High Resolution IR Dome Camera

High Resolution IR
Dome Camera
User Manual
SCD-2022R
SCD-2042R
␃
㢜
■
■
High Resolution IR Dome Camera
User Manual
Copyright
© Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.
Warranty
If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve
the problem for free of charge. The warranty period is 3 years. However, the followings are excluded:
• If the system behaves abnormally because you run a program irrelevant to the system operation.
• Deteriorated performance or natural worn-out in process of time
™ Design and specifications are subject to change without prior notice.
⏥
Before operating the camera, confirm the camera model and correct input power voltage.
To help you understand this manual thoroughly, we’ll introduce our model description.
■ SCD-2022R/2042R SERIES
• NTSC MODEL
SCD-2022RN SCD-2042RN
• PAL MODEL
SCD-2022RP SCD-2042RP
• POWER SOURCE
SCD-2022RN / SCD-2022RP : DC12V
SCD-2042RN / SCD-2042RP : DC12V
Safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.
This exclamation point symbol is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
WARNING
• To prevent damage which may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance
with the installation instructions.
8
9
1
ᔔ
1
2
3
4
5
6
7
WARNING
8
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
9
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
1
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. insecure connection may cause
fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.
4_ Safety information
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers
filled with water on top of the camera. doing so may cause personal injury due to fire,
electric shock, or falling objects.
8. If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never
disassemble or modify this product in any way. (samsung is not liable for problems caused
by unauthorized modifications or attempted repair.)
10. When cleaning, do not spray water directly onto parts of the product. doing so may cause
fire or electric shock.
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature (over 55°C), low temperature (below
-10°C), or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this
may damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time.
10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.
English_5
● SAFETY INFORMATION
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or
electric shock.
Safety information
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
㺺
1
2
3
4
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
5
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
6
Correct disposal of batteries in this product
7
(Applicable in the European Union and other European countries with separate battery return systems.)
8
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
9
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
1
1
1
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to provide
customers with more environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly products, and indicates
that the product satisfies the EU RoHS Directive.
6_ Safety information
1
1
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus
15.This product is intended to be supplied by a Listed Power Supply Unit marked "Class2"
and rated from 12VDC, min.0.3A .
English_7
● SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13. Unplug this apparatus when a card is used. Use caution when moving the
cart/ apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
1.
2.
3.
4.
5.
6.
7.
⮈
Contents
INTRODUCTION
9
9
10
11
Features
What’s included
Component names and Functions
12
12
14
Before Installation
Installation
Adjust the panning and tilting
rotating while watching the monitor
15
15
16
Connecting to Monitor
Connecting to Power
Using coaxial communications
ᄔ
y
y
INSTALLATION
12
y
y
CONNECTION
15
y
y
SETUP
18
TROUBLESHOOTING
27
8_ Contents
18
18
Menu Configration
Menu Setup
27
Troubleshooting
y
y
y
y
SPECIFICATIONS
28
Specifications
28
32
Dimension
y
Introduction
FEATURES
 excellent sensitivity
The built-in high sensitivity COLOR CCD produces a clear image.
 high Resolution
By adopting a diagonal 6mm (1/3”) 520,000 pixel (NTSC), 610,000 pixel (PAL)
SONY CCD, the camera produces clear picture quality with a horizontal resolution
of 700TV lines in ER mode and 700TV lines for BW .
● INTRODUCTION
Color : 0.15Lux (50IRE@F1.2), 0.0002 Lux (50IRE@F1.2,Sens-up, 512x)
B/W : 0 LUX ( IR LED On)
 6615 (samsung super Noise Reduction) function
The high-performance W6 DSP chip effectively removes low-light gain noise and
afterimage to provide clear images even in dark environments.
 day & Night
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime
conditions to provide optimum colors, and B/W mode operates in night-time conditions
to enhance the definition of the image.
 defog
The camera is able to recognize the concerntration of fog in the image, and automatically
defog, correct image of the bad weather such as fog, rain, mist, fumes, etc to make it clear.
 ssdR (samsung super dynamic Range)
For images with high contrast between bright and dark areas from difficult lighting
conditions such as backlighting, this camera selectively illuminates darker areas while
retaining the same light level for brighter areas to even out the overall brightness.
 miscellaneous functions
HLC(High Light Compensation),SENS-UP, H-REVERSE , SHARPNESS, PRIVACY
and MOTION DET. functions are provided.
