Volvo Brochure Wheel Loader L260H English

L260H
Volvo Wheel Loaders 34-39 t 421 hp
A class of its own
Committed to its legacy, Volvo was the first to present a 35 tonne wheel
loader to the industry in 2011 – with the L250G. Created with the
customer for the customer, Volvo brings the next generation wheel loader
– the L260H.
Progress is in our DNA
Since introducing our first wheel loader, Volvo has continued to refine its concept for more than
half a century.
1954
The world’s first wheel
loader to feature a
parallel lift arm system
and attachment bracket
with quick coupler –
the H-10
2
1973
The first wheel loader
with direct injected turbo
engine – Volvo BM 1641
Volvo introduced
the world’s first truly
low-emission diesel
engines in construction
equipment (1974)
1981
Volvo introduced the
world’s first automatic
gear shifting system
(Automatic Power
Shift) and load sensing
hydraulic technology
1988
Comfort Drive Control
1990
Boom suspension
system
Volvo patented Torque
Parallel linkage (1991)
Smarter, stronger, faster
In an industry that’s always evolving, with growing business demands, customers need a machine they can
rely on. An asset to your operation, the L260H is a reliable machine, which has been upgraded with innovative
technologies and increased payload capacity, for greater productivity. Bringing you quality as standard and so
much more, unlock the full potential of your machine through our dealer network.
Over the years, we have revolutionized our machines, bringing customers unparalleled
productivity and efficiency.
2009
Volvo sets the standard
for the attachment
bracket (ISO 23727)
2010
2011
OptiShift
Introduction of the
L250G – the first in its
class
CareTrack
2016
Load Assist, powered by
the award-winning Volvo
Co-Pilot
2017
New generation
OptiShift
Second generation load
sensing hydraulics –
Patent pending
L260H
3
Get it done, faster
Primed for productivity, the innovative L260H combines the latest Volvo technology with
power and upgraded components to help you increase your payload. To achieve ultimate
performance, select from a range of tailor made Volvo attachments.
Volvo engine
Fast cycle times
Engineered for efficiency and productivity, the L260H is fitted with
a powerful D13 engine, delivering 6% more power and 5% more
torque than the L250H.
Achieve shorter cycle times with next generation load sensing
hydraulics, designed to enhance the responsiveness of attachments
and improve the lifting and lowering speed of the boom.
New transmission
Matched and attached
For ultimate performance, the L260H has been upgraded with
the new HTL310 transmission, which works in harmony with
the powerful engine and axels. The new converter delivers
increased torque output, resulting in better performance. For faster
acceleration and smooth operation, the steps between gears have
been reduced.
Get the most out of your L260H with our range of purpose-built
attachments, perfect for applications such as quarrying, aggregates,
mining and heavy infrastructure. Form one solid and reliable unit
with attachments that are ideally matched by size and design to your
machine’s parameters – including link-arm geometry, and breakout
and lifting forces.
4
Boost your productivity
by up to 15%
Increase your productivity with the L260H. Boasting up to 15% greater productivity than its forerunner, thanks to the increased wheel base
(50mm), and optimized weight distribution of the front frame and lifting arm system, enabling the use of larger buckets..
5
Load
Assist
Unlock the full potential of your machine’s productivity with Load Assist, a dynamic load weighing system with ±2% accuracy. Powered by the
10” Volvo Co-Pilot touchscreen, the system enables you to monitor the amount of material moved and easily manage work orders – the data
can then be stored and accessed remotely. In addition, you can track your machine’s fuel efficiency with the help of CareTrack.
6
Smarter operation
Engineered for efficient and smart work, the L260H is fitted with new generation hydraulics
and improved technology. Enhanced by Load Assist and Volvo Site Simulation, the
intelligent systems offer valuable insight about your operations, reducing fuel consumption
and increasing productivity.
New generation OptiShift
Increase your fuel savings by 10%
Do more with less fuel, thanks to a powerful engine and new
generation hydraulics, which save hydraulic pump power for other
functions, by reducing fluid flow when lowering and dumping.
Coupled with the new dry P-Brake, which eliminates drag losses
caused by the internal wet multi-disk brake.
