Architectural Mailboxes 7509RZ-10 Redondo 3 in. Round In-ground Post Assembly Instructions
Add to my manuals1 Pages
advertisement
3” Round In-Ground Mailbox Post with Cover (Model 7509)
Assembly Instructions
Thank you for purchasing this premium mailbox post. We know you'll be satisfied with the years of service it will provide. If you have any questions about how to assemble or install this product, or if you need any replacement parts, please call us directly at (800) 464-7491 or contact us at www.architecturalmailboxes.com.
Assembly Instructions
Tools (not included)
Two open end wrenches
4 holes at top
- or -
1
Join the two post pieces together using the 6 sheet metal screws and 6 small washers.
!
Tighten only until snug.
Phillips head screwdriver
6 holes in the middle
2
Attach the Top Plate to the Post using the 4 small bolts and 8 small washers.
Hardware (included)
To attach the top plate to the post: x 4, small hex bolts x 8, small washers x 4, small nuts
To join the two post pieces: x 6, large sheet metal screws x 6, small washers
To join the two decorative covers: x 4, small phillips screws
To attach the mailbox to the plate: x 4, large hex bolts x 8, large washers x 4, large nuts no holes at bottom
!
Ensure that the post plate is facing toward the street before installing into the ground.
3
Install the assembled post into the ground as described in the instructions for the mailbox. Pay particular attention to the location, height, and distance from the street.
concrete footing recommended
4 Attach the two halves of the decorative post cover to eachother around the post using the 4 screws.
The cover will be slightly loose so that it can be raised during gardening or lawn maintenance.
R www.architecturalmailboxes.com (800) 464-7491
Rev. I © 2014, Architectural Mailboxes, LLC
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project