commercial thermostat submittal data

COMMERCIAL
THERMOSTAT
SUBMITTAL DATA
ENGLISH LANGUAGE/I-P UNITS
SUBMITTAL DATA
Unit Designation:
Job Name:
Architect:
Engineer:
Contractor:
Rev.: 26 March, 2014
ClimateMaster works continually to improve its products. As a result, the design and specifications of each
product at the time of order may be changed without notice and may not be as described herein. Please contact
ClimateMaster's Customer Service Department at 1-405-745-6000 for specific information on the current design and
specifications. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely ClimateMaster's opinion or commendation of its products.
The latest version of this document is available at climatemaster.com.
*LC204*
LC204
Rev.: 26 March, 2014
Thermostat Submittal Data
Eng/I-P
Table of Contents
ATA11U01 . . . . .
ATA11U03 . . . . .
ATA22U01 . . . . .
ATC32U02C . . . .
ATP21U01 . . . . .
ATP32U03 . . . . .
ATP32U04 . . . . .
AST008C . . . . . .
Revision History
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
*Page Number
. . . . . . . . . .3
. . . . . . . . . .4
. . . . . . . . . .5
. . . . . . . . 6-7
. . . . . . . . . .8
. . . . . . . 9-10
. . . . . . 11-12
. . . . . . . . . 13
. . . . . . . . . 16
*Document page number is shown next to part number (e.g. LC204 - 3 = page 3). Since not all pages are typically
used in the submittals process, the page number in the lower right corner can still be used (page ____of_____).
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 2
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATA11U01
One Heat / One Cool
Auto / Manual Changeover
Non-Programmable
4.55 in
[115.6mm]
Fan: Turns
continuous
fan OFF or
ON
Fault Light
Temperature
increase
3.30 in
[83.8mm]
Temperature
decrease
Features (cont.):
• Extended fan operation feature can be used to
operate fan for 90 seconds after “Y” turns off.
• Setup feature allows either “current room temp” or
the “current setpoint” to be displayed.
• Optional safety setpoints ensure that heating and
cooling will occur even if thermostat is in “Off” mode.
• Backplate wiring for easy installation.
Specifications:
Electrical Rating:
• Input Power: 18 to 30 Vac, 50/60 Hz.
Mode: Selects system mode OFF, HEAT, COOL, or AUTO
0.8 in Depth
(20.3mm)
• Setpoint Range: 50°F to 90°F [10°C to 32°C].
• The default setpoint for heating is 70°F [21°C] and
for cooling is 74°F [23°C]. Press the ▲ or ▼ keys to
change the setting. To change between heat and cool
settings, press the mode key until the setting to be
changed appears.
Mounting:
1.587in
(40.3mm)
Temperature Settings:
2.375in
(60.3mm)
Display Range:
• Display Updates: Updated every 12 seconds.
• Differential (autochangeover model): 3°F [1.5°C]
minimum.
Output Ratings:
2.625in
(66.7mm)
• Maximum current for each output is 1 Amp.
3.275in
(83.2mm)
Wiring:
Application:
The ATA11U01 electronic thermostat provides singlestage, non-programmable temperature control for 24V
water-source heat pump systems.
Features:
•
•
•
•
•
•
•
•
•
Heat-Off-Cool-Auto System selections.
Fan-On-Auto selections.
°F or °C temperature display.
Configurable automatic or manual changeover
operation.
Light emitting diode (LED) for alarm status.
Installer setup options allow for customized
applications.
Zero temperature droop performance.
Temperature display adjustment feature provides
display offset for custom applications.
Setpoints are permanently held in memory (no
batteries used) and retained during power outages.
