Panasonic SCEN36 Operating Instructions

Operating Instructions
CD Stereo System
Model No.
SC-EN36
Dear customer
Thank you for purchasing this product.
Before connecting, operating or adjusting this product,
please read the instructions completely.
Please keep this manual for future reference.
Note
“EB” on the packaging indicates the United Kingdom.
Table of contents
Supplied accessories
cover
Safety precautions
2
The remote control
3
Control guide
3
Attach the stand to the unit
4
Placement of speakers
4
Connections
4
Disc operations
5
Radio operations
6
Timer
7
Sound adjustment
7
Troubleshooting guide
8
Changing the main unit and remote control mode
8
Maintenance
8
Specifications
9
Caution for AC Mains Lead
9
These instructions are applicable to the following systems.
System
SC-EN36
Main unit
SA-EN36
Speakers
SB-EN36
Supplied accessories
Please check and identify the supplied
accessories.
Use numbers indicated in parentheses when asking
for replacement parts.
(Product numbers correct as of February 2008.
These may be subject to change.)
1 Remote control
(N2QAYB000269)
1 FM/AM antenna
(N1DADYY00003)
1 Support stand
1 M3 white cord
(K2KC39A00002)
1 AC mains lead
(RFAX0025)
2 Batteries
(RYQX0512-H)
Note
• The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
• Do not use an AC mains lead from other equipment.
EB
SC-EN36_EB (RQTX0143)_B5.indd 1
RQTX0143-1B
2/27/2008 3:32:59 PM
Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight,
high temperature, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components,
thereby shortening the unit’s service life.
Do not place heavy items on the unit.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Voltage
Do not use high voltage power sources. This can overload the
unit and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not
damaged. Poor connection and lead damage can cause fire or
electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause
electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock
or malfunction. If this occurs, immediately disconnect the unit from
the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is
interrupted, indicators fail to light, smoke appears, or any other
problem that is not covered in these instructions occurs, disconnect
the AC mains lead and contact your dealer or an authorized service
center. Electric shock or damage to the unit can occur if the unit is
repaired, disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
-If you see this symbol-
RQTX0143
Information on Disposal for Users of Waste Electrical
& Electronic Equipment (private households)
2
This symbol on the products and/or accompanying
documents means that used electrical and electronic
products should not be mixed with general household
waste.
For proper treatment, recovery and recycling, please
take these products to designated collection points, where they
will be accepted on a free of charge basis. Alternatively, in some
countries you may be able to return your products to your local
retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable
resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from
inappropriate waste handling. Please contact your local authority
for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
SC-EN36_EB (RQTX0143)_B5.indd 2
Inside of product
Tuotteen sisällä
Produktets innside
CAUTION!
• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT
RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE
TO OVERHEATING, ENSURE THAT CURTAINS AND
ANY OTHER MATERIALS DO NOT OBSTRUCT THE
VENTILATION VENTS.
• DO NOT OBSTRUCT THE UNIT’S VENTILATION
OPENINGS WITH NEWSPAPERS, TABLECLOTHS,
CURTAINS, AND SIMILAR ITEMS.
• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH
AS LIGHTED CANDLES, ON THE UNIT.
• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
• DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
• USE ONLY THE RECOMMENDED ACCESSORIES.
• DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
The socket outlet shall be installed near the equipment and
easily accessible.
The mains plug of the power supply cord shall remain readily
operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptable.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile
telephone.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
2/27/2008 3:33:00 PM
The remote control
4
3
1
2
R6/LR6, AA
■ Batteries
■ Use
• Insert so the poles (+ and – ) match those in
the remote control.
• Do not use rechargeable type batteries.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile
sunlight for a long period of
exposed to direct
time with doors and windows closed.
• Aim at the sensor, avoiding
obstacles, at a maximum range
of 7 m directly in front of the
unit.
• Operation can be affected by
strong light sources, such as
direct sunlight, and the glass
doors on cabinets.
Remote control signal sensor
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Control guide
(7) [z PLAY] 14
Play timer on/off
1 [SLEEP] (7)
Sleep timer setting
2 Standby/on switch [^], [8] (5, 7)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit is still
consuming a small amount of power.
