: Quantity : 1, SEV 6534-2 Type 12, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet ,
Part Store #: 8121-0827
HP A58x0AF 650W AC Power Supply - Denmark - English localization
Power Cord: Quantity : 1, DK 2-5A, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0826
HP A58x0AF 650W AC Power Supply - Japan - English localization
Power Cord: Quantity : 1, JIS C 8303, C13 STRAIGHT, 125 V, 12 A, 2.3 meters, 7.55 feet , Part Store
#: 8120-4753
HP A58x0AF 650W AC Power Supply - India - English localization
Power Cord: Quantity : 1, IS 1293, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0928
HP A58x0AF 650W AC Power Supply - South Africa - English localization
Power Cord: Quantity : 1, SABS 164, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0919
HP A58x0AF 650W AC Power Supply - Israel - English localization
Power Cord: Quantity : 1, SI 32 90-DEG, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet , Part
Store #: 8121-1035
HP A58x0AF 650W AC Power Supply - Thailand - English localization
Power Cord: Quantity : 1, NEMA 5-15P, C13 STRAIGHT, 250 V, 10 A, 2.5 meters, 8.21 feet , Part
Store #: 8121-0673
HP A58x0AF 650W AC Power Supply - China - English localization
Power Cord: Quantity : 1, GB 1002, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store #:
8121-0829
HP A58x0AF 650W AC Power Supply - Taiwan - English localization
Power Cord: Quantity : 1, CNS 690 Type 2(1), C13 STRAIGHT, 125 V, 13 A, 3.6 meters, 11.82 feet ,
Part Store #: 8121-0965
HP A58x0AF 650W AC Power Supply - Malaysia - English localization
Power Cord: Quantity : 1, BS 1363/A, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store
#: 8121-0824
HP A58x0AF 650W AC Power Supply - Argentina - English localization
Power Cord: Quantity : 1, IRAM 2073, C13 STRAIGHT, 250 V, 10 A, 3 meters, 9.85 feet , Part Store
#: 8121-0883
DA - 14260 North America — Version 14 — March 19, 2014
JC680A#ABG
JC680A#AC4
JC680A#AC6
JC680A#ACC
JC680A#ACD
JC680A#ACE
JC680A#ACF
JC680A#ACJ
JC680A#ACQ
JC680A#AKJ
JC680A#AKL
JC680A#AKM
JC680A#ARB
JC680A#ARE
JC680A#ARM
Page 8
QuickSpecs
HP 5920 Switch Series
Configuration
Transceivers
SFP
Transceivers
SFP+
Transceivers
Switch Options
Fan Trays
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X130 10G SFP+ LC SR Transceiver
HP X130 10G SFP+ LC LRM Transceiver
HP X130 10G SFP+ LC LR Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
HP X130 10G SFP+ LC ER 40km Transceiver
JD062A
JD063B
JD089B
JD098B
JD099B
JD118B
JD119B
JD092B
JD093B
JD094B
JD095C
JD096C
JD097C
JG081C
JC784C
JG234A
System (std 0 // max 2) User Selection (min 2 // max 2) per switch
HP 5920AF-24XG Back (power-side) to Front (port-side) Airflow Fan Tray
HP 5920AF-24XG Front (port-side) to Back (power-side) Airflow Fan Tray
JG297A
See
Configuration
Note: 1
JG298A
See
Configuration
Note: 1
Configuration Rules
Note 1
Fan Trays cannot be mixed in the same switch enclosure
Remarks:
Watson Blue Text:
If there is any empty space below the switch in a rack when using Back to
Front Fan Trays, JG297A, the rack will receive an Air Plenum kit that takes
up 1U of additional space in the rack. The Air Plenum kit is not required on
fully configured racks. This only applies for CTO Rack Level Integration.
The Air Plenum Kit is a non-saleable SKU, and is brought in automatically
for CTO Factory Rack Level Integration.
DA - 14260 North America — Version 14 — March 19, 2014
Page 9
QuickSpecs
HP 5920 Switch Series
Technical Specifications
HP 5920AF-24XG Switch (JG296A)
Ports
Power supplies
Fan tray
Physical characteristics
24 fixed 1000/10000 SFP+ ports
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
2 power supply slots
1 minimum power supply required (ordered separately)
2 fan tray slots
The customer must order fan trays, as fan trays are not included with the switch. This system requires two
same-direction airflow fan trays to function properly. The system should not be operated with only one
fan tray for more than 24 hours. The system should not be operated without a fan tray more than two
minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F
(45°C). Failure to comply with these operating requirements may void the product warranty.
