Intel® X18-M/X25-M SATA Solid State Drive -34 nm - MA

Intel® X18-M/X25-M SATA Solid State Drive 34 nm Product Line
SSDSA1MH080G2, SSDSA2MH080G2, SSDSA1MH160G2, SSDSA2MH160G2
Product Manual
„
„
„
„
„
„
„
„
Available in 1.8” and 2.5” Form Factors
Capacity: 80 GB and 160 GB
Uses Intel NAND flash memory Multi-Level Cell
(MLC) components
Read and Write IOPS Specifications
(Iometer* Queue Depth 32)
— Random 4 KB Reads: Up to 35 K IOPS
— Random 4 KB Writes:
80 GB - Up to 6.6 K IOPS
160 GB - Up to 8.6 K IOPS
Bandwidth Performance Specifications
— Sustained Sequential Read: Up to 250 MB/s
— Sustained Sequential Write: Up to 70 MB/s
Latency Specifications:
— Read: 65 µs
— Write: 85 µs
Compatibility
— Intel® Matrix Storage Manager
— SATA Revision 2.6 compliant, compatible
with SATA 1.5 Gb/s and 3 Gb/s interface
rates
— ATA/ATAPI-7 Compliant
— SSD Enhanced S.M.A.R.T. ATA feature set
— Native Command Queuing (NCQ) command
set
Certifications and Declarations
— UL*
— CE*
— C-Tick*
— BSMI*
— KCC*
— Microsoft* WHQL
— VCCI*
— SATA-IO*
„
„
„
„
„
„
„
„
Power Management
— 3.3 V (1.8”) or 5 V (2.5”) SATA Supply Rail
— SATA Interface Power Management
— OS-Aware Hot Plug/Removal
Power Specifications
— Active: 150 mW (TYP)
(MobileMark* 2007 Workload)
— Idle:
75 mW (TYP)
Temperature
— Operating:
0o C to 70o C
— Non-Operating: -55o C to 95o C
Reliability
— Read Error Rate (BER):
1 sector per 1015 bits read
— Mean Time Between Failures (MTBF):
1,200,000 hours
Shock, Operating and Non-operating:
1,500 G/0.5 msec
Vibration
— Operating:
2.17 GRMS (5-700 Hz)
— Non-operating: 3.13 GRMS (5-800 Hz)
Weight
— 1.8” 5 mm Form Factor: 35 +/-2 grams
— 2.5” 7 mm Form Factor: 76 +/-2 grams
— 2.5” 9.5 mm Form Factor: 80 +/-2 grams
Product Ecological Compliance
— EU RoHS*
— Halogen-free
Order Number: 322296-001US
July 2009
Ordering Information
L
Decoder
S S D
S A
1 M H
0 8
0 G 2
X X
Product Type Designator
SSD = Solid State Disk
Ordering
Information
Bus Architecture
SA = SATA
Product Generation
1-9 Generations
Form Factor
1 = 1.8" Drive
2 = 2.5" Drive
Density
004G = 4 GB
008G = 8 GB
016G = 16 GB
032G = 32 GB
064G = 64 GB
080G = 80 GB
160G = 160 GB
Product Technology Type
S = Single Level Cell
M = Multi-Level Cell
Feature
H = High Performance
Intel High Performance Solid State Drive Ordering Information
Part Number
MM #
Device Nomenclature
Quantity
SSDSA1MH080G201
903845
80 GB SATA 1.8” 5 mm Drive, MLC, Production Unit
1 unit
SSDSA1MH080G2
901937
80 GB SATA 1.8” 5 mm Drive, MLC, Production Unit
50 units
SSDSA1MH160G201
903844
160 GB SATA 1.8” 5 mm Drive, MLC, Production Unit
1 unit
SSDSA1MH160G2
901936
160 GB SATA 1.8” 5 mm Drive, MLC, Production Unit
50 units
SSDSA2MH080G201
903847
80 GB SATA 2.5” 7 mm Drive, MLC, Production Unit
1 unit
SSDSA2MH080G2
901934
80 GB SATA 2.5” 7 mm Drive, MLC, Production Unit
50 units
SSDSA2MH160G201
903846
160 GB SATA 2.5” 7 mm Drive, MLC, Production Unit
1 unit
SSDSA2MH160G2
901933
160 GB SATA 2.5” 7 mm Drive, MLC, Production Unit
50 units
SSDSA2MH080G2C1
902383
80 GB SATA 2.5” 9.5 mm Drive, MLC, Production Unit
1 unit
SSDSA2MH080G2R5
902462
80 GB SATA 2.5” 9.5 mm Drive, MLC, Production Unit
5 units
SSDSA2MH160G2C1
902384
160 GB SATA 2.5” 9.5 mm Drive, MLC, Production Unit
1 unit
SSDSA2MH160G2R5
902464
160 GB SATA 2.5” 9.5 mm Drive, MLC, Production Unit
5 units
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS
OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING
TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,
MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for
use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the
presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel
or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for
future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This Datasheet as well as the software described in it is furnished under license and may only be used or copied in accordance with the terms of the
license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a
commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document
or any software that may be provided in association with this document.
Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any
means without the express written consent of Intel Corporation.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-5484725 or by visiting Intel's website at http://www.intel.com.
Intel and Intel logo are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others. Copyright © 2009, Intel Corporation. All Rights Reserved.
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
2
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Contents
1.0
Introduction .............................................................................................................
1.1
Product Overview ...............................................................................................
1.2
Block Diagram....................................................................................................
1.3
Architecture .......................................................................................................
2.0
Certifications and Declarations ................................................................................. 6
3.0
Product Specifications............................................................................................... 7
3.1
Capacity ............................................................................................................ 7
3.2
Performance ...................................................................................................... 7
3.3
Electrical Characteristics ...................................................................................... 8
3.3.1 Supply Voltage ........................................................................................ 8
3.3.2 Power Consumption ................................................................................. 8
3.4
Environmental Conditions .................................................................................... 9
3.4.1 Temperature ........................................................................................... 9
3.4.2 Altitude .................................................................................................. 9
3.4.3 Shock and Vibration ................................................................................. 9
3.4.4 Acoustics ................................................................................................ 9
3.4.5 Electromagnetic Immunity .......................................................................10
3.5
Reliability .........................................................................................................10
3.5.1 Nonrecoverable Read Errors .....................................................................11
3.5.2 Mean Time Between Failure......................................................................11
3.5.3 Power On/Off Cycles ...............................................................................11
3.5.4 Minimum Useful Life................................................................................11
3.5.5 Insertion Cycles......................................................................................11
4.0
Mechanical Information ...........................................................................................11
4.1
1.8” 5 mm Intel X18-M SATA SSD........................................................................11
4.2
2.5” 7 mm Intel X25-M SATA SSD........................................................................13
4.3
2.5” 9.5 mm Intel X25-M SATA SSD .....................................................................14
5.0
Pin and Signal Descriptions......................................................................................15
5.1
Pin Locations.....................................................................................................15
5.1.1 1.8” Pin Locations ...................................................................................15
5.1.2 2.5” Pin Locations ...................................................................................16
5.2
Signal Description Table .....................................................................................16
5.3
Hot Plug Support ...............................................................................................18
6.0
Command Sets .........................................................................................................18
6.1
ATA Commands .................................................................................................18
6.1.1 ATA General Feature Command Set...........................................................18
6.1.1.1 IDENTIFY DEVICE Data ..............................................................19
6.1.2 Power Management Command Set ............................................................21
6.1.3 Security Mode Feature Set .......................................................................22
6.1.4 SMART Command Set..............................................................................22
6.1.5 Host Protected Area Command Set............................................................22
6.1.6 48-Bit Address Command Set ...................................................................23
6.1.7 Device Configuration Overlay Command Set ...............................................23
6.1.8 General Purpose Log Command Set...........................................................23
6.2
SATA Commands ...............................................................................................23
6.2.1 Software Settings Preservation .................................................................23
6.2.2 Native Command Queuing........................................................................24
6.2.3 Device Initiated Power Management (DIPM) ...............................................24
July 2009
Order Number: 322296-001US
5
5
6
6
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
3
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
7.0
References...............................................................................................................24
8.0
Terms and Acronyms ...............................................................................................25
9.0
Revision History.......................................................................................................26
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
4
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
1.0
Introduction
The Intel® X18-M/X25-M SATA Solid State Drive (SSD) delivers leading performance in
industry standard 1.8” and 2.5” form factors while simultaneously improving system
responsiveness for client applications over standard rotating drive media or hard disk
drives. By combining Intel’s leading 34nm NAND flash memory technology with our
innovative high performance controller, Intel delivers its next generation SSD for native
Serial Advanced Technology Attachment (SATA) hard disk drive drop-in replacement
with enhanced performance, reliability, ruggedness and power savings.
Since there are no rotating platters, moving heads, or fragile actuators, unnecessary
delays due to spin-up time or positional seek time that can slow down the storage
subsystem significantly, are absent. The Intel X18-M/X25-M SATA SSD enables fast
read/write access times and a significant I/O and throughput performance
improvement as compared to rotating media or hard disk drives.
This document describes the specifications of our new addition to the Solid State Drive
product family: .Intel X18-M/X25-M SATA SSD - 34 nm product line in both the 1.8”
and 2.5” form factors.
1.1
Product Overview
The Intel X18-M/X25-M SATA SSDs primarily target SATA based client PCs, highly
rugged mobile client devices, as well as thin and light, mini/sub-notebooks. Key
attributes include high performance, low power, increased system responsiveness, high
reliability and enhanced ruggedness as compared to standard mobile SATA hard drives.