1
14
2
15
3
3 [CLOCK/TIMER] (7)
Clock and Timer setting
4 [PGM, -AUTO PRESET] (5, 6)
CD/MP3 Program, Tuner Preset (Manual)
[Long press] Tuner Preset (Auto)
5 [CLEAR] (5)
CD/MP3: Delete all programs
6 [DEL] (5)
Delete last programmed track
(5) [CD q/h] 17
Selector switch to CD
Direct CD Play/CD Pause
6
(4, 8) [MUSIC PORT] 18
Selector switch to MUSIC PORT
17
9 [ , , ALBUM] (5)
MP3: Previous/Next Album
10 [ENTER] (5, 8)
MP3: Confirm track selection during Program
Mode
11 [PRESET EQ] (7)
Preset EQ mode selector
(5) [g] 19
Stop button
18
19
8 [VOL-], [+VOL], [VOLUME -, +] (5, 7)
To adjust the volume
(5, 6) Numbered buttons [1-9, 0, ≧10] 16
To select a 2-digit number
e.g. 16: [≧10]  [1]  [6]
To select a 3-digit number
e.g. 226: [≧10]  [≧10]  [2]  [2]  [6]
5
7
7 [FM/AM] (6)
FM/AM select button
16
4
(5) [;, OPEN/CLOSE] 15
Open and Close CD lid
8
9
20
10
11
12
13
21
22
23
24
12 [REMASTER] (7)
Remaster on/off
(5, 6, 7) [u, 2], [i, 1], [2/u], [1/i] 20
CD: Skip/Search
MP3: Track Skip
Tuner: Tune up/down
[Long press] Auto tuning
(6) [PLAY MODE] 21
Play mode button
(7) [SURROUND] 22
Surround mode on/off
(5) [REPEAT] 23
Repeat on/off
(5) [DISPLAY] 24
CD: CD Display (Elapsed play time/
Remaining play time)
MP3: MP3 Display [Elapsed time/Album name/
Track name/ID3 (Album)/ID3 (Track)/ID3 (Artist)]
13 [D.BASS] (7)
D.BASS on/off
26
Remote control signal sensor 25
Display 26
Music port jack 27
Push to open the lid.
8
7
18
19
SC-EN36_EB (RQTX0143)_B5.indd 3
27
20
17
RQTX0143
2
25
15
3
2/27/2008 3:33:03 PM
➡ Page 3 for the buttons position of remote control and main unit.
Attach the stand to the unit
Ensure the stand is securely attached to the main unit
for stabilization.
Rear of the main unit
Note
• The supplied stand is specially designed for use
with this unit.
• Only use as indicated in this setup.
Insert the stand fully until
a click sound is heard.
Support stand
(included)
Placement of speakers
Speakers are designed identically so that no
left or right channel orientation is necessary.
Note
• Keep your speakers at least 10 mm away from
the system for proper ventilation.
• These speakers do not have magnetic
shielding. Do not place them near televisions,
personal computers or other devices easily
influenced by magnetism.
• You cannot take the front net off the speakers.
Caution
• Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if you
experience a sudden change in performance.
• Do not attach these speakers to walls or
ceilings.
Connections
1
Speakers
2
FM/AM antenna
3
AC mains lead
Connect the AC mains lead after all other connections
are complete.
Red Black
READ THE CAUTION FOR THE
AC MAINS LEAD ON PAGE 9
BEFORE CONNECTION.
2
Taped part
FM
antenna
To household AC mains socket
1
Black (-) Red (+)
AM antenna
Unplug the antenna connector by holding the
taped part.
Note
If the unit is left unplugged for longer than approximately
two weeks, all settings will revert to the factory settings.
Remember to reset the radio stations and any other
memory items before using the unit again.
Headphones (not included)
1
2
3
Reduce the volume level and
connect the headphones.
Plug type: 3.5 mm stereo.
Note
• To prevent hearing damage,
avoid listening for prolonged
periods of time.
• Excessive sound pressure
from earphones and
headphones can cause
hearing loss.
Portable audio equipment (Cords and equipment not included)
RQTX0143
Pause
Skip/S
Stand the antenna up on its base.
4
Stop
M3 white cord (included)
Portable audio player
Plug type: 3.5 mm stereo
MAIN UNIT
Start playback from the
portable audio source.
REMOTE CONTROL
➡
Note
• Adjust the volume and sound quality of this unit and the other equipment.
• For details, refer to the instruction manual of the other equipment.
