Data Sheet
Highlights
Hardware Models
• 12, 24, and 48-port GbE models
• 4 x 1GbE available uplink ports
upgradeable to 10GbE via software
license (except for extended
temperature models)
• SFP, Copper PoE-Plus, non-PoE and
100Base-FX models
• Extended 0°C to 60°C operating
range models
• Two SummitStack-V stacking ports
(except for extended temperature
models) enable up to 8 switches to
be stacked together
• All configurations non-blocking
full duplex
• 10GbE LRM support on 48-port
switch models
Features
• Side-to-side, left-to-right airflow
• Fixed power supplies, along with RPS
• Full PoE-Plus 30W power on
48-port models
• DC Power option
• Energy Efficient Ethernet
• 10MB/100MB half-duplex support
• Role-based policy capabilities allow
individualized access to specific
applications or services
• ExtremeCloud™ cloud-based
management on select models
• Extreme Management
Center Support
ExtremeSwitching™ X440-G2
Scalable Cost-Effective Edge Switch with ExtremeXOS
Modular Operating System
Product Overview
The ExtremeSwitching X440-G2 series is a scalable cost-effective family
of edge switches powered by Extreme Networks ExtremeXOS, a highly
resilient OS providing continuous uptime, manageability and operational
efficiency. The X440-G2 series switches provide high-performance routing
and switching, flexible stacking, PoE-plus support and comprehensive
security, while extending the benefits of ExtremeXOS to the campus edge.
The X440-G2 Series easy-to-use, yet powerful, management services
include role-based policies for controlled access to specific network
applications. Select X440-G2 Series switches can also be cloud-managed
via ExtremeCloud™, Extreme Networks innovative single-pane subscriptionbased management solution.
Intelligent Switching
The X440-G2 Series supports sophisticated and intelligent Layer 2
switching, as well as Layer 3 IPv4/IPv6 routing. They also support rolebased policy capabilities, Provider Bridges, bidirectional Access Control
Lists, as well as granular (8 Kbps) ingress/egress bandwidth control.
Altogether, these enable fine-grained control over traffic flows, as well as
controlled access to specific network services and application.
Flexible 10GBE Port Upgrades
All X440-G2 base models come equipped with 4 upgradeable 1GbE ports,
resident on either the faceplate or rear panel of each model. These 1GbE
ports can be upgraded to 10GbE Ethernet via a simple software license.
This gives administrators the option to increase switch uplink speeds
without replacing the entire switch.
WWW.EXTREMENETWORKS.COM
1
Notes: 10GbE upgrades are not supported on extended
temperature models. The two rear-panel 1GbE copper combo ports
on the 48 port switches become 10GBase-T ports when either
10GbE license is applied to the rear-panel SFP/SFP+ ports.
High-Performance Stacking
ExtremeXOS SummitStack-V capabilities allow up to eight
X440-G2 switches to be stacked together via two of the
native X440-G2 stacking ports. SummitStack-V allows use
of standard 10Gb Ethernet cabling and optics technologies,
providing longdistance stacking connectivity of up to 40
Km while eliminating the cable complexity of non-standard
stacking options. X440-G2 switches can be stacked with
other X450-G2, X460-G2, X670-G2 and X770 switches via
SummitStack-V so long as all are running the same version
of ExtremeXOS.
Note 1: SummitStack-V uses two of the four available uplink ports
on the X440-G2 and runs a 10Gb non-Ethernet stacking protocol.
These stacking ports DO NOT require a 10GbE software license, and
can take full advantage of standard SFP+ transceivers.
Note 2: Extended temperature range switches do not
support stacking.
IEEE 802.3AT Poe-Plus
X440-G2 Series switches support both IEEE 802.3at
PoE-Plus and IEEE 802.3af PoE to enable connection
of standards compliant PoE devices today and into the
future. Power over Ethernet allows connection of Ethernetpowered devices, such as wireless access points, Voice over
IP phones, and security cameras. The X440-G2 can also
support full PoE-Plus 30W power across all 48 ports with
an external redundant power supply (RPS).
Role-Based Policy
The X440-G2 supports role-based policies that can be
centrally administered through the ExtremeManagement
(formerly Netsight) policy manager. This policy framework
empowers network administrators to define distinct roles
or profiles to represent industry-specific operational groups
that may exist in an education or a business environment
(e.g., administrator, teacher, student, guest). Each defined
role can then begranted individualized access to specific
network services and applications and these access
privileges remain associated with users as they move across
both wired and wireless network access points.
ExtremeCloud™ Management
Provides a single plane of glass for cloud managing both
the wired and wireless components of your network. Zero
touch provisioning also significantly reduces deployment
times. Select X440-G2 models have been enabled for use
with ExtremeCloud. See the ExtremeCloud Data Sheet
for details.
USB 2.0 Support
All X440-G2 switches have a USB 2.0 port that is supported
as a port to a storage device for all EXOS versions of 22.1
or higher.
Extended Temperature Range Support
The X440-G2 include three switch models that support 0°C
to 60°C operating range (Models 16539, 16540 and 16541)
to address the unique environmental needs of specific
industries and/or locations.
Comprehensive Security Management
The X440-G2 provides comprehensive security, including:
• User policy and host integrity enforcement, and
identity management.
• Universal Port Dynamic Security Profiles for fine
granular security policies across the network.
• Threat detection and response instrumentation to react
to network intrusion.
• Denial of Service (DoS) protection and IP security
against man-in-the-middle and DoS attacks.
These features ensure both the security of the network and
of users accessing the network.
