BenQ PU9730 PROJECTOR Guide
Add to My manuals15 Pages
BenQ PU9730 is a high-performance projector that offers a range of features for both business and home use. With its high brightness and resolution, it delivers sharp and detailed images even in well-lit rooms. The projector also has a variety of connectivity options, including HDMI, VGA, and USB, making it easy to connect to a variety of devices. Additionally, the BenQ PU9730 has a number of features that make it easy to use, such as a remote control and an intuitive on-screen menu.
advertisement
▼
Scroll to page 2
of
15
PU9730/PW9620/PX9710 Projector RS232 Command Control Installation Guide Table of Contents Introduction ............................................................................................................................................. 3 Wire arrangement........................................................................................................................................................ 3 RS232 pin assignment .................................................................................................................................................. 3 Connections and communication settings ......................................................................................... 4 RS232 serial port with a straight cable.................................................................................................................... 4 Settings .................................................................................................................................................................. 4 RS232 via LAN .............................................................................................................................................................. 6 Settings .................................................................................................................................................................. 6 RS232 via HDBaseT ..................................................................................................................................................... 6 Settings .................................................................................................................................................................. 6 Command table ....................................................................................................................................... 8 2 Introduction The document describes how to control your BenQ projector via RS232 from a computer. Follow the procedures to complete the connection and settings first, and refer to the command table for RS232 commands. Available functions and commands vary by model. Check the specifications and user manual of the purchased projector for product functions. Wire arrangement Wire Arrangement P1 Color P2 1 Black 1 2 Brown 3 3 Red 2 4 Orange 4 5 Yellow 5 6 Green 6 7 Blue 7 8 Purple 8 9 Gray 9 Case Drain wire Case RS232 pin assignment Pin Description Pin Description 1 NC 2 RXD 3 TXD 4 NC 5 GND 6 NC 7 RTS 8 CTS 9 NC 3 Connections and communication settings Choose one of the connections and set up properly before RS232 control. RS232 serial port with a straight cable D-Sub port (male or female) on a projector D-Sub 9 pin (female) PC or laptop D-Sub 9 pin (male) D-Sub 9 pin Communication cable (straight) Settings On-screen images in this document are for reference only. The screens may vary depending on your Operating System, I/O ports used for connection, and the specifications of the connected projector. 