Dyconn Faucet DF-820ZA Arial 15-1/2-in H Bidet Installation Guide

 The Product Model:
¢ Thank you for choosing our product.
Intelligent toilet instructions
Contents
EE a [CS RT RR Tere Rp NP |
Safety precautions - --- == === +=... e....... 2
Features guide © ово соо ово осо ооо вое сов ово © 4
* Please read the instructions Installation guide
thoroughly before using the
product.
Bidet installation ..............000000000000 5
Remote holder mounting guide --- --- 8
Using your bidet
Basic operations ==.e........ 9
Preparations before use ............. 9
Bidet usage and remote guide --------- 10
Troubleshooting -.-е.»ееоеооеоооооо ооо 16
Cleaning and Maintenance ------- 17
Appendix
Product specification —------<=.-........ 21
Included parts list-- --- --- ..e.............. 22
Cushion Te
NN Y . .
T Bidet seat lid
Power plug Е
Damper
LED indicator panel
~~
Control panel
Warm air dryer duct
Quick self-heating seat
Rear wash nozzle
Bowl
Front wash nozzle
2.4G wireless remote control —
20000
DOCE
[=]
o
Attention: v > mg
If the specifications, design, and color of the product highlighted in the manual
differs from your purchased product, please call or e-mail Dyconn Faucet for assistance.
»
\ 855-239-2666 [ged [email protected]
p
Safety Precautions
All the safety precautions listed can prevent damage to yourself or your property.
Please read all safety warnings to ensure proper product usage.
A WARNING | Ignoring these warnings may lead to serious injury or death.
7 в
Do not disassemble, repair,
® and/or alter the product on
your own.
+ Disregarding the warning
may result in fire or electric
shock.
+ Contact a professional to
repair your product.
Do not submerge unit in water. If >
living in humid environments, make
sure the power plug is waterproofed
with silicone. Contact your contractor to
waterproof your power plug.
N J
4 N
Do not touch the plug with
wet hands.
+ Disregarding warning
may result in electric
shock (
Make sure grounding wires are °
properly connected. Failure to do so
may result in electrical leaks or
electric shock.
* If the grounding wire is
not connected to the
product, it may lead
to electrical leaks or
electric shock.
$ Grounding wire should be connected
by a professional.
С Do not turn the power on В
S before adding water. The
power supply must not be
any higher than 110 V.
+ Disregarding
warning may
result in fire.
N J
\
Do not use any loose plugs.
WN The electrical cord should not
be scratched, damaged,
bent, stretched, or bundled.
Also be sure not to clamp or
place anything heavy on the
cords. J
ov
* Disregarding warning N
may result in electric \{ и
shock or fire.
J
Features Guide
| /\ WARNING Ignoring these warnings may lead to serious injury or death. |
4 >
Do not stand on any part
of the bidet.
* Disregarding warning
may result in damage
to the product.
4 NN
Please be gentle with opening
S or closing the bidet lid and
seat.
+ Failure to heed
warning may result
in damage to the
product.
N J
4 >
Do not bend or drag the water
pipe.
* Failure to heed
warning may
result in water
leakage and/or a
Feature
Function
Rear wash
Activates bidet nozzle that releases a spray of water for rear cleansing.
Rear oscillating wash
Moves rear wash nozzle back and forth for rear cleansing.
Front wash
Activates bidet nozzle that releases a spray of water for front cleansing.
Front oscillating wash
Moves front wash nozzle back and forth for front cleansing.
N
a NN
Do not install or leave the remote
control near any open water
* Failure to heed warning may result
in damage to the product.
drained water supply.
N J
a в
Do not expose the product to
extremely cold temperatures.
¢ Failure to heed warning may result
in internal damages as well as
damages to the inlet tube. Thus
resulting in possible water leakage.
N J
f Do not place any heating )
S instruments on or near the
product. Keep it out of direct
sunlight.
* Failure to heed warning may result
in product discoloration, and/or may
result in damage to the product's
microbial coating.