 IR mOde function
Adjusting the intensity of IR-LEDs depends upon the closeness of the object,
which in order to prevent saturation.
 Indoor Visibility range 7m
In B/W mode, the IR-LEDs are illuminated, the indoor visibility range at 0 Lux is 7M.
English_9
Introduction
 Communication
Coaxial communication methods are supported.
- Protocol : Pelco Coaxitron
 Osd
The camera control is convenient by using 17 different foreign language O.S.D.
- NTSC : English, Japanese, Spanish, French, Portuguese, Korean
- PAL : English, French, German, Spanish, Italian, Chinese, Russian, Polish,
Czech, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese
ಲ
WHAT’S INCLUDED
Check if the following items are included in the product package.
HighResolutionIR
DomeCamera
Quick Manual
CAMERA
SCD-2022R
SCD-2042R
Quick Manual
Tapping Screw 3EA
Installation Video
Output Cable
* The illustration above may not be exactly same as the real parts, for reference only.
10_ Introduction
y
y
COMPONENT NAMES AND FUNCTIONS
❶
➌
➋
)
DN
)
T_
(EX ND
(G
AY
GR ACK
BL
➐
● INTRODUCTION
❿
❻
➎
➑
➍
➒
❶ Pan Base : Control panning angle of camera.
❷ Tilt Base : Control tilting angle of camera.
❸ Lens Module : SCD-2022R - f=3.8mm, F2.0 (IR LENS)
SCD-2042R - f=8.0mm, F2.0 (IR LENS)
➍ Power input terminal : Connect the Power(DC 12V)
➎ Ground Terminal
➏ D & N Input Terminal : You can switch to Day & Night Mode by connecting an external
signal to this terminal.
➐ Video Output Jack : Video signals are output through this port. Connect this port
to the Video IN port of a monitor.
Display the menu on the screen and move the cursor
to four directions to confirm status or after changing
a selected item.
➒ Video Output Terminal to Monitor
❿ Dome Cover
➑ Function Setup switch :
English_11
Installation
BEFORE INSTALLATION
Before installing your camera, you have to read the following cautions :
• You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
• Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise
it may cause a breakdown or fire.
• Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
• When installing your camera, don’t allow any person to approach the installation site. If you have any
valuable things under the place, move them away.
INSTALLATION
1. Separate the dome cover by turning anti-clockwise and separate the shield case by pulling from
the camera body.
Main Body
(Camera)
Unlocking direction
(Anti-clockwise)
Latch
Locking direction
(Clockwise)
Dome cover
 Theinstallationshouldbedonebyqualified
12_ Installation
Originalpositionof
the cable
Hole
Cover
service personnel or system installers.
 Iftheceilingmaterialisnotstrongenoughto
hold the installation screws, the camera may
falloff.Reinforcetheceilingasneeded.
 To changethepositionof thecable,take
away the Hole Cover and pass the cable
through.
2. Hold the ceiling bracket (located where the arrow points to) and separate it from the main body of
the camera by rotating it anti-clockwise.
3. Place the separated ceiling bracket so that the “Front” side faces the area to be monitored
and install it with the tapping screws.
Ceilingbracket
tapping
screw
tappingscrew
* If you want to install the camera with the ceiling
bracketcombined,fixitusingtwotapping screws
atthesideofthemainbody
4. To combine the main body with the ceiling bracket, make sure that the pan base fixation screw
face the opposite side of the “Front” side of the ceiling bracket and rotate it clockwise.
5. Adjust the camera lens to face the area to be monitored and fix the main body and
the dome cover by aligning the grooves and rotating the body clockwise.
English_13
●INSTALLATION
PanBase
fixation screw
Installation
⻸
Adjust the panning and tilting, rotating while watching the monitior
ಲ
Þ
㎫
Þ
Tilt Base
Pan Base
Þ
y
y
1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
•PanBasemovesby176°toeachsidedirectionand352°onthewhole.
• Tilt Basecovers75˚angle.
2) Methods of adjustment
•The case of wall installation
…
1 After mounting the camera on a wall, adjusting the panning angle so that the camera can
…
…
…
2 Adjust the tilting angle by rotating the tilt base.
3 Tighten the pan base hold screw.
face the direction to monitor when tilted.