Intel X18-M/X25-M SATA SSDs are available in 1.8” and 2.5” form factors that are
electrically, mechanically, and software compatible with existing 1.8” and 2.5” Serial
ATA slots and cables. Our flexible design allows interchangeability with existing mobile
hard drives based on the SATA interface standard.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
5
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
1.2
Block Diagram
Figure 1.
Block Diagram
NAND
Flash
Memory
Flash Memory
Channel 0
SATA Interface
Intel
System
On A Chip
(SOC)
Flash Memory
Channel ...
NAND
Flash
Memory
NAND
Flash
Memory
Flash Memory
Channel n
1.3
Architecture
The Intel X18-M/X25-M SATA SSDs utilize a cost effective System on a Chip (SOC)
design to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple
flash memory devices on multiple channels internally.
2.0
Certifications and Declarations
Table 1.
Device Certifications and Declarations
Certification
CE Compliant
Description
Indicates conformity with the essential health and safety requirements set out in European
Directives Low Voltage Directive and EMC Directive.
UL Certified
Underwriters Laboratories, Inc. Component Recognition UL60950-1.
C-Tick Compliant
Compliance with the Australia/New Zealand Standard AS/NZS3548 and Electromagnetic
Compatibility (EMC) Framework requirements of the Australian Communication Authority
(ACA).
BSMI Compliant
Compliance to the Taiwan EMC standard “Limits and methods of measurement of radio
disturbance characteristics of information technology equipment, CNS 13438 Class B.”
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
6
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 1.
Device Certifications and Declarations (Continued)
Certification
Description
KCC
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility control
Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of
the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic
of Korea.
Microsoft WHQL
Microsoft Windows Hardware Quality Labs
RoHS Compliant
Restriction of Hazardous Substance Directive
VCCI
Voluntary Control Council for Interface to cope with disturbance problems caused by
personal computers or facsimile.
SATA-IO
Indicates certified logo program from Serial ATA International Organization
3.0
Product Specifications
3.1
Capacity
Table 2.
User Addressable Sectors
Unformatted Capacity
Total User Addressable Sectors in LBA Mode
80 GB
156,301,488
160 GB
312,581,808
Notes:
1.
1 GB = 1,000,000,000 Byte. LBA count shown represents total user storage capacity and will remain the same throughout
the life of the drive.
2.
The total usable capacity of the Intel SSD may be less than the total physical capacity of the Intel SSD. This is due to the
fact that a small portion of the Intel SSD capacity is used for NAND flash management and maintenance purposes.
3.
1 Sector = 512 Byte.
4.
IDEMA LBA standards adopted in calculating the LBA count.
3.2
Performance
Table 3.
Maximum Sustained Read and Write Bandwidth
Access Type
MB/s
Sequential Read
Up to 250
Sequential Write
Up to 70
Notes:
1.
Performance measured using Iometer with queue depth equal to 32.
2.
1 MB/sec = 1,048,576 bytes/sec was used in measuring sequential performance. If 1 MB/sec equals 1 million bytes/sec,
performance numbers will be 4.85 percent higher than quoted.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
7
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 4.
Latency Specifications
Type
Average Latency
Read
65 µs (TYP)
Write
85 µs (TYP)
Power On to Ready
1.50 s (TYP)
Notes:
1.
2.
3.
4.
Write Cache Enabled.
Device measured using Iometer.
Power On To Ready time is measured from power rail rising edge to the first DRDY issued from the drive.
Read/Write latency measured on sequential 4 K transfers with QD=1.
Table 5.
Random Read/Write Input/Output Operations Per Second
Access Type
IOPS
4K Read
Up to 35,000
Up to 6,600
(80GB)
4K Write
Up to 8,600
(160 GB)
Notes:
1.
Performance measured using Iometer with queue depth set to 32.
2.
Write Cache enabled.
3.
Measurements are performed on 8 GB of LBA range.
3.3
Electrical Characteristics
3.3.1
Supply Voltage
Table 6.
Operating Voltage
Description
Min
Max
Unit
Operating Voltage for 3.3 V (+/- 5%)
3.14
3.47
V
Operating Voltage for 5 V (+/- 5%)
4.75
5.25
V
3.3.2
Power Consumption
Table 7.
Typical Power Consumption
Note:
Mode
Typ
Unit
Active
150
mW
Idle
75
mW
Active power measured during execution of MobileMark* 2007 with DIPM (Device Initiated Power Management) enabled.
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
8
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
3.4
Environmental Conditions
3.4.1
Temperature
Table 8.
Temperature Related Specifications
Mode
Case Temperature
Temperature Gradient
Humidity
Min
Operating
Non-Operating
Typ
Max
Unit
0
70
o
C
-55
95
o
C
Operating
20
oC/hr
Non-Operating
30
o
*
C/hr *
Operating
5
95
%
Non-Operating
5
95
%
Notes:
1.
Temperature measured on the top side of SSD case, centered for width and one inch from SATA connector edge.
2.
Temperature gradient measured without condensation.
3.4.2
Altitude
The drive is not sensitive to changes in altitude because it has no moving parts. Drive
tested within -1K and +40K feet.
