Partner ACS R4 - Alarm Systems of Rome

Quick Reference Guide For
Partner ACS R4 – System Programming
System Programming – From extension 10 or 11 (Any MLS display phone) dial
Feature 00, then press the Left Intercom button 2 times to enter System Programming.
The numbers in parentheses after the program item heading are the factory default values.
To end the System Programming session dial Feature 00.
System Date (010100)
Dial #101
Dial date (MMDDYY)
System Day (1)
Dial #102
Dial day (1-7, 1=Sun, 7=Sat)
System Time (0000)
Dial #103
Dial time (HHMM) in 24-hour format
Number of Outside Lines
Dial #104
Dial number of lines (01-31)
Transfer Return Rings (4)
Dial #105
Dial return rings (0-9), 0=No return
Recall Timer (18=450msec)
Dial #107
Dial recall interval (01-80)
Each increment of 1 = 25msec
Rotary Dial Timeout (2)
Dial #108
1=4 sec, 2=8 sec, 3=12 sec
Outside Conference Denial (1)
Dial #109
1=Allowed, 2=Disallowed
ASA Delay (2)
Dial #110
Dial ring delay (0-9)
ASA Button (Ext. 10) (2)
Dial #111
1=Assigned to next available button
w/lights, 2=Not assigned,
3=Press button to custom assign
DXD Delay (2)
Dial #112
Dial Ring Delay (0-9)
DXD Button (Ext. 10) (2)
Dial #113
1=Assigned to next available button
w/lights, 2=Not assigned, 3=Press
button to custom assign
Page 1 of 11
Quick Reference Guide For
Partner ACS R4 – System Programming
Outgoing Call Restriction Button (2)
Dial #114
1=Assigned, 2=Not assigned,
3=Select button
Wake Up Service Button (2)
Dial #115
1=Assigned, 2=Not assigned,
3=Select button
Ring On Transfer (1)
Dial #119
1=Active, 2=Not active
ASA Mode (1)
Dial #121
1=Hold, 2=Disconnect, 3=Ring a
programmable button
Caller ID Type (1)
Dial #122
1=USA, 2=Singapore
Backup Programming – Auto (2)
Dial #123
1=Active, 2=Not active,
3=Backup alarm cleared
Backup Programming – Manual
Dial #124
Press Enter to begin backup
Restore Programming (1)
Dial #125
1=Manual MMDDYY,
2=Automatic MMDDYY
Press Enter to begin restore
Automatic Daylight/Standard Times (1)
Dial #126
1=Active, 2 = Not active
System Mode (Key)
Dial #198
Key = 8632851
Pool = 8632852
System will restart
Dial Mode (1)
Dial #201
Dial line number (01-31)
1=Touchtone, 2=Rotary
Hold Disconnect Timer (09)
Dial #203
Dial line number (01-31)
00=None, 12=600msec (Each
increment of 01 = 50msec)
ASA Lines (2)
Dial #204
Dial line number (01-31)
1=Assigned, 2=Not assigned
DXD Lines (2)
Dial #205
Dial line number (01-31)
1=Assigned, 2=Not assigned
Page 2 of 11
Quick Reference Guide For
Partner ACS R4 – System Programming
Group Call Distribution (2)
Dial #206
Dial group number (1-6, 7 = VMS group)
Dial line number (01-31)
1=Assigned, 2=Not assigned, 3=VMS Cover
Pool Line Assignment (2)
Dial #207
Dial line number (01-31)
1=No pool, 2=Main pool 880,
3=Pool 881, 4=Pool 882, 5=Pool 883
Line Coverage Extension
Dial #208
Dial line number (01-31)
Dial extension (10-49)
Unique Line Ringing (1)
Dial #209
Dial line number (01-31)