SC-EN36_EB (RQTX0143)_B5.indd 4
2/27/2008 3:33:08 PM
Skip a
Direct
play
(Play
the tra
select
➡ Page 3 for the buttons position of remote control and main unit.
Disc operations
Basic play
 Press [8] to turn the unit on.
 Press [;, OPEN/CLOSE] to open the CD lid and then set the CD in
place.
Press [;, OPEN/CLOSE] again to close the lid.
Keep fingers away from the CD lid when it is closing to avoid possible
minor injury.
Label must face outward.
Press until you hear it click into place.
Program play
The function allows you to program up to 24 tracks.
PGM
CD
 Press [PGM, -AUTO PRESET] while stopped.
 Press the numbered buttons to select tracks. (Maximum 24 tracks)
Repeat this step to program other tracks.
 Press [CD q/h] to start play.
Track number
 Press [CD q/h] to start play.
 Adjust the volume.
Note
• Be sure to press the [;, OPEN/CLOSE] button to open and close the
CD lid.
• Damage may occur if the lid is forced closed.
• During standby, if the CD is ready in the unit, the unit comes on and
play begins. (One touch play)
Stop
Press [g].
Pause
Press [CD q/h]. Press again to resume play.
Skip/Search
Press [u, 2] or [i, 1] to skip.
Press and hold [u, 2] or [i, 1] to search.
Note
• You can search during play or while paused.
• You cannot search through MP3 files.
• You can only search within the current track during
program play, one track repeat, and random play.
ctions
Skip album
MP3
Press [ or , ALBUM] in the play mode.
Press [ or , ALBUM] once and then the numbered
buttons in the stop mode.
Direct access
play
CD Press the numbered buttons to select the
desired track.
MP3
 Press [ or , ALBUM] to select the album.
 Press [i, 1] once and then press the numbered
buttons to select the desired track.
(Play starts with
the track you
select.)
Program number
MP3
 Press [PGM, -AUTO PRESET] while stopped.
 Press [ or , ALBUM] to select your desired album.
 Press [i, 1] once and then press the numbered buttons to
select tracks. (Maximum 24 tracks)
 Press [ENTER].
Repeat step 2 to 4 to program other tracks.
 Press [CD q/h] to start play.
Album number
Track number
g Confirm a
programmed
track
Press [u, 2] or [i, 1] when “PGM” is
displayed in the stop mode. To check while
programming, press [PGM, -AUTO PRESET]
twice after “PGM” appears, then press [u, 2]
or [i, 1].
g Delete the last
track
Press [DEL] in the stop mode.
g Delete all
programs
Press [CLEAR] in the stop
mode.
“CLR ALL” is displayed.
g Cancel program
mode
Press [PGM, -AUTO PRESET] in the stop mode
to clear “PGM” indicator from the display.
Note
Program contents are stored in the unit’s memory even after changing to
a different function or turning the unit off. All program contents are erased
by pressing [CLEAR] or by opening the CD lid.
Repeat play
You can repeat program play or other selected play mode.
Press [REPEAT] before or during play.
“REPEAT ON” and “ & ” are displayed.
To cancel
Press [REPEAT] again.
“REPEAT OFF” is displayed and “ & ” is cleared.
Play Mode function
Press [PLAY MODE] to select the desired mode.
MP3
Album name
one selected track on the disc.
Press the numbered buttons to select the track.
1TR
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause.
CD
Elapsed play time
Remaining play time
Elapsed time
To play
1-TRACK
Track name
ID3 (Artist)
ID3 (Track)
ID3 (Album)
Note
• Maximum number of displayable characters: approximately 30.
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about the
track.
1-ALBUM
1ALBUM
MP3
RANDOM
a disc randomly.
RND
1-ALBUM
RANDOM
1ALBUM RND
one selected album on the disc.
Press [ or , ALBUM] to select the album.
MP3
all tracks in one selected album randomly.
Press [ or , ALBUM] to select the album.
Note
During random play, you cannot skip to previous track.
RQTX0143
Display function
Mode
5
SC-EN36_EB (RQTX0143)_B5.indd 5
2/27/2008 3:33:12 PM
Disc operations (continued)
Note on CD-R and CD-RW
➡ Page 3 for the buttons position of remote control and main unit.
MP3
This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an
audio recording disc for CD-DA and finalize* it when you finish recording.
The unit may not be able to play some discs due to the condition of the
recording.