Audio Video Bridging (AVB)
The X440-G2 series supports IEEE 802.1 Audio Video
Bridging to enable reliable, real-time audio/video
transmission over Ethernet. AVB technology delivers the
quality of service required for today’s high-definition and
time-sensitive multimedia streams.
Note: Only 24 ports on either the 24 or 48 port models
support AVB.
Ordering Notes
All X440-G2 switches ship with fixed fans and
power supplies:
• All the X440-G2 switches support optional external
redundant power supplies (RPS).
• The following three switch models that support 0C to
60C are NOT upgradeable to 10GbE:
• X440-G2-24fx-GE4
• X440-G2-12t8fx-GE4
• X440-G2-24t-GE4
WWW.EXTREMENETWORKS.COM
2
Specifications
Switch Model
Maximum
10/100/1000 Base-T
Ports
Maximum Active 1Gb
SFP Ports
Maximum 10Gb
SFP+ Ports
Aggregated Switch
Bandwidth*
Frame Forwarding
Rate*
X440-G2-12t-10GE4
12
4
4 via license
104 GBPS
77.4 MPPS
X440-G2-24t-10GE4
24
8 (4 + 4 Combo)
4 via license
128 GBPS
95.2 MPPS
X440-G2-48t-10GE4
48
8 (2 + 6 Combo)
4 via license
176 GBPS
130.9 MPPS
X440-G2-12p-10GE4
12
4
4 via license
104 GBPS
77.4 MPPS
X440-G2-24p-10GE4
24
8 (4 + 4 Combo)
4 via license
128 GBPS
95.2 MPPS
X440-G2-48p-10GE4
48
8 (2 + 6 Combo)
4 via license
176 GBPS
130.9 MPPS
X440-G2-24t-10GE4-DC
24
8 (4 + 4 Combo)
4 via license
128 GBPS
95.2 MPPS
X440-G2-48t-10GE4DC
48
8 (2 + 6 Combo)
4 via license1
176 GBPS
130.9 MPPS
X440-G2-24x-10GE4
4 Combo
28 (24 + 4 Combo)
4 via license
128 GBPS
95.2 MPPS
X440-G2-24fx-GE4
24 100 Base-FX
4
0
12.8 GBPS
9.5 MPPS
X440-G2-12t8fx-GE4
12 10/100/1000 +
8 100 Base-FX
4
0
33.6 GBPS
25.0 MPPS
X440-G2-24t-GE4
24 10/100/1000
4
0
56 GBPS
41.7 MPPS
¹ 2 10GBase-T combo ports
*-with 10Gb licenses if available with license
• LRM support on rear-panel SFP/SFP+ ports on all
48-port switches
• Less than 4 microsecond latency (64-byte)
• Layer 2/MAC Addresses: 16K
• Policy Capabilities
• IPv4 LPM Entries: 480
• IPv4 Hosts: 1000
• Policy Profiles: 63
• IPv6 LPM (64-bit) Entries: 240
• Rules per Profile: Up to 440
• Authenticated Policy Users per Switch: Up to 256
• Authenticated Policy Users per Port: Up to 256
• 1,024 ingress bandwidth meters, 256 egress meters
• Unique Permit/Deny Rules per switch: 440
• Ingress and egress bandwidth policing/rate limiting per
flow/ACL
• 4092 user-created VLAN/VMANs
• 9216 Byte Max Packet Size (Jumbo Frame)
• 128 load sharing trunks, up to 8 members per trunk
• 8 QoS egress queues/port
• Egress bandwidth rate shaping per egress queue and
per port.
• Rate Limiting Granularity: 8 Kbps
• Half-duplex 10/100 supported on the following
• MAC Rules: N/A
• IPv4 Rules: 256
• IPv6 Rules: N/A
• L2 Rules: 184
• Rate Limiting: Per Class of Service
10/100/1000 ports:
• 12 port switches: Ports 1-12
• 48 port switches: Ports 1-16
• 48 port switches: Ports 1-16 and Ports 25-40
WWW.EXTREMENETWORKS.COM
3
Specifications (Cont.)
Switch Hardware
Ports
•
•
•
•
•
12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet
via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port
X440-G2-24t-10GE4
•
•
•
•
•
•
24 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated) combo ports
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-48t-10GE4
•
•
•
•
•
•
•
48 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated) combo ports
2 x 1GbE copper combo ports upgradable to 10GbE on rear-panel
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
•
•
•
•
•
12 x 10/100/1000BASE-T PoE-Plus
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via
licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-24p-10GE4
•
•
•
•
•
•
24 x 10/100/1000BASE-T PoE-Plus
4 x 1GBASE-X SFP (unpopulated) combo ports
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-48p-10GE4
•
•
•
•
•
•
•
48 x 10/100/1000BASE-T PoE-Plus
4 x 1GBASE-X SFP (unpopulated) combo ports
2 x 1GbE copper combo ports upgradable to 10GbE on rear-panel
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-24t-10GE4-DC
•
•
•
•
•
•
24 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated) combo ports
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-48t-10GE4-DC
•
•
•
•
•
•
•
48 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated) combo ports
2 x 1GbE copper combo ports upgradable to 10GbE on rear-panel
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-24x-10GE4
•
•
•
•
•
•
24 x SFP (unpopulated)
4 x 10/100/1000 combo ports
4 x 1GBASE-X SFP (unpopulated rear-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-12t-10GE4
X440-G2-12p-10GE4
WWW.EXTREMENETWORKS.COM
4
Specifications (Cont.)