3.4.3
Shock and Vibration
Table 9.
Shock and Vibration Specifications
Mode
Shock1
Vibration2
Timing/Frequency
Max
Operating
at 0.5 msec
1,500 G
Non-Operating
at 0.5 msec
1,500 G
Operating
5-700 Hz
2.17 G
Non-Operating
5-800 Hz3
3.13 G
Notes:
1.
Shock specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting
screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using RMS value.
2.
Vibration specifications assumes that the SSD is mounted securely with the input vibration applied to the drive mounting
screws. Stimulus may be applied in the X, Y or Z axis.The measured specification is in root mean squared form. Vibration
specification is measured using RMS value.
3.
Sine wave sweeping 1 oct/min.
3.4.4
Acoustics
The SSD has no moving or noise-emitting parts; therefore, it produces negligible sound
(0 dB) in all modes of operation.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
9
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
3.4.5
Electromagnetic Immunity
Electromagnetic Immunity tests assume the SSD is properly installed in the
representative host system. The drive will operate properly without errors or
degradation in performance when subjected to radio frequency (RF) environments
referenced in the international specifications noted in these following documents:
Table 10.
Electromagnetic Immunity and Compliance Specifications
Title
Region for which
conformity declared
Description
IEC 60950-1 - 1st Edition
Safety of Information Technology Equipment
UL/CSA 60950-1 Edition
Safety of Information Technology Equipment
USA/Canada
EN 60950-1:2001
Safety of Information Technology Equipment
European Union
cTick
The EMC Framework (Radio Communication Act 1992)
FCC, 47 CFR Part 15
Radio Frequency Devices - Subpart B - Unintentional
Radiators B
ICES-003 Issue 4 - February 2004
Interface-Causing Equipment Standards - Digital Apparatus
B
Canada
BSMI CNS14348; CNS14266
Bureau of Standards, Metrology and Inspection, Ministry of
Economic Affairs Electromagnetic Compatibility
Taiwan
EN 55022 and 55024
EN 55022:2006 Information Technology Equipment - Radio
Disturbance Characteristics B;
EN 55024:1998 +A1:2001 +A2:2003 Information
Technology Equipment - Immunity Characteristics
European Union
CISPR 22:2005
Information Technology Equipment - Radio Disturbance
Characteristics B
EN61000
EN61000-3-2 Information Technology Equipment Harmonics Characteristics;EN61000-3-3 Information
Technology Equipment - Flicker Characteristics
VCCI CISPR22 B
Information Technology Equipment - Radio Disturbance
Characteristics
Japan
KCC
Framework Act on Telecommunications and Radio Waves
Act
Korea
3.5
Reliability
Table 11.
Reliability Specifications
Parameter
Nonrecoverable read errors
Australia
USA
International
European Union
Value
1 sector in 1015 bits read, max
Mean Time between Failure (MTBF)
1,200,000 hours
Power On/Off Cycles
50,000 cycles
Minimum Useful Life
5 years
Insertion Cycles
250 cycles
Note:
International
Please refer to sections 3.5.1 to 3.5.4 for more details on these reliability specifications.
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
10
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
3.5.1
Nonrecoverable Read Errors
The nonrecoverable read error rate will not exceed one sector in the specified number
of bits read. In the extremely unlikely event of a nonrecoverable read error, the drive
will report it as a read failure to the host; the sector in error is considered corrupt and
is not returned to the host.
3.5.2
Mean Time Between Failure
The Mean Time Between Failure (MTBF) is estimated based on Telcordia methodology
and demonstrated through Reliability Demonstration Test (RDT).
3.5.3
Power On/Off Cycles
Defined as power being removed from the drive, and then restored. Most host systems
remove power from the drive when entering suspend and hibernate as well as on a
system shutdown.
3.5.4
Minimum Useful Life
The drive will have a minimum of 5 years of useful life under typical client workloads
with up to 20 GB of host writes per day.
3.5.5
Insertion Cycles
The drive will support up to 250 insertion/removal cycles on SATA/power cable.
4.0
Mechanical Information
4.1
1.8” 5 mm Intel X18-M SATA SSD
The following figure shows the physical package information for the 5 mm height 1.8”
Intel X18-M SATA SSD.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
11
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Figure 2.
Dimensions for Intel X18-M SATA SSD 1.8” 5 mm Form Factor
Notes:
1.
Connector Outline: The 1.8” Intel X18-M SATA SSD connector is compliant to the SATA Rev 2.6 specifications.
2.
Connector Location: The 1.8” Intel X18-M SATA SSD connector is compliant to the micro SATA SFF-8144 specification.
3.
All dimensions are in millimeters.
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
12
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
4.2
2.5” 7 mm Intel X25-M SATA SSD
The following figure shows the physical package information for the 7 mm height 2.5”
Intel X25-M SATA SSD.
Figure 3.