* A process performed after recording that enables CD-R/CD-RW players to
play audio CD-R and CD-RW.
Caution
Choose discs with this mark:
Do not:
• use irregularly shaped CDs.
• attach extra labels and stickers.
• use CDs with labels and stickers that are coming off
or with adhesive exuding from under labels and stickers.
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids (Wipe with a soft, dry cloth.).
The unit can play MP3, a method of compressing audio without overly
hurting audio quality.
When creating MP3 files to play on this unit
• Maximum number of tracks and albums: 999 tracks and 256 albums.
• Compatible compression rate: Between 64 kbps and 320 kbps (stereo).
128 kbps (stereo) is recommended.
• Disc formats: ISO9660 level 1 and level 2 (except for extended formats).
• The time for reading TOC depends on the number of the tracks, the
folders or folder structures.
Limitations on MP3
• This unit is compatible with multi-session but if there are a lot of sessions
it takes more time for play to start. Keep the number of sessions to a
minimum to avoid this.
• This unit cannot play files recorded using packet write.
• If the disc includes both MP3 and normal audio data (CD-DA), the unit
plays the type recorded in the inner part of the disc.
If the disc includes both MP3 and other types of audio data (e.g. WMA or
WAV), the unit plays only the MP3.
• Depending on how you create MP3 files, they may not play in the order
you numbered them or may not play at all.
Radio operations
Manual tuning
Allocation settings
Each country allocates broadcast bands according to their particular
system.
You can change the AM steps. The step is factory-set to 9 kHz, but you
can change it to receive broadcasts allocated 10 kHz steps.
Any FM/AM frequencies preset in channels will be changed by this
procedure.
Preset them again.
 Select the FM band with [FM/AM] on the unit.
 Press and hold [FM/AM] on the unit.
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
To return to the original step, repeat the above steps.
Note
The preset memory will be initialized when you change your frequency step.
 Press [FM/AM] to select “FM” or “AM”.
 Press [PLAY MODE] to select “MANUAL”.
 Press [u, 2] or [i, 1] to select the frequency of the required
station.
To tune automatically
 Press [FM/AM] to select “FM” or “AM”.
 Press [PLAY MODE] to select “MANUAL”.
 Press and hold [u, 2] or [i, 1] until the frequency starts
changing rapidly.
• Auto tuning stops when it finds a station.
• To cancel auto tuning, press [u, 2] or [i, 1] once again.
Note
Auto tuning may not function when there is excessive interference.
Memory preset
To improve reception
FM
AM
You can preset up to 30 FM channels and up to 15 AM channels.
Preparation: Press [FM/AM] to select “FM” or “AM”.
Automatic presetting
Press and hold [PGM, -AUTO PRESET] to start presetting.
Manual presetting
Receive the radio stations after
connecting the antenna. Then
attach the antenna cord to a wall or
pillar where there is good reception.
Change the direction and location
of the antenna.
To improve FM sound quality
 Press [PLAY MODE] to select “MANUAL”.
 Press [u, 2] or [i, 1] to tune to the required station.
 Press [PGM, -AUTO PRESET].
 Press the numbered buttons to select a channel.
The station occupying a channel is erased if another station is preset in
that channel.
 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
To cancel
Press and hold [PLAY MODE] again until “MONO” disappears.
• “MONO” is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
Press the numbered buttons to select the channel.
For channels 10 to 30 press [≧10], then the two digits.
OR
 Press [PLAY MODE] to select “PRESET”.
 Press [u, 2] or [i, 1] to select the channel.
RQTX0143
Press and hold [PLAY MODE] to display “MONO”.
6
SC-EN36_EB (RQTX0143)_B5.indd 6
2/29/2008 4:51:00 PM
➡ Page 3 for the buttons position of remote control.
Timer
ms.
ereo).
mats).
e
essions
oa
Play timer
Setting the time
y
This is a 24-hour clock.
 Press [CLOCK/TIMER] to set the clock.
 Press [u, 2] or [i, 1] to select the time within 5 seconds.
(Press and hold to change the time faster.)
 Press [CLOCK/TIMER] again.
g To display the clock when the unit
is on
Press [CLOCK/TIMER]
Note
• The clock is accurate to within ±60 seconds a month. Readjust if
necessary.
• Set again after disconnecting the AC mains lead or power failure.
unit
You can set the timer to come on at a certain time to wake you up.