A VW Position buttons
Adjusts washing or drying positions.
Adjustable temperature
Customize and set seat and water temperatures.
Adjustable water pressure
Change water pressure of front and rear wash features.
Seat sensor
Detects user sitting on bidet seat and activates bidet's functions.
Quick, self-heating seat
Heats up the seat according to user's preferred settings.
Dryer
Dries the user after using the front and/or rear wash.
N J
( OQ WARNING: Product gets hot.
Some temperature settings may
not be suited to some users.
* Children, pregnant women, and the
elderly may want to consult physician
before exposure to the seat's higher
temperatures.
* Temperature can be controlled
Adjustable dryer strength
Increase or decrease air flow of the dryer.
Adjustable dryer position
Push out or retract dryer according to user needs.
Remote control flush
Manually flush using the wireless remote control.
Auto flush Sets bidet to flush automatically after user stands up.
Deodorizer Turn deodorizer on to remove odors.
Power switch Tuns bidet ON or OFF.
Energy-saving
Functions either cease or operate at lowest setting.
\_ using the remote J
SQ Many aspects of the product >
are made of plastic products
and may burn if it comes into
contact with direct heat.
* Failure to heed warning may result in
fire.
N J
Soft night light
Dim light at the back of the bowl turns on.
Wash nozzles
Nozzles detach for easy cleaning.
Soft close feature
Install damper to softly close lid and seat.
Wireless remote
Operate bidet functions comfortably when seated.
Time setting
Adjust time settings for bidet.
N J
The company is not responsible for accidents relating to improper usage of the product.
Keylock
Locks remote control settings.
7
Installation Guide
@ Bidet Bowl Installation © | > Connecting Inlet Water |
| > Installation Preparations |
Before installation, check the following: 1.Before installation, connect the angle valve to the pipe.
Walls and floor of bathroom should be finished. 2.0pen the angle valve to release water. Let it run until the water clears up.
and there should be enough space for sewage,
electrical wires, and water lines. Confirm the
distance from the center of the closet flange to the
wall for the rough in. Water supply pressure should
be within a range of 14.5 psi (dynamic) - 108.8 psi
(static). Water temperature should be within a range
о? 41° Е - 95° Е.
3.Connect the inlet water pipe with the angle valve.
4.Open the angle valve and check to make sure that nothing is leaking.
Note: Make sure that the water inflow is greater than
Drain Outlet
18 I/min, otherwise product may not function properly Rough in
| > Position the Toilet |
| > Connecting the Water Pipe |
Г | Toilet inlet pipe connector (N
Г
)
Inlet stainless :
steel hose :
» E
Angle valve
Gasket
Ф Remote Holder Mounting Guide €
| >< Bidet Installation |
Bl Make sure installation area is clean and free of any residues. Otherwise,
tape may not stick on properly. Once installed, allow the remote
holder to sit undisturbed for at least 15 minutes.
1.Before installing anything, check to make sure the outlet underneath
the bidet bowl is in good condition and that the work area is clean.
2.Place the wax seal ring on the outlet underneath the bidet bowl and
apply pressure to the seal to make sure it sticks onto the outlet.
3.Position and place the bidet bowl's outlet over the drain pipe and carefully
lower the bidet on to the ground. Once on the ground, press down firmly
on all sides of the bidet to make sure the outlet and wax seal is secured.
4. Fill in the sides of your bidet's base using silicone or caulk. (1)
5.Clean up your work area and do not use the bidet for as long as your
silicone or caulk sealant needs to set. (Check your product label for setting
time.)
Remote control holder
2
Remove film off of ONE 7
side of the double-sided tape.
Place adhesive exposed side Wall
Outside of bidet ADD of of the tape to the backside of
your remote control's holder. Remove film from other side of
—_——— the tape and place the remote
holder onto your wall. Secure it
to the wall by pressing firmly against
7 the remote control holder.