Note:
Dimensions for Intel X25-M SATA SSD 2.5” 7 mm Form Factor
All dimensions are in millimeters.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
13
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
4.3
2.5” 9.5 mm Intel X25-M SATA SSD
The following figure shows the physical package information for the 9.5 mm height 2.5”
Intel X25-M SATA SSD.
Figure 4.
Note:
Dimensions for Intel X25-M SATA SSD 2.5” 9.5 mm Form Factor
All dimensions are in millimeters.
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
14
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
5.0
Pin and Signal Descriptions
This section identifies the pin locations and signal descriptions of the Intel X18-M/
X25-M SATA SSDs.
5.1
Pin Locations
5.1.1
1.8” Pin Locations
Figure 5.
Layout of Signal and Power Segment Pins
Signal Segment S1
July 2009
Order Number: 322296-001US
Power Segment P1
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
15
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
5.1.2
2.5” Pin Locations
Figure 6.
Layout of Signal and Power Segment Pins
Signal Segment S1
Note:
Power Segment P1
2.5” connector supports in-built latching capability.
5.2
Signal Description Table
Table 12.
Serial ATA Connector Pin Signal Definitions for 1.8” and 2.5” Form Factors
Note:
Pin
Function
S1
Ground
S2
A+
S3
A-
S4
Ground
S5
B-
S6
B+
S7
Ground
Definition
1st mate
Differential signal pair A
1st mate
Differential signal pair B
1st mate
Key and spacing separate signal and power segments.
Table 13.
Serial ATA Power Pin Definitions for 1.8” Form Factor
Pin
P1
Function
Definition
3.3 V Power2
V33
P2
V33
P3
Ground3
P4
Ground
3
P5
V5
3.3 V Power,
Mating Order1
2nd Mate
pre-charge2
2nd Mate
1st Mate
1st Mate
5 V Power. Not connected4
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
16
1st Mate
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 13.
Serial ATA Power Pin Definitions for 1.8” Form Factor (Continued)
Pin
Function
Definition
Mating Order1
P6
V5
5 V Power. Not connected4
2nd Mate
P7
V5
5V Power, Pre-charge
2nd Mate
Key
Key
NC
P8
Optional
Manufacturing Test Pin5
2nd Mate
NC
P9
Optional
Manufacturing Test Pin5
2nd Mate
Notes:
1.
All mate sequences assume zero angular offset between connectors.
2.
P1 and P2 are internally connected to one another within the device.
3.
Ground connectors P3 and P4 may contact before the other 1st mate pins in both the power and signal connectors to
discharge ESD in a suitably configure backplane connector.
4.
P5 and P6 are not connected internal to the device. The host may put 5V on these pins.
5.
P8 and P9 should not be connected by the host.
Table 14.
Serial ATA Power Pin Definitions for 2.5” Form Factor
Pin1
Function
Definition
P1
Not connected2
(3.3 V Power)
P2
Not
connected2
(3.3 V Power)
P3
Not connected2
(3.3 V Power. pre-charge)
3, 4
Mating Order
2nd Mate
P4
Ground
1st Mate
P5
Ground3
1st Mate
P6
3
Ground
P7
V53, 5
5 V Power
1st Mate
P8
V53, 5
5 V Power
2nd Mate
P9
V53, 5
5 V Power
2nd Mate
Device Activity Signal6
2nd Mate
1st Mate
3
P10
Ground
P11
DAS6
P12
Ground3, 4
P13
V127
12 V Power. Not used.
1st Mate
P14
V127
12 V Power. Not used.
2nd Mate
P15
V127
12 V Power. Not used.
2nd Mate
1st Mate
1st Mate
Notes:
1.
All pins are in a single row, with a 1.27 mm (0.050”) pitch.
2.
Pins P1, P2 and P3 are connected together, although they are not connected internally to the device. The host may put
3.3 V on these pins.
3.
The mating sequence are:
• the ground pins P4-P6, P10, P12 and the 5v power pin P7.
• the signal pins and the rest of the 5V power pins P8-P9.
4.
Ground connectors P4 and P12 may contact before the other 1st mate pins in both the power and signal connectors to
discharge ESD in a suitably configured backplane connector.
5.
Power pins P7, P8,and P9 are internally connected to one another within the device.
6.
The host may ground P11 if it is not used for Device Activity Signal (DAS).
7.
Pins P13, P14 and P15 are connected together, although they are not connected internally to the device. The host may put
12 V on these pins.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
17
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
5.3
Hot Plug Support
Hot Plug insertion and removal are supported in the presence of a proper connector
and appropriate operating system (OS) support as described in the SATA 2.6
specification. This product supports Asynchronous Signal Recovery and will issue an
unsolicited COMINIT when first mated with a powered connector to guarantee reliable
detection by a host system without hardware device detection.
6.0
Command Sets
6.1
ATA Commands
The Intel X18-M/X25-M SATA SSDs support all the mandatory ATA commands defined
in the ATA/ATAPI-7 specification.