Preparation:
• Turn the unit on and set the clock.
• Prepare the music source (disc, radio or music port) and set the
volume.
 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
zPLAY
Original display
 Within 5 seconds, press [u, 2] or [i, 1] to set the starting time.
 Press [CLOCK/TIMER] to confirm.
 Repeat steps 2 and 3 to set the finishing time.
WMA or
order
Sleep timer
The SLEEP timer can turn the unit off after a set time.
Press [SLEEP] to turn the SLEEP function on/off.
• Each time you press the button:
30MIN
90MIN
60MIN
OFF (Canceled)
120MIN
g To check the remaining time
To
Action
Change the settings
Repeat steps 1 to 4 and 6.
Change the source or
volume
 Press [zPLAY] to clear zPLAY indicator
from the display.
 Make changes to the source or volume.
 Perform steps 5 and 6.
Check the settings
(when the unit is on or
in standby mode)
Press [CLOCK/TIMER] repeatedly to select
zPLAY.
Cancel
Press [zPLAY] to clear the timer indicator
from the display.
Press [SLEEP] once
Note
The play timer and sleep timer can be used together. The sleep timer
always has priority. Be sure not to overlap timer settings.
Note
• The timer will start at the preset time, with the volume increasing
gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while the timer is functioning, the
finish time setting will not be activated.
• When music port is selected as the source when the timer comes
on, the system turns on and engages music port as the source. If
you wish to playback from the portable audio equipment, activate the
equipment’s play mode and increase the volume. (See the portable
audio equipment’s instruction manual.)
Sound adjustment
Sound quality
Enhancing the bass
You can choose one of four types of sound quality.
Press [PRESET EQ] to select the sound quality.
• Each time you press the button:
HEAVY
(Adds punch to
rock)
CLEAR
(Clarifies higher
sounds)
EQ-OFF
(Canceled)
EQ
SOFT
(For background
music)
VOCAL
(Adds gloss to vocals)
Live Virtualizer
You can create a three-dimensional sound field when listening to stereo
sound.
Press [SURROUND] to turn the Live Virtualizer on/off.
Note
The actual effect depends on the source played.
SC-EN36_EB (RQTX0143)_B5.indd 7
Enables you to enjoy the powerful bass effect.
Press [D.BASS] to turn the D.BASS function on/off.
Note
The actual effect depends on the disc.
Re-master Enjoying more natural sound
MP3
Digital remaster is effective on CD (MP3)
Analog remaster is effective on Music Port
This feature reproduces the frequencies lost during recording to give you
a sound closer to the original.
Press [REMASTER] during play to select “RE-MASTER ON”.
• Each time you press the button:
RE-MASTER ON
RQTX0143
red
To activate the timer
 Press [zPLAY] to turn on the timer.
 Press [^] to turn off the unit.
7
RE-MASTER OFF
2/27/2008 3:33:15 PM
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about any of the check points, or if the solutions indicated in the chart
do not solve the problem, consult your dealer for instructions.
No play.
MP3 cannot be read.
Sound is unfixed, reversed or
comes from one speaker only.
No sound or there is a lot of
noise.
•
•
•
•
•
•
The disc isn’t correctly set.
The disc is scratched or dirty. (Tracks skipped.)
There is moisture on the lens. Wait for about an hour and then try again.
You may not be able to play MP3 if you have copied a multi-session disc that has no data between sessions.
When creating a multi session disc, it is necessary to close the session.
The amount of data on the disc is too small. Set the amount of data to greater than approximately 5 MB.
• Check the speaker connections. (➡ page 4)
•
•
•
•
Noise may occur when playing MP3 if recording quality is poor.
Keep this unit away from mobile telephones if the interference is apparent.
Turn the volume up.
Switch the unit off, determine and correct the cause, then switch the unit on. Causes include shorting of the
positive and negative speaker wires, straining of the speakers through excessive volume or power, and using
the unit in a hot environment.
Humming heard during play.
• An AC mains lead or fluorescent light is near the cords. Keep other appliances and cords away from this unit’s
cables.
A beat sound or noise is heard
while receiving a radio broadcast.
• Switch the TV or other audio player off or separate it from the unit.
• Switch off the portable audio player connected to “MUSIC PORT”.
A low hum or noise is heard
during AM broadcasts.
• Keep the antenna away from other cables and cords.