•The case of ceiling installation
…
1 After mounting the camera on a ceiling, adjusting the panning angle to the correct viewing
…
…
…
2 Adjust the tilting angle by rotating the tilt base.
3 Tighten the pan base hold screw.
position by rotating the pan base.
14_ Installation
ಲ
6
㎫
※
Connection
CONNeCTING TO mONITOR
Connect the Video Output jack to the VIDEO-IN jack of monitor.
CCTVCamera
 As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
 Only connect the cable when the power is turned off.
CONNeCTING TO pOWeR
Connect the adaptor to the power input connector as shown in the figure below.
The recommended adaptor specification for SCD-2022R/2042R is DC12V/500mA .
---- Power Input Terminal
English_15
●CONNECTION
Monitor
Connection
When the resistance value of copper wire is at [20°C(68°F)]
PP PP PP PP PP PP
Resistance ( Ω /m)
Voltage Drop (V/m)
Copper wire size (AWG)
 As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively
long adaptor output line for connection to the camera may affect the performance of the camera.
* Standard voltage for camera operation :DC 12V ±10%
* There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
 Be sure to connect power only after all the installation is complete.
 Note that DC adaptor is not supplied with camera.
Us ING COA xIAl COmmUNICATIONs
 Coaxial Communications System
 OSD Control method
CAMERA
SET
UP
DOWN
LEFT
RIGHT
16_ Connection
DVR
MENU/ENTER
UP KEY
DOWN KEY
LEFT KEY
RIGHT KEY
CONTROLLER
OSD KEY
JOYSTICK UP
JOYSTICK DOWN
JOYSTICK LEFT
JOYSTICK RIGHT
ಲ
y
y
DVR
ALARM
1
DVD RECORDER
HDD
NETWORK
2
BACKUP
REC
3
REC
4
5
6
7
8
9
10
11
12
13
14
15
16
ZOOM
FREEZE BACKUP SEARCH
TELE
WIDE
VIEW
MODE
AUDIO
ALRAM
OPEN/CLOSE
PRESET
MENU
USB
RETURN
●CONNECTION
MENU
SEARCH
MULTI
REC
MENU
PRESET
CAM
MON
GROUP
PTZ
1
DVR
TRACK
MTX
2
3
6
SETUP
4
7
FUNC
5
8
ESC
9
ENTER
CLOSE
OPEN
0
NEAR
FAR
WIDE
TELE
: BNC
•
• ---- : RS-485
-Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable, shown
below : If the distance between the camera and the monitor exceeds the recommended
maximum, please use an auxiliary video amp.
Distance
Recommended Cable Specification
300m
3C2V(RG-59/U)
450m
5C2V(RG-6/U)
600m
7C2V(RG-11/U)
 It is recommended that pure copper coax cable is used and not copper coated steel, as
this will cause issues with the communication over the coaxial cable.
 To ensure picture quality, only single-channel video output connector can be used while
camera connected to other video equipments.
English_17
Setup
㔤
meNU CONfIGURATION
‫ܓ‬
mAIN seTUp
expOsURe
● BRIGHTNESS
● RETURN
● AGC
● SENS-UP
defOG
● OFF
● AUTO
● MANUAL
WhITe bAl
● ATW
● MANUAL
● OUTDOOR
● AWC→SET
● INDOOR
bACKlIGhT
● OFF
●U
A SER BLC
● HLC
SSNR3
● ON
● OFF
dAy/NIGhT
● AUTO
● B/W
● EXTX ERN
● COLOR
speCIAl
● IMAGE ADJ
● MOTION DET
● SSDR
● CAM TITLE
● SYNC
● RETURN
● PRIVACY
● COAX
exIT
● SAVE
● NOT SAVE
● RESET
‫ܓ‬
meNU seTUp
㖳
Use the Function Setup switch within the camera.
Function Setup switch
1. Press the Function Setup switch.
 Main setup menu is displayed on the monitor screen.
18_ Setup
MAIN SETUP
▶ 1.EXPOSURE
2.DEFOG
3.WHITE BAL
4.BACKLIGHT
5.SSNR3
6.DAY/NIGHT
7.SPECIAL
8.EXIT
OFF
ATW
OFF
ON
AUTO
Change the status
using the Function
Setup switch
left/right.
