Husky G07207S-US 98 in. H x 72 in. W x 24 in. D Steel Garage Cabinet Set Manual

Item # 1001 509 625/
706 064
Model # G2802B-US
USE AND CARE GUIDE
28 IN. 2-DOOR BASE CABINET
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 5 p.m., EST, Monday - Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
>
Due to continuing improvements,
the actual product may differ slightly =
from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Husky!
Table of Contents
TableofGontents .............. ccc, 2 Assembly. . .........cc iii tiie a ana au un
Safety Information... .............................. 2 Maintenance. ...........j_oeo0oeceasosoroereaeeooo
Warranty. ..............—. ee. .eemerecsmrem.. 2 Care and Cleaning. .................__e_._..20000em0....
Specifications. .............c_c_oemeemmssrraraeene 3 Service Parts. ........e.—..om—e—eeennoenaoonnooonñ
Pre-installation............ eee eeeesmeenaae ee. 3
Safety Information |
To reduce the risk of serious injury, read and follow the safety Keep the product on level surfaces. The product could
instructions below before assembling and using this product. become unstable and it may tip over if stored or moved
m This product is intended for indoor use only. e A ever pego which may cause personal injury,
eath or product damage.
>
0 This product is not designed for commercial nor industrial
usage.
Any assembly or maintenance of the product must be
Use at least two people to move, assemble or install carried out by adults only.
this product. Failure to do so can result in personal
>
injury or product damage.
DO NOT stand or lean on the product.
> >
Close and lock the doors before moving this product.
DO NOT alter this product in any manner. For example, do
not weld external bar locks or attach electrical equipment.
This may cause product damage or personal injury.
> >
Check all nuts and bolts periodically for tightness.
When required, tighten them.
DO NOT leave children unattended near this product.
Cabinet may tip over if improperly opened.
> >
Warranty
1 year Limited Warranty for Solid Wood top. This warranty excludes incidental/inconsequential damages and failures due to misuse,
abuse or normal wear and tear.
This full warranty gives you specific rights, and you may also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
Specifications
Maximum load for each door 11 Ibs. / 5 kg
Maximum load for shelf 100 Ibs. / 45.4 kg
Maximum load for bottom panel 100 Ibs. / 45.4 kg
Maximum load for wood top 100 Ibs. / 45.4 kg
Maximum total load 322 Ibs. / 146.2 kg
Pre-Installation |
TOOLS REQUIRED
Hox Kop) ot included) Hex Screwdriver Bit
HARDWARE INCLUDED
A NOTE: Screws shown to actual size.
|
Part | Description Quantity
AA M6 x 16 hex socket head screw 48
55] Adjustable foot EE
CC Shelf bracket 4
DD M6 x 16 hex socket head cap screw 2
3 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
Part
Description
Quantity
Right door
1
Bottom panel
Right side panel
Part | Description Quantity
A Solid wood top 1
B Left side panel 1
C Front top beam 1
D Left door 1
E Shelf 1
Back panel
ен | == | Я | 62 | п
Back top beam
-— | №) | == | =
Assembly
A NOTE: Assemble on a flat surface. A piece of cardboard is recommended to keep the product from being scratched during assembly.
1 INSTALL THE ADJUSTABLE FEET
Install the adjustable feet (BB) to the bottom panel (G). Make sure the sides A of the adjustable feet are facing either towards
the back or the front of the cabinet. Tighten securely with sixteen M6 x 16 hex socket head screws (AA).
Back
View from under
the cabinet
у, ATTACH THE SIDE AND BOTTOM PANELS
Two M6 x 16 hex socket head cap screws (DD) (security screws) should
be fixed to the left bottom face of cabinet for additional door security.
Attach the side panels (B & H) to the bottom panel (G) with two M6 x 16 hex socket head cap screws (DD) (security screws)
and six M6 x 16 hex socket head screws (AA).
AA
A
{7
Two M6 x 16 hex socket
head cap screws for
additional door security
5 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (continued) |
3 ATTACH THE TOP BEAMS
0 Attach the front top beam (C) to the side panels (B & H) with six M6 x 16 hex socket head screws (AA). Tighten securely.
o Attach the back top beam (J) to the side panels (B & H) with two M6 x 16 hex socket head screws (AA). Tighten securely.
View from inside of cabinet
A ATTACH THE BACK PANELS
Make sure your floor is free of debris or the cabinet face is
protected before laying the cabinet on its face.
The top edge of the top back panel should be inserted under
the back of the back top beam.
о [Тау the cabinet on its face.
0 Attach the back panels (I) to the back of the cabinet with fourteen M6 x 16 hex socket head screws (AA). Tighten securely.
(NS
= #
Nr
NN
o ss
Insert the top edge of top back
panel under the back top beam.
Assembly (continued) |
5 ATTACH THE SOLID WOOD TOP
m Attach the wood top (A) to the cabinet top by inserting four M6 x 16 hex
socket head screws (AA) through the pre-drilled holes underneath the top
beams (C & J) to the wood top (A). Tighten securely.