• Keep the AM antenna away from the unit.
The picture on the television near
the set disappears or stripes
appear on the screen.
• The location and orientation of the antenna are incorrect.
• The television antenna wire is too close to the unit. Separate the antenna wire of the television from the unit.
Remote control doesn’t work.
• Check that the batteries are inserted correctly. (➡ page 3)
• Replace the batteries if they are worn.
Display
--:--
• You plugged the AC mains lead in for the first time and there was a power failure recently. Set the time.
(➡ page 7)
PGM FULL
• The number of programmed tracks is limited to 24. No further tracks can be programmed.
NO PLAY
• A CD-ROM disc that is not CD-DA or MP3 format is inserted. It cannot be played.
ERROR
• Incorrect operation performed. Read the instructions and try again.
F76
• There is a power supply problem. Consult the dealer.
Changing the main unit and remote control mode
The remote control and main unit are factory-set to “REMOTE 1” mode.
If your remote control affects other equipment during operation, you can
switch to operate in “REMOTE 2” mode.
To return to “REMOTE 1” mode
Perform steps 1 and 2 but use [1] instead of [2] for both steps.
(“REMOTE 1” appears on the main unit during step 1.)
To switch to “REMOTE 2” mode
 (While pressing and holding [MUSIC P.] on the main unit)
Press and hold [2] until “REMOTE 2” appears on the main unit
display.
 Press and hold [ENTER] and [2] for at least 2 seconds.
The main unit and remote control are now set to operate in “REMOTE
2” mode.
The remote control cannot work with the main unit if their modes are
different.
“REMOTE 1” or “REMOTE 2” appears on the main unit when you operate
the remote control.*
* If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)
Press and hold [ENTER] and [1] on the remote control for at least 2
seconds.
If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)
Press and hold [ENTER] and [2] on the remote control for at least 2
seconds.
Maintenance
RQTX0143
■ If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
8
SC-EN36_EB (RQTX0143)_B5.indd 8
For you
This ap
safety a
A 5-am
Should
fuse ha
by BS136
ASTA
Check
forfo
Check
Check
If the p
refitted
If you lo
cover is
A repla
CAUT
IF THE
OUTL
AND T
THER
OFF P
If a new
If in an
IMPOR
The wir
code:
Blue: N
As thes
the term
The wir
marked
The wir
is mark
■ Care of the CD lens
WARN
TERMI
EARTH
TERMINAL WHICH
• Clean the lens regularly to prevent malfunctions. Use a blower
to remove
SYMBO
E, BY THE EARTH SYMBO
dust and a cotton swab if it is extremely dirty.
THIS P
Recommended product: Lens cleaner kit (part no. SZZP1038C).
Before
• Do not use the lens cleaner of the CD type.
Remov
2/27/2008 3:33:16 PM
Specifications
chart
s.
he
sing
unit’s
g AMPLIFIER SECTION
RMS OUTPUT POWER both channel driven
simultaneously
10 % total harmonic distortion (THD)
1 kHz
3 W per channel (6 Ω)
Input Music Port
Sensitivity
100 mV, 15 kΩ
Terminal
Stereo, 3.5 mm jack
Output Headphone
Terminal
Stereo, 3.5 mm jack
(16 Ω to 32 Ω)
g TUNER SECTION
FM
Frequency range
87.50 MHz to 108.00 MHz (50 kHz)
AM
Frequency range
522 kHz to 1629 kHz (9 kHz)
520 kHz to 1630 kHz (10 kHz)
g CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
Sampling frequency
CD
44.1 kHz
MP3
32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3
32 kbps to 384 kbps
Decoding
16/20/24 bit linear
Pick up
Wavelength
785 nm
Laser power
CLASS 1
(For Norge)
Bølgelengde
785 nm
Laserstyrke
Ingen farlig stråling sendes ut
(med sikkerhets-beskyttelse)
Audio Output (Disc)
Number of channels
2 channel
Audio performance
Frequency response (CD-Audio)
20 Hz to 20 kHz
Wow and flutter
Below measurement limit
Digital filter
8
D/A converter
MASH (1 bit DAC)
g SPEAKER SECTION
Type 1 way, 1 speaker system (Bass reflex)
Speaker (s)
Full Range Speaker
7 cm cone type
Impedance
6Ω
Input power (IEC)
3 W (Max)
Dimensions (W x H x D)
120 mm x 202.8 mm x 133.5 mm
g GENERAL
Power supply
AC 230 to 240 V, 50 Hz
Power consumption
30 W
Dimensions (W x H x D)
252.5 mm x 202.8 mm x 133.5 mm
Mass
With speakers
Approx. 3.20 kg
Without speakers
Approx. 1.90 kg
Operating temperature range
0 °C to +40 °C
Operating humidity range
35 % to 80 % RH (no condensation)
Power consumption in standby mode:
2.6 W (approx.)
Notes:
• Specifications are subject to change without
notice.