Switch Hardware
Ports
X440-G2-24fx-GE4
•
•
•
•
•
24 x 100Base-FX – LC connectors
4 x 1GBASE-X SFP (unpopulated front-panel ports)
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-12t8fx-GE4
•
•
•
•
•
12 x 10/100/1000BASE-T with 8 x 100Base-FX – LC connectors
4 x 1GBASE-X SFP (unpopulated front-panel ports)
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
X440-G2-24t-GE4
•
•
•
•
•
24 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated rear-panel ports)
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
2x7 RPS port
Physical
Switch Model
Weight
Height
Width
Depth
X440-G2-12t-10GE4
5.82 lb (2.64 kg)
1 RU / 1.73 inches (4.4 cm)
12.01 inches (30.5 cm)
10.28 inches (26.1 cm)
X440-G2-24t-10GE4
8.07 lb (3.66 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
10.01 inches (25.4 cm)
X440-G2-48t-10GE4
11.22 lb (5.09 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
14.51 inches (36.85 cm)
X440-G2-12p-10GE4
6.66 lb (3.02 kg)
1 RU / 1.73 inches (4.4 cm)
12.01 inches (30.5 cm)
10.28 inches (26.1 cm)
X440-G2-24p-10GE4
9.44 lb (4.28 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
10.01 inches (25.4 cm)
X440-G2-48p-10GE4
14.55 lb (6.60 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
14.51 inches (36.85 cm)
X440-G2-24t-10GE4-DC
8.07 lb (3.66 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
10.01 inches (25.4 cm)
X440-G2-48t-10GE4-DC
11.20 lb (5.08 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
14.51 inches (36.85 cm)
X440-G2-24x-10GE4
8.22 lb (3.73 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
10.01 inches (25.4 cm)
X440-G2-24fx-GE4
8.66 lb (3.93 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
10.01 inches (25.4 cm)
X440-G2-12t8fx-GE4
6.50 lb (2.95 kg)
1 RU / 1.73 inches (4.4 cm)
12.01 inches (30.5 cm)
10.28 inches (26.1 cm)
X440-G2-24t-GE4
7.98 lb (3.62 kg)
1 RU / 1.73 inches (4.4 cm)
17.36 inches (44.1 cm)
10.01 inches (25.4 cm)
CPU/Memory
• 64-bit MIPS Processor, 1 GHz clock, single core
• 1GB ECC DDR3 DRAM
• 4GB eMMC Flash
• 1.5MB packet buffer on 12 - 24 port switches, 3.0MB
packet buffer on 48 port switches
Stacking
• SummitStack-V with support for up to eight switches
per stack.
• Mixed stacking with other Extreme X-Series switches,
so long as all are running the same ExtremeXOS version.
• Requires two of the four available X440-G2
uplink ports.
LED Indicators
• Per port status LED including power status.
• System Status LEDs: management, fan and power.
• 7 segment display of stack number – operational on
switches that support stacking.
WWW.EXTREMENETWORKS.COM
5
Note: SummitStack-V stacking is enabled on two of the four
to 1GbE, unless upgraded via software license. 10GbE licenses are
X440-G2 uplink ports by default (no license required). All stacking
available, in both two- and four-port versions, as well as a license to
ports operate at 10Gb,but do not use standard Ethernet protocols.
upgrade a dual 10GbE uplink switch to a four 10GbE uplink swiitch,
X440-G2 uplink ports, when not used for stacking, run the standard
that enable X440-G2 uplink ports to run the 10Gb
Ethernet protocol. Non-stacking uplink ports are limited by default
Ethernet protocol.
Mapping of the two default X440-G2 stacking ports to their respective physical chassis interface #’s — by chassis type —
are listed below.
X440-G2 Switches*
Stack Port #
Physical Uplink Port # On Chassis
1
49 (Rear Panel, Dedicated SFP+ Port)
2
50 (rear panel, dedicated SFP+ port)
48 Port Models
24 Port Models
12 Port Models
1
27 (Rear Panel)
2
28 (Rear Panel)
1
15 (Front Panel)
2
16 (Front Panel)
*The three extended temperature X440-G2 models (16539, 16540 and 16541) do NOT stack.
Power
Switch Model
Minimum¹ Heat
Dissipation (BTU/HR)
Minimum¹ Power
Consumption (Watts)
Maximum² Heat
Dissipation (BTU/HR)
Maximum² Power
Consumption (Watts)
X440-G2-12t-10GE4
52
15
109
32
X440-G2-24t-10GE4
87
26
136
40
X440-G2-48t-10GE4
141
41
208
61
X440-G2-12p-10GE4
72
21
216 (@200W PoE)
264
X440-G2-24p-10GE4
121
35
410 (@380W PoE)
500
X440-G2-48p-10GE4
196
53
755 (@740W PoE)
961
X440-G2-24t-10GE4-DC
77
23
134
39
X440-G2-48t-10GE4-DC
137
40
207
61
X440-G2-24x-10GE4
87
26
172
51
X440-G2-24fx-GE4
166
49
223
65
X440-G2-12t8fx-GE4
108
32
159
47
X440-G2-24t-GE4
76
22
130
38
¹ Idle no ports linked
2 fans high all ports 100% traffic
The Non-PoE Extended Temperature Switches
(X440-G2-24FX-GE4, X440-G2-12T8FX-GE4,
X440-G2-24T-GE4)
The 12, 24, and 48 Port 10/100/1000 Models
(Both PoE and Non-PoE)
Fixed Internal Power Supply
Fixed Internal Power Supply
Voltage Input Range
100 - 240 VAC†
Voltage Input Range
100 - 240 VAC†
Line Frequency Range
50 - 60 Hz +/ - 5%
Line Frequency Range
50 - 60 Hz +/ - 5%
Power Supply Input Socket
IEC 320 C14
Power Supply Input Socket
IEC 320 C14
Power Cord Input Plug
IEC 320 C13
Power Cord Input Plug
IEC 320 C13
Operating Temperature
0⁰ C to 60⁰ C Normal Operation
Operating Temperature
0⁰ C to 50⁰ C Normal Operation
† - The power supplies will continue to operate +- 10% of the rated input to accommodate temporary loss of input voltage regulation.