1. Determine the COM Port name used for the RS232 communications in Device Manager. 4 2. Choose Serial and the corresponding COM port as the communication port. In this given example, COM6 is selected. 3. Finish Serial port setup. Baud rate 9600 / 14400 / 19200 / 38400 / 57600 / 115200 bps Check the baud rate of the connected projector from its OSD menu. Data length 8 bit Parity check None Stop bit 1 bit Flow control None 5 RS232 via LAN RJ45 port on a projector PC or laptop LAN cable Settings 1. Find the Wired LAN IP address of the connected projector from the OSD menu and make sure the projector and the computer are within the same network. 2. Input 8000 in the TCP port # field. RS232 via HDBaseT HDBaseT compatible device D-Sub 9 pin RJ45 port on a projector RJ45 PC or laptop D-Sub 9 pin LAN cable Settings 1. Determine the COM Port name used for the RS232 communications in Device Manager. 2. Choose Serial and the corresponding COM port as the communication port. In this given example, COM6 is selected. 6 3. Finish Serial port setup. Baud rate 9600 / 14400 / 19200 / 38400 / 57600 / 115200 bps Check the baud rate of the connected projector from its OSD menu. Data length 8 bit Parity check None Stop bit 1 bit Flow control None 7 Command table Available features differ by projector specification, input sources, settings, etc.. Commands are working if the standby power is 0.5W or a supported baud rate of the projector is set. Uppercase, lowercase, and a mixture of both types of characters are accepted for a command. If a command format is illegal, it will echo Illegal format. If a command with correct format is not valid for the projector model, it will echo Unsupported item. If a command with correct format cannot be executed under certain condition, it will echo Block item. If RS232 control is performed via LAN, a command works whether it starts and ends with <CR>. All the commands and behaviors are identical with the control through a serial port. Function Lens Load Power Type Operation ASCII Write Lens load memory 1 <CR>*lensload=m1#<CR> YES Write Lens load memory 2 <CR>*lensload=m2#<CR> YES Write Lens load memory 3 <CR>*lensload=m3#<CR> YES Write Lens load memory 4 <CR>*lensload=m4#<CR> YES Write Lens load memory 5 <CR>*lensload=m5#<CR> YES Write Lens load memory 6 <CR>*lensload=m6#<CR> YES Write Lens load memory 7 <CR>*lensload=m7#<CR> YES Write Lens load memory 8 <CR>*lensload=m8#<CR> YES Write Lens load memory 9 <CR>*lensload=m9#<CR> YES Write Lens load memory 10 <CR>*lensload=m10#<CR> YES Write save Lens memory 1 <CR>*lenssave=m1#<CR> YES Write save Lens memory 2 <CR>*lenssave=m2#<CR> YES Write save Lens memory 3 <CR>*lenssave=m3#<CR> YES Write save Lens memory 4 <CR>*lenssave=m4#<CR> YES Write save Lens memory 5 <CR>*lenssave=m5#<CR> YES Write save Lens memory 6 <CR>*lenssave=m6#<CR> YES Write save Lens memory 7 <CR>*lenssave=m7#<CR> YES Write save Lens memory 8 <CR>*lenssave=m8#<CR> YES Write save Lens memory 9 <CR>*lenssave=m9#<CR> YES Write save Lens memory 10 <CR>*lenssave=m10#<CR> YES Write Reset Lens to center <CR>*lensreset=center#<CR> YES Write Power On <CR>*pow=on#<CR> YES Write Power off <CR>*pow=off#<CR> YES Read Power Status <CR>*pow=?