• Total harmonic distortion is measured by the
digital spectrum analyzer.
nit.
erate
2
2
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to
by BS1362.
ASTA or BSI to BS1362.
Check
forfor
the
ASTA
mark
the
BSI
mark
the
body
Check
forthe
the
ASTA
mark oror
the
BSI
mark
onon
the
body
ofof
the
Check
ASTA
mark
the
BSI
mark on
the
body
of fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED
AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures
A and B). Confirm the AC mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. 1.
Open
thethe
fusefuse
covercover
with awith
screwdriver.
Open
a screwdriver.
��������
���������
����������
Replace
and close
or attach
fuse cover.
2. 2.
Replace
the the
fusefuse
and close
or attach
the fusethe
cover.
2. Replace the fuse and close or attach the fuse cover.
��������
��������
������
����������
����
����������
If a new plug is to be fitted please observe the wiring code as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following
code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Blue must be connected to the terminal which is
marked with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be connected to the terminal which
is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH
TERMINAL
IS MARKED
WITH
THE LETTER E, BY THE EARTH
H TERMINAL WHICH
IS WHICH
MARKED
WITH THE
LETTER
SYMBOL
GREEN
OR OR
GREEN/YELLOW.
THE EARTH SYMBOL
OR COLOURED
COLOURED
GREEN
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
Before use
Remove the connector cover.
� Sales and Support Information
Customer Care Centre
• For UK customers: 0844 844 3852
• For the Republic of Ireland customers: 01 289 8333
• Visit our website for product information
• E-mail: [email protected]
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product with ease
and confidence by phoning our Customer Care Centre Monday-Friday
9:00am-5:30pm. (Excluding public holidays)
• Or go on line through our Internet Accessory ordering application at
www.panasonic.co.uk
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly
by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of
finished products, take a browse on our website for further details.
Interested in purchasing an extended guarantee?
Please call 0870 240 6284 or visit our website
www.panasonic.co.uk/guarantee.
SC-EN36_EB (RQTX0143)_B5.indd 9
RQTX0143
s are
Caution for AC Mains Lead
9
2/27/2008 3:33:17 PM
SUOMI
VAROITUS!
LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE.
VAROITUS!
• ÄLÄ ASENNA TAI LAITA TÄTÄ LAITETTA
KABINETTITYYPPISEEN KIRJAKAAPPIIN TAI MUUHUN
SULJETTUUN TILAAN, JOTTA TUULETUS ONNISTUISI.
VARMISTA, ETTÄ VERHO TAI MIKÄÄN MUU MATERIAALI
EI HUONONNA TUULETUSTA, JOTTA VÄLTETTÄISIIN
YLIKUUMENEMISESTA JOHTUVA SÄHKÖISKU- TAI
TULIPALOVAARA.
• ÄLÄ PEITÄ LAITTEEN TUULETUSAUKKOJA
SANOMALEHDELLÄ, PÖYTÄLIINALLA, VERHOLLA TAI
MUULLA VASTAAVALLA ESINEELLÄ.
• ÄLÄ ASETA PALAVAA KYNTTILÄÄ TAI MUUTA
AVOTULEN LÄHDETTÄ LAITTEEN PÄÄLLE.
• HÄVITÄ PARISTOT LUONTOA
VAHINGOITTAMATTOMALLA TAVALLA.
VAROITUS:
VÄHENNÄ TULIPALON, SÄHKÖISKUN TAI LAITTEISTON
VAHINGOITTUMISEN VAARAA
• TÄTÄ LAITETTA EI SAA ALTISTAA SATEELLE,
KOSTEUDELLE, ROISKEILLE TAI TIPPUVILLE
NESTEILLE. LAITTEEN PÄÄLLE EI SAA MYÖSKÄÄN
ASETTAA MITÄÄN NESTEELLÄ TÄYTETTYÄ ESINETTÄ,
KUTEN MALJAKKOA.