Dial ring pattern (1-8)
Line Assignment
Dial #301
Dial extension (10-49)
Dial line number (01-31)
1=Assigned, 2=Not assigned
3=Select button
Line Access Restriction (1)
Dial #302
Dial extension (10-49)
Dial line number (01-31)
1=No restriction, 2=Out only,
3=In only, 4=No access
Language (1)
Dial #303
1=English, 2=Spanish, 3=French
Automatic Extension Privacy (2)
Dial #304
Dial extension (10-49)
1=Assigned, 2=Not assigned
Abbreviated Ring (1)
Dial #305
Dial extension (10-49)
1=Active, 2=Not active
Transfer Return Extension(*)
Dial #306
Dial extension (10-49)
Dial extension to which a transferred
call will be returned (10-49)
* = Extension transferring call
Forced Account Code Entry (2)
Dial #307
Dial extension (10-49)
1=Assigned, 2=Not assigned
Distinctive Ring (1)
Dial #308
Dial extension (10-49)
1=Active, 2=Not active
Page 3 of 11
Quick Reference Guide For
Partner ACS R4 – System Programming
Intercom Dial Tone (1)
Dial #309
1=Regular, 2=Machine
Automatic VMS Cover (2)
Dial #310
Dial extension (10-49)
1=Assigned, 2=Not assigned
External Hotline (2)
Dial #311
Dial extension (10-49)
1=Assigned, 2=Not assigned
Voice Interrupt On Busy (2)
Dial #312
Dial extension (10-49)
1=Assigned, 2=Not assigned
Line Access Mode
Dial #313
Dial extension (10-49)
1=Pool (All except 10)
2=Key
Pool Extension Assignment
Dial #314
Dial Extension (10-49)
Dial Pool Access Code (880-883)
1=Assigned, 2=Not Assigned,
3=Select Button
Pool Access Restriction (1)
Dial #315
Dial extension (10-49)
Dial Pool Number (880-883)
1=No restriction, 2=Outgoing only,
3=Incoming only, 4=No access
Call Waiting (2)
Dial #316
Dial extension (10-49)
1=Assigned, 2=Not assigned
Caller ID Log Answered Calls (2)
Dial #317
Dial extension (10-49)
1=Active, 2=Not active
Caller ID Log All Calls (*)
Dial #319
Dial extension (10-49)
* =No extension assigned
Page 4 of 11
Caller ID Call Log Line Association
Dial #318
Dial extension (10-49)
Dial line number (01-31)
Call Coverage Rings (2)
Dial #320
Dial number of rings (1-9)
Quick Reference Guide For
Partner ACS R4 – System Programming
VMS Cover Rings (3)
Dial #321
Dial extension (10-49)
Dial number of rings (1-9)
Copy Settings
Dial #399
Dial source extension (10-49)
Dial target extension (10-49)
Outgoing Call Restrictions (1)
Dial #401
Dial extension (10-49)
1=No restriction, 2=Inside only,
3=Local only
Toll Call Prefix (1)
Dial #402
1=0/1 + Area Code,
2=Area Code only
System Password
Dial #403
Dial 4 digits to set password
Disallowed Phone Number List
Dial #404
Dial list number (1-8)
Dial list entry (01-10)
Dial phone number (12 digits max.)
Press Enter
Disallowed List Assignment (2)
Dial #405
Dial extension (10-49)
Dial list number (1-8)
1=Assigned, 2=Not assigned
Emergency Phone Number List
Dial #406
Dial list entry (01-10)
Dial phone number (12 digits max.)
Press Enter
Allowed Phone Number List
Dial #407
Dial list number (1-8)
Dial list entry (01-10)
Dial phone number (12 digits max.)