6.1.1
ATA General Feature Command Set
The Intel X18-M/X25-M SATA SSDs support the ATA General Feature command set
(non-PACKET), which consists of
• EXECUTE DEVICE DIAGNOSTIC
• FLUSH CACHE
• IDENTIFY DEVICE
• READ DMA
• READ SECTOR(S)
• READ VERIFY SECTOR(S)
• SEEK
• SET FEATURES
• WRITE DMA
• WRITE SECTOR(S)
• READ MULTIPLE
• SET MULTIPLE MODE
• WRITE MULTIPLE
The Intel X18-M/X25-M SATA SSDs also support the following optional commands:
• READ BUFFFER
• WRITE BUFFER
• NOP
• DOWNLOAD MICROCODE
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
18
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
6.1.1.1
IDENTIFY DEVICE Data
The following table details the sector data returned after issuing an IDENTIFY DEVICE
command.
Table 15.
Word
Returned Sector Data
F = Fixed
V = Variable
X = Both
Default Value
Description
0
F
0040h
General configuration bit-significant information
1
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
2
V
C837h
Specific configuration
3
X
0010h
Obsolete - Number of logical heads (16)
4-5
X
0h
6
X
003Fh
Retired
Obsolete - Number of logical sectors per logical track (63)
7-8
V
0h
Reserved for assignment by the CompactFlash Association
9
X
0h
Retired
10-19
F
Varies
20-21
X
0h
Retired
Obsolete
Serial number (20 ASCII characters)
22
X
0h
23-26
F
Varies
27-46
F
Varies
Model number (Intel Solid State Drive)
8010h
7:0—Maximum number of sectors transferred per interrupt on MULTIPLE
commands
Firmware revision (8 ASCII characters)
47
F
48
F
0h
49
F
2F00h
Capabilities
50
F
4000h
Capabilities
51-52
X
0h
53
F
0007h
Words 88 and 70:64 Valid
54
X
3FFFh
Obsolete - Number of logical cylinders (16,383)
55
X
0010h
Obsolete - Number of logical heads (16)
56
X
003Fh
Obsolete - Number of logical sectors per logical track (63)
57-58
X
00FBFC10h
59
F
0110h
0950F8B0h
(80 GB)
Reserved
Obsolete
Obsolete
Number of sectors transferred per interrupt on MULTIPLE commands
60-61
F
62
X
0h
63
F
0007h
64
F
0003h
PIO modes supported
65
F
0078h
Minimum Multiword DMA transfer cycle time per word
0FFFFFFFh
(160 GB)
Total number of user addressable sectors
Obsolete
Multi-word DMA modes supported/selected
66
F
0078h
Manufacturer’s recommended Multiword DMA transfer cycle time
67
F
0078h
Minimum PIO transfer cycle time without flow control
68
F
0078h
69-70
F
0h
July 2009
Order Number: 322296-001US
Minimum PIO transfer cycle time with IORDY flow control
Reserved (for future command overlap and queuing)
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
19
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 15.
Word
Returned Sector Data (Continued)
F = Fixed
V = Variable
X = Both
Default Value
Description
71-74
F
0h
75
F
001Fh
Queue depth
Reserved for the IDENTIFY PACKET DEVICE command.
76
F
0506h
Serial ATA capabilities
77
F
0h
78
F
0048h
Serial ATA features supported
79
V
0040h
Serial ATA features enabled
80
F
00FCh
Major Version Number
81
F
001Ah
Minor Version Number
Reserved for future Serial ATA definition
82
F
746Bh
Command set supported.
83
F
7D01h
Command sets supported.
84
F
6163h
Command set/feature supported extension.
85
V
7469h
Command set/feature enabled.
86
V
BD01h
Command set/feature enabled.
87
V
6163h
Command set/feature default.
88
V
407Fh
Ultra DMA Modes
89
F
0001h
Time required for security erase unit completion
90
F
0001h
91
V
0h
92
V
FFFEh
0h
Time required for Enhanced security erase completion
Current advanced power management value
Master Password Revision Code
Hardware reset result. The contents of bits (12:0) of this word shall change
only during the execution of a hardware reset.
93
F
94
V
0h
Vendor’s recommended and actual acoustic management value.
95
F
0h
Stream Minimum Request Size
96
V
0h
Streaming Transfer Time - DMA
97
V
0h
Streaming Access Latency - DMA and PIO
98-99
F
0h
Streaming Performance Granularity
0950F8B0h
(80 GB)
100-103
V
104
V
105
106
107
F
0h
108-111
F
Varies
112-115
F
0h
Reserved for world wide name extension to 128 bits
116
V
0h
Reserved for technical report-
12A19EB0h
(160 GB)
Maximum user LBA for 48-bit Address feature set.
0h
Streaming Transfer Time - PIO
F
0h
Reserved
F
4000h
Physical sector size / logical sector size
Inter-seek delay for ISO-7779 acoustic testing in microseconds
Unique ID
117-118
F
0h
119
F
401Ch
Supported Settings
Words per Logical Sector
120
F
401Ch
Command Set/Feature Enabled/Supported
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
20
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 15.