#<CR> YES Write COMPUTER/YPbPr <CR>*sour=RGB#<CR> YES COMPUTER 2/YPbPr2 <CR>*sour=RGB2#<CR> YES Component <CR>*sour=YPbr#<CR> YES Source Selection Write Write 8 Support Write Component2 <CR>*sour=ypbr2#<CR> NO Write DVI-A <CR>*sour=dviA#<CR> NO Write DVI-D <CR>*sour=dvid#<CR> YES Write HDMI <CR>*sour=hdmi#<CR> YES Write HDMI 2 <CR>*sour=hdmi2#<CR> NO Write Composite <CR>*sour=vid#<CR> YES Write S-Video <CR>*sour=svid#<CR> YES Write Network <CR>*sour=network#<CR> NO Write USB Display <CR>*sour=usbdisplay#<CR> NO Write USB Reader <CR>*sour=usbreader#<CR> NO Write Wireless <CR>*sour=wireless#<CR> NO Write DisplayPort <CR>*sour=dp#<CR> NO Write HD Connect <CR>*sour=hdconnect#<CR> NO Write HDBaseT <CR>*sour=hdbaset#<CR> YES Read Current source <CR>*sour=?#<CR> YES Write Mute On <CR>*mute=on#<CR> NO Write Mute Off <CR>*mute=off#<CR> NO Read Mute Status <CR>*mute=?#<CR> NO Write Volume + <CR>*vol=+#<CR> NO Write Volume - <CR>*vol=-#<CR> NO Read Volume Status <CR>*vol=?#<CR> NO Write Mic. Volume + <CR>*micvol=+#<CR> NO Write Mic. Volume - <CR>*micvol=-#<CR> NO Read Mic. Volume Status <CR>*micvol=?#<CR> NO Write Audio pass Through off <CR>*audiosour=off#<CR> NO Write Audio-Computer1 <CR>*audiosour=RGB#<CR> NO Write Audio-Computer2 <CR>*audiosour=RGB2#<CR> NO Audio source Write Audio-Video/S-Video <CR>*audiosour=vid#<CR> NO select Write Audio-Component <CR>*audiosour=ypbr#<CR> NO Write Audio-HDMI <CR>*audiosour=hdmi#<CR> NO Write Audio-HDMI2 <CR>*audiosour=hdmi2#<CR> NO Read Audio pass Status <CR>*audiosour=?#<CR> NO Write Dynamic <CR>*appmod=dynamic#<CR> NO Write Presentation <CR>*appmod=preset#<CR> YES Write sRGB <CR>*appmod=srgb#<CR> NO Write Bright <CR>*appmod=bright#<CR> YES Write Living Room <CR>*appmod=livingroom#<CR> NO Write Game <CR>*appmod=game#<CR> NO Audio Control Picture Mode 9 Picture Setting Write Cinema <CR>*appmod=cine#<CR> YES Write Standard <CR>*appmod=std#<CR> NO Write User1 <CR>*appmod=user1#<CR> NO Write User2 <CR>*appmod=user2#<CR> NO Write User3 <CR>*appmod=user3#<CR> NO Write ISF Day <CR>*appmod=isfday#<CR> NO Write ISF Night <CR>*appmod=isfnight#<CR> NO Write 3D <CR>*appmod=threed#<CR> NO Read Picture Mode <CR>*appmod=?#<CR> YES Write Contrast + <CR>*con=+#<CR> YES Write Contrast - <CR>*con=-#<CR> YES Read Contrast value <CR>*con=?#<CR> YES Write Brightness + <CR>*bri=+#<CR> YES Write Brightness - <CR>*bri=-#<CR> YES Read Brightness value <CR>*bri=?#<CR> YES Write Color + <CR>*color=+#<CR> YES Write Color - <CR>*color=-#<CR> YES Read Color value <CR>*color=?#<CR> YES Write Sharpness + <CR>*sharp=+#<CR> YES Write Sharpness - <CR>*sharp=-#<CR> YES Read Sharpness value <CR>*sharp=?#<CR> YES Write Color Temperature-Warmer <CR>*ct=warmer#<CR> NO Write Color Temperature-Warm <CR>*ct=warm#<CR> YES Write Color Temperature-Normal <CR>*ct=normal#<CR> YES Write Color Temperature-Cool <CR>*ct=cool#<CR> YES Write Color Temperature-Cooler <CR>*ct=cooler#<CR> NO Write Color Temperature-lamp native <CR>*ct=native#<CR> YES Read Color Temperature Status <CR>*ct=?#<CR> YES Write Aspect 4:3 <CR>*asp=4:3#<CR> YES Write Aspect 16:9 <CR>*asp=16:9#<CR> YES Write Aspect 16:10 <CR>*asp=16:10#<CR> YES Write Aspect Auto <CR>*asp=AUTO#<CR> YES Write Aspect Real <CR>*asp=REAL#<CR> YES Write Aspect Letterbox <CR>*asp=LBOX#<CR> NO Write Aspect Wide <CR>*asp=WIDE#<CR> NO Write Aspect Anamorphic <CR>*asp=ANAM#<CR> NO Write Aspect 5:4 <CR>*asp=5:4#<CR> YES Write Aspect 1.88 <CR>*asp=1.88:1#<CR> YES 10 Write Aspect 2.35 <CR>*asp=2.35:1#<CR> YES Read Aspect Status <CR>*asp=?