Press Enter
Allowed List Assignments (2)
Dial #408
Dial extension (10-49)
Dial list number (1-8)
1=Assigned, 2=Not assigned
Forced Account Code List
Dial #409
Dial list entry (01-99)
Dial account code (Up to 6 digits)
Press Enter
Star Code Dial Delay (0)
Dial #410
Dial delay in seconds (0-5),
6=Not active
Page 5 of 11
Quick Reference Guide For
Partner ACS R4 – System Programming
Pickup Group Extensions (2)
Dial #501
Dial group number (1-4)
Dial extension (10-49)
1=Assigned, 2=Not assigned
Calling Group Extensions (2)
Dial #502
Dial group number (1-4)
Dial extension (10-49)
1=Assigned, 2=Not assigned
Night Service Button (Extension 10 Only) (2)
Dial #503
1=Assigned to next available button w/lights
2=Not assigned
3=Press a button with lights to custom assign
Night Service Group (2)
Dial #504
Dial extension (10-49)
1=Assigned, 2=Not assigned
Hunt Group Extensions (2)
Dial #505
Dial group number (1-6, 7 = VMS group)
Dial extension (10-49)
1=Assigned, 2=Not assigned
VMS Hunt Delay (2)
Dial #506
Dial 1 (day), or 2 (night)
Dial line number (01-31)
Dial number of rings (0-6)
VMS Hunt Schedule (1)
Dial #507
Dial line number (01-31)
1=Always, 2=Day only, 3=Night only
Fax Extension (2)
Dial #601
Dial extension (10-49)
1=Assigned, 2=Not assigned
Music-On-Hold (1)
Dial #602
1=Active, 2=Not active
Hotline
Dial #603
Dial hotline extension (NOT 10, or the first
2 extensions of any 206 or 308)
Dial alerted extension (10-49, or 70 for page)
Doorphone 1 Extension
Dial #604
Dial extension (Any except first
2 extensions of any 206 or 308)
Page 6 of 11
Quick Reference Guide For
Partner ACS R4 – System Programming
Doorphone 2 Extension
Dial #605
Dial extension (Any except first 2
extensions of any 206 or 308)
Doorphone Alert Extensions (1)
Dial #606
Dial extension (10-49)
1=No Alert, 2=Door 1 Alert,
3=Door 2 Alert, 4=Door 1&2 Alert
AA Extensions (2)
Dial #607
Dial extension (10-49)
1=Assigned, 2=Not assigned
SMDR Record Type (1)
Dial #608
1=All calls, 2=Outgoing calls only
SMDR Top Of Page
Dial #609
SMDR Output Format (1)
Dial #610
1=15 digits, 2=24 digits
SMDR Talk Time (2)
Dial #611
1=Active, 2=Not active
Contact Closure Group (2)
Dial #612
Dial group number (1-2)
Dial extension (10-49)
1=Assigned, 2=Not assigned
Contact Closure Operation Type (2)
Dial #613
Dial a contact closure (1-2)
1=1 sec. On, 2=3 secs. on,
3=5 secs. on, 4=Toggle
Music On Hold Volume (4)
Dial #614
Dial volume (1-7)
System Reset
Dial #728
All calls disconnected,
all programming saved
Remote Administration Password
Dial #730
Current password displayed
Enter password (Up to 8 characters,
use 2-digit character codes on p. 10)
System Initialization
Dial #989
Display “Restart – Defaults”
Dial 25327 (CLEAR)
System is returned to factory default
Page 7 of 11
Quick Reference Guide For
Partner ACS R4 – Centralized Programming
Centralized Programming – From extension 10 or 11(Any MLS display phone) dial
Feature 00, press the Left Intercom button 2 times, then press the Right Intercom
button 1 time to enter Centralized Programming. The following station features can
only be changed in Centralized Programming. To program another extension, press
the Right Intercom button. Dial Feature 00 to end the programming session.
Automatic Line Selection (Do this procedure first before programming other features)
Dial extension (10-49)
Dial **
Press line or pool buttons in the order of desired selection. (To select intercom dial tone,
press the Left Intercom button first, then press line or pool buttons in the order of
desired selection.)
Dial ** to end
Line Ringing
Dial extension (10-49)
Observe the green lights for each line or pool assigned to the extension.
Immediate Ring = Steady light
Delayed Ring = Slow flashing light
No Ring = Fast fluttering light
Press each line or pool button until the desired ring option is set.