Connection to CXM Control
ATA11U01 Thermostat
CXM
Compressor
Y
Y
Reversing Valve
Fan
24Vac Hot
O
O
G
G
R
R
24Vac Common
Fault LED
C
C
L
AL1
Connection to DXM Control
ATA11U01 Thermostat
DXM
Compressor
Y
Y1
Reversing Valve
Fan
24Vac Hot
O
O/W2
G
24Vac Common
Fault LED
C
L
G
R
R
C
AL1
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 3
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATA11U03
5.12 in
[130 mm]
Mode: Selects system mode OFF, HEAT, COOL, or AUTO
Temperature
increase / decrease
One Heat / One Cool
Auto / Manual Changeover
Non-Programmable
Features (cont.):
• Installer setup options allow for customized
applications, including dead band adjustment,
temperature display offset, manual heat-cool only,
keypad lockout, sensing on board or remote,
maximum cycles per hour, fan speeds (2 or 1), setting
minimum cooling temperature, and setting maximum
heating temperature.
• Zero temperature droop performance.
• Setpoints are permanently held in memory (no
batteries used) and retained during power outages.
• Backplate wiring for easy installation.
4.12 in
[105 mm]
1.12 in Depth
(28 mm)
Fan: Selects continuous fan OFF or
ON and High Speed or Low Speed
Specifications:
Electrical Rating:
• Input Power: 18 to 30 Vac, 50/60 Hz.
Temperature Settings:
Back Plate:
• Setpoint Range: 50°F to 90°F [10°C to 32°C].
• The default setpoint for heating is 68°F [20°C] and
for cooling is 78°F [25.5°C]. Press the ▲ or ▼ keys
to change the setting. To change between heat,
cool, and auto settings, press the mode key until the
desired setting appears.
Mounting
Holes
3.56 in
[90 mm]
2.88 in
[73 mm]
Output Ratings:
• Maximum current for each output is 1 Amp, 3 Amp total.
Wiring:
HEAT PUMP
CXM/DXM
THERMOSTAT
.50 in
[13 mm]
Rc
R
3.25 in
[83 mm]
Rh
4.40 in
[118 mm]
W
W OR W1
C
C
G
G2
Application:
The ATA11U03 electronic thermostat provides single-stage,
2 fan speed selections, non-programmable temperature
control for 24 Vac water-source heat pump systems.
S2
S1
O
Y1
G
NOTE 1
H (DXM ONLY)
NOTE 2
O
Y or Y1
Features:
•
•
•
•
•
Heat-Off-Cool-Auto System selections.
Fan Low or High selections.
Fan-On-Auto selections.
°F or °C temperature display.
Backlight user select.
1. For units using only 1 speed (see unit wire diagram.) Must
add jumper on thermostat between G and G2, or configure
thermostat for 1 speed (G only).
2. For optional remote sensor, configure thermostat remote
sensing, use ASW06 (wall sensor) or 17B0008N05 (duct sensor).
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 4
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATA22U01
Fan: turns
continuous fan
OFF or ON
4.55 in
[115.6mm]
Fault Light
Temperature
increase /
decrease
3.30 in
[83.8mm]
0.8 in Depth
[20.3mm]
Mode: Selects system mode OFF, HEAT, COOL, EMHEAT,
or AUTO
Mounting:
Two Heat / Two Cool
Manual / Auto Changeover
Non-Programmable
Features (cont.):
• Extended fan operation feature can be used to
operate fan for 90 seconds after “Y” turns off.
• Setup feature allows either “current room temp” or
the “current setpoint” to be displayed.
• Optional safety setpoints ensure that heating and
cooling will occur even if thermostat is in “Off” mode.
• Backplate wiring for easy installation.
• Automatic fan staging (when used with DXM board
and direct drive motor).
Specifications:
Electrical Rating:
• Input Power: 18 to 30 Vac, 50/60 Hz.
Temperature Settings:
• Setpoint Range: 50°F to 90°F [10°C to 32°C].
• The default setpoint for heating is 70°F [21°C] and for
cooling is 74°F [23°C]. Press the▲ or ▼ keys to change
the setting. To change between heat and
cool settings, press the mode key until the setting to
be changed appears.
Display Range:
• Display Updates: Updated every 12 seconds.
• Differential (autochangeover model): 3°F [1.5°C]
minimum.
Output Ratings:
• Maximum current for each output is 1 Amp.
Wiring:
&RQQHFWLRQWR&;0&RQWURO
Application:
The ATA22U01 electronic thermostat provides two-stage,
non-programmable temperature control for 24V watersource heat pump systems.