WWW.EXTREMENETWORKS.COM
6
Switch Model
Power Supply
Input Socket
Power Cord Input
Plug/Input Socket
Power Supply
Cord Gauge
Redundant Power
Supply Input Socket
X440-G2-12t-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
Coaxial Barrel Connector
X440-G2-24t-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
X440-G2-48t-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
X440-G2-12p-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
X440-G2-24p-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
2x7 Terminal Block
X440-G2-48p-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 16AWG/1.25mm²
(100-125VAC),
Min 18AWG/.75mm²
(200-240VAC)
X440-G2-24t-10GE4-DC
#6 Terminal Block
23
Min 14AWG/2.0mm²
2x7 Terminal Block
X440-G2-48t-10GE4-DC
#6 Terminal Block
40
Min 14AWG/2.0mm²
2x7 Terminal Block
X440-G2-24x-10GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
X440-G2-24fx-GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
X440-G2-12t8fx-GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
X440-G2-24t-GE4
IEC 320 C14
IEC 320 C13/C14
Min 18AWG/0.75mm²
2x7 Terminal Block
PoE-Plus Power Budget
Switch Model
Internal Power Supply
External RPS
X440-G2-12p-10GE4
200 W
200 W – Redundant Power Only
X440-G2-24p-10GE4
380 W
380 W – Redundant Power Only
X440-G2-48p-10GE4
740 W
1440 W – Additive Power
740 W – Redundant Power
Environmental Specifications
Packaging and Storing Specifications
• EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage
• Temp: -40° C to 70° C (-40° F to 158° F)
• EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transportation
• Humidity: 10% to 95% relative humidity,
non-condensing
• EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational
• EN/ETSI 300 753 (1997-10) - Acoustic Noise
• ASTM D3580 Random Vibration Unpackaged 1.5 G
Environmental Compliance
• EU RoHS – 2011/65/EU
• EU WEEE – 2012/19/EU
• China RoHS – SJ/T 11363-2006
Operating Conditions
• Packaged Shock (half sine): 180 m/s2 (18 G), 6 ms,
600 shocks
• Packaged Vibration: 5 to 62 Hz at velocity 5 mm/s, 62
to 500 Hz at 0.2 G
• Packaged Random Vibration: 5 to 20 Hz at 1.0 ASD
w/–3 dB/oct. from 20 to 200 Hz
• Packaged Drop Height: 14 drops minimum on sides and
corners at 42 inches (<15 kg box)
• Temp: 0° C to 50° C (32° F to 122° F) – all models
Regulatory and Safety
• Temp: 0° C to 60° C (32° F to 140° F) – extended
temperature range models only (16539, 16540 and
16541)
North American ITE
• Humidity: 10% to 95% relative humidity,
non-condensing
• Altitude: 0 to 3,000 meters (9,842 feet) – All Switch
Models
• UL 60950-1 2nd Ed., Listed Device (U.S.)
• CSA 22.2 #60950-1-03 2nd Ed. (Canada)
• Complies with FCC 21CFR 1040.10 (U.S. Laser Safety)
• CDRH Letter of Approval (US FDA Approval)
• Shock (half sine): 30 m/s2 (3 G), 11 ms, 6 shocks
• Random vibration: 3 to 500 Hz at 1.5 G rms
WWW.EXTREMENETWORKS.COM
7
European ITE
Country Specific
• EN 60950-1:2007 2nd Ed.
• VCCI Class A (Japan Emissions)
• EN 60825-1+A2:2001 (Lasers Safety)
• ACMA RCM (Australia Emissions)
• 2006/95/EC Low Voltage Directive
• CCC Mark
International ITE
• CB Report & Certificate per IEC 60950-1 2nd Ed. +
National Differences
• AS/NZS 60950-1 (Australia /New Zealand)
EMI/EMC Standards
North American EMC for ITE
• FCC CFR 47 part 15 Class A (USA)
• ICES-003 Class A (Canada)
European EMC Standards
• EN 55022:2006+A1:2007 Class A
• EN 55024:A2-2003 Class A includes IEC 61000-4-2, 3,
4, 5, 6, 11
• KCC Mark, EMC Approval (Korea)
Telecom Standards
• CE 2.0 Compliant
IEEE 802.3 Media Access Standards
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3ae 10GBASE-X
• IEEE 802.3at PoE-Plus
• IEEE 802.3az
• IEEE 802.3u, 100Base-FX
Fan and Acoustic Noise
Switch Model
• EN 61000-3-2,8-2006 (Harmonics)
Bystand
Sound Pressure*
Declared Sound
Power (LWAD)*
X440-G2-12t-10GE4
0 dB(A) Fan Off
0 bels Fan Off
X440-G2-24t-10GE4
28.1 dB(A)
4.3 bels
• EN 61000-3-3 2008 (Flicker)
• ETSI EN 300 386 v1.4.1, 2008-04 (EMC
Telecommunications)
• 2004/108/EC EMC Directive
International EMC Certifications
Acoustic Information
X440-G2-48t-10GE4
37.9 dB(A)