Page 8 of 11
Quick Reference Guide For
Partner ACS R4 – Station Features
To program a feature to a station button follow one of the following procedures:
Station Programming (At the station being programmed)
Dial Feature 00
Press the button to be programmed
Press the Feature button, then dial a feature code listed below
Program another button, or dial Feature 00 to end
Centralized Programming (At Station 10 or 11 Only)
Dial the extension (10-49) to be programmed
Press the button to be programmed
Press the Feature button, then dial a feature code listed below
Program another button, or dial Feature 00 to end
Feature Codes
*Do Not Disturb = 01
Exclusive Hold = 02
Recall (Flash) = 03
Saved Number Redial = 04
Last Number Redial = 05
Conference Drop = 06
*Privacy = 07
Touchtone Enable = 08
Message Light On = 09
Message Light Off = 10
**Call Forwarding/Call Follow Me = 11
**Account Code Entry = 12
Manual Signaling = 13
Voice Mailbox Transfer = 14
*Requires a button with lights
**Button with lights recommended
***Do NOT program on a button
Page 9 of 11
*VMS Cover = 15
*Caller ID – Name Display = 16
*Caller ID Inspect = 17
*Voice Interrupt On Busy = 18
**Background Music = 19
**Call Coverage = 20
**Station Lock = 21
***Station Unlock = 22
*Caller ID Call Logging & Dialing = 23
*Record-A-Call = 24
*Call Screening = 25
**Contact Closure 1 = 41
**Contact Closure 2 = 42
Quick Reference Guide For
Partner ACS R4 – Station Features
Additional Features
Enter Station Programming, or Centralized Programming
Press the button to be programmed
Call Pickup Individual = Press Left Intercom, dial 6, dial extension (10-49)
Call Pickup Group = Press Left Intercom, dial 66, dial group (1-4)
Direct Line Pickup – Active Line = Press Left Intercom, dial 68
Direct Line Pickup – Idle Line = Press Left Intercom, dial 8
Group Calling - Ring = Press Left Intercom, dial 7, dial group (1-4)
Group Calling – Voice = Press Left Intercom, dial *7, dial group (1-4)
Group Hunting – Ring = Press Left Intercom, dial 77, dial hunt group (1-6)
Group Hunting – Voice = Press Left Intercom, dial *77, dial hunt group (1-6)
Loudspeaker Paging = Press Left Intercom, dial 70
Simultaneous Paging = Press Left Intercom, dial *70
Extension Name Display
Enter Station Programming, or Centralized Programming
Press Left Intercom
Dial 2-digit code for each character
(MLS display = 12 characters limit, Partner display = 20 characters limit)
A = 21
B = 22
C = 23
D = 31
E = 32
F = 33
G = 41
H = 42
I = 43
J = 51
K= 52
L = 53
M= 61
Page 10 of 11
N = 62
O = 63
P = 71
Q = 72
R = 73
S = 74
T = 81 5 = 50
U = 82
V = 83
W = 91
X = 92
Y = 93
Z = 94
BLANK =11
0 = 00
1 = 10
2 = 20
3 = 30
4 = 40
6 = 60
7 = 70
8 = 80
9 = 90
Quick Reference Guide For
Partner ACS R4 – Auto/Speed Dialing
Auto Dial – Inside (Station DSS/BLF)
Enter Station Programming, or Centralized Programming
Press the button to be programmed
Press the Left Intercom button
Dial an extension (10-49)
Note: Dial * before the extension to make this a voice call instead of a ringing call
Auto Dial – Outside
Enter Station Programming, or Centralized Programming
Press the button to be programmed
Dial outside phone number (Up to 28 digits including special dialing characters)
Personal Speed Dial
Enter Station Programming, or Centralized Programming
Press the Feature button
Dial a 2-Digit Code (80-99)
Dial outside phone number (Up to 28 digits including special dialing characters.)
System Speed Dial (Note: NOT Done In System Programming)
At extension 10 or 11, dial Feature 00
Press Feature followed by a 3-digit speed dial code (600-699)
Dial phone number (Up to 28 digits including special dialing characters.)
Dial Feature 00 to end
Special Dialing Characters
Pause (1.5 Seconds) = Press Hold button
Recall (Flash) = Press Spkr button
Stop Dialing = Press Mic button
Touchtone Enable = Press Transfer button
Restriction Override = Dial * before the phone number
J & J Communications
770-795-5462 or 888-552-6665
www.jandjcommunications.com
Page 11 of 11
Download PDF
Similar pages