Features:
•
•
•
•
•
•
•
•
•
&;0
$7$87KHUPRVWDW
Heat-Off-Cool-Em Heat-Auto System selections.
Fan-On-Auto selections.
°F or °C temperature display.
Configurable automatic or manual changeover
operation.
Light emitting diode (LED) for alarm status.
Installer setup options allow for customized
applications.
Zero temperature droop performance.
Temperature display adjustment feature provides
display offset for custom applications.
Setpoints are permanently held in memory (no
batteries used) and retained during power outages.
&RPSUHVVRU
+HDWLQJ6WDJH
5HYHUVLQJ9DOYH
)DQ
9DF+RW
9DF&RPPRQ
)DXOW/('
<
<
<
<
2
2
*
*
5
5
&
&
/
$/
&RQQHFWLRQWR';0&RQWURO
$7$87KHUPRVWDW
<
&RPSUHVVRU
&RPSUHVVRU6WDJH <:
RU+HDWLQJ6WDJH
5HYHUVLQJ9DOYH
)DQ
9DF+RW
9DF&RPPRQ
)DXOW/('
2
*
5
&
/
';0
1RWH
<
<
:
2:
*
5
&
$/
Note 2: Connect "W/Y2" thermostat output to "Y2" on the DXM if thermostat "Y2" option i V
configured as "Y2 - On" and the desired operation is for 2 stages of compressor with no
electric heat. Connect "W/Y2" thermostat output to "W1" on the DXM if thermostat "Y2"
option is configured as "Y2 - Of f" and the desired operation is for 1 stage of compressor
with electric heat for Heating Stage 2.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 5
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATC32U02C
Communicating, Three Heat / Two Cool,
Auto / Manual Changeover
Programmable (7 Day) - With Humidity Control
6.25”
[159mm]
Features (cont.):
4.25”
[108mm]
1.25” Depth
[32mm]
Back Plate:
UP
C
R
-
A+
3.12"
[80mm]
BGND
1.50"
[38mm]
3.25"
[83mm]
OD
ID
GND
3.00"
[76mm]
2.12"
[54mm]
0.62"
[16mm]
Application:
The ATC32U02C iGate™ Communicating Programmable
Thermostat provides 3 stages heating, 2 stages of
cooling, programmable temperature/humidity control of
24V water-source heat pump equipment with DXM2 will
communicate with heat pump to maximize comfort and
reduce energy doing so.
• Integrated control eliminates separate thermostat and
dehumidistat/humidistat
• Thermostat can be programmed to use humidification
output to control a humidifier
• Night Setback mode initiated by an external signal
• Four periods per day
• ºF or ºC temperature display
• 12 or 24 hour clock
• Individual heat and cool setpoints
• Zero temperature droop performance
• Automatic (program mode) or manual (HOLD) operation
• 7-day programming.
• Convenient overrides allow temporary setpoint changes
• Setpoints are permanently held in memory (no batteries
used) and retained during power outages
• Room temperature offset adjustment
• Progressive Recovery anticipates the time required to
bring the space temperature to the next programmed
event, and brings on the heat pump accordingly
• Large backlit dot matrix display is activated whenever a
key is pressed and remains on for 25 seconds
• Menu-driven programming with five navigation buttons
(UP/DOWN/LEFT/RIGHT/SELECT) for ease of use
• Fault indication with red backlight display
• Configurable service interval messages and servicing
contractor contact information
• Keypad lockout
• Simple four wire connection
• Back-plate wiring connections for easy installation
• Exclusive service screens that display conditions when
fault occurred, last 5 faults, and list of possible causes
• Compatible with optional AST008C sensor for use
as remote and/or outdoor sensor, or for indoor wall
mounted sensor use ASW06.
Specifications:
Electrical Rating:
• Input Power: 18 to 30 VAC, 50/60 Hz
Features:
• With DXM2 can set ECM motor CFM from minimum
to maximum by 25 CFMs; can view 6 unit sensors Entering water, Leaving water, Supply Air, Discharge
line, entering and leaving TXV temperatures; check
inputs and see dip switch configurations.