5.4 bels
X440-G2-12p-10GE4
0 dB(A) Fan Off
0 bels Fan Off
X440-G2-24p-10GE4
39.4 dB(A)
5.5 bels
• CISPR 22: 2006 Ed 5.2, Class A (International
Emissions)
X440-G2-48p-10GE4
48.7 dB(A)
6.4 bels
X440-G2-24t-10GE4-DC
28.1 dB(A)
4.3 bels
• CISPR 24:A2:2003 Class A (International Immunity)
X440-G2-48t-10GE4-DC
37.9 dB(A)
5.4 bels
• IEC 61000-4-2:2008/EN 61000-4-2:2009 Electrostatic
Discharge, 8kV Contact, 15 kV Air, Criteria A
X440-G2-24x-10GE4
26.8 dB(A)
4.0 bels
X440-G2-24fx-GE4
24.7 dB(A)
3.9 bels
• IEC 61000-4-3:2008/EN 61000-4-3:2006+A1:2008
Radiated Immunity 10V/m, Criteria A
X440-G2-12t8fx-GE4
23.3 dB(A)
4.0 bels
X440-G2-24t-GE4
28.1 dB(A)
4.3 bels
• IEC 61000-4-4:2004 am1 ed.2./EN 61000-4-4:2004/
A1:2010 Transient Burst, 1 kV, Criteria A
*- At 25⁰C and 50% PoE Load where applicable
• IEC 61000-4-5:2005 /EN 61000-4-5:2006 Surge, 2 kV
L-L, 2 kV L-G, Level 3, Criteria A
• IEC 61000-4-6:2008/EN 61000-4-6:2009 Conducted
Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A
• IEC/EN 61000-4-11:2004 Power Dips & Interruptions,
>30%, 25 periods, Criteria C
WWW.EXTREMENETWORKS.COM
8
External Redundant Power Supplies For Non-PoE Switches
All X440-G2 series non-PoE switches ship with one fixed internal power supply. If redundancy is required, an external RPS
can be attached to the switch.
Model Number
Description
External redundant power supply Unit 90 Watts with cable for X440-G2-12t-10GE4 , Power cord ordered separately,
order 10947 C5 to C14 Converter to utilize a C13 power cord.
RPS-90
150 watt non-PoE redundant power supply for A, B, C, X450-G2 and X440-G2 switches, power cord ordered
separately.
STK-RPS-150PS
STK-RPS-150CH2
2-Slot modular shelf for rack-mounting 150W redundant power supplies (STK-RPS-150PS).
STK-RPS-150CH8
8-Slot modular shelf for rack-mounting 150W redundant power supplies (STK-RPS-150PS).
External redundant power supply unit 150 Watts with cable - Extended Temperature Range from 0 to +60 degrees
Celsius, power cord ordered separately.
RPS-150XT
3-Slot modular shelf for rack-mounting 150W extended temperature redundant power supplies (RPS-150XT) or 1005W
PoE+ redundant power supplies (STK-RPS-1005PS).
STK-RPS-1005CH3
EPS-C2
External Power System Chassis 2. Accepts up to three 750W AC PoE PSU 48V power supplies. Accepts up to 5
EPSCBL-2x7 or up to 1 EPS-CBL-2x9 cables. Ships with one EPS-CBL-2x7 cable.
EPS-CBL-2x7
External Power System Cable (1M) that connects EPS-C2 to any X440 or X450-G2 non-PoE switch for providing
redundant DC power.
750W AC PSU
AC Power Supply module for EPS-C2 Chassis Redundant Power Supply, power cord ordered separately.
External Redundant Power Supplies For PoE X440-G2 Switches
All X440-G2 series PoE switches ship with fixed internal power supplies.
RPS Use Table
RPS-90
12t
X
24t, 24x, 48t, 24fx,
12t8fx
STK-RPS-150PS
RPS-150XT
EPS-C2
RPS-500P
X
X
X
X
X
X
12p and 24p
STK-RPS-1005PS
X
48p
RPS Model
RPS-90
Redundant Power Supply Output
Coaxial Barrel Connector
STK-RPS-150PS
1 terminal block of 2x7 pins - provides system power and up to 150 watts of power
RPS-150XT
1 terminal block of 2x7 pins - provides system power and up to 150 watts of power
EPS-C2
1 terminal block of 2x9 pins - used for other Summit switches
5 terminal blocks of 2x7 pins - used for Summit X440-G2’s
RPS-500p
1 terminal block of 2x7 pins - provides system power and up to 380 watts of IEEE802.3at power
STK-RPS-1005PS
1 terminal block of 2x7 pins - provides system power and up to 740 watts of IEEE802.3at power
WWW.EXTREMENETWORKS.COM
9
RPS Model
Allowable PSU
Power Cord Input
Plug/Socket
Power Cord Gauge
RPS-90
Not Applicable
IEC 320 C5/C14
Min 18AWG/0.75mm²
STK-RPS-150PS
Not Applicable
IEC 320 C13/C14
Min 18AWG/0.75mm²
RPS-150XT
Not Applicable
IEC 320 C13/C14
Min 18AWG/0.75mm²
EPS-C2
Summit 750W PoE AC PSU
IEC 320 C13/C14
Min 18AWG/0.75mm²
RPS-500p
Not Applicable
IEC 320 C13/C14
Min 18AWG/0.75mm²
IEC 320 C13/C16
Min 16AWG/1.25mm²
(100-125VAC),
Min 18AWG/.75mm²
(200-240VAC)
STK-RPS-1005PS
Not Applicable
RPS Model
Weight
Dimensions
RPS-90
0.73 lb (0.33 kg)
Height: 1.06 inches ( 2.69 cm)