Word
Returned Sector Data (Continued)
F = Fixed
V = Variable
X = Both
Default Value
Description
121-126
F
0h
Reserved
127
F
0h
Removable Media Status Notification feature set support
128
V
0021h
Security status
129-159
X
0h
Vendor specific
160
F
0h
CompactFlash Association (CFA) power mode 1
161-175
X
0h
Reserved for assignment by the CFA
176-205
V
0h
Current media serial number
206-216
F
0h
Reserved
217
F
0001h
218-221
F
0h
222
F
101F
Reserved
223-233
F
0h
Reserved
Non-rotating media device
Reserved
234
0001h
Reserved
235
01F0h
Reserved
Reserved
236-254
F
0h
255
X
Varies
Integrity word (Checksum and Signature)
Notes:
1.
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values may change
when media is removed or changed.
2.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the device or
the commands executed by the device.
3.
X = F or V. The content of the word may be fixed or variable.
6.1.2
Power Management Command Set
The Intel X18-M/X25-M SATA SSD supports the Power Management command set,
which consists of
• CHECK POWER MODE
• IDLE
• IDLE IMMEDIATE
• SLEEP
• STANDBY
• STANDBY IMMEDIATE
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
21
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
6.1.3
Security Mode Feature Set
The Intel X18-M/X25-M SATA SSD supports the Security Mode command set, which
consists of
• SECURITY SET PASSWORD
• SECURITY UNLOCK
• SECURITY ERASE PREPARE
• SECURITY ERASE UNIT
• SECURITY FREEZE LOCK
• SECURITY DISABLE PASSWORD
6.1.4
SMART Command Set
The Intel X18-M/X25-M SATA SSDs support the SMART command set, which consists of
• SMART ENABLE OPERATIONS
• SMART DISABLE OPERATIONS
• SMART ENABLE/DISABLE AUTOSAVE
• SMART RETURN STATUS
The Intel X18-M/X25-M SATA SSDs also support the following optional commands:
• SMART EXECUTE OFF-LINE IMMEDIATE
• SMART READ DATA
• SMART READ LOG
• SMART WRITE LOG
6.1.5
Host Protected Area Command Set
The Intel X18-M/X25-M SATA SSDs support the Host Protected Area command set,
which consists of
• READ NATIVE MAX ADDRESS
• SET MAX ADDRESS
• READ NATIVE MAX ADDRESS EXT
• SET MAX ADDRESS EXT
The Intel X18-M/X25-M SATA SSDs also support the following optional commands:
• SET MAX SET PASSWORD
• SET MAX LOCK
• SET MAX FREEZE LOCK
• SET MAX UNLOCK
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
22
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
6.1.6
48-Bit Address Command Set
The Intel X18-M/X25-M SATA SSDs support the 48-bit Address command set, which
consists of
• FLUSH CACHE EXT
• READ DMA EXT
• READ NATIVE MAX ADDRESS EXT
• READ SECTOR(S) EXT
• READ VERIFY SECTOR(S) EXT
• SET MAX ADDRESS EXT
• WRITE DMA EXT
• WRITE MULTIPLE EXT
• WRITE SECTOR(S) EXT
• WRITE UNCORRECTABLE EXT
6.1.7
Device Configuration Overlay Command Set
The Intel X18-M/X25-M SATA SSDs support the Device Configuration Overlay command
set, which consists of
• DEVICE CONFIGURATION FREEZE LOCK
• DEVICE CONFIGURATION IDENTITY
• DEVICE CONFIGURATION RESTORE
• DEVICE CONFIGURATION SET
6.1.8
General Purpose Log Command Set
The Intel X18-M/X25-M SATA SSDs support the General Purpose Log command set,
which consists of
• READ LOG EXT
• WRITE LOG EXT
6.2
SATA Commands
The SATA 2.6 specification is a super set of the ATA/ATAPI-7 specification with regard to
supported commands. The Intel X18-M/X25-M SATA SSDs support the following
features that are unique to the SATA specification.
6.2.1
Software Settings Preservation
The Intel X18-M/X25-M SATA SSDs support the SET FEATURES parameter to enable/
disable the preservation of software settings.
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
23
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
6.2.2
Native Command Queuing
The Intel X18-M/X25-M SATA SSDs support the Native Command Queuing (NCQ)
command set, which includes
• READ FPDMA QUEUED
• WRITE FPDMA QUEUED
Note:
6.2.3
With a maximum queue depth equal to 32.
Device Initiated Power Management (DIPM)
The Intel X18-M/X25-M SATA SSDs support the SET FEATURES parameter to enable
Device Initiated Power Management.
7.0
References
This document references standards defined by a variety of organizations. Use the
following list to identify the location of an organization’s standards information.
Table 16.