• Dehumidification output is designed to work with
Whole House Dehumidification Modulating Reheat
option or with ECM fan motor dehumidification mode
• Integrated control of both temperature and relative
humidity
Operating Conditions:
• 32ºF to 104ºF [0ºC to 40ºC]
• 10% to 95% non-condensing
Temperature Settings:
• Setpoint range: 55ºF to 95ºF [12ºC to 35ºC], +/- 2ºF [1ºC]
• Dehumidification setpoint range: 15% to 95% RH
• Humidification setpoint range: 10% to 45% RH
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 6
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATC32U02C
Wiring:
ATC32U Thermostat
24 Vac Common
Common +
Common -
C
24 Vac Hot
R
DXM2
GND
A+
B24V
P4
A+
B-
Field Wiring
Factory Wiring
See equipment wiring diagram for more details
Optional Wiring for ASW06
Optional Wiring for AST008C
ATP
ATP
–
–
–
GND
–
GND
(Locate
Indoor)
OD
ID
GND
GND TEMP SW LED
ASW06
OD
(Locate
Outdoor)
AST008C
ID
AST008C
(Indoor Wall Sensor)
GND
Note: AST or ASW can be mounted up to 200 feet from thermostat - use minimum two-conductor 22AWG thermostat
wire. Follow all NEC and local electrical codes.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 7
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATP21U01
Fan: sets fan
to continuous
ON or AUTO
4.55 in
[115.6mm]
Temperature
increase /
decrease
Two Heat / One Cool
Manual Changeover
Programmable
Features (cont.):
• Zero temperature droop performance.
• Manual changeover.
• Convenient overrides allow temporary setpoint
changes.
• Setpoints are permanently held in memory (no
batteries used) and retained during power outages.
• Room temperature offset adjustment.
• Back-plate wiring connections for easy installation.
3.30 in
[83.8mm]
Specifications:
Mode: Selects system
mode - OFF, HEAT,
COOL, EMHEAT
0.8 in Depth
[20.3mm]
Programming Keys
Electrical Rating:
• Input Power: 18 to 30 VAC, 50/60 Hz
Temperature Settings:
• Setpoint range: 50ºF to 90ºF [10ºC to 32ºC]
• Press the ▲ or ▼ keys to change the temperature
setting. The MODE, PROGRAM and HOLD keys
allow changes to the program and schedule.
Mounting:
1.20"
[30.5mm]
Output Ratings:
[5 2.
9. 35
7m "
m
]
• Maximum current for each output is 1 Amp.
UP
Wiring:
Connection to CXM Control
ATP21U01 Thermostat
0.65"
[16.5mm]
CXM
Compressor
Y1
Y
Reversing Valve
Fan
24Vac Hot
24Vac Common
O
O
G
G
R
R
C
C
3.30"
[83.8mm]
Connection to DXM Control
ATP21U01 Thermostat
Application:
The ATP21U01 Thermostat provides 2 stages heating,
1 stage cooling, and programmable temperature
control of 24V water-source heat pump equipment.
Programming schedule includes one schedule for the
five week days, one schedule for the two weekend days
and four periods per day (5/2/4).
DXM
Compressor
Y1
Y1
Reversing Valve
Fan
24Vac Hot
24Vac Common
O
O/W2
G
R
C
G
R
C
Features:
•
•
•
•
5-day/2-day programming.
Four periods per day.
ºF or ºC temperature display.
Individual heat and cool setpoints.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 8
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATP32U03
Three Heat / Two Cool
Manual / Auto Changeover
Programmable (7 Day)
6.25”
[159mm]
Features (cont.):
• Setpoints are permanently held in memory (no
batteries used) and retained during power outages.
• Room temperature offset adjustment.
• Progressive Recovery anticipates the time required to
bring the space temperature to the next programmed
event, and brings on the heat pump accordingly.
• Large backlit dot matrix display is activated whenever
a key is pressed and remains on for 25 seconds.
• Menu-driven programming with five navigation buttons
(UP/DOWN/LEFT/RIGHT/SELECT) for ease of use.
• Fault indication with red backlight display.
• Configurable service interval messages and servicing
contractor contact information.