Width: 5.20 inches ( 13.21 cm)
Depth: 2.25 inches ( 5.72 cm)
STK-RPS-150PS
3.85 lb (1.75 kg)
Height: 2.04 inches ( 5.2 cm)
Width: 7.7 inches ( 19.6 cm)
Depth: 10.1 inches ( 25.7 cm)
RPS-150XT
3.22 lb (1.46 kg)
Height: 1.77 inches ( 4.50 cm)
Width: 6.07 inches ( 15.42 cm)
Depth: 13.00 inches ( 33.02 cm)
EPS-C2
2.27 lb (1.03 kg)
Height: 1RU, 1.73 inches (4.4 cm)
Width: 17.4 inches (44.1 cm)
Depth: 15.1 inches (38.4 cm)
RPS-500p
8.06 lb (3.66 kg)
Height: 1RU, 1.73 inches (4.4 cm)
Width: 17.4 inches (44.1 cm)
Depth: 7.9 inches (20.1 cm)
STK-RPS-1005PS
4.63 lb (2.1kg)
Height: 1.77 inches (4.5 cm)
Width: 6.07 inches ( 15.42 cm)
Depth: 13.39 inches (34.0 cm)
Warranty
• Ltd. Lifetime with eAHR - 2
• For warranty details, visit:
http://www.extremenetworks.com/go/warranty
Ordering Information
Part Number
Name
16530
X440-G2-12t-10GE4
X440-G2 12 10/100/1000BASE-T, 4 1GbE unpopulated SFP upgradable to 10GbE SFP+, 1
Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license
16531
X440-G2-12p-10GE4
X440-G2 12 10/100/1000BASE-T POE+, 4 1GbE unpopulated SFP upgradable to 10GbE
SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license
16531T
X440-G2-12p-10GE4-TAA
X440-G2 12 10/100/1000BASE-T POE+, 4 1GbE unpopulated SFP upgradeable to 10GbE
SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license, TAA model
16532
X440-G2-24t-10GE4
X440-G2 24 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable to
10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license
WWW.EXTREMENETWORKS.COM
Description
10
Part Number
Name
Description
16532T
X440-G2-24t-10GE4-TAA
X440-G2 24 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradeable to
10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license, TAA model
16533
X440-G2-24p-10GE4
16533T
X440-G2-24p-10GE4-TAA
16534
X440-G2-48t-10GE4
X440-G2 48 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable
to 10GbE SFP+ (2 combo/2 non-combo), 2 1GbE copper combo upgradable to 10GbE, 1
Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license
16535
X440-G2-48p-10GE4
X440-G2 48 10/100/1000BASE-T POE+, 4 SFP combo, 4 1GbE unpopulated SFP
upgradable to 10GbE SFP+ (2 combo/2 non-combo), 2 1GbE copper combo upgradable
to 10GbE, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license
16535T
X440-G2-48p-10GE4-TAA
X440-G2 48 10/100/1000BASE-T POE+, 4 SFP combo, 4 1GbE unpopulated SFP
upgradeable to 10GbE SFP+ (2 combo/2 non-combo), 2 1GbE copper combo upgradable
to 10GbE, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS, TAA model
16536
X440-G2-24t-10GE4-DC
X440-G2 24 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable to
10GbE SFP+, 1 Fixed DC PSU, 1 RPS port, ExtremeXOS Edge license
16537
X440-G2-48t-10GE4-DC
X440-G2 48 10/100/1000BASE-T, 4 SFP combo, 4 1GbE unpopulated SFP upgradable
to 10GbE SFP+ (2 combo/2 non-combo), 2 1GbE copper combo upgradable to 10GbE, 1
Fixed DC PSU, 1 RPS port, ExtremeXOS Edge license
16538
X440-G2-24x-10GE4
X440-G2 24 unpopulated 1000BASE-X SFP (4 combo), 4 10/100/1000 combo, 4 1GbE
unpopulated SFP upgradable to 10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS
Edge license
16538T
X440-G2-24x-10GE4-TAA
X440-G2 24 unpopulated 1000BASE-X SFP (4 combo), 4 10/100/1000 combo, 4 1GbE
unpopulated SFP,upgradeable to 10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS
Edge license, TAA model
16539
X440-G2-24fx-GE4
16540
X440-G2-12t8fx-GE4
16541
X440-G2-24t-GE4
16521
X440 Adv. Edge License
16522
X440 OpenFlow Feature Pack
16523
X440 Multimedia(AVB)
Feature Pack
16542
Dual 10GbE Upgrade
License
License that converts the two non-stack 1GbE SFP ports to be 10GbE SFP+
16543
Quad 10GbE Upgrade
License
License that converts four 1GbE SFP ports to be 10GbE SFP+
16546
Quad 10GbE Lic from Dual
10GbE Lic
10301
10GBASE-SR SFP+
10GBASE-SR SFP+, 850nm, LC Connector, transmission length of up to 300m on MMF
10302
10GBASE-LR SFP+
10GBASE-LR SFP+, 1310nm, LC Connector, transmission length of up to 10km on SMF
10309
10GBASE-ER SFP+
10GBASE-ER SFP+, 1550nm, LC connector, transmission length of up to 40km on SMF
10303
SFP+ LRM Module