Silicone or Caulk seal
Installation and Operation Precautions
1.Do not get cement into the bidet. The cement will expand and may crack the
bidet.
2.Do not flush anything other than toilet paper.
3.Do not place the bidet in an environment where temperatures below 32° F. If
the water inside the bowl turns to ice, it may expand and cause the bowl to crack.
4.Do not strike any part of the bidet. Doing so may result in damage to the product.
5.Clean the surface of the bidet with a nylon brush and non-corrosive cleaning agents.
Steel brushes and harsh cleaning agents may damage the surface of the bidet and
corrode pipelines.
Disclaimer: The company will not be held liable for damages or injuries resulting in improper
installation and product misuse.
Using your bidet
E Basic Operations )
This product is operated by using either the accompanying remote control or by using
the control panel located on the side of your bidet.
Note: LED screens on illustrations below are for demonstrative and instructional purposes only.
—/
-
Di,
LILIC WT
e y tro % Y
ПИ
‚ 0
S.T cu
LED Display
(Model 818ZA/725ZA only)
POE
© ©)
we Water temp © at temp
Deodorizer (8)
Nozzledeaning Night light
©9900
Frontwash Rear wash oer
Control Panel (On side of bidet.)
Note: All temperature settings are
displayed in Celsius. Note conversions below.
(+ Bidet Usage and Remote Guide D
The user will know when the function is properly executed indicated by a single audible beep
from the unit. DO NOT rely solely on the icons displayed on the remote's LED screen.
1. Seat sensor X
J
When the user sits on the bidet’s seat, the sensors on the seat will activate
the bidet and it will automatically add more water to the bowl.
If the deodorizer setting is turned on, the function will activate automatically.
This button activates the
front wash funtion. Push it
a second time to activate
the oscillating wash
function. This moves the
nozzle back and forth.
(Icon below will display on
LED screen.)
x
4 2.Rear wash )
25°C =77°F 36° С = 96.8° Е
J
\ == / 33°C =91°F 39°C =102.2°F
Remote Control
C © Preparations before Use )
( N ( >
1. Make sure your product is plugged in 2.Open the water-inlet valve
and the indicator light is on.
N J
4 3.Front wash )
This button activates the
ES Eo 1058
( \
V 5.Stop button J
Cease washing, drying, or nozzle
cleaning function
(Icon below will display on LED
screen.) (=)
front wash funtion. Push it
a second time to activate
the oscillating wash
function. This moves the
nozzle back and forth.
(Icon below will display on
LED screen.)
3.Check to make sure that the
“Power Indicator” light on the
Control Panel is turned on.
O
4.Push the power button on either the
Control Panel or your remote control
Listen for a beep and check to make
sure that the LED lights on the bidet
is on. or (9)
® @® ©
Strength Paosition
00000
dearing Night light © ©
O ©
Flush
Flush setting J
С 6. Position button
Use the (+) (-) buttons to position
the wash nozzles during use.
There are 5 different position
settings. Settings are indicated
on the right side of the LED
screen with the following icon:
)
A
r
N
4. Strength button
Use the buttons to adjust
strength of water pressure during
washing. There are 4 different water
pressure settings. Settings are
indicated on the left side of the LED
screen with the following icon:
\
y
(7.Dryer function —
To dry off after using front or
back wash features, use the
dryer feature. Push button
once to activate. Push button
twice to move dryer back and
forth
r
N
Temperature can be adjusted with
these buttons:
Settings are indicated on the left
side of the LCD display with the
following icon: —
8. Adjusting dryer temperature )
There are 4 heat settings for the dryer.
10. Stop dryer
Stops the dryer function.
Otherwise, dryer will stop after
5 minutes of use.