• Keypad lockout.
• Back-plate wiring connections for easy installation.
• Exclusive fault identification (When used with CXM
or DXM) displays fault from CXM/DXM board (e.g.
condensate overflow) and suggests possible causes.
• Compatible with optional AST008C sensor for use
as remote and/or outdoor sensor, for indoor wallmounted remote sensor use ASW06.
• Automatic fan staging (when used with DXM board
and direct drive motor).
4.25”
[108mm]
1.25” Depth
[32mm]
Mounting:
UP
3.12"
[80mm]
Specifications:
1.50"
[38mm]
3.25"
[83mm]
Electrical Rating:
3.00"
[76mm]
• Input Power: 18 to 30 VAC, 50/60 Hz.
2.12"
[54mm]
Operating Conditions:
• 32ºF to 104ºF [0ºC to 40ºC].
• 10% to 95% non-condensing.
0.62"
[16mm]
Temperature Settings:
Application:
The ATP32U03 Thermostat provides 3 stages heating,
2 stages of cooling, and programmable temperature
control of 24V water-source heat pump equipment.
Features:
• Setpoint range: 55ºF to 95ºF [12ºC to 35ºC], +/- 2ºF [1ºC].
Output Ratings:
• Maximum current for each output is 1.0 Amp (2.0 max.
output total).
•
•
•
•
•
•
•
7-day programming.
Four periods per day.
ºF or ºC temperature display
12 or 24 hour clock.
Individual heat and cool setpoints.
Zero temperature droop performance.
Automatic (program mode) or manual
(HOLD) operation.
• Night Setback mode initiated by an external signal
(when using a DXM controller).
• Convenient overrides allow temporary setpoint changes.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 9
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATP32U03
Wiring:
Three Heat / Two Cool
Manual / Auto Changeover
Programmable (7 Day)
Single Stage Units
Connection to CXM Control
ATP32U03 Thermostat
P1
CXM
Compressor
Y1
Y
Reversing Valve
Fan
24Vac Hot
24Vac Common
Fault LED
O
G
R
C
L
O
G
R
C
AL1
Units With ECM Fan
Connection to ECM Control
ATP32U03 Thermostat
Compressor
Compressor Stage 2
Reversing Valve
Fan
24Vac Hot
24Vac Common
Fault LED
Connection to DXM Control
ATP32U03 Thermostat
P1
Compressor
Y1
Y2
Reversing Valve
Fan
24Vac Hot
24Vac Common
Fault LED
O
G
R
C
L
Note 1
DXM
Y1
Y2
ECM
Y1
Y2
O
G
R
C
AL1
Y1
Y2
O
G
R
C
L
Units with CXM or DXM board and ECM fan motor
O/W2
G
R
C
AL1
Two Stage Units
Connection to CXM Control
ATP32U03 Thermostat
Single stage unit with PSC or belt drive fan motor
Note 1: Y2 may be used for High Speed fan for units with direct drive motor
Compressor
Compressor Stage 2
Reversing Valve
Fan
24Vac Hot
24Vac Common
Fault LED
Optional Wiring for ASW06
ATP
CXM 1
Y
P1
CXM 2
O
G
R
C
AL1
Y
O
G
R
C
AL1
Two compressor unit with CXM boards
–
Connection to DXM Control
–
GND
ATP32U03 Thermostat
OD
ID
GND TEMP SW LED
GND
ASW06
(Indoor Wall Sensor)
P1
–
GND
OD
P1
DXM 2
Y1
Y2
Y1
Y2
Y1
Y2
Reversing Valve
Fan
24Vac Hot
24Vac Common
Fault LED
O
G
R
C
L
O/W2
G
R
C
AL1
O/W
G
R
C
AL1
ATP
–
DXM 1
Compressor
Compressor Stage 2
Two compressor unit with DXM boards
Optional Wiring for AST008C
(Locate
Indoor)
P1
Y1
Y2
O
G
R
C
L
COM 1
COM 1
S
C
S
C
(Locate
Outdoor)
Field Wiring
AST008C
Factory Wiring
ID
AST008C
See equipment wiring diagrams
for more details.