For improved cycle times and greater fuel efficiency, customize
the lock-up engagement of your machine with new generation
OptiShift. The improved technology integrates the Reverse By
Braking (RBB) function – patented by Volvo – and the new torque
converter with lock-up, creating a direct drive between the engine
and transmission, reducing fuel consumption.
Fuel Report
Eco pedal
Identify any inefficiency with Fuel Report, designed to help you
reduce the industry’s number one operational cost factor. With
detailed machine data, Fuel Report supports in taking corrective
actions to reverse machine issues and improve fuel efficiency.
Save on machine wear and increase fuel efficiency with the eco
pedal. Uniquely designed by Volvo, the eco pedal encourages
economical operation, by applying a mechanical push-back force in
response to excess use of the accelerator.
7
Stronger
Unlock the full potential of your machine and take on demanding applications, with a
range of purpose built attachments. Volvo can custom build attachments to your specific
requirements, increasing your productivity.
Rehandling bucket
Experience up to 5% greater productivity with the new 7.3 m³ Volvo
Rehandling bucket. The redesigned bucket is easier to fill and
minimizes spillage, thanks to new convex sides and an improved
spill guard. To prevent spillage and absorb shocks, opt for the Boom
Suspension System, which automatically engages, depending on
gear or speed selection.
Proven Z-bar linkage
For strength in demanding applications, Volvo’s proven Z-bar linkage
provides high breakout force. The robust lifting arm enables fully
loaded buckets to be elevated to maximum height and fast hydraulic
speeds offer quick cycle times. For long lasting performance, the
lifting arm has double sealing on each of the pins.
Protect your bucket
Extend the life of your bucket with a choice of reinforcement options. Bolt-on edges protect the bottom
edge of the bucket, while segments protect the cutting edge of the bucket, increasing durability.
8
Rock
bucket
For easier filling and greater productivity, the new Volvo Rock bucket* boasts a longer floor and optimized radius and holds 11.5% more
material than before. For tunneling applications, Volvo also offers Side Dump Rock buckets.
*Currently only available as custom built attachment – contact your local dealer for more information.
9
Intelligently productive
Fully loaded
• Redesigned Rock bucket – holds 11.5%
more material
• New Rehandling bucket – up to 5%
greater productivity
• Custom built attachments
• Z-bar lifting arm with double sealing on
each pin
Built for the job
• Bucket leveling function
• Three hydraulic modes
• Choice of a single or multi levers
• Comfort Drive Control
Volvo Services
• Genuine Volvo Parts
• Operator training
• CareTrack
• Fuel Report
10
Boost your productivity by up to 15%
• 6% more power and 5% more torque than the L250H
• Increased wheel base, optimized weight distribution
• Next generation load sensing hydraulics
• New transmission – new converter and gear ratio
• Matched Volvo attachments
Maximize your uptime
Increase your fuel savings by 10%
• New generation OptiShift
• New dry P-brake
• Saved hydraulic pump power
• Eco pedal
• Load Assist
• Delayed engine shutdown
• Easier access to the P-brake and BSS
accumulators
• Tilting cab – 30° or 70°
• Electronically-operated engine hood
• Strong frame and central hinge
11
The operator’s
choice
Operate in comfort from the best cab on the market, the Volvo cab can be equipped with a new adjustable seat. Access the cab safely and
effortlessly using the steps and open the door with ease, thanks to the optional remote-control opener.
12
Boost your performance
Built with the customer, for the customer, the L260H boasts a range of features to
enhance your operating experience. For increased productivity, the Volvo cab can be
customized to your preference and additional cameras offer greater visibility.
Comfortably productive
Visibility
Customize your machine and ensure precise control of hydraulic
functions, with the choice of single or multi levers. To get the most
out of each operation, select from three hydraulic modes, according
to your preferred responsiveness. To reduce operator fatigue and
improve productivity, Comfort Drive Control gives you the opportunity
to steer the machine from a small lever.
