Micronet SP766W 54M Wireless Print Server Quick Installation Guide

Client Installation and Setup
This wizard will install client utilities and drivers into your PC. It also
adds all Network Ports to your PC automatically.
Before installation, please confirm that your PC has already
connected to the network and installed at least one network
protocol. Please follow the steps below to start installation.
1. Insert the CD shipped along with the print server into your CD
drive. The Autorun.exe program should be executed
automatically. If not, run Autorun.exe manually from CD drive's
root directory.
2. The Installation Manager will be displayed on the screen. Click
Client Installation.
3. The Print Server Utilities window will be displayed. Click "Next".
4. Click "Next" to install the utilities in the default folder or click
"Browse" to specify the destination folder where you would like
to install the utilities.
5. The system will start to install the utilities automatically.
6. Now, the installation procedure is completed, you are ready to
set up the client's computer.
7. All network ports of the Print Servers detected on the network
will be added to your PC automatically, click "Continue".
8. Note that if there is no print server detected on the network
currently, please click "Continue" to finish the installation.
9. The Client Installation procedure is completed. Click "Finish".
C € FE P/N: 2300-0442
Windows Add Printer Procedure
After adding a "Network Port" of the print server to your PC, follow
the procedure described below to add printer to the Windows.
1. Click "Start", choose "Settings" and select "Printers and
Faxes". Click "Add a Printer".
2. The "Add Printer Wizard" is displayed. Click "Next".
3. Select "Local printer attached to this computer" and make
sure that "Automatically detect and install my Plug and Play
printer" is not selected. Click "Next".
4. Choose the suitable "Print Server Network Port" which was
created by the Administrator or Client Installation process and
click "Next".
5. Select a suitable printer manufacturer and the printer model and
click "Next". If your printer is not in the list, click "Have Disk..."
to install the driver of the printer. After installation, the printer
model will be added to the list.
6. Name your printer and setup the default printer, click "Next".
=
. It is recommended to print a test page. Click "Next".
8. You have added the printer to the PC successfully. The
information of the printer is displayed in the windows. Click
"Finish".
Now you can start to print from your PC to the print server. For more
information, please refer the manual on the CD.
6 5300-00001946-00W
Micronet
Foster and Easier Networks
Quick Installation Guide
10/100M Print Server
Model No.: SP755D, SP756, SP756W, SP766, SP766W
http://www.micronet.info
Package Contents
e Print Server
® One Antenna (Only for Wireless Print Server)
e Utility and Manual CD
® Power Adapter
® Quick Installation Guide
Features
® Comply with IEEE 802.3, IEEE 802.3u Wired Ethernet
standards.
® Share printer to all PCs through Ethernet Network.
* Supports TCP/IP, IPX/SPX, NetBEUI and AppleTalk network
protocols.
* Supports LPR, IPP, SMB/TCP, Raw Printing and Unix Logical
printing protocols.
® Supports Peer-to-Peer Printing (TCP/IP/IPX/NetBEUI).
® Supports Server-based printing (Novell NetWare and Windows).
* Compatible with all major operating systems (Windows
95/98/Me/NT/ 2000/XP, NetWare (3.x above), MAC OS and
Unix/Linux).
* Support DHCP Server and Client protocols.
* Supports Web-based management, Windows Configuration
Utility and SNMP Protocol.
* Provides easy-to-use installation, setup and diagnostic
programs.
* Supports Fault-Tolerant Upgrade capability.
Administrator Installation and Setup
1. Insert the CD shipped along with the print server into the CD
drive. The Autorun.exe program should be executed
automatically. If not, run Autorun.exe manually from CD drive's
root directory.
2. The Installation Manager will be displayed on the screen. Click
Administrator Installation.
3. The Print Server Utilities window will be displayed. Click "Next".
4. Click "Next" to install the utilities in the default folder or click
"Change" to specify the destination folder where you would like
to install it. |
5. Select the components you want to install. It is highly
recommended to install all provided components. Click "Next" to
continue.
6. Now, the system will start to install the utilities automatically.
7. You have completed the installation phase and prepare to
configure the Print Server.
Hardware Installation
1. Ensure the printer works properly before connecting to the print
server then turn off the power.
2. Confirm that the network is on appropriate operating condition.
3. Attach the print server to the network.
4. Connect the printer with the printer cable to printer port on the
print server.
5. Turn the printer's power on. The print server will proceed the
self-test automatically.
Note:
1. Configuration problems may result if the print server is powered
up without first establishing its network connection. Please follow
the procedure to avoid complication at the configuration stage.
2. It is recommended to use PS Admin to change the IP
setting. It will prevent from any conflict on the network.
8. The Choose Print Server will list all Print Servers within the
network. The Print Server Name is the last 6-digit of MAC ID
with prefix "PS". Please check the MAC ID on the print server.
Select the Print Server you would like to configure and click
"Next".
9. Specify a recognizable name for the Print Server and click
"Next".
10. Specify the IP Address for the Print Server manually or click
"Next" to keep defaült IP Address.
11. The configuration summary is displayed in the window. Now,
you have completed the Print Server setup. Click "Finish"
and your system will add network port of the Print Server to
your PC automatically.
12. The Administrator Installation procedure is totally completed.
Click "Finish".