QuickSpecs
HP Workstation IT & Broadcast Rack Kits
Overview
Models
HP xw4200/xw4300 Depth Adjustable Fixed Rail Rack Kit (for use with IT racks only)
HP xw6200 Depth Adjustable Sliding Rail Rack Kit (for use with IT racks only)
HP xw8200/9300 Sliding Rail Rack Kit (for use with IT & Broadcast racks)
EK729AA
DY663A
DY664A
Introduction
HP Workstation IT and IT & Broadcast Rack Kit allow the installation of HP workstations in different kinds of racks, securely
with sliding rails.
HP xw4200/xw4300 Depth Adjustable Fixed Rail Rack Kit (EK729AA) attaches one xw4x00 workstation tower system
securely in a horizontal position with fixed rails on a mounting tray. The kit includes the necessary supplies for installing the
xw4200/xw4300 in HP round hole and square hole racks.
The rack mounting kit includes a mounting tray, depth adjustable fixed rails, and screws to mount the rails. The tray mounts
to the workstation by removing two screws on the rear, attaching the tray, and replacing the two screws. After the rails are
installed in the rack, the tray sits on the rails, and two screws secure the tray to the rack at the front
The HP xw4200/xw4300 Depth Adjustable fixed Rail Rack Kit is suitable for the following racks:
HP Series-E
Compaq 10000 Series Rack
(May also work on some third party racks)
HP xw6200 Sliding Rail Rack Kit (DY663A) attaches one HP xw6200 workstation tower system securely in a horizontal
position with sliding rails. The kit includes the necessary supplies for installing the sliding rack kit on an HP Workstation
xw6200 in HP round hole and square hole racks, and earlier HP racks.
The rack mounting kit includes left and right flanges, sliding rails, and screws to mount the slides and flanges. The inner
slides and flanges are attached to the workstation (after removing the plastic top cover), and the slides snap (or screw on for
non-HP racks). The workstation is then inserted into the rails, and secured to the rack with two thumbscrews.
The HP xw6200 Sliding Rail Rack Kit is suitable for the following racks:
HP Series-E
Compaq 10000 Series Rack
(May also work on some third party racks)
The HP xw8200/9300 Sliding Rail Rack Kit (DY664A) attaches one HP xw8200 or xw9300 workstation tower system
securely in a horizontal position with sliding rails. This kit includes a set of depth adjustable sliding rails that mount to racks
having square holes, round holes, and some third party racks including some having pre-threaded holes in the vertical
columns with rack depths from 24 - 30 inches, particularly broadcast racks. The kit also includes left and right mounting
flanges that attach to the computer (after removing the plastic foot and top cover), and mounting hardware for several
different racks (M5, M6, 10-32). The HP xw8200/9300
Sliding Rail Rack Kit is suitable for the following racks:
HP Series-E
Compaq 10000 Series Racks
Some Rack enclosures with pre-threaded columns
May work on other third party racks
The depth adjustable rails can be mounted at any height. The kit includes mounting hardware that will allow you to rackmount your workstation in the rack types listed above. The kit includes left and right mounting flanges that are attached to
the workstation after removing the plastic foot and top cover. The inner slide members also attach to the workstation, then it
is inserted into the outer slide (which is attached to the rack), and secured with 4 screws (two for each flange).
DA - 12373 Worldwide QuickSpecs — Version 3 — 4.25.2006
Page 1
QuickSpecs
HP Workstation IT & Broadcast Rack Kits
Overview
Compatibility
The HP xw4200/xw4300 Depth Adjustable Fixed Rail Rack Kit (EK729AA) is compatible with the HP xw4100, xw4200, and
xw4300 workstation only.
The HP xw6200 Sliding Rack Kit (DY663A) is compatible with the HP xw6200 workstation only.
The HP xw8200/9300 Sliding Rail Rack Kit (DY664A) is compatible with the HP xw8200, and xw9300 workstations.
Service and Support
All racking kit products have a one-year limited warranty or the remainder of the warranty of the HP product in which it is
installed. Technical support is available seven days a week, 24 hours a day by phone, as well as online support forums.
Parts and labor are available on-site within the next business day. Telephone support is available for parts diagnosis and
installation. Certain restrictions and exclusions apply.
DA - 12373 Worldwide QuickSpecs — Version 3 — 4.25.2006
Page 2
QuickSpecs
HP Workstation IT & Broadcast Rack Kits
Technical Specifications
HP xw4200/4300 Depth Dimensions (H x W)
Adjustable Fixed Rail Rack Mounting Depth
Rack Kit
7.75 (5U) x 19 in (22.23 x 48.26 cm)
Adjustable
Minimum Mounting Depth: 19 in (48.3 cm)
Maximum Mounting Depth: 31 in 79.6 cm)
Weight Capacity
100 lb (45 kg)
Material
Steel
Rack Mounting kit
Mounting Tray
Rails - Fixed, Depth Adjustable
Two mounting hardware kits (M5 and M6)
M5 Hardware Packet M5 clip nuts (12)
M5 screws (12)
M6 Hardware Packet M6 panhead screws (12)
M6 cage nuts (12)
HP xw6200 Sliding Rail Dimensions (H x W)
Rack Kit
Rack Mounting Depth
7.75 ( 4U) x 19 in (22.23 x 48.26 cm)
Adjustable
Minimum Mounting Depth: 24 in (60.96 cm)
(NOTE: Oouter slide is 30 inches long, so will
extend beyond a 24 inch deep rack)
Maximum Mounting Depth: 30 in (76.2 cm)
Weight Capacity
Material
Rack Mounting kit
100 lb (45 kg)
Steel
Left and right flanges
Slide, ball bearing
Mounting Hardware (M4)
M4 Hardware Packet M4 screws (8)
HP xw8200/9300
Sliding Rail Rack Kit
Dimensions (H x W)
Rack Mounting Depth
7.75 (5U) x 19 in (22.23 x 48.26 cm)
Adjustable
Minimum Mounting Depth: 24 in (60.96 cm)
Maximum Mounting Depth: 30 in (76.2 cm)
Weight Capacity
100 lb (45 kg)
Material
Steel
Rack Mounting kit
Left and right flanges with handles
Slide, ball/roller bearing
Four mounting hardware kits (M4, M5, M6 and 10-32)
M4 Hardware Packet M4 screws (8) (for attaching slides and flanges to computer)
M6 Hardware Packet M6 panhead screws (12)
M6 cage nuts (12)
M5 Hardware Packet M5 clip nuts (12)
M5 screws (12)
10-32 Hardware Packet 10-32 clip nuts (12)
10-32 panhead screws (12)
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
DA - 12373 Worldwide QuickSpecs — Version 3 — 4.25.2006
Page 3
Download PDF
Similar pages