To enhance visibility, the L260H has new rear-view mirrors and can
be equipped with a rear-view camera. Optimized by the radar detect
system, which works with the camera to give a visual and audible
alert to the operator of unseen on-coming objects. Orange handrails
and steps have been placed on the machine, intended to stand out
to the operators and maintenance staff.
Operator training
Bucket leveling function
Take your productivity to the next level with the new bucket leveling
function. Automatically return the bucket to level from both dump
and curl positions, enhancing operator performance.
Increase productivity and reduce fuel consumption by learning how
to operate your wheel loader in the most efficient way. Volvo offers
operator training, which encompasses the best practices in the
industry.
13
Maximize your uptime
Offering strength in demanding applications, the L260H is built to last. Maintain the life
of your machine with simple serviceability and proactive dealer support, as well as flexible
maintenance and repair plans.
Durable by design
Improved component access
Minimize downtime and increase component life with easier access
to the Boom Suspension System accumulators – now placed on the
outside of the front frame – and P-brake, which is now external.
Designed with durability in mind, the L260H is built with a
strong frame structure, ideally-matched to Volvo powertrain. The
hydraulically-driven cooling fan regulates component temperature
and automatically reverses, permitting self-cleaning of the cooling
units.
Delayed shutdown
Reduce the wear on your engine with new delayed engine
shutdown, which can be scheduled to activate automatically by the
operator. The intelligent function turns off the machine when the
turbo charger has cooled down to the appropriate temperature,
reducing component wear.
14
Here to support you
Maintain productivity and machine uptime with our range of readily
available Genuine Volvo Parts – all backed by Volvo warranty. We’re
here to help you stay on track, offering flexible maintenance and
repair plans.
Industry leading
serviceability
For unrestricted access to vital components, the Volvo cab can be tilted to either a 30º or 70º angle. For improved serviceability and easy
access to the engine, the wide-opening engine hood is operated electronically.
15
Volvo L260H in detail
Engine
Drivetrain
V-ACT Stage IV/Tier 4F 13 liter, 6-cylinder straight turbocharged diesel engine
with 4 valves per cylinder, overhead camshaft and electonically controlled unit
injectors. The engine has wet replacable cylinder liners and replacable valve
guides and valve seats. The throttle applications is transmitted electrically from
the throttle pedal or the optional hand throttle .
Air Cleaning: 2 stages.
Cooling system: Hydrostatic, electronically controlled fan and intercooler of the
air-to-air type.
Engine
Volvo
D13J
Max. power at
r/min
1 500
SAE J1995 gross
kW
310
hp
421
ISO 9249, SAE J1349 net
kW
309
Max. torque at
hp
420
r/min
1 100
Nm
2 343
SAE J1995 gross
ISO 9249, SAE J1349 net
Economic working range
Nm
2 328
r/min
800 - 1 600
l
12.8
Displacement
Power
kW
Torque
Nm
Economic working range
320
2 400
300
2 200
280
2 000
260
1 800
240
1 600
220
200
180
Power
Torque
160
140
800
1 000
1 200
1 400
1 600
1 800
2 000
1st gear
km/h
6.7/6.6
2nd gear
km/h
11.6/11.4
3rd gear
km/h
21.7/21.4
4th gear
km/h
Measured with tires
Front axle/rear axle
Rear axle oscillation
Ground clearance
at oscillation
36.5/36.1
29.5R25 L4
AWB 50B / 41
±°
15
mm
600
°
15
Steering System
Steering system: Load-sensing, hydrostatic articulated steering.
System supply: The steering system has priority feed from a loadsensing axial
piston pump with variable displacement.
Steering cylinders: Two double-acting cylinders.
Steering cylinders
2
Rod diameter
mm
60
1 000
Stroke
mm
525
800
r/min
90
Working pressure
MPa
26
Maximum flow
l/min
202
±°
37
Maximum articulation
Service Refill
Service accessibility: Large, easy-to-open hood covering whole engine
department, electrically operated. Fluid filters and component breather air filters
promote long service intervals. Possibility to monitor, log and analyze data to
facilitate troubleshooting.
