Pyramid 42320 Analog Clock Wall Brackets Wall Clock Accessories Instructions
Add to My manuals4 Pages
Pyramid 42320 Analog Clock Wall Brackets are designed to securely wall-mount two TimeTrax™ Sync 13in analog wall clocks back to back, allowing visibility from two directions. Ideal for hallways or expansive areas, the anti-theft security brackets provide quick and easy installation. Featuring two wire chases, the bracket effortlessly conceals clock wiring to an electrical work box. The included release key enables convenient clock removal when necessary. Constructed from heavy-duty steel with a black powder-coated finish, these brackets offer durability and a sleek appearance.
advertisement
▼
Scroll to page 2
of
4
TIMETRAX™ SYNC DUAL 13in ANALOG CLOCK WALL BRACKET Installation Instructions 42320 OVERVIEW Thank you for choosing a TimeTrax™ Sync Dual Analog Clock Wall Bracket (42320). This bracket kit is used to wallmount two TimeTrax™ Sync 13in analog wall clocks back to back, allowing visibility from two directions in a hallway or expansive area. The anti-theft security brackets (included) provide quick installation to the dual clock wall-mount kit. The dual clock bracket features two wire chases making it easy to run and conceal clock wiring to an electrical work box (bracket mounting plate fits a standard 4in x 4in electrical work box). IMPORTANT: WIRING SHOULD BE COMPLETED PER ELECTRICAL CODE AND PERFORMED BY A LICENSED ELECTRICIAN. For more information, visit pyramidtimesystems.com or call our technical support team at 888.479.7264 during regular business hours: 8am-5pm EST, M-F. KIT CONTENTS Dual Security Bracket Security Bracket Release Key Dual Clock Wall Bracket ASSEMBLY & INSTALLATION ASSEMBLY/INSTALLATION Place one analog clock face down on flat surface. Position the Dual Clock Wall Bracket so that the flange and wiring chase tubes sit within the corresponding cavity on the back of the clock. If using bracket with battery operated analog clock, skip ahead to part two of step four. Connect green wire from clock to the available grounding screw located on the Dual Security Bracket. Route black and white wires through wire chase tube until they exit the opposite end of the bracket. Tuck all wires inside wire housing cavity on back of clock and connect Dual Security Bracket to clock by aligning four tabs on bracket with the four matching slots on back of clock. Slide the security bracket upward until bracket locks into place. ETHERNET I2249 Page 1 of 4 888.479.7264 pyramidtimesystem.com TIMETRAX™ SYNC DUAL 13in ANALOG CLOCK WALL BRACKET Installation Instructions 42320 ASSEMBLY/INSTALLATION (cont.) Connect the green wire from the second clock to the grounding screw on the opposite side of the bracket. Route the black and white wires from the second clock, along with the pre-connected green grounding wire into the remaining wire chase tube until they exit the opposite end of the bracket. Position the clocks back to back while tucking the wires of the second clock into wire housing cavity on back of clock. Align the four slots on back of second clock with the four matching tabs on security bracket. With clocks back to back, push second clock downward onto bracket until it locks into place. Both clocks are now securely attached to the Dual Clock Wall Bracket. Connect the green grounding wire from the clock assembly and the green grounding wire from electrical work box to the grounding screw located on inside of the Dual Wall Bracket mounting plate. Wire nut the black wires from both clocks to the line wire from electrical box. Wire nut the white wires from both clocks to the neutral wire from electrical work box. Tuck all wires into the electrical work box. Attach the clocks and bracket assembly to standard 4in x 4in electrical work box with #6-32 screws (not included). ETHERNET I2249 Page 2 of 4 888.479.7264 pyramidtimesystem.com TIMETRAX™ SYNC DUAL 13in ANALOG CLOCK WALL BRACKET Installation Instructions 42320 REMOVING CLOCKS To remove clock or clocks from Dual Wall Bracket, insert provided release key into slot located on top/ back of either clock. Push key all the way into slot. Key will side easily until some resistance from locking tab is felt. With key fully engaged, slide the security bracket up and off of the clock. I2249 Page 3 of 4 888.479.7264 pyramidtimesystem.com TIMETRAX™ SYNC DUAL 13in ANALOG CLOCK WALL BRACKET Installation Instructions 42320 SPECIFICATIONS Construction Heavy Duty Steel Finish Black Powder Coated Mounting Wall Warranty 3-Year manufacturer’s limited warranty Guarantee 30-Day money back guarantee Includes Dual Digital Clock Wall Bracket, Double-sided Security Bracket, Release Key SIZE Dimensions 5.5inW x 5.5inH x11.625inD (13.97cm x 13.97cm x 29.52cm) Weight 1.95lbs(.884kg) Shipping Weight 2.75lbs (1.24kg) ADDITIONAL CLOCK ACCESSORIES PART# DESCRIPTION 42320 Dual Analog Clock Wall Bracket (13in) 42321 Dual Digital Clock Wall Bracket (3x4/2.5x6/4x4) 42422 Dual Digital Clock Wall Bracket (4x6) 42443 Dual Clock Ceiling Bracket 42314 Dual 13in Analog Clock Chrome Wire Guard 42315 Dual 17in Analog Clock Chrome Wire Guard 42316 4in x 6 digit Digital Clock Chrome Wire Guard 42400 4in x 4 digit Digital Clock Chrome Wire Guard 42401 2.5in x 6 digit Digital Clock Chrome Wire Guard 42690 13in Analog Clock Wash Down Enclosure 42689 Digital Clock Wash Down Enclosure 42247 Digital Security Mount Replacement 42281 Wall Clock Security Mount Replacement Key I2249 Page 4 of 4 888.479.7264 pyramidtimesystem.com
advertisement
Related manuals
advertisement