«bi "С os MIC oe
=: À À $
6
eve
Y)
ar
Strength Post lon
(
N
While using the dryer, adjust its
position using these buttons: (+) (+)
This features comes with 5 different
position settings. All settings are
indicated on the right side of the LCD
screen with the following icon:
9. Adjusting dryer position )
Power © saving E
Nozziepleaning Night light
Water temp Seat temp
e) © lock
11
Ne Flush Flush setting J
(12. Water temperature control) ——
Push the button to set water
temperature. The temperature can be
adjusted from anywhere between 00,
33° C (91° F), 36° C (96.8° F), and
39°C (102.2° F). Keep pushing the
button to toggle between the different
temperature settings.
Current selected temperature can be seen
on the top left of the LED display beside
the following icon:
( : |
L 11. Nozzle cleaning J
This feature is only available when nobody is sitting on the
bidet seat. Push the button and water will come out of
the nozzle and dryer area. Push it once and the rear wash
nozzle will come out so the user can remove it for cleaning.
Push it a second time and the front wash nozzle will come
out. Push the “Stop” button to cease function.
Note: Nozzle will automatically clean itself before rear and front wash.
q 4 ,
Reminder
Heating function is turned
off when there is no
temperature setting
displayed on the LED display.
Push the button to set water
temperature. The temperature can be
adjusted from anywhere between 00,
33° C (91° F), 36° C (96.8° F), and
39°C (102.2° F). Keep pushing the
button to toggle between the different
temperature settings.
on the top left of the LED display beside
the following icon: ol
«98 с od Seg 999
SAS:
on ren © osition
@ 14. Deodorizer
>
Push the (©) button to activate the
deodorization feature. This feature
automatically turns on when the user
30008
@ ®
Nozzlecleaning Night light
sits on the bidet seat. Push button
again to deactivate the setting.
N J
Current selected temperature can be seen
Reminder
The deodorizer ceases function while
the dryer function is activated. It will start
deodorizing once the dryer function stops
and will stay on for another minute and a
half after leaving the seat.
(13 Seat temperature control) ———
J
r
N
15.Power
(20. Power saving modes )
4 —
Push the button to go into power saving mode. The system comes with two different
power saving settings. Pushing the button once will activate the auto-power saving mode.
Both the water and seat temperatures in this mode will remain at 25° C or 77° F. Push the
button again to activate the 5 hour power saving mode. In this mode, both water and seat
Push the (9) button to turn the
remote ON or OFF. The LED
light on the side of the bidet is an
indicator that the bidet is turned on.
\.
heating functions are turned off for 5 hours. Settings will turn back on after 5 hours.
16.Night Light )
J
Push the button to turn on the = Pre
nightlight. Push it one more time to AED c Bbc SEE eee
turn it off. = 99 и С od: С Le чо
- À À $
4 7. Auto-flush settin )
u. 9 \
Push the © button to set the flush
function to auto. The bidet will
automatically flush when the seat sensors FOG O
no longer detect the user on the seat. Sengh Position SO Е
Push button again for 3 seconds to Position
(oactivate auto-flush. ) © ® (+) В © © ОТО OF
ES © ©) © r temp © temp
5 © | 09000
\_ Fish Flus == J
Ne Flush Flush setting J
(o a ON
21. Adjusting the time
18. Manual flush ( 19.Key lock ) = Adjusting >) >
- , ® Push the (+) button on the remote to adjust the hour on your remote's digital clock.
Push the \=/ button to manually flush Pushing the (2) button will lock all the Keep pushing the button to change hour. The remote operates on a 24 hour clock.
your bidet. buttons on the remote and prevent any
Numbers will go from 0-24
user from accessing any of its functions.
Push the button again to release the Push the © button on the remote to adjust the minute time on your remote. Keep
unlock the remote’s features
« pushing the button to change minute time. Numbers will go from 0-59.
13
x
/ 22.Control panel J ~
4
Users also have the option of operating their bidet’s functions by using the control
panel built in to the side of their unit.
Push rear wash button to activate rear
(Wash function. Push it again to stop.
Pr > © NM NN icator
| Model 820ZA/ model 825ZA only
Push dryer button to
activate drying function.
| Push button to flush bidet.
ых front wash button to activate front
wash function. Push it again to stop.