Dimensions
1.72(h) x 17.32(w) x 27.56(d) x in (4.36 x 44.0 x 70.0 x cm) (1U height)
Weight
=29.76 lb (13.5 kg)
Memory and processor
256 MB flash, 2 GB SDRAM; packet buffer size: 3.6 GB
Performance
Latency
< 1.7 µs (64-byte packets)
Throughput
367 million pps
Routing/Switching
capacity
480 Gbps
Routing table size
16000 entries (IPv4)
MAC address table size
128000 entries
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 62.1 dB, High-speed fan: 76.7 dB
Environment
Electrical characteristics Maximum heat
dissipation
1249 BTU/hr (1317.7 kJ/hr)
Voltage
100-240 VAC
DC voltage
-36 to -72 VDC
Idle power
343 W
Maximum power rating
366 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
DA - 14260 North America — Version 14 — March 19, 2014
Page 10
QuickSpecs
HP 5920 Switch Series
Technical Specifications
Safety
Emissions
Immunity
Management
Notes
Services
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J;
NOM; ROHS Compliance
VCCI Class A
EN 55022 Class A
ICES-003 Class A
ANSI C63.4 2003
AS/NZS CISPR 22 Class A
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1:2001+A2:2005
EMC Directive 2004/108/EC
FCC (CFR 47, Part 15) Class A
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
EN 61000-4-8; IEC 61000-4-8
Voltage dips and
interruptions
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
IMC - Intelligent Management Center; command-line interface; out-of-band management; SNMP Manager;
Telnet; FTP
The customer must order a power supply, as the device does not come with a PSU. At least one JC680A or
JC681A is required.
3-year, parts only, global next-day advance exchange (U1V72E)
3-year, 4-hour onsite, 13x5 coverage for hardware (U1V62E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U1V64E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (U6A03E)
3-year, 24x7 SW phone support, software updates (U1V70E)
4-year, 4-hour onsite, 13x5 coverage for hardware (U6A05E)
4-year, 4-hour onsite, 24x7 coverage for hardware (U6A07E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U6A15E)
4-year, 24x7 SW phone support, software updates (U6A13E)
5-year, 4-hour onsite, 13x5 coverage for hardware (U6A17E)
5-year, 4-hour onsite, 24x7 coverage for hardware (U6A19E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (U6A27E)
5-year, 24x7 SW phone support, software updates (U6A25E)
3 Yr 6 hr Call-to-Repair Onsite (U1V67E)
4 Yr 6 hr Call-to-Repair Onsite (U6A10E)
5 Yr 6 hr Call-to-Repair Onsite (U6A22E)
1-year, 4-hour onsite, 13x5 coverage for hardware (U1V96E)
DA - 14260 North America — Version 14 — March 19, 2014
Page 11
QuickSpecs
HP 5920 Switch Series
Technical Specifications
1-year, 4-hour onsite, 24x7 coverage for hardware (U1V98E)
1-year, 6 hour Call-To-Repair Onsite for hardware (U1W00E)
1-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support and software updates
(U1V60E)
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times
in your area, please contact your local HP sales office.