#<CR> YES Write Digital Zoom In <CR>*zoomI#<CR> YES Write Digital Zoom out <CR>*zoomO#<CR> YES Write Auto <CR>*auto#<CR> YES Write Brilliant color on <CR>*BC=on#<CR> NO Write Brilliant color off <CR>*BC=off#<CR> NO Read Brilliant color status <CR>*BC=?#<CR> NO Write Projector Position-Front Table <CR>*pp=FT#<CR> YES Write Projector Position-Rear Table <CR>*pp=RE#<CR> YES Write Projector Position-Rear Ceiling <CR>*pp=RC#<CR> YES Write Projector Position-Front Ceiling <CR>*pp=FC#<CR> YES Write Projector Position-up Front <CR>*pp=UF#<CR> NO Write Projector Position-down Front <CR>*pp=DF#<CR> NO Read Projector Position Status <CR>*pp=?#<CR> YES Write Quick auto search on <CR>*QAS=on#<CR> YES Write Quick auto search off <CR>*QAS=off#<CR> YES Read Quick auto search status <CR>*QAS=?#<CR> YES Write Direct Power On-on <CR>*directpower=on#<CR> YES Write Direct Power On-off <CR>*directpower=off#<CR> YES Read Direct Power On-Status <CR>*directpower=?#<CR> YES Write Signal Power On-on <CR>*autopower=on#<CR> NO Operation Write Signal Power On-off <CR>*autopower=off#<CR> NO Settings Read Signal Power On-Status <CR>*autopower=?#<CR> NO Write Standby Settings-Standard <CR>*standbynet=standard#<CR> YES Write Standby Settings-Eco <CR>*standbynet=eco#<CR> YES Write Standby Settings-Network <CR>*standbynet=network#<CR> YES Write Standby Settings-Network on <CR>*standbynet=on#<CR> NO Write Standby Settings-Network off <CR>*standbynet=off#<CR> NO Read Standby Settings-Network Status <CR>*standbynet=?#<CR> YES Write Standby Settings-Microphone on <CR>*standbymic=on#<CR> NO Write Standby Settings-Microphone off <CR>*standbymic=off#<CR> NO Read Standby Settings-Microphone <CR>*standbymic=?#<CR> Status NO Write Standby Settings-Monitor Out on <CR>*standbymnt=on#<CR> NO Write Standby Settings-Monitor Out off <CR>*standbymnt=off#<CR> NO Read Standby Settings-Monitor Out <CR>*standbymnt=?#<CR> Status 11 NO Lamp Control Miscellaneous Write 2400 <CR>*baud=2400#<CR> NO Write 4800 <CR>*baud=4800#<CR> NO Write 9600 <CR>*baud=9600#<CR> YES Write 14400 <CR>*baud=14400#<CR> YES Write 19200 <CR>*baud=19200#<CR> YES Write 38400 <CR>*baud=38400#<CR> YES Write 57600 <CR>*baud=57600#<CR> YES Write 115200 <CR>*baud=115200#<CR> YES Read Current Baud Rate <CR>*baud=?#<CR> YES Read Lamp Hour <CR>*ltim=?#<CR> YES Read Lamp2 Hour <CR>*ltim2=?#<CR> YES Write Lamp hour reset <CR>*ltim=reset#<CR> YES Write Lamp2 hour reset <CR>*ltim2=reset#<CR> YES Write Normal mode <CR>*lampm=lnor#<CR> YES Write Eco mode <CR>*lampm=eco#<CR> YES Write Dual lamp <CR>*lammd=dual#<CR> YES Write number 1 lamp <CR>*lammd=num1l#<CR> YES Write number 2 lamp <CR>*lammd=num2#<CR> YES Write Single lamp (minimum) <CR>*lammd=single#<CR> YES Read Current Lamp status <CR>*lammd=?#<CR> YES Write Smart Eco mode <CR>*lampm=seco#<CR> NO Write Smart Eco mode(LampCare) <CR>*lampm=seco2#<CR> NO Write Smart Eco mode(IumenCare) <CR>*lampm=seco3#<CR> NO Write Dual Brightest <CR>* lampm =dualbr#<CR> NO Write Dual Reliable <CR>* lampm =dualre#<CR> NO Write Single Alternative <CR>* lampm =single#<CR> NO Write Single Alternative Eco <CR>* lampm =singleeco#<CR> NO Read Lamp Mode Status <CR>*lampm=?#<CR> YES Read Model Name <CR>*modelname=?#<CR> YES Write Blank On <CR>*blank=on#<CR> YES Write Blank Off <CR>*blank=off#<CR> YES Read Blank Status <CR>*blank=?#<CR> YES Write Freeze On <CR>*freeze=on#<CR> YES Write Freeze Off <CR>*freeze=off#<CR> YES Read Freeze Status <CR>*freeze=?