SAVE
2. Select a desired function using the Function Setup switch.
 Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
 An item with the
icon also has sub menus. To select a sub menu, select an
item with the icon and press the Function Setup switch.
 An item with the icon is unavailable due to function settings.
expOsURe
1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup
switch so that the arrow indicates 'EXPOSURE'.
EXPOSURE SETUP
2. Select a desired mode using the Function Setup
switch.
 1. BRIGHTNESS IIIIIIIII*IIIIIIII 10
HIGH
2. AGC
 BRIGHTNESS : Adjusts the video brightness.
3.SENS-UP
AUTO
 AGC (AUTO GAIN CONTROL)( OFF/ LOW / MID /
4.
RETURN
HIGH ): The higher the gain level, the brighter the
screen but the higher the noise.
 SENS-UP : When it is night or dark,the camera
LIMIT
automatically detects the light level and
 AUTO
x4
maintains a clear picture if this model is
activated.
- OFF : Deactivates the SENS-UP function.
Press SET to Return
- AUTO : Activates the SENS-UP function.
 RETURN:Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
English_19
●SETUP
Select the function
using the Function
Setup switch up/
down.
Setup
defOG
Through the defogging function, camera can automatically recognize fog concentration of the image, defog,
self correct in hazy, rainy, flue gas and other inclement weather to get a clear image.
1. When the SETUP menu screen is displayed, select ‘DEFOG’ by using the Function Setup switch.
2. Select a desired mode.
 AUTO : The camera will automatically correct image
DEFOG SETUP
according to the defogging level (low, middle,
high) set by the user.
MIDDLE
 1.LEVEL
 Manual : The camera will adjust the definition of the
2.RETURN
image according to user's preferences
through the defogging level (low, middle, high).
 OFF: Turn off Defogging function.
 Defogging and SSDR function cannot be run simultaneously. When defogging function is set
to AUTO or MANUAL mode, SSDR function is not available. When SSDR functions is turned
on, defogging would become inactive .
WHite bal(WHite balaNCe)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal’ by using the Function Setup switch
so that the arrow indicates ‘White Bal’.
2. Select a desired mode using the Function Setup switch.
※ Select one of the following 5 modes, as appropriate for your purpose.
 ATW : Select this when the color temperature is between 1,800°K and 10,500°K.
 OUTdOOR : Select this when the color temperature is between 1,800°K and
10,500°K.(sodium light inclusion)
 IN dOOR : Select this when the color temperature is between 4,500°K and 8,500°K.
 MaNUal : Select this to fine-tune White Balance
WB MANUAL
manually. Set White Balance first by using the ATW
or AWC mode. After that switch to MANUAL mode,  RED GAIN IIIIII*IIIIIIIIIIIIIIIIIIII 117
BLUE GAIN IIIIIIIIIIIIIIIII*IIIIIIIIII 193
fine-tune the White Balance and then press the
Function Setup switch.
 aWC→Set : To find the optimal luminance
Press SET to Return
level for the current environment, point the camera
towards a sheet of white paper and press the Function Setup switch. If the environment
changes, readjust it.
 White Balance may not work properly under the following conditions. In this case, select
AWC ↑SET mode.
1 When the color temperature of the environment surrounding the subject is out of the control range
2 When the ambient illumination of the subject is dim.
3 If the camera is directed towards a fluorescent light or is installed in a place where illumination
20_ Setup
ㅢ
ᮣ
BACKLIGHT
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
 HlC (High light Compensation) :
This function masks the strong light to
minimize white out due to over exposure and
preserve much of the on-screen details when
the camera aims a strong light source.
4.LEFT
5. RIGHT
6. RETURN
IIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIII IIIIIIIII
25
84
HLC SETUP
MIDDLE
▶ 1. LEVEL
NIGHT ONLY
2. LIMIT
3. MASK COLOR
BLACK
4. RETURN
- LEVEL : Adjusts the brightness level of a
monitoring area.
- LIMIT : Enable to change the operating condition.
- MASK COLOR : Change the color of the masking area. (Black, Red, Blue, Gray, Magenta)
 Off : Not being used
6615
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select 'SSNR3' by using the Function
Setup switch so that the arrow indicates 'SSNR3'.