Standards References
Date or
Rev. #
Title
Location
June 2009
Halogen Free
(Applies to halogenated flame retardants and PVC
in components)
Search for material description datasheet at http://
intel.pcnalert.com
Dec 2008
VCCI
http://www.vcci.or.jp/vcci_e/general/join/index.html
June 2009
RoHS
Search for material description datasheet at http://
intel.pcnalert.com
July 2007
SFF-8144, 1.8” drive form factor
http://www.sffcommittee.org
June 2007
Intel Rapid Storage Technology
http://support.intel.com/support/chipsets/imsm/
February 2007
Serial ATA Revision 2.6
http://www.sata-io.org
May 2006
SFF-8223, 2.5" Drive w/Serial Attachment
Connector
http://www.sffcommittee.org
May 2005
SFF-8201, 2.5” drive form factor
http://www.sffcommittee.org
April 2004
ATA-6 spec
http://www.t13.org/project/d1410r3b-ATA-ATAPI-6.pdf
April 2004
ATA-7 Volume 1
http://www.t13.org/Documents/UploadedDocuments/
docs2007/D1532v1r4bAT_Attachment_with_Packet_Interface__7_Volume_1.pdf
International Electrotechnical Commission
EN 61000
4-2
(Personnel Electrostatic Discharge
Immunity)
4-3
(Electromagnetic compatibility (EMC))
4-4
(Electromagnetic compatibility (EMC))
4-5
(Electromagnetic compatibility (EMC))
4-6
(Electromagnetic compatibility (EMC))
4-11 (Voltage Variations)
http://www.iec.ch
1995
1996
1995
1995
1997
1994
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
24
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 16.
Standards References (Continued)
Date or
Rev. #
1995
8.0
Title
Location
ENV 50204
(Radiated electromagnetic field from digital radio
telephones)
http://www.iec.ch
Terms and Acronyms
This document incorporates many industry- and device-specific words. Use the
following list to define a variety of terms and acronyms.
Table 17.
Glossary of Terms and Acronyms
Term
ATA
Definition
Advanced Technology Attachment
ATAPI
Advanced Technology Attachment Packet Interface
BER
Bit error rate, or percentage of bits that have errors relative to the total number of bits
received
BIOS
Basic Input / Output System
Chipset
A term used to define a collection of integrated components required to make a PC
function.
Device Initiated Link Power
Management (DIPM)
The ability of the device to request SATA link power state changes.
DIPM
Device Initiated Power Management (SATA hard disk drive)
DMA
Direct Memory Access
DRAM
Dynamic Random Access Memory
EXT
Extended
FP
First Party
GB
Giga-byte defined as 1x109 bytes. The total usable capacity of the Intel SSD may be less
than the total physical capacity of the Intel SSD. This is due to the fact that a small portion
of the Intel SSD capacity is used for NAND flash management and maintenance purposes.
HCI
Host Controller Interface
HCT
Hardware Compatibility Test
HDD
Hard Disk Drive
Host Initiated Link Power
Management
The ability of the host to request SATA link power state changes.
Hot Plug
A term used to describe the removal or insertion of a SATA hard drive when the system is
powered on.
IDEMA
International Disk Drive Equipment and Materials Association
IOPS
Input/output Operations Per Second
IMSM
Intel Matrix Storage Manager
LBA
Logical Block Address
LPM
Link Power Management: the ability of the SATA link layer to enter one of two lower power
consuming states, partial and slumber
July 2009
Order Number: 322296-001US
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
25
Intel® X18-M/X25-M SATA SSD - 34 nm Product Line
Table 17.
Glossary of Terms and Acronyms (Continued)
Term
Definition
1x106
MB
Mega-bytes defined as
MP
Multi-Processor
bytes
MTBF
Mean time between failure
Native Command Queuing (NCQ)
The ability of the SATA hard drive to re-order commands in order to maximize the
efficiency of gathering data from the platters.
NOP
No Operation
NTFS
NT File System
OEM
Original Equipment Manufacturer
OS
Operating System
Port
The point at which a SATA drive physically connects to the SATA controller.
RAID
Redundant Array of Independent Disks
RMS
Root Mean Squared
RPM
Revolutions Per Minute
RTM
Release To Manufacture
SATA
Serial ATA
SFF
Small Form Factor
S.M.A.R.T.
Self-Monitoring, Analysis and Reporting Technology: an open standard for developing hard
drives and software systems that automatically monitors a hard drive’s health and reports
potential problems.
SSD
Solid State Drive
TBD
To Be Determined
VCCI
Voluntary Control Council for Interface
WHQL
Microsoft* Windows Hardware Quality Labs
Write Cache
A memory device within a hard drive, which is allocated for the temporary storage of data
before that data is copied to its permanent storage location.
9.0
Revision History
Date
Revision
July 2009
001
Description
Initial release.
Intel® X18-M/X25-M SATA Solid State Drive - 34 nm Product Line
Product Manual
26
July 2009
Order Number: 322296-001US
Download PDF
Similar pages