GND
Note: AST or ASW can be mounted up to 200 feet
from thermostat - use minimum two-conductor 22AWG
thermostat wire. Follow all NEC and local electrical codes.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 10
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATP32U04
Three Heat / Two Cool,
Auto / Manual Changeover
Programmable (7 Day) - With Humidity Control
Features (cont.):
6.25”
[159mm]
•
•
•
•
•
•
•
•
•
4.25”
[108mm]
•
•
1.25” Depth
[32mm]
•
Mounting:
•
UP
•
•
•
•
•
3.12"
[80mm]
1.50"
[38mm]
3.25"
[83mm]
3.00"
[76mm]
•
2.12"
[54mm]
0.62"
[16mm]
Four periods per day
ºF or ºC temperature display
12 or 24 hour clock
Individual heat and cool setpoints
Zero temperature droop performance
Automatic (program mode) or manual (HOLD) operation
7-day programming.
Convenient overrides allow temporary setpoint changes
Setpoints are permanently held in memory (no batteries
used) and retained during power outages
Room temperature offset adjustment
Progressive Recovery anticipates the time required to
bring the space temperature to the next programmed
event, and brings on the heat pump accordingly
Large backlit dot matrix display is activated whenever a
key is pressed and remains on for 25 seconds
Menu-driven programming with five navigation buttons
(UP/DOWN/LEFT/RIGHT/SELECT) for ease of use
Fault indication with red backlight display
Configurable service interval messages and servicing
contractor contact information
Keypad lockout
Back-plate wiring connections for easy installation
Exclusive fault identification (When used with CXM
or DXM) displays fault from CXM/DXM board (e.g.
condensate overflow) and suggests possible causes
Compatible with optional AST008C sensor for use
as remote and/or outdoor sensor, or for indoor wall
mounted sensor use ASW06.
Specifications:
Electrical Rating:
Application:
The ATP32U04 Thermostat provides 3 stages heating,
2 stages of cooling, and programmable temperature/
humidity control of 24V water-source heat pump
equipment.
• Input Power: 18 to 30 VAC, 50/60 Hz
Operating Conditions:
• 32ºF to 104ºF [0ºC to 40ºC]
• 10% to 95% non-condensing
Temperature Settings:
Features:
• Dehumidification output is designed to work with
Whole House Dehumidification Modulating Reheat
option or with ECM fan motor dehumidification mode
• Integrated control of both temperature and relative
humidity
• Integrated control eliminates separate thermostat and
dehumidistat/humidistat
• Thermostat can be programmed to use humidification
output to control a humidifier
• Night Setback mode initiated by an external signal
(when using a DXM controller).
• Setpoint range: 55ºF to 95ºF [12ºC to 35ºC], +/- 2ºF [1ºC]
• Dehumidification setpoint range: 15% to 95% RH
• Humidification setpoint range: 10% to 45% RH
Output Ratings:
• Maximum current for each output is 1.0 Amp (2.0 max.
output total).
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 11
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
ATP32U04
Wiring:
Units with ClimaDry Reheat
Connection to DXM Control (PSC Fan)
ATP32U04 Thermostat
P1
DXM
Compressor
Y1
Y1
Dehumidification
Reversing Valve
DH
H
O
O/W2
Fan
G
G
24Vac Hot
24Vac Common
R
R
C
C
Fault LED
L
AL1
W
Electric Heat
W1
Single stage unit with ClimaDry Modulating Reheat Option and PSC fan
Connection to DXM Control
ATP32U04 Thermostat
P1
Y1
Compressor
Compressor Stage 2
Dehumidification
Y2
Reversing Valve
Fan
24Vac Hot
O
24Vac Common
Fault LED
Electric Heat
C
L
W1
DXM
Y1
Y2
H
DH
O/W2
G
R
G
R
Three Heat / Two Cool
Auto / Manual Changeover
Programmable (7 Day)
With Humidity Control
Units with ECM Fan
Connection to ECM Control
ATP32U04 Thermostat
Compressor
Compressor Stage 2
Y1
Dehumidification
DH
Reversing Valve
Fan
O
24Vac Hot
24Vac Common
Fault LED
R
Electric Heat
ECM
Y1
Y2
Y2
DH
O
G
R
C
G
C
L
W1
AL1
W
Units with CXM or DXM board and ECM fan motor, utilizing
ECM dehumidification mode (w/o ClimaDry option)
Notes:
1) ECM dehumidification mode slows down fan speed in the
cooling mode when dehumidification output from thermostat is
active. Normal heating and cooling fan speeds are not
affected.