V
24
V
2 x 12
Ah
2 x 170
16
2.02:1
Maximum speed, forward/reverse
1 200
Voltage
Starter motor output
HTL310
mm
Batteries
Cold cranking capacity, approx
Volvo
Torque multiplication, stall ratio
Cylinder bore
Central warning system:
Contronic electrical system with central warning light and buzzer for following
functions: - Serious engine fault - Low steering system pressure - Over speed
warning engine - Interruption in communication (computer fault)
Central warning light and buzzer with the gear engaged for the following
functions: - Low engine oil pressure - High engine oil temperature - High
charge air temperature - Low coolant level - High coolant temperature - High
crank case pressure - Low transmission oil pressure - High transmission
oil temperature - Low brake pressure - Engaged parking brake - Fault on
brake charging - Low hydraulic oil level - High hydraulic oil temperature Overspeeding in engaged gear - High brake cooling oil temperature front and
rear axles.
Alternator rating
Transmission
1 400
Electrical System
Battery capacity
Torque converter: Single-stage.
Transmission: Volvo countershaft transmission with single lever control. Fast
and smooth shifting of gears with Pulse Width Modulation (PWM) valve. Torque
converter with lockup.
Transmission: Volvo Automatic Power Shift (APS) with fully automatic shifting
1-4 and mode selector with 4 different gear shifting programs, including AUTO.
Axles: Volvo fully floating axle shafts with planetary hub reductions and nodular
iron axle housing. Fixed front axle and oscillating rear axle. 100% differential
lock on the front axle.
A
1 000
W/A
2 280/80
kW
7
Fuel tank
l
366
DEF/AdBlue® tank
l
31
Engine coolant
l
55
Hydraulic oil tank
l
226
Transmission oil
l
48
Engine oil
l
50
Axle oil front
l
78
Axle oil rear
l
80
Hydraulic System
Brake System
System supply: Two load-sensing axial piston pumps with variable displacement.
The steering system always has priority.
Valves: Double-acting 2-spool valve. The main valve is controlled by a 2-spool
pilot valve.
Lift function: The valve has three positions; raise, hold and lower position.
Inductive/magnetic automatic boom kickout can be switched on and off and is
adjustable to any position between maximum reach and full lifting height.
Tilt function: The valve has three functions including rollback, hold and dump.
Inductive/magnetic automatic tilt can be adjusted to the desired bucket angle.
Cylinders: Double-acting cylinders for all functions.
Filter: Full flow filtration through 10 micron (absolute) filter cartridge.
Working pressure maximum, pump 1 for
working hydraulic system
MPa
29.0 ± 0.5
Flow
l/min
252
at
MPa
10
engine speed
r/min
1 900
Working pressure maximum, pump 2 for
steering-, brake-, pilot- and working hydraulic
system
MPa
31.0 ± 0.5
Flow
l/min
202
at
MPa
10
engine speed
r/min
1 900
Working pressure maximum, pump 3 for
brake- and cooling fan system
MPa
25.0 ± 0.5
Flow
l/min
83
at
MPa
10
engine speed
r/min
1 900
Pilot system, working pressure
MPa
3.2 - 4.0
Lift
s
7.1
Tilt
s
1.9
Lower, empty
s
4.1
Total cycle time
s
13.1
Cycle times
Lift Arm System
Service brake: Volvo dual-circuit system with nitrogen-charged accumulators.
Outboard-mounted fully hydraulic operated, fully sealed oil circulation-cooled
wet disc brakes. The operator can select automatic declutch of the transmission
when braking by a switch on the instrument panel.
Parking brake: Dry disc brake. Applied by spring force, electro-hydraulic release
with a switch on the instrument panel.
Secondary brake: Dual brake circuits with rechargeable accumulators. One
circuit or the parking brake fulfills all safety requirements.
Standard: The brake system complies with the requirements of ISO 3450.
Number of brake discs per wheel front/rear
Lift cylinders
2
Number of brake discs per wheel
1
Accumulators
l
2 x 1.0 + 1 x 0.5
Accumulators for parking brake
l
1 x 0.5
Cab
Instrumentation: All important information is centrally located in the operator’s
field of vision. Display for Contronic monitoring system.