By A
<
2e
—— — —" — — — — — — —
us
7
\
6 ATTACH THE DOORS
о Insert the pins from the hinges on the left door (D) into the
slots of the bottom hinges at the front of the left side panel (B).
0 Repeat the same procedure to attach the right door (F).
p— || : < 7
A |
+ 7 | 7
2
77 В 0 Ш A
NY
= H
A
LT
U -
7 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (continued) |
7 INSTALL THE SHELF
m Insert four shelf brackets (CC) into the slots on the side panels at the desired height. Make sure the four brackets (CC) are at
the same height. Place the shelf (E) over the shelf brackets (CC), and push it down onto the shelf brackets. Make sure the
shelf (E) is properly and safely locked by the upright hooks of the shelf brackets.
Slots on the inner front
side of side panel
Slots on the inner back side
of side panel
Shelf locked by shelf bracket
UU after installation
Maintenance |
1 Check all the screws and nuts periodically for tightness. Tighten them when necessary.
Care and Cleaning
O Periodically clean the surfaces with a soft rag and water.
O Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
Service Parts
—
— ©
non
od
AA
-—
pl
e; SH
8
a
M Е 6
Part | Replacement Part # | Description Quantity Part | Replacement Part # | Description Quantity
K 304213 Key 2 | 113539 Back panel 2
A 571215 Solid wood top 1 J 226801 Back top beam 1
B 113555 Left side panel 1 L 312033 Magnet 2
C 113537 Front top beam 1 M 304212 Lock 1
D 113541 Left door 1 AA 320327 M6 x 16 hex socket head screw 48
E 226803 Shelf 1 BB 313066 Adjustable foot 4
F 113542 Right door 1 CC 226078 Shelf bracket 4
G 113534 Bottom panel 1 DD 320332 M6 x 16 hex socket head cap screw 2
H 113556 Right side panel 1
Replacement keys may be ordered. Call 1-844-370-2288 .
9 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Y HUSKY
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.
item # 1001 509 629/
706 060
Model # G2804B-US
USE AND CARE GUIDE
28 IN. 4-DRAWER BASE CABINET
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 5 p.m., EST, Monday - Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Due to continuing improvements,
the actual product may differ slightly
from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Husky!
Table of Contents
TableofGontents .............. ccc, 2 Maintenance.............22002 0202 sa sa aa aa a aa un
Safety Information, .............._.......2.020220000.... 2 Care and Cleaning. ............._.e_e._..200000 00000
Warranty. ...........—.— ee. mennedeeaodonana ma 2 Drawer Removal. ..........eeeweo—eecnonoanorenemeo
Specifications. ........._ec_eeeeeseneneranana ae 3 Drawer Replacement. ................eeeesreesreroenmoo
Pre-installation. ..........oe e. eee semmuenanenano,a 3 Service Parts. . ......ee—o_eeoesen0neneneneonmnmeCID.
Assembly. .........—..ioe_—eceemenaonanonnanenas 5
Safety Information |
To reduce the risk of serious injury, read and follow the safety Keep the product on level surfaces. The product could
instructions below before assembling and using this product. become unstable and it may tip over if stored or moved
on an uneven surface, which may cause personal injury,
death or product damage.
oO This product is intended for indoor use only.
0 This product is not designed for commercial nor industrial
usage.
Any assembly or maintenance of the product must be
carried out by adults only.
Use at least two people to move, assemble or install
this product. Failure to do so can result in personal
>
injury or product damage.
Wear safety glasses when removing or repositioning
the slides. The tool could slip, causing personal injury.
Close and lock the drawers before moving the cabinet.
DO NOT alter this product in any manner. For example, do
not weld external bar locks or attach electrical and lock
>
equipment. This may cause product damage or personal
Injury. DO NOT open more than one drawer at a time. The
product may become unstable and tip, which may
cause personal injury or product damage.
Check all nuts and bolts periodically for tightness.
When required, tighten them again.
DO NOT stand on the product or lean on the drawers
or wood top.
> E Eb E >
DO NOT leave children unattended near this product.
> >
Cabinet may tip over if improperly opened.
Warranty
1 year Limited Warranty for Solid Wood top. This warranty excludes incidental/inconsequential damages and failures due to misuse,
abuse or normal wear and tear.
This full warranty gives you specific rights, and you may also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
Specifications
Maximum load for each drawer 50 Ibs. / 22.7 kg
Maximum load for wood top 100 Ibs. / 45.4 kg
Maximum total load 300 Ibs. / 136.2 kg
Pre-Installation
TOOLS REQUIRED
Hex Wrench Drill Safety Goggles | — . .
(Hex Key) (not included) TA (not included) GE Tex Screwdriver Bit
HARDWARE INCLUDED
A NOTE: Screws shown to actual size