Standards and protocols
(applies to all products in
series)
BGP
RFC 1163 Border Gateway Protocol (BGP)
RFC 1771 BGPv4
RFC 1997 BGP Communities Attribute
RFC 2918 Route Refresh Capability
RFC 3392 Capabilities Advertisement with BGP-4
RFC 4271 A Border Gateway Protocol 4 (BGP-4)
RFC 4360 BGP Extended Communities Attribute
RFC 4456 BGP Route Reflection: An Alternative to
Full Mesh Internal BGP (IBGP)
RFC 4760 Multiprotocol Extensions for BGP-4
Device management
RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 1591 DNS (client)
RFC 1902 (SNMPv2)
RFC 1908 (SNMP v1/2 Coexistence)
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP V1, V2, V3)
Multiple Configuration Files
Multiple Software Images
SSHv1/SSHv2 Secure Shell
TACACS/TACACS+
General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol
(LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3ag Ethernet OAM
IEEE 802.3ah Ethernet in First Mile over Point to
Point Fiber - EFMF
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 4253 The Secure Shell (SSH) Transport Layer
Protocol
RFC 4254 The Secure Shell (SSH) Connection
Protocol
RFC 4364 BGP/MPLS IP Virtual Private Networks
(VPNs)
RFC 4419 Diffie-Hellman Group Exchange for the
Secure Shell (SSH) Transport Layer Protocol
RFC 4594 Configuration Guidelines for DiffServ
Service Classes
RFC 4941 Privacy Extensions for Stateless Address
Autoconfiguration in IPv6
IPv6
RFC 2080 RIPng for IPv6
RFC 2460 IPv6 Specification
RFC 2711 IPv6 Router Alert Option
RFC 2740 OSPFv3 for IPv6
RFC 3315 DHCPv6 (client only)
RFC 4291 IP Version 6 Addressing Architecture
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 5095 Deprecation of Type 0 Routing Headers in
IPv6
MIBs
RFC 1213 MIB II
RFC 1907 SNMPv2 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
LLDP-MIB
Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
DA - 14260 North America — Version 14 — March 19, 2014
Page 12
QuickSpecs
HP 5920 Switch Series
Technical Specifications
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 856 TELNET
RFC 868 Time Protocol
RFC 896 Congestion Control in IP/TCP Internetworks
RFC 903 RARP
RFC 950 Internet Standard Subnetting Procedure
RFC 959 File Transfer Protocol (FTP)
RFC 1058 RIPv1
RFC 1091 Telnet Terminal-Type Option
RFC 1141 Incremental updating of the Internet
checksum
RFC 1142 OSI IS-IS Intra-domain Routing Protocol
RFC 1191 Path MTU discovery
RFC 1213 Management Information Base for
Network Management of TCP/IP-based internets
RFC 1253 (OSPF v2)
RFC 1350 TFTP Protocol (revision 2)
RFC 1531 Dynamic Host Configuration Protocol
RFC 1533 DHCP Options and BOOTP Vendor
Extensions
RFC 1534 DHCP/BOOTP Interoperation
RFC 1541 DHCP
RFC 1591 DNS (client only)
RFC 1624 Incremental Internet Checksum
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2338 VRRP
RFC 2453 RIPv2
RFC 2581 TCP Congestion Control
RFC 2644 Directed Broadcast Control
RFC 3046 DHCP Relay Agent Information Option
RFC 3768 Virtual Router Redundancy Protocol
(VRRP)
RFC 4250 The Secure Shell (SSH) Protocol Assigned
Numbers
RFC 4251 The Secure Shell (SSH) Protocol
Architecture
RFC 4252 The Secure Shell (SSH) Authentication
Protocol
IEEE 802.1D (STP)
RFC 3164 BSD syslog Protocol
RFC 3176 sFlow
SNMPv1/v2c/v3
OSPF
RFC 1587 OSPF NSSA
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
RFC 3137 OSPF Stub Router Advertisement
RFC 3623 Graceful OSPF Restart
RFC 4577 OSPF as the Provider/Customer Edge
Protocol for BGP/MPLS IP Virtual Private Networks
(VPNs)
RFC 4811 OSPF Out-of-Band LSDB
Resynchronization
RFC 4812 OSPF Restart Signaling
RFC 4813 OSPF Link-Local Signaling
RFC 5340 OSPFv3 for IPv6
QoS/CoS
IEEE 802.1P (CoS)
RFC 1349 Type of Service in the Internet Protocol
Suite
RFC 2474 DiffServ Precedence, including 8
queues/port
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 3168 The Addition of Explicit Congestion
Notification (ECN) to IP
RFC 3247 Supplemental Information for the New
Definition of the EF PHB (Expedited Forwarding PerHop Behavior)
RFC 3260 New Terminology and Clarifications for
DiffServ
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
Access Control Lists (ACLs)
Guest VLAN for 802.1x
Port Security
SSHv1/SSHv2 Secure Shell
DA - 14260 North America — Version 14 — March 19, 2014
Page 13
QuickSpecs
HP 5920 Switch Series
Accessories
HP 5920 Switch Series
accessories
Transceivers
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X130 SFP+ LC SR Transceiver
HP X130 SFP+ LC LRM Transceiver