Heater and defroster: Heater coil with filtered fresh air and fan with auto and
11 speeds. Defroster vents for all window areas.
Operator’s seat: Operator’s seat with adjustable suspension and retractable
seatbelt. The seat is mounted on a bracket on the rear cab wall and floor. The
forces from the retractable seatbelt are absorbed by the seat rails.
Standard: The cab is tested and approved according to ROPS (ISO 3471),
FOPS (ISO 3449). The cab meets with requirements according to ISO 6055
(Operator overhead protection - Industrial trucks) and SAE J386 (“Operator
Restraint System”).
Refrigerant of the type R134a is used when this machine is equipped with air
conditioning. Contains fluorinated greenhouse gas R134a, Global Warming
Potential 1.430 t CO2-eq
Ventilation
m³/min
9
Heating capacity
kW
16
Air conditioning (optional)
kW
7.5
Sound Level
Sound level in cab according to ISO 6396/SAE J2105
LpA
dB(A)
70
External sound level according to ISO 6395/SAE J2104
LwA
Z-bar
2-1
Number of brake discs per wheel front
dB(A)
109
2
Cylinder bore
mm
190
Piston rod diameter
mm
110
Stroke
mm
873
Cylinder bore
mm
220
Piston rod diameter
mm
120
Stroke
mm
570
Tilt cylinder
1
17
Specifications
Tires L260H: 29.5 R25 L4
A
B
C
D
E
F
F1
F2
G
H
J
K
L
M
N
O
Forward dump at K and M
P
R
R1
S
Grading angle
T
U*
V
X
Y
Z
a1
a2
a3
a4
Standard boom
9 670
7 590
3 800
520
1 910
3 720
3 610
2 870
2 133
3 090
4 320
4 620
6 450
1 810
2 390
62
43
43
42
48
75
42
156
560
3 580
2 400
3 160
3 840
16 370
7 260
4 100
37
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
°
°
°
°
°
°
°
mm
mm
mm
mm
mm
mm
mm
mm
mm
°
* Carry position SAE
Bucket: 6.4 m³ STE P T SEG
Where applicable, specifications and dimensions are according to ISO 7131, SAE J732, ISO 7546, SAE J742, ISO 14397, SAE J818.
Long boom
9 974
7 860
3 800
529
1 997
3 726
3 621
2 883
2 133
3 408
4 683
4 989
6 816
1 733
2 668
57
45
47
44
51
81
46
214
650
3 580
2 400
3 160
3 848
16 597
7 259
4 099
37
Z
F1
F2
R
R1
U
X Y
a4
a2
a3
a1
V
18
L260H
GENERAL PURPOSE
(5)
REHANDLING (7)
6.9 m³
STE P
BOE
Volume, heaped ISO/SAE
Volume at 110% fill factor
Static tipping load, straight
at 35° turn
at full turn
Breakout force
A
E
H (3)
L
M (3)
N (3)
V
a1 clearance circle
Operating weight
m³
m³
kg
kg
kg
kN
mm
mm
mm
mm
mm
mm
mm
mm
kg
6.9
7.6
27 550
24 440
24 090
290.0
9 430
1 690
3 250
6 590
1 670
2 330
3 580
16 240
34 030
7.3 m³
STE P
BOE FF
(1)
7.3
8
27 610
24 490
24 130
284.1
9 440
1 710
3 260
6 630
1 720
2 230
3 650
16 300
33 990
7.3 m³
STE P
BOE
6.4 m³
STE P T
SEG
7.3
8
27 330
24 210
23 850
283.2
9 470
1 730
3 230
6 640
1 700
2 350
3 650
16 320
34 170
6.4
7
25 830
22 890
22 560
302.6
9 670
1 910
3 090
6 450
1 810
2 390
3 580
16 370
33 240
ROCK (6)
SAND (4)
6.8 m³
5.5 m³
5.9 m³
6.5 m³
STE P T STE RO P STE RO P SPN P T
SEG
T SEG
T SEG
SEG
6.8
7.5
25 640
22 710
22 370
299.6
9 690
1 920
3 070
6 480
1 820
2 400
3 650
16 440
33 360
5.5
6.1
26 980
23 980
23 630
335.9
9 470
1 710
3 250
6 680
1 680
2 320
3 580
16 270
34 630
5.9
6.5
27 050
24 040
23 700
325.2
9 530
1 760
3 200
6 760
1 700
2 340
3 580
16 300
34 560
6.5
7.2
26 020
23 020
22 680
256.1
9 960
2 160
2 920
6 830
2 020
2 520
3 580
16 550
35 190
LONG
BOOM (2)
6.8 m³
STE P
BOE FF
(1)
6.8
7.5
25 180
22 330
22 000
272.0
9 520
1 790
3 200
6 520
1 790
2 270
3 650
16 340
33 050
–
–
-3 300
-3 010
-2 970
-29.5
320
100
300
350
-90
270
–
–
480
(1) Flat floor bucket
(2) Measured with 5.5 m³ STE RO P T SEG bucket
(3) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge measured at 45° dump angle. (Spade nose buckets at 42°.)
