What’s in the Box?

PART NO.

QTY DESCRIPTION

UX-TXPLUS

UX-RXPLUS

Power Supply

1 WUXGA, USB 1.1, CAT5 Transmitter

1 WUXGA, USB 1.1, CAT5 Receiver

2 PS5VDC2A

Technical Specifications

*

VIDEO

Format

Resolution

RGBHV, RGsB, YUV, Y/C, CVBS

Up to 1920 x 1200 VGA, SVGA, XGA, SXGA, UXGA,

WUXGA

(1) HD-15 Male / USB Input Interface (TX)

Output Interface (TX) (1) HD-15 Female (for local display)

Output Interface (RX) (1) HD-15 Female

USB

Signal Type

Input Interface (TX)

USB 1.1

(1) HD-15 Male / VGA

Output Interface (TX) (2) USB Type A (Female) (for local keyboard and mouse)

Output Interface (RX) (2) USB Type A (Female)

OTHER

Power

Dimensions

Weight

Approvals

Operating Temp

Storage Temp.

Humidity

External 100-240 VAC/5VDC2A @10W

5” W x 1” H x 3” D

1 lb

UL, CE, ROHS Compliant

32-131°F (0-55 °C)

-4-185 °F (-20-85 °C)

Up to 95%

ORDER INFO

Part No.

UX-PLUSS

UX-TXPLUS

UX-RXPLUS

Description

WUXGA+USB CAT5 Extender with local monitor and USB keyboard & mouse output. Includes:

[UX-TXPLUS, UX-RXPLUS, CCKVMUSB06 and

2 x PS5VD2A-WLLMNT]

WUXGA, USB 1.1, CAT5 Transmitter.

Includes: [UX-TXPLUS, PS5VD2A-WLLMNT]

WUXGA, USB 1.1, CAT5 Receiver.

Includes: [UX-RXPLUS, PS5VD2A-WLLMNT]

We have simplified the output of the UX-PLUS by consolidating the VGA and USB input into one cable.

© Copyright 2017 SmartAVI, All Rights Reserved

NOTICE

T h e i n f o r m a t i o n c o n t a i n e d i n t h i s d o c u m e n t is subject to change without notice. Smart-AVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for any particular purpose.

Smart-AVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.

No part of this document may be photocopied, reproduced or translated into another language without prior written consent from Smart-AVI.

For more information, visit www.smartavi.com.

Rack Mountable Option

Our SmartRack is the perfect solution to allow virtually all SmartAVI devices to be custom mounted in a standard 19” server rack. The SmartRack is fully adjustable and can secure/organize several devices.

SmartAVI, Inc. / Twitter: @smartavi

2455 W Cheyenne Ave, Suite 112

North Las Vegas, NV 89032 http://www.SmartAVI.com

Installation

Manual

UX-PLUS

USB KVM Extender

with support for Local Displayr

Extend and Split WUXGA Video and USB 1.1 Keyboard and Mouse up to 500 ft over CAT5 Cable

www.smartavi.com

Introduction

The UX-PLUS is a cross-platform WUXGA and USB KVM switch capable of sharing one computer between two consoles, one local and one remote.

Features

• Supports WUXGA video extension for resolutions up to 1920 x 1200

• Local WUXGA output for a local display

• Plug and play, no software required

• Fully compliant with USB 1.1 specifications for

Keyboard and Mouse

• Built-in skew compensation

• Uses a single CAT5 UTP cable up to 500 feet

• External power adapter for transmitter and receiver unit

• Fully transparent (does not use any emulation)

Application

• Security

• PC Networking

• Conference Center Systems

• Point of Sale

• Camera Surveillance

• Video Phone

• Control Room Systems

• Recording Studio

• PC KVM Extension

• MAC Keyboard Mouse Extender

In the medical or industrial field, where it may not be practical (or safe) to have one or more CPUs in the general vicinity, SmartAVI’s VNET Switch Series is the perfect solution, allowing for either PC or Mac signals to be extended from computer to the display

Product - Installation Diagram

Installation

1. Turn off the computer and displays

2. Connect the VGA/USB cable from the computer into the VGA/USB connector on the UX-PLUS transmitter

3. Connect the local display to the VGA connector on the UX-PLUS transmitter.

4. Connect the local USB keyboard and mouse to the USB connectors on the UX-PLUS transmitter.

5. Connect the remote display to the VGA connector on the UX-PLUS receiver

6. Connect the remote USB keyboard and mouse to the USB connectors on the UX-PLUS receiver.

7. Connect the power cord to both the UX-PLUS transmitter and receiver.

8. Power on the computers and the display.

UX-TXPLUS Front UX-RXPLUS Front

UX-TXPLUS Rear UX-RXPLUS Rear