C 23.LED Display )
PB GO s ©
= + 0000 b
00, п
OC WT S.T соо
LED Display
(Model 818ZA/725ZA only)
LED
Power Indicator Constant light indicates the bidet is powered on.
When the seat heating function is turned on, the temperature is displayed
Seat Temp. Indicator [beside the icon indicated on the left. When display shows an F, it means
| the temperature is too high. When it shows an E, it means the seat
0 4 : |
temperature sensor is disconnected. Temperatures are displayed in Celsius.
When the water temperature function is turned on, the temperature Is
Water Temp. Indicator |displayed beside the icon indicated on the left. When display shows an F, it
1 means the temperature is too high. When it shows an E, it means the water
ss temperature sensor is disconnected. Temperatures are displayed in Celsius.
Power Save Indicator b Icon indicates that power saving mode is turned on.
Deodorizing Indicator PH Icon indicates that the auto-deodorizer is turned on.
su,
Night Light Indicator Ш Icon indicates that the nightlight is turned on.
Auto Flush Indicator ©) Icon indicates that the auto-flush function is turned on.
C 24. Beeps )
Beeps
Single beep: A button from the bidet's control panel or remote is activated.
Two successive beeps: A button from the bidet's control panel or remote is activated.
Three or more successive beeps: Indicates a malfunction depending on the beep pattern.
C $ Trouble Shooting $ )
If issue cannot be solved using our troubleshoot guide, please give us a call at 855-239-2666
ISSUE
POSSIBLE CAUSE
Bidet does not turn on
Check to see if power plug is connected to wall. If plug
is connected, wall outlet may not have electricity running
through.
Remote control does not turn
on or operate
Battery may be low or dead. Try replacing the batteries.
Bidet does not flush properly
Water pressure may be too low or the filter may be clogged
Some remote control functions
do not activate after pushing
button
Some remote functions are dependent on either the
activation or deactivation of other functions. Some functions
may also only operate under certain conditions. Please refer
to manual for remote functions.
Water flows out around the nozzle
Bidet nozzles will automatically clean themselves before and
after use as well as when the bidet is initially powered on.
Water does not come out of nozzles
during rear and/ or front wash
cleansing
The water supply may have been cut off or the shut off valve
may be closed.There may also be debris blocking the nozzle
or the filter. Check to see if the nozzle or filter needs cleaning.
Water leaks
Shut off valve, water supply hose, and water separater may
not be properly connected
Water, seat, and dryer temperature
is not warm enough
Please check your temperature settings.
Cleaning and Maintenance
/
| | >
@ Cleaning the Bidet J N
* Do not use any harsh cleaning agents on the bidet's surfaces. This includes, but is not limited
to: banana oil, benzene, decolorizers, and diluters. Do not freely pour water over bidet's
surfaces. Doing so may result in short circuiting and/ or fire.
¢ Remove power plug before cleaning the unit.
© Scrub the unit gently with a soft cloth using gentle, non-abrasive cleaning solutions.
N
( ON
| © Nozzle Maintenance and Cleaning ) x
+ Push the nozzle cleaning button. Water will begin trickling out of the nozzle and dryer unit. Push
the button a second time to extend the rear wash nozzle. Push the button a third time to retract
the rear wash nozzle and extend the front wash nozzle. Nozzles can be
cleaned by simply using a toothbrush.
* To replace the nozzle's tip, while the nozzle is extended, hold the tip of
the nozzle and turn it counterclockwise. Then pull the old tip off.
Replace it by attaching the new tip to the extended nozzle and turning it
clockwise.
** Do not forcefully pull or bend the nozzle tip
e Filter Cleaning ) ~
20
When the water pressure is too low or there is insufficient water coming
out, it may be time to clean the filter.
1.Close the shutoff valve and stop the water supply.
Notice: Do not remove the filter without closing the shut off valve
completely. Otherwise, water will spray out during the process.
17
4 \
2.Remove the filter.