(4) Measured with 29.5 R25 L3 tire
(5) Measured with 29.5 R25 L4 tire
(6) Measured with 29.5 R25 L5 tire
(7) Measured with 29.5 R25 L4 tire and additional counterweight
Note: This only applies to genuine Volvo attachments.
Bucket Selection Chart
Material
Material density: t/m3
L260H
BUCKETS
The volume handled varies with the bucket fill and is often greater than
indicated by the bucket’s ISO/SAE volume. The table shows optimum bucket
choice with regard to the material density.
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
Rehandling
Bucket fill, %
Material density, t/m3
Earth
110 - 115
1.4 - 1.6
Clay
110 - 120
1.4 - 1.6
Sand
100 - 110
1.6 - 1.9
Gravel
100 - 110
1.7 - 1.9
Rock
75 - 100
1.5 - 1.9
6.9 m3 STE P BOE
7.3 m3 STE P BOE FF
7.3 m3 STE P BOE
General purpose
6.4 m3 STE P T SEG
The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
6.8 m3 STE P T SEG
Rock
5.5 m3 STE RO P T SEG
5.9 m3 STE RO P T SEG
6.5 m3 SPN P T SEG
Sand
6.8 m3 STE P BOE FF
Long boom
5.5 m3 STE RO P T SEG
Supplemental Operating Data
Standard boom
Tires 29.5 R25 L4
Long boom
29.5 R25 L5
875/65R29 L3
29.5 R25 L5
875/65R29 L3
100
Width over tires
mm
50
100
50
Ground clearance
mm
30
10
20
0
Tipping load, full turn
kg
960
240
-2 120
-2 770
Operating weight
kg
1 280
440
1 760
920
19
Equipment
STANDARD EQUIPMENT
STANDARD EQUIPMENT
Engine
Contronic Monitoring System
Exhaust after-treatment system
Monitoring and logging of machine data
Two stage air cleaner, pre-cleaner, primary and secondary filter
Contronic display
Indicator for coolant level
Fuel consumption
Preheating of induction air
Diesel Exhaust Fluid/AdBlue consumption
Fuel pre-filter with water trap
Ambient temperature
Fuel filter
Clock
Crankcase breather oil trap
Test function for warning and indicator lights
Exterior radiator air intake protection
Brake test
Drivetrain
Automatic Power Shift
Fully automatic gearshifting, 1-4
PWM-controlled gearshifting
Forward and reverse switch by hydraulic lever console
Indicator glass for transmission oil level
Differentials: Front, 100% hydraulic diff lock. Rear, conventional.
