RIDGID 62995 T-202 1-1/8 in. Bulb Auger Drain Cleaning Tool Manual

 RIDGID offers a wide variety of cutters and augers to clean everything from
С AB IE TO D LS grease to root blockages. With the RIDGID line of cable tools, you will always
have the right tool for the job.
*Tools shown are not to scale or
proportional with each other.
Straight Auger Bulb Auger Drop Head Auger
Initial / Exploratory
Funnel Auger NN Spade Cutter 3 Blade Cutter 4 Blade Cutter N Hook Auger
N
Spiral Saw Tooth Cutter Saw Tooth Cutter Spiral Bar Cutter Shark Tooth “H” Cutter
Follow-Up
TO ATTACH TOOL
Grease Cutter Grease “C” Cutter
Grease Blockages
SLIDE TOGETHER
Expanding Finishing Cutters
Finishing Tools TO REMOVE TOOL
Miscellaneous Tools
INSERT PIN
For C-4, C-6, C-61C, C-7, C-8, C-9, C-10, C-11,
C-12, C-14, C-15, C-31, C-32, C-33, C-44,
C-45, and C-46 & all IW Cables.
We ( TIP)
Build
Always start with a straight auger to try and determine what you
Reputations” are trying to clean. Then chose the correct cutter to clear the drain.
DROP HEAD AUGER STRAIGHT AUGER FUNNEL AUGER HOOK AUGER
For cleaning back to back mounted For use in exploring and breaking up For use as second tool in line. Breaks up For heavy and dense root stoppages in
fixtures e.g., sinks where cable needs stoppages or returning sample to surface remains of stoppage left by straight auger. pipes that require hooking and breaking up.
to be led into down pipe. to determine correct tool.
RETRIEVING AUGER SPADE CUTTER FOUR BLADE SAW TOOTH CUTTER GREASE CUTTER
For searching for cable which is broken or For following up after augers have been For blockages caused by hardened, glazed For lines which have become badly greased
lost in line. used and to open up floor drains. material such as chemical deposits. with detergents and have to be opened.
SPIRAL SAW TOOTH CUTTER SAW TOOTH CUTTER SPIRAL BAR CUTTER SHARKTOOTH CUTTER
For clearing any stoppage, roots, rags, For cleaning lines blocked heavily with For main sewers blocked by roots, leaf For use in cleaning pipes of general
sticks, etc. roots. Unique design permits cutter to debris, sticks, sawdust, cloth, and sacking. material clinging to pipe walls.
be removed from damaged pipe without
locking.
GREASE “C” CUTTER EXPANDING FINISH CUTTERS CHAIN KNOCKER FLUE BRUSH
For grease blockage in lines leading from For final removal of material adhering to For use when vigorous action is required For use for finish cleaning required of
garbage disposal unit or waste pipe. walls and certain roots of fibrous nature. for cleaning of scale in pipes and boiler boiler tubes and heat exchangers.
tubes.
ESR PR Be el
y
(I АНН |
o e dica ес итог,
FE es | =
A ed ETA
byt
el A
Ur
STARS
НОЯ!
800.769.7743 RIDGID.com