2) ECM board DIP switch SW9 must be in dehumid. mode.
C
AL1
W
Two-stage unit with ClimaDry Modulating
Reheat Option and DXM board
Field Wiring
Factory Wiring
See equipment wiring diagram for more details
Optional Wiring for ASW06
Optional Wiring for AST008C
ATP
ATP
–
–
–
GND
–
GND
(Locate
Indoor)
OD
ID
GND
GND TEMP SW LED
ASW06
OD
(Locate
Outdoor)
AST008C
ID
AST008C
(Indoor Wall Sensor)
GND
Note: AST or ASW can be mounted up to 200 feet from thermostat - use minimum two-conductor 22AWG thermostat
wire. Follow all NEC and local electrical codes.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 12
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
AST008C
Remote/Outdoor Temperature Sensor
Specifications:
• Two-wire connection to thermostat, extendable with
two-conductor 22 AWG thermostat wire up to 200 feet.
• Mounting clip included
Wiring:
ATP32U0_
Thermostat
Terminal Block
–
Position
Sensor
Outdoor
–
GND
OD
AST008C
ID
Application:
The AST008C sensor is a thermistor, used as an accessory
for thermostat models ATP32U03C and ATP32U04C. This
sensor provides outdoor air temperature information for
the control system, as well as an indication of outdoor
temperature on the display screen. The AST008C sensor
can also be used as a remote indoor sensor. Two sensors
may be used--one for remote indoor temperature
sensing, and one for outdoor temperature sensing. When
the sensor is used as a remote indoor temperature sensor,
the internal sensor of the thermostat becomes inactive.
(No thermostat reconfiguration required).
AST008C
GND
Position
Sensor
Indoor
(i.e. in return
air duct)
Features:
• Designed for indoor or outdoor installation.
• May be used as indoor remote temperature sensor or
as outdoor temperature sensor.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 13
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
Notes
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 14
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
Notes
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 15
Rev.: 26 March, 2014
Page ______ of ______
Thermostat Submittal Data
Eng/I-P
Revision History
Date:
Item:
Action:
03/26/14
ATC32U02C
Added
Updated
12/11/13
ATA11U01
02/28/13
AST008C
Updated
02/25/13
ATA11U03
Added
11/26/12
ATA11C04 and AST009
Removed
02/16/12
ATA11C06
Removed
01/26/12
ATP32, ATP21, AST008C, AST009
Updated
04/26/11
ATP32U03 & ATP32U04 Featuresp
Updated
01/03/11
Format - All Pages
Updated
09/01/10
ATP32U03 & ATP32U04
Temperature Settings Updated
06/11/10
Format - All Pages
Updated
07/06/09
ATP11N01
Removed
05/21/09
ATM11C04
Removed
05/11/09
ATP32U04
Information and Pictorials Added to Page 12
05/11/09
ATR11C01, ATT11C01 Page
Removed
05/11/09
ATP31U02
Changed to ATP31U04
05/11/09
ATP31U01
Changed to ATP31U03
10/31/08
ATM11C04
Added
09/16/08
ATP32UO2
Updated Wiring Controls
07/31/08
ATR11C01, ATT11C01
Information Added
07/23/08
ATA11C03, ATA11C04
Note 3 Added
05/01/08
ATP11C
Updated Verbage and Changed Pictures
10/18/07
ATP32U01
Added 2 DXM wiring diagram
10/18/07
ATP21U01
Removed “Auto” mode notation
10/18/07
ATM11C11
Added model
03/31/06
AST008C
Added AST008C outdoor/remote sensor
02/23/06
First Published
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC204 - 16
Rev.: 26 March, 2014
Page ______ of ______
Download PDF
Similar pages