OptiShift transmission with Lock-up RBB
Lock-up first gear
Electrical System
24 V, pre-wired for optional accessories
Alternator 24V/80A/2280W
Battery disconnect switch
Fuel gauge
Hour meter
Electric horn
Instrument cluster:
Fuel level
Diesel Exhaust Fluid/AdBlue level
Transmission temperature
Coolant temperature
Instrument lighting
Lighting:
Twin halogen front headlights with high and low beams
Parking lights
Double brake and tail lights
Turn signals with flashing hazard light function
Halogen work lights (2 front and 2 rear)
Test function, sound level at max fan speed
Warning and indicator lights:
Battery charging
Parking brake
Warning and display message:
Regeneration
Engine coolant temperature
Charge-air temperature
Engine oil temperature
Engine oil pressure
Transmission oil temperature
Transmission oil pressure
Hydraulic oil temperature
Brake pressure
Parking brake applied
Brake charging
Overspeed at direction change
Axle oil temperature
Steering pressure
Crankcase pressure
Attachment lock open
Safety Belt Warning
Level warnings:
Fuel level
Diesel Exhaust Fluid/AdBlue level
Engine oil level
Engine coolant level
Transmission oil level
Hydraulic oil level
Washer fluid level
Engine torque reduction in case of malfunction indication:
High engine coolant temperature
High engine oil temperature
Low engine oil pressure
High crankcase pressure
High charge-air temperature
Engine shutdown to idle in case of malfunction indication:
High transmission oil temperature
Slip in transmission clutches
Keypad, background lit
Start interlock when gear is engaged
20
STANDARD EQUIPMENT
STANDARD EQUIPMENT
Hydraulic System
Service and Maintenance
Main valve, double acting 2-spool with hydraulic pilots
Engine oil remote drain and fill
Variable displacement axial piston pumps (3) for:
1 Working hydraulics, Pilot hydraulics and Brake system
2 Working hydraulics, Pilot hydraulics, Steering and Brake system
3 Cooling fan and Brake system
Transmission oil remote drain and fill
Electro-hydraulic servo controls
Electronic hydraulic lever lock
Automatic boom kick-out
Automatic bucket positioner
Double-acting hydraulic cylinders
Indicator glass for hydraulic oil level
Hydraulic oil cooler
Brake System
Dual brake circuits
Dual brake pedals
Secondary brake system
Parking brake, electro-hydraulic
Brake wear indicators
Lubrication manifolds, ground accessible
Pressure check connections: transmission and hydraulic, quick-connects
Tool box, lockable
External Equipment
Orange hand rails
Fenders, front and rear
Viscous cab mounts
Rubber engine and transmission mounts
Frame, joint lock
Vandalism lock prepared for
Engine compartment
Radiator grille
Lifting eyes
Tie-down eyes
Fabricated counterweight
Counterweight, pre-drilled for optional guards
Cab
ROPS (ISO 3471), FOPS (ISO 3449)
Single key kit door/start
Acoustic inner lining
Cigarette lighter, 24 V power outlet
Lockable door
Cab heating with fresh air inlet and defroster
Fresh air inlet with two filters
Automatic heat control
Floor mat
Dual interior lights
Interior rear-view mirrors
Dual exterior rear-view mirrors
Sliding window, right side
Tinted windshield glass
Retractable seatbelt (SAE J386)
Adjustable steering wheel
Storage compartment
Document pocket
Sun visor
Beverage holder
Windshield washer front and rear
Windshield wipers front and rear
Interval function for front and rear wipers
21
Equipment
OPTIONAL EQUIPMENT
OPTIONAL EQUIPMENT
Engine
Hydraulic System
Air pre-cleaner, cyclone type
Boom suspension system
Air pre-cleaner, oil-bath type
Boom cylinder hose and tube guards
Air pre-cleaner, turbo type
Hydraulic fluid, biodegradable, Volvo
Engine auto shutdown
Hydraulic fluid, fire-resistant
Engine delayed shutdown
Hydraulic fluid, for hot climate
Engine block heater 230V/110V
Mineral oil for cold climate
Fuel fill strainer
Hydraulic 3rd function
Fuel heater
Single lever control, hydraulics 2 functions
Fuel filter, extra
Hand throttle control
Max. fan speed, hot climate
Radiator, corrosion-protected
Single lever control, hydraulics 3 functions
Brake System