2. Select a desired mode using the Function Setup
SSNR3
switch.
IIIIIIIIIIIIII IIIIIIIIIII 12
▶1. LEVEL
 Off : Deactivates SSNR3. Noise is not reduced.
2. RETURN
 ON : Activates SSNR3 so that noise is reduced.
3. Set the SSNR3 mode to 'ON' and press the Function Setup switch.
4. Then you can adjust the noise reduction level.
English_21
●
SETUP
The SCD-2022R/2042R is designed to deliver a distinctive subject and background
at the same time, even when the subject is backlight, by adopting a function of
the proprietary W6 DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the
Function Setup switch so that the arrow indicates BACKLIGHT .
2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
 UseR blC : Enables a user to directly
BLC SETUP
select a desired area from a
▶ 1.LEVEL
MIDDLE
picture, and to view the area
IIIIIIIIIIIIIIIIIIIII
9
2.TOP
more clearly.
IIIIIIIIIIIIIIIIIIIII
3.BOTTOM
24
Setup
 You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the EXPOSURE
menu is 'OFF'.
 When adjusting the noise reduction level of the SSNR3 mode, remember that the higher
the level set, the more the noise level will be reduced but that after image may also occur.
DAY/ NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up
and Down buttons so that the arrow indicates ‘DAY/NIGHT’.
2. Select a desired mode using the Left and Right buttons according to the picture display
you want.
 AUTO : The mode is switched to ’Color‘ in a normal environment, but switches to
’B/W‘ mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup switch. You can turn on or off
the burst signal on B/W mode.
AUTO SETUP
- BURST MODE : You can turn on or off the
▶1.BURST MODE
burst signal on B/W mode.
2.COLORB/W
- DURATION : You can select the brightness
DURATION
level at which the camera switches from day
DWELL TIME
to night mode.
3.B/WCOLOR
- DWELL TIME : You can select the duration
DURATION
DWELL TIME
time about changing the day/night mode.
4.RETURN
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
ON
FAST
5 SEC
FAST
10 SEC
 exTeRN : Ground to the grounding terminal to allow automatic switching between COLOR
and B/W(Black/White).
 COlOR : The picture is always displayed in color.
 b/W : The picture is always displayed in black
and white.
- BURST MODE : You can turn on or off
the burst signal on B/W mode.
- IR MODE (HIGH/ LOW/ USER) :
When IR LED is turned on in B/W, the
objects can be clearly identified due to the
function that decreases screen saturation
of objects within a short distance.
•
TOP/BOTTOM/LEFT/RIGHT :
After selecting USER, you can adjust the
range according to the location of objects.
BW MODE SETUP
䯝 1.BURST MODE
2.IR MODE
3.RETURN
IR MODE SETUP
䯝 1. IR MODE
Press SET to Return
 When AGC in the EXPOSURE menu is 'OFF', AUTO mode is not available to select.
22_ Setup
ON
HIGH
SPECIAL
OFF
OFF
OFF
INT
OFF
OFF
2.CAM TITLE
3.PRIVACY
4. MOTION DET
5. SYNC
6. COAX
7. SSDR
8.RETURN
 IMAGE ADJ
1) When the SPECIAL menu screen is displayed,
select ‘IMAGE ADJ’ by using the Function Setup
switch so that the arrow indicates ’IMAGE ADJ‘.
2) Select a desired mode using the Function Setup
switch.
- monitor : Please change the settings value of
video appropriate to your monitor.


LCD: Please select this menu item when using
an LCD monitor. You can change the gamma,
PED level and color gain in the sub menus.
IMAGE SETUP
▶ 1.MONITOR
LCD
2.REVERSE
OFF
3.SHARPNESS
ON
ENGLISH
4.LANGUAGE
5.RETURN
LCD MONITOR
▶ 1. GAMMA
0.55
III*IIIIIIIIIIIIIIIIII 15
2. PED LEVEL
IIIIIIIII*IIIIIIIIIIII
5
3. COLOR GAIN
4. RESET
USER : Please use this menu item when using
Press SET to Return
a monitor other than standard ones. You can
change the gamma, PED level and color gain in the sub menus.
- ReVeRse : You can reverse the picture.