HP X130 SFP+ LC LR Transceiver
HP X130 10G SFP+ LC ER 40km Transceiver
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
Power Supply
HP 58x0AF 650W AC Power Supply
HP 58x0AF 650W DC Power Supply
Fan Tray
HP 5920AF-24XG Back (power-side) to Front (port-side) Airflow Fan Tray
HP 5920AF-24XG Front (port-side) to Back (power-side) Airflow Fan Tray
DA - 14260 North America — Version 14 — March 19, 2014
JD061A
JD062A
JD063B
JD098B
JD099B
JD118B
JD119B
JD089B
JD092B
JD093B
JD094B
JG234A
JD095C
JD096C
JD097C
JG081C
JC784C
JC680A
JC681A
JG297A
JG298A
Page 14
QuickSpecs
HP 5920 Switch Series
Accessory Product Details
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X125 1G SFP LC LH40
1310nm Transceiver
(JD061A)
Ports
Connectivity
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1310 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
A small form-factor
cm)
pluggable SFP Gigabit LH40
Full configuration weight 0.04 lb. (0.02 kg)
transceiver that provides a
full duplex Gigabit solution Electrical characteristics Power consumption typical 0.8 W
Power consumption
1.0 W
up to 40km on a singlemaximum
mode fiber.
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
HP X120 1G SFP LC LH40
1550nm Transceiver
(JD062A)
40km distance
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Ports
Connectivity
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connector type
LC
Wavelength
1550 nm
Physical characteristics Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
A small form-factor
cm)
pluggable (SFP) Gigabit
Full configuration weight 0.04 lb. (0.02 kg)
LH40 transceiver that
Electrical characteristics Power consumption typical 0.8 W
provides a full-duplex
Power consumption
1.0 W
Gigabit solution up to 40
maximum
km on a single mode fiber.
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
Services
40km distance
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14260 North America — Version 14 — March 19, 2014
Page 15
QuickSpecs
HP 5920 Switch Series
Accessory Product Details
HP X125 1G SFP LC LH70
Transceiver (JD063B)
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1550 nm
Physical characteristics
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Electrical characteristics Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Services
HP X120 1G SFP LC SX
Transceiver (JD118B)
Dimensions
Maximum distance:
• 70km
Fiber type
Single Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Ports
1 LC 1000BASE-SX port
Connectivity
Connector type
LC
Wavelength
850 nm
A small form-factor
pluggable (SFP) Gigabit SX Physical characteristics
transceiver that provides a
full-duplex Gigabit solution
up to 550m on a Multimode
Electrical characteristics
fiber.
Cabling
Services
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14260 North America — Version 14 — March 19, 2014
Page 16
QuickSpecs
HP 5920 Switch Series
Accessory Product Details
HP X120 1G SFP LC LX
Transceiver (JD119B)
Ports
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connectivity
Connector type
LC
Wavelength
1300 nm
A small form-factor
pluggable (SFP) Gigabig LX Physical characteristics
transceiver that provides a
full duplex Gigabit solution
up to 550m on MMF or
Electrical characteristics
10Km on SMF
Cabling
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
Full configuration weight 0.04 lb. (0.02 kg)
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cable type:
Either single mode or multimode;
Services
HP X125 1G SFP RJ45 T
Transceiver (JD089B)
Dimensions
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Both
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connectivity
Connector type
Physical characteristics Dimensions
A small form factor
pluggable (SFP) Gigabit
Full configuration weight
1000Base-T transceiver
that provides a full duplex Electrical characteristics Power consumption
Gigabit solution up to
typical
100m on a Cat-5+ cable.
Power consumption
maximum
Cabling
RJ-45
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
0.07 lb. (0.03 kg)
0.8 W
1.0 W
Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Services
Maximum distance:
• 100m
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
DA - 14260 North America — Version 14 — March 19, 2014
Page 17
QuickSpecs
HP 5920 Switch Series
Accessory Product Details
To learn more, visit: www.hp.com/networking
© Copyright2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 14260 North America — Version 14 — March 19, 2014
Page 18
Download PDF
Similar pages