• KÄYTÄ VAIN SUOSITELTUJA LISÄVARUSTEITA.
• ÄLÄ IRROTA KANTTA (TAI TAUSTAA). SISÄLLÄ EI
OLE KÄYTTÄJÄN HUOLLETTAVISSA OLEVIA OSIA.
HUOLLON SAA SUORITTAA VAIN AMMATTITAITOINEN
HENKILÖKUNTA.
Pistorasia tulee asentaa laitteen lähelle helppopääsyiseen
paikkaan.
Verkkojohdon pistokkeen on oltava aina helposti käytettävissä.
Tämä laite voidaan kytkeä kokonaan irti verkkovirrasta
irrottamalla verkkojohdon pistoke pistorasiasta.
TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI
LEUDOSSA ILMASTOSSA.
ADVARSEL!
DETTE PRODUKTET ANVENDER EN LASER.
BETJENING AV KONTROLLER, JUSTERINGER ELLER
ANDRE INNGREP ENN DE SOM ER BESKREVET I DENNE
BRUKSANVISNING, KAN FØRE TIL FARLIG BESTRÅLING.
DEKSLER MÅ IKKE ÅPNES, OG FORSØK ALDRI Å
REPARERE APPARATET PÅ EGENHÅND. ALT SERVICE OG
REPARASJONSARBEID MÅ UTFØRES AV KVALIFISERT
PERSONELL.
ADVARSEL!
• APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE,
ET INNEBYGGET KABINETT ELLER ET ANNET
LUKKET STED HVOR VENTILASJONSFORHOLDENE
ER UTILSTREKKELIGE. SØRG FOR AT
GARDINER ELLER LIGNENDE IKKE FORVERRER
VENTILASJONSFORHOLDENE, SÅ RISIKO FOR
ELEKTRISK SJOKK ELLER BRANN FORÅRSAKET AV
OVERHETING UNNGÅS.
• APPARATETS VENTILASJONSÅPNINGER MÅ IKKE
DEKKES TIL MED AVISER, BORDDUKER, GARDINER OG
LIGNENDE.
• PLASSER IKKE ÅPEN ILD, SLIK SOM LEVENDE LYS,
OPPÅ APPARATET.
• BRUKTE BATTERIER MÅ KASSERES UTEN FARE FOR
MILJØET.
ADVARSEL:
FØLG NEDENSTÅENDE INSTRUKSER FOR Å REDUSERE
RISIKOEN FOR BRANN, ELEKTRISK STØT OG SKADE PÅ
PRODUKTET:
• DETTE APPARATET MÅ IKKE UTSETTES FOR REGN,
FUKTIGHET, DRYPP ELLER SPRUT, OG INGEN
VÆSKEFYLTE GJENSTANDER, SOM F.EKS. VASER, MÅ
PLASSERES PÅ APPARATET.
• BRUK KUN ANBEFALT TILBEHØR.
• IKKE FJERN DEKSELET (ELLER BAKSIDEN);
APPARATET INNEHOLDER INGEN DELER SOM KAN
SKIFTES ELLER REPARERES AV BRUKEREN. OVERLAT
TIL KVALIFISERTE SERVICETEKNIKERE Å UTFØRE
SERVICE.
Strømuttaket må befinne seg i nærheten av utstyret og være lett
tilgjengelig.
Støpslet på strømkabelen må være klart til bruk.
Når dette apparatet skal kobles helt fra strømnettet (AC), må
støpslet på strømkabelen trekkes ut av stikkontakten.
DETTE APPARATET ER BEREGNET TIL BRUK UNDER
MODERATE KLIMAFORHOLD.
RQTX0143
Pursuant to at the directive 2004/108/EC, article 9 (2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany
NORSK
10
SC-EN36_EB (RQTX0143)_B5.indd 10
2/27/2008 3:33:17 PM
RQTX0143
11
SC-EN36_EB (RQTX0143)_B5.indd 11
2/27/2008 3:33:17 PM
Matsushita Electric Industrial Co., Ltd.
Web Site: http://panasonic.net
En
RQTX0143-1B
H0208VC1038
SC-EN36_EB (RQTX0143)_B5.indd 12
2/27/2008 3:33:17 PM