OFF : You don’t reverse the picture.
H-REV : You can flip the picture horizontally on the screen.
- shARpNess : As you increase this value, the
picture outline becomes stronger and clearer.
Adjust this value appropriately depending on the
sharpness of the picture.
 OFF: Turn off Sharpness function.
SHARPNESS
▶ LEVEL
III IIIIIIIIIIIIIIIIII
7
Press SET to Return
ON : The higher the level is,the sharper and
clearer the outline of the image becomes.
 ER (Enhanced Resolution) : Choosing this mode can increase the sharpness of the picture
under the colour mode.

English_23
● SETUP
㨾
㺥
1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup
switch so that the arrow indicates ‘SPECIAL’.
SPECIAL
2. Select a desired mode using the Function Setup
▶ 1.IMAGE ADJ
switch.
Setup
- lANGUAGe : You can select the menu language according to your requirements.
- RUTURN : Select this to save the IMAGE ADJ menu settings and return to the
SPECIAL menu.
 CAm TITle : If you enter a title, the title will appear on the monitor.
1 If the SPECIAL menu screen is displayed, use the Function Setup switch so
that the arrow indicates ‘CAM TITLE’.
CAMERA TITLE SETUP
2 Set it to ‘ON’ by using the Function
Setup switch.
A B C D E F G H I J K L M
3 Press the Function Setup switch.
N O P Q R S T U V W X Y Z
4 Use the Function Setup switch to move to a
a b c d e f g h i j k l m
desired letter and select the letter by pressing
n o p q r s t u v w x y z
the switch. Repeat this to enter multiple letters.
- . / 0 1 2 3 4 5 6 7 8 9
You can enter up to 15 letters. Move the
← → C L R P O S E N D
cursor to ↑ for entering a space, then press
_______________
the Function Setup switch, the cursor will skip
to the next.
5 Enter a title, move the cursor to ’POS’ and press
the Function Setup switch. The entered title appears
on the screen. Select the position to display the title
on the screen by using the Function Setup switch
and press. When the position is determined, select
’END’ and press the Function Setup switch to
return to the SPECIAL menu.
FRONT DOOR
 WhentheCAMTITLEmenuis‘OFF’,notitlewillbedisplayedonthemonitorscreeneven
if you enter one.
 OnlyEnglishisavailableinthismode.
 If you move the cursor to CLR and press the Function Setup switch, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
FunctionSetupswitch.Movethecursoroverthelettertobeedited,movethecursorto
thelettertobeinsertedandthenpresstheFunctionSetupswitch.
 pRIVACy : Mask an area you want to hide on the screen.
1 When the SPECIAL menu screen is displPRIVACY AREA SETUP
ayed, press the Function Setup switch so
▶ 1.AREA
AREA1
that the arrow indicates ‘PRIVACY’.
2.MODE
OFF
2 Set up the mode using the Function Setup
3.MASK COLOR
WHITE
switch.
4.SEL POS
LEFT
- AREA : You can select up to 8 PRIVACY areas.
*IIIIIIIIIIIIIIIIIIIIIIIIII 42
5.POS
- MODE : Determines whether to use the area
6.RETURN
selected.
24_ Setup
⤾
ⱌ
y MOTION DET : This product has a feature that allows
you to observe movement of objects
in 4 different areas on the screen,
and the words 'MOTION DETECTED'
appear on the screen when movement
is detected. You can monitor activity
more efficient.
MOTION DET
 1.AREA
2.MODE
3.TOP
4.BOTTOM
5.LEFT
6.RIGHT
7.SENSITIVITY
8.RETURN
AREA1
ON
4
IIIIII IIIIIIIIIIIIIII 15
IIIIIIIIIIIIIIIIIIIII 9
IIIIII IIIIIIIIIIIIIII 46
IIIIIIIIIIIIIIIIII III
4
IIIIIIIIIIIIIIIIIIIII
1 When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the
arrow indicates 'MOTION DET'.
2 Set up the mode using the Function Setup switch.
AREA:Youcanselectupto4MDareas.
MODE:DetermineswhethertousetheMDareaselectedinAREA.
TOP/BOTTOM/LEFT/RIGHT:Adjust the area to be enhanced.
SENSITIVITY:Adjust the sensitivity of MD. the lower level, the higher sensitivity.
RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL
menu.
 MOTIONDETareasshowonlyMOTIONDET menu.Therefore,MOTIONDETareasdon’t
display on the monitor screen.
y syNC : The SCD-2022R/2042R just support the DC power input, so the SYNC fixed on
"Internal Synchronization Type".
- INT: Internal Synchronization Type
 COaX : COAX option is set to "On" will specify the use of coaxial communication.
 SSDR(samsung super dynamic Range) :
SSDR illuminates darker areas of an image while
retaining the same light level for brighter areas to
even out the overall brightness of images with
high contrast between bright and dark areas.
SSDR SETUP
▶ LEVEL
IIIIIIIIII*IIIIIIIIIII
8
Press SET to Return
English_25
● SETUP
㾎
- MASK COLOR : Determine area color. You can select GREEN, RED, BLUE, BLACK,
WHITE and GRAY.
- SEL POS/POS : Adjust the size and position of the selected area.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
⥂
Setup
1. When the SETUP menu screen is displayed, select ‘SSDR’ by using the
Function Setup switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
SSDR ON
SSDR OFF
 RETURN : Select this to save the SPECIAL menu settings and return to the MAIN SETUP
menu.
EXIT
Select a desired EXIT mode using the Function Setup switch depending on the camera purpose.
 sAVe : Save the current settings and exit the MAIN SETUP menu.
 NOT sAVe : Do not save the current settings and exit the MAIN SETUP menu.
 ReseT: Resets the camera settings to the factory defaults. Monitor, Language
and COAX settings are not initialized.
26_ Setup
ড়
Troubleshooting
TROUBLESHOOTING
If you have trouble operating your camera, refer to the following table. If the guidelines do not enable
you to solve the problem, contact an authorized technician.
SOLUTION
Nothing appears on the screen.
▶ Check that the power cord and line connection between the
camera and monitor are fixed properly.
▶ Check that you have properly connected VIDEO cable to the
camera VIDEO output jack.
The image on the screen is dim.
▶ Is the lens stained with dirt? Clean your lens with a soft, clean cloth.
▶ Check the monitor and DVR settings.
▶ If the camera is exposed to very strong light, change the camera position.
The image on the screen is dark.
▶ Adjust the contrast feature of the monitor or DVR.
▶ If you have an intermediate device, set the 75Ω / Hi-z properly.
The camera is not working
properly, and the surface of the
camera is hot.
▶ Check that you have properly connected the camera to an
appropriate power source.
The DAY/NIGHT function does
not work.
▶ Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
Color is not correct.
▶ Check the setting of WHITE BAL SETUP menu .
The screen flickers continually.
▶ Check that the camera is not pointing at the sun.
When coaxial communication is
not available
▶ Make sure that the camera and monitor are installed within
the recommended distance.
▶ Use the video amplifier equivalent to coaxitron if the
recommended installation distance is exceeded.
English_27
● TROUBLESHOOTING
PROBLEM
Specifications
‫މ‬
SPECIFICATIONS
6&'51
6&'53
Video
Imaging Device
1/3’’ Super HAD CCD II
Total Pixels
1020(H) x 508(V)
1020(H) x 596(V)
Effective Pixels
976(H) x 494(V)
976(H) x 582(V)
Scanning System
2:1 Interlace
Synchronization
Internal
Frequency
H : 15.734KHz / V : 59.94Hz
Horizontal Resolution
700 TV lines ( ER Mode ), B/W:700 TV Line
H : 15.625KHz / V : 50Hz
Min. Illumination
Color : 0.15Lux (50IRE@F1.2), 0.0002 Lux (50IRE@F1.2,Sens-up, 512x)
B/W : 0 LUX ( IR LED On)
s / N Ratio
52dB (AGC off, Weight on)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