10 Gigabit Ethernet SFP+ module, 1310nm, legacy MMF 220m link, LC connector
WWW.EXTREMENETWORKS.COM
X440-G2 24 10/100/1000BASE-T POE+, 4 SFP combo, 4 1GbE unpopulated SFP
upgradable to 10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license
X440-G2 24 10/100/1000BASE-T POE+, 4 SFP combo, 4 1GbE unpopulated SFP
upgradeable to 10GbE SFP+, 1 Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license,
TAA model
X440-G2 24 fixed 100BASE-FX LC connectors, 4 1GBASE-X unpopulated SFP, 1 Fixed AC
PSU, 1 RPS port, ExtremeXOS Edge license, 0⁰C to 60⁰C operation
X440-G2 12 10/100/1000BASE-T plus 8 fixed 100BASE-FX LC connectors, 4 1GBASE-X
unpopulated SFP, 1
Fixed AC PSU, 1 RPS port, ExtremeXOS Edge license, 0⁰C to 60⁰C operation
X440-G2 24 fixed 10/100/1000BASE-TX , 4 1GBASE-X unpopulated SFP, 1 Fixed AC PSU,
1 RPS port, ExtremeXOS Edge license, 0⁰C to 60⁰C operation
ExtremeXOS Advanced Edge License for X440/X440-G2 series switches
ExtremeXOS SDN - OpenFlow Feature Pack for X440/X440-G2 series switches
ExtremeXOS Multimedia Service (Audio Video Bridging) Feature Pack for X440/
X440-G2 series switches
Software license that upgrades an already licensed X440-G2 Dual 10GbE switch to a
Quad 10GbE switch
11
Part Number
Name
Description
10948
RPS-90
10947
C5 to C14 Converter
Power dongle for converting an IEC C5 plug to IEC C14 plug – enables the use of to utilize
a C13 power cord
STK-RPS-150PS
150W Non-PoE RPS
150 watt non-PoE redundant power supply for A, B, C and X450-G2 switches
STK-RPS-150CH2
2-Slot Modular Shelf
2-Slot Modular Shelf for rack mounting up to two150 watt (STK-RPS-150PS) external
redundant power supplies
STK-RPS-150CH8
8-Slot Modular Shelf
8-Slot Modular Shelf for rack mounting up to eight 150 watt (STK-RPS-150PS) external
redundant power supplies
10932
RPS-150 XT
External Redundant Power Supply Unit 150 Watts with cable - Extended Temperature
Range from 0 to +60 degrees Celsius, Power cord ordered separately
10923
RPS-500p
STK-RPS-1005PS
1005 W RPS
STK-RPS-1005CH3
3-Slot Modular Shelf
10936
EPS-C2
10939
EPS-CBL-2x7
External Power System Cable (1M with 2x7 pin) that connects EPS to any X440 or
X450-G2 for providing redundant power
10931
750W AC PSU
AC Power Supply module for EPS-C2 Chassis Redundant Power Supply
External Redundant Power Supply Unit 90 Watts with cable , Power cord
ordered separately
External PoE+ Redundant Power Supply Unit 500 Watts with cable, Power cord
ordered separately
1005 watt 802.3at PoE external redundant power supply for C5 PoE and
X440-48p switches
3-Slot Modular Shelf for rack mounting up to three of any combination of extended
temperature 150 watt (10932 - RPS-150 XT) or STK-RPS-1005PS external redundant
power supplies
External Power System Chassis 2. Accepts up to three 750W AC PoE PSU 48V power
supplies. Accepts up to 5 EPS-CBL-2x7 or up to 1 EPS-CBL-2x9 cables
10051H
1000BASE-SX SFP, Hi
1000BASE-SX SFP, MMF 220 & 550 meters, LC connector, Industrial Temp
10052H
1000BASE-LX SFP, Hi
1000BASE-LX SFP, MMF 220 & 550 meters, SMF 10km, LC connector, Industrial Temp
10053H
1000BASE-ZX SFP, Hi
1000BASE-ZX SFP, SMF 70km, LC connector, Industrial Temp
10056H
1000BASE-BX-D BiDi SFP, Hi
1000BASE-BX-D SFP, 1490-nm TX/1310-nm RX wavelength, Industrial Temp
10057H
1000BASE-BX-U BiDi SFP, Hi
1000BASE-BX-U SFP, 1310-nm TX/1490-nm RX wavelength, Industrial Temp
10060
100FX/1000LX SFP2
10070H
10/100/1000BASE-T SFP, Hi ²
10/100/1000BASE-T, SFP, CAT 5 cable 100m, RJ-45 Connector, Industrial Temp ²
100FX/1000LX SFP, SMF, LC Connector (Requires MCP and 6dB Attenuator for 100FXMMF Operation)²
10071H
1000BASE-SX SFP 10 Pack, Hi
1000BASE-SX SFP 10 Pack, Industrial Temp
10072H
1000BASE-LX SFP 10 Pack, Hi
1000BASE-LX SFP 10 Pack, Industrial Temp
MGBIC-BX120-D
1000BASE-BX-D BiDi SFP
120Km
1 Gb, 1000Base-BX120-D Single Fiber SM, Bidirectional, 1590nm Tx / 1490nm Rx, 120 Km,
Simplex LC SFP (must be paired with MGBIC-BX120-U), -40°C to +60°C
MGBIC-BX120-U
1000BASE-BX-U BiDi SFP
120Km
1 Gb, 1000Base-BX120-U Single Fiber SM, Bidirectional, 1490nm Tx / 1590nm Rx, 120 Km,