#<CR> YES Write Menu On <CR>*menu=on#<CR> YES Write Menu Off <CR>*menu=off#<CR> YES Read Menu Status <CR>*menu=?#<CR> YES 12 Write Up <CR>*up#<CR> YES Write Down <CR>*down#<CR> YES Write Right <CR>*right#<CR> YES Write Left <CR>*left#<CR> YES Write Enter <CR>*enter#<CR> YES Write 3D Sync Off <CR>*3d=off#<CR> YES Write 3D Auto <CR>*3d=auto#<CR> YES Write 3D Sync Top Bottom <CR>*3d=tb#<CR> YES Write 3D Sync Frame Sequential <CR>*3d=fs#<CR> YES Write 3D Frame packing <CR>*3d=fp#<CR> NO Write 3D Side by side <CR>*3d=sbs#<CR> YES Write 3D inverter disable <CR>*3d=da#<CR> YES Write 3D inverter <CR>*3d=iv#<CR> YES Write 2D to 3D <CR>*3d=2d3d#<CR> NO Write 3D nVIDIA <CR>*3d=nvidia#<CR> NO Read 3D Sync Status <CR>*3d=?#<CR> YES Write Remote Set <CR>*rrset=0#<CR> NO Read Remote Set Status <CR>*rrset=?#<CR> NO Write Remote Receiver-front+rear <CR>*rr=fr#<CR> NO Write Remote Receiver-front <CR>*rr=f#<CR> NO Write Remote Receiver-rear <CR>*rr=r#<CR> NO Write Remote Receiver-top <CR>*rr=t#<CR> NO Write Remote Receiver-top+front <CR>*rr=tf#<CR> NO Write Remote Receiver-top+rear <CR>*rr=tr#<CR> NO Read Remote Receiver Status <CR>*rr=?#<CR> NO Write Instant On-on <CR>*ins=on#<CR> NO Write Instant On-off <CR>*ins=off#<CR> NO Read Instant On Status <CR>*ins=?#<CR> NO Write Lamp Saver Mode-on <CR>*lpsaver=on#<CR> NO Write Lamp Saver Mode-off <CR>*lpsaver=off#<CR> NO Read Lamp Saver Mode Status <CR>*lpsaver=?#<CR> NO Write Projection Log In Code on <CR>*prjlogincode=on#<CR> NO Write Projection Log In Code off <CR>*prjlogincode=off#<CR> NO Read Projection Log In Code Status <CR>*prjlogincode=?#<CR> NO Write Broadcasting on <CR>*broadcasting=on#<CR> NO Write Broadcasting off <CR>*broadcasting=off#<CR> NO Read Broadcasting Status <CR>*broadcasting=?<CR> NO 13 Write AMX Device Discovery-on <CR>*amxdd=on#<CR> NO Write AMX Device Discovery-off <CR>*amxdd=off#<CR> NO Read AMX Device Discovery Status <CR>*amxdd=?#<CR> NO Read Mac Address <CR>*macaddr=?#<CR> NO Write Trigger on <CR>*trigger=on#<CR> YES Write Trigger off <CR>*trigger=off#<CR> YES Read Trigger status <CR>*trigger=?#<CR> YES Write High Altitude mode on <CR>*Highaltitude=on#<CR> YES Write High Altitude mode off <CR>*Highaltitude=off#<CR> YES Read High Altitude mode status <CR>*Highaltitude=?#<CR> YES Read Error Code <CR>*error=report#<CR> YES Write Serial Number code1 <CR>V99N1234<CR> NO Read Serial Number Query <CR>V99N0000<CR> NO Write Lens Shift Up <CR>*lst=up#<CR> YES Write Lens Shift Down <CR>*lst=down#<CR> YES Write Lens Shift Left <CR>*lst=left#<CR> YES Write Lens Shift Right <CR>*lst=right#<CR> YES Write Focus Plus <CR>*focus=+#<CR> YES Write Focus Minus <CR>*focus=-#<CR> YES Write Zoom Plus <CR>*zoom=+#<CR> YES Write Zoom Minus <CR>*zoom=-#<CR> YES Write Keystone-Vertical Decrease <CR>*keyst=-#<CR> YES Write Keystone-Vertical Increase <CR>*keyst=+#<CR> YES Read Keystone-Vertical Status <CR>*keyst=?#<CR> YES Write AutoSync NA NO Read Get Filter Timer NA NO Write System Reset NA NO Read Get F/W Version NA NO Read Get Tint NA NO Write Set Tint NA NO Read Get Keystone value NA NO Write Set Keystone value NA NO Read Get Messaging NA NO Write Set Messaging NA NO 14 BenQ.com © 2018 BenQ Corporation All rights reserved. Rights of modification reserved. Version: 1.01-S 15
advertisement
Key Features
- Large venue projector Black
- DLP 7000 ANSI lumens
- Lamp 2000 h
- WUXGA (1920x1200) 16:10 2800:1
- Number of colours: 1.073 billion colours
- Zoom capability
- Ethernet LAN
- AC 670 W
Related manuals
advertisement