Lens Type
Focal Length
3.8mm
Max. Aperture Ratio
F2.0
Angular Field of View
H : 78° / V : 59°
Min. Object Distance
0.4m
Lens Type
Fixed
Mount Type
Board Type
PAN / TILT / ROTATE
Pan /Tilt
0°~352° / 0°~75°
Operational
English, French, German, Spanish,
Italian, Chinese, Russian, Polish,
Czech, Romanian, Serbian,
Swedish, Danish, Turkish,
Portuguese
On Screen Display
English, Japanese, Spanish,
French, Portuguese, Korean
Camera Title
Off / On (Displayed 15 characters)
28_ Specifications
6&'51
Day & Night
6&'53
Auto (ICR) / Color / B/W / External D/N
● SPECIFICATIONS
Backlight Compensation OFF / USER BLC / HLC
Contrast Enhancement
SSDR ( Off/On )
Digital Noise Reduction 3D DNR ( Off/On )
Defog
Off / Auto / Manual
Motion Detection
Off / On
Privacy Masking
Off / On (8 programmable zones)
Gain Control
Off / Low / Middle / High
Electronic Shutter Speed 1/60 ~ 1/120,000 sec
White Balance
1/50 ~ 1/120,000 sec
ATW / Outdoor / Indoor / Manual / AWC → SET (1,800K° ~ 10,500K°)
Reverse
OFF / H-REV
IR Distance
7m ( IR LED 8 EA)
Communication
Coaxial Control ( SPC-300 Compatible )
Protocol
Coax : Pelco-C ( Coaxitron )
Environmental
Operating Temperature
-10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH
/ Humidity
Electrical
Input Voltage/ Current DC 12V±10% / 0.3A
Mechanical
Dimension
Ø107.6 x 83.7mm
Weight
240g
English_29
Specifications
SPECIFICATIONS
6&'51
6&'53
Video
Imaging Device
1/3’’ Super HAD CCD II
Total Pixels
1020(H) x 508(V)
1020(H) x 596(V)
Effective Pixels
976(H) x 494(V)
976(H) x 582(V)
Scanning System
2:1 Interlace
Synchronization
Internal
Frequency
H : 15.734KHz / V : 59.94Hz
Horizontal Resolution
700 TV lines ( ER Mode ), B/W:700 TV Line
H : 15.625KHz / V : 50Hz
Min. Illumination
Color : 0.15Lux (50IRE@F1.2), 0.0002 Lux (50IRE@F1.2,Sens-up, 512x)
B/W : 0 LUX ( IR LED On)
s / N Ratio
52dB (AGC off, Weight on)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
Lens Type
Focal Length
8mm
Max. Aperture Ratio
F2.0
Angular Field of View
H : 34° / V : 26°
Min. Object Distance
0.4m
Lens Type
Fixed
Mount Type
Board Type
PAN / TILT / ROTATE
Pan /Tilt
0°~352° / 0°~75°
Operational
English, French, German, Spanish,
Italian, Chinese, Russian, Polish,
Czech, Romanian, Serbian,
Swedish, Danish, Turkish,
Portuguese
On Screen Display
English, Japanese, Spanish,
French, Portuguese, Korean
Camera Title
Off / On (Displayed 15 characters)
30_ Specifications
6&'51
Day & Night
6&'53
Auto (ICR) / Color / B/W / External D/N
● SPECIFICATIONS
Backlight Compensation OFF / USER BLC / HLC
Contrast Enhancement
SSDR ( Off/On )
Digital Noise Reduction 3D DNR ( Off/On )
Defog
Off / Auto / Manual
Motion Detection
Off / On
Privacy Masking
Off / On (8 programmable zones)
Gain Control
Off / Low / Middle / High
Electronic Shutter Speed 1/60 ~ 1/120,000 sec
White Balance
1/50 ~ 1/120,000 sec
ATW / Outdoor / Indoor / Manual / AWC → SET (1,800K° ~ 10,500K°)
Reverse
OFF / H-REV
IR Distance
7m ( IR LED 8 EA)
Communication
Coaxial Control ( SPC-300 Compatible )
Protocol
Coax : Pelco-C ( Coaxitron )
Environmental
Operating Temperature
-10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH
/ Humidity
Electrical
Input Voltage/ Current DC 12V±10% / 0.3A
Mechanical
Dimension
Ø107.6 x 83.7mm
Weight
240g
English_31
Specifications
DIMENSION
Unit: mm
Ø107.6
83.7mm
5
R4
81.6mm
32_ Specifications
MEMO
MEMO
MEMO
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920
Fax : +1-201-373-0124
www.samsungcctvusa.com
www.samsungtechwin.com
www.samsungsecurity.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300, FAX : +44-1932-45-5325
P/NO. : PT01-001711A