Simplex LC SFP (must be paired with MGBIC-BX120-D), -40°C to +60°C
10063
100FX SFP¹
10067
100BASE-FX SFP¹
100Mb, 100BASE-FX, MMF 2Km, LC¹
100BASE-FX SFP module, MMF 2km link, LC-connector for Fast Ethernet SFP Port¹
10304
10GBASE-CR SFP+ 1m
10GBASE-CR SFP+ pre-terminated twin-ax copper cable with link lengths of 1m
10305
10GBASE-CR SFP+ 3m
10GBASE-CR SFP+ pre-terminated twin-ax copper cable with link lengths of 3m
10306
10GBASE-CR SFP+ 5m
10GBASE-CR SFP+ pre-terminated twin-ax copper cable with link lengths of 5m
10307
10GBASE-CR SFP+ 10m3
10325
DWDM SFP+
10338
10Gb SFP+ 10GBASE-T4
WWW.EXTREMENETWORKS.COM
10GBASE-CR SFP+ pre-terminated twin-ax copper cable with link lengths of 10m*
10 Gigabit Ethernet SFP+ Tunable DWDM module, SMF 80km, LC connector
10Gb SFP+, 10GBASE-T RJ45, 30m with Cat6a4
12
Part Number
Name
Description
10GB-ZR-SFPP
10GB 80KM SFP+
10GB-BX40-D
10 GB, SINGLE FIBER SM,
-D 40 KM
10Gb, 10GBASE-ZR, SM, 1550nm, 80Km, LC SFP+
10Gb, Single Fiber SM, Bidirectional, 1330nm Tx / 1270nm RX, 40Km, Simplex LC SFP+
(must be paired with 10GB-BX40-U)
10GB-BX40-U
10 GB, SINGLE FIBER SM,
-U 40 KM
10Gb, Single Fiber SM, Bidirectional, 1270nm Tx / 1330nm RX, 10Km, Simplex LC SFP+
(must be paired with 10GB-BX40-D)
10GB-BX10-D
10 GB, SINGLE FIBER SM,
-D 10 KM
10Gb, Single Fiber SM, Bidirectional, 1330nm Tx / 1330nm RX, 40Km, Simplex LC SFP+
(must be paired with 10GB-BX10-U)
10GB-BX10-U
10 GB, SINGLE FIBER SM,
-U 10 KM
10Gb, Single Fiber SM, Bidirectional, 1270nm Tx / 1330nm RX, 10Km, Simplex LC SFP+
(must be paired with 10GB-BX10-D)
10GB-F10-SFPP
10 GB, ACTIVE OPTICAL
DAC, 10 M
10Gb, Active optical direct attach cable with 2 integrated SFP+ transceivers, 10m
10GB-F20-SFPP
10 GB, ACTIVE OPTICAL
DAC, 20 M
10Gb, Active optical direct attach cable with 2 integrated SFP+ transceivers, 20m
MGBIC-BX40-D
1000BASE-BX40-D
BIDIRECTIONAL SFP
1Gb, 1000Base-BX40-D Single Fiber SM, Bidirectional, 1490nm Tx / 1310nm RX, 40Km,
Simplex LC SFP (must be paired with MGBIC-BX40-U), -40⁰C to +60⁰C
MGBIC-BX40-U
1000BASE-BX40-U
BIDIRECTIONAL SFP
1Gb, 1000Base-BX40-U Single Fiber SM, Bidirectional, 1310nm Tx / 1490nm RX, 40Km,
Simplex LC SFP (must be paired with MGBIC-BX40-D), -40⁰C to +60⁰C
MGBIC-BX10-D
1000BASE-BX-D SFP 10KM
1Gb, 1000Base-BX10-D Single Fiber SM, Bidirectional, 1490nm Tx / 1310nm RX, 10Km,
Simplex LC SFP (must be paired with MGBIC-BX10-U)
MGBIC-BX10-U
1000BASE-BX-U SFP 10KM
1Gb, 1000Base-BX10-U Single Fiber SM, Bidirectional, 1310nm Tx / 1490nm RX, 10Km,
Simplex LC SFP (must be paired with MGBIC-BX10-D)
I-MGBIC-LC03
Industrial 1000Base-LX
1310nm MMF Transceiver
I-MGBIC-GSX
Industrial 1000Base-SX
850nm Transceiver
-40⁰C to +60⁰C, 1Gb, 1000Base-SX, IEEE 802.3 MM, 850nm Short Wave Length,
220/550m, LC SFP
I-MGBIC-GLX
Industrial 1000Base-LX
1310nm SM Transceiver
-40⁰C to +60⁰C, 1Gb, 1000Base-LX, MM – 550m, SM – 10 km, 1310 nm Long Wave Length,
LC SFP, LC SFP
-40⁰C to +60⁰C, 1Gb, 1000BASE-LX, MM, 1310 nm, 2 km with 62.5 MMF, 1 km with 50 MMF,
LC SFP
¹ – Supported in 24 SFP ports in 16538, not supported on SFP
3 – Supported on 48 port 10GbE ports only ExtremeCloud
combo ports or SFP/SFP+ uplink ports.
Management – 16530, 16531, 16532, 16533, 16534 and 16535
² – Supported in 24 SFP ports in 16538, not supported on SFP
combo ports, 1Gb Mode Only on SFP/SFP+ uplink port.
switches are enabled for use with ExtremeCloud. For details and
ordering part numbers for ExtremeCloud Management, see the
ExtremeCloud datasheet.
4 Supported configuration is to populate every other SFP+ port in
system, with a maximum of half the 10Gb SFP+ ports configured
with 10GBASE-T transceivers. An adjacent SFP+ port should remain
unused for every 10GBASE-T SFP+ installed
http://www.extremenetworks.com/contact
Phone +1-408-579-2800
©2017 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in
the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks please
see http://www.extremenetworks.com/company/legal/trademarks. Specifications and product availability are subject to change without notice. 10450-0717-05
WWW.EXTREMENETWORKS.COM
13
Download PDF
Similar pages