Oil cooler and filter front & rear axle
Cab
Reversible cooling fan
Anchorage for Operator’s manual
Reversible cooling fan and axle oil cooler
Automatic Climate Control, ACC
Tires
ACC control panel, with Fahrenheit scale
29.5 R25
Asbestos dust protection filter
875/65 R29
Ashtray
Drivetrain
Cab air pre-cleaner, cyclone type
Diff lock front 100%, Limited Slip rear
Carbon filter
Speed limiter
Cover plate, under cab
Wheel/axle seal guards
Lunch box holder
Electrical System
Volvo Armrest, operator’s seat, left
Anti-theft device
Operator’s seat, Volvo air susp, heavy-duty, high back, heated
Alarm kit, anti-theft function in WECU
Operator’s seat, (air seat std) 2-point seat belt
Battery disconnect switch, additional in cab
Operator’s seat, (air seat std) 3-point seat belt
Emergency stop
Radio installation kit incl. 12 volt outlet, left side
Locking device, Tag out Lock out
Radio installation kit incl. 12 volt outlet, right side
Headlights, assym. left
Radio (with AUX, Bluetooth and USB connection)
License plate holder, lighting
Subwoofer
Rear view camera, monitor
Steering wheel knob
Rear view mirrors, el.adjusted and heated
Sun blinds, rear windows
Reduced function working lights, reverse gear activated
Sun blinds, side windows
Reverse alarm, audible
Timer cab heating
Reverse alarm, white noise
Window, sliding, door
Reverse warning light, strobe lighting
Universal door/ignition key
Shortened headlight support brackets
Remote door opener
Side marker lamps
Forward view mirror
Warning beacon LED
Warning beacon LED automatic
Cab heater power outlet 240V
Service and Maintenance
LED Head Light
Automatic lubrication system
LED tail light
Cleaner kit, with air blow gun
LED working lights, attachments
ROX, rapid oil exchange pump
LED working lights on cab, front and rear
Oil sampling valve
LED working lights on cab, front, 2 alt. 4 LED lamps
Refill pump for grease to lube system
LED working lights on cab, rear, 2 alt. 4 LED lamps
Tool kit
LED working lights, rear in grille, 2 LED lamps
Wheel nut wrench kit
LED working lights, front above head lamps, 2 LED lamps
CareTrack, GSM, GSM/Satellite
LED work lights, side on cab, 4 LED lamps
LED light packages
Telematics, Subscription
Protective Equipment
Working lights halogen, attachments
Belly guard front
Working lights on cab halogen, front and rear
Belly guard rear
Working lights on cab halogen, rear
Belly guard rear, oil pan
Electrical distribution unit 24 volt
Center hinge and rear frame guard
Alternator 120 amp, heavy-duty
Cover plate, heavy-duty, front frame
Load Assist
Cover plate, rear frame
Radar detect system
Cab roof, heavy-duty
Forward camera, colour
Guards for front headlights
Parking brake alarm, audible for air susp seats
Guards for radiator grill
Jump start connector, NATO-Type
Guards for tail lights
Windows, side and rear guards
Windshield guard
Corrosion protection, painting of machine
22
OPTIONAL EQUIPMENT
OPTIONAL EQUIPMENT
External Equipment
Attachments
Cab ladder, rubber-suspended
Buckets:
Deleted front mudguards
Rock straight or spade nose
Fire suppression system
General purpose
Fire extinguisher
Re-handling
Fire extinguisher , two pieces
Side-dump
Mudguards, full cover, front and rear
Light material
Mudguards, full cover wideners and prot. Included
Wear parts:
Long boom
Bolt-on and weld-on bucket teeth
Tow hitch
Segments
Cutting edge in three sections, bolt-on
Other Equipment
CE-marking
Material handling arm
Comfort Drive Control (CDC)
Counterweight, re-handling
Secondary steering with automatic test function
Sound decal, EU
Sound decal, USA
Reflecting stickers (decals), machine contour
Reflecting stickers (stripes), machine contour Cab
Noise reduction kit, exterior
SELECTION OF VOLVO OPTIONAL EQUIPMENT
Wide tires
Central lubrication system
Seat and control options
Rehandling package
Radar detect system
Long boom
Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice.
The illustrations do not necessarily show the standard version of the machine.
23
Ref. 20054556_B / English-21 / 2017.12 / WLO / Volvo, Global Marketing
Download PDF
Similar pages