Unscrew the filter cover using a flathead screwdriver and pull the cover off.
\ J
4 в
3.Clean the filter.
Remove the filter to clean it thoroughly.
Use a toothbrush to clean out the filter
and remove debris.
Notice: Do not use any cleaning agents. Clean it with water only.
Handle the filter gently, otherwise the shape may warp and the filter
may no longer attach properly.
N J
7 в
4.Reattach the filter
Reverse the steps above to reattach the filter.
Notice: Check to see that everything is properly installed before re-opening the
shutoff valve.
is dd
18
‘в : , Ia e Replacing the Bidet's Spare Battery)
eplacing the Remote's Batter
$ Battery installation
1.Use a flathead screwdriver to wedge open the bottom right corner of the remote. + Steps:
1.Remove the power plug
2.Lift up the bidet portion of the unit (as shown below)
3.Remove battery cover
4.Remove and replace the old battery with a 9 volt alkaline battery.
This will remove the back cover.
2.Using the same flathead screwdriver, or even a coin, rotate the “+” groove
counterclockwise and remove the battery cover. Take care not to let the seal
ring fall out. 5.Flush the unit and check to see if it functions properly.
3. Place 3 volt battery into the remote text side up. 6.Place the battery cover back on when finished and replace the bidet unit on top
4.Replace the battery cover and use the flathead screwdriver to screw the battery of the bowl.
cover back on. The seal ring should still be attached. Note: Only the 820ZA/825ZA/830ZA models include back up power.
5.Replace the remote control cover.
Flashing power light
y If the power button on the bidet's
“side control panel is flashing, the
spare battery may not have been
$ Replace battery in remote when the buttons stop properly responding. installed properly
Note: This locks up the bidets
features until battery placement
is corrected.
Spare battery —
Remote control Button battery Battery cover Remote control cover
un
Please use 9 volt alkaline batteries only
Please properly recycle old battery
A \ J
Seal ring —
Notice:
Take care that the battery is placed correctly.
Remove the battery if the remote will not be used for an extended period of time.
Note:
19 20
Appendix
Product specification
21
Rated power supply
Rated power consumption
Power cord length
Water pressure range
Water pressure adjustment
Water Temp. Adjustment
Heater Capacity
Safety Device
General cleansing flow rates
Feminine cleansing flow rates
Heater capacity
Surface temperature
Safety device
Heater capacity
Dryer temperature
Safety Service
Power consumption
Method
Weight
Dimensions
AC 110V 60HZ
1680w (When the inflow of water is at 41° F, set the
outflow temperature and strength to maximum.)
1.5m
Cleansing and Flushing
0.1Mpa(dynamic)-0.75Mpa(Static) ( flow volume is no
less than 18L/min)
Adjustable in 4 levels
4 Adjustable settings: Room temperature, 33° C (91.4° F),
36° C (96.8° F), and 39° C (102.2° F)
1600w
Temperature control system; over-heating safety
mechanism; over-drying safety mechanism; water
and electricity isolation system.
0.5-0.9L/min(Minimum required water pressure:0.15Mpa)
0.5-0.9L/min(Minimum required water pressure:0.15Mpa)
Seat Heating
40w/45w
4 Adjustable settings: Room temperature, 33° C (91.4° F),
36° C (96.8° F), and 39° C (102.2° F)
Temperature control system; over-heating safety
mechanism
Warm Air Dryer
200w/350w
4 adjustable temperature settings from 32° C (89.6° F)
up to 62° C or (143.6° F)
Temperature Reset Switch/Temperature fuse
Deodorizer
3w
Chemical absorption
C Packing List )
7
N
Thank you for purchasing our product!
Please check to make sure that the following items are included in this box:
1 Smarttoilet
1 Manual
1 Warranty card
1 Spanner
1 Angle valve
1 Rear wash nozzle
1 Frontwash nozzle
1 Remote control set (remote control, remote control holder, double-sided tape)
1 3V battery (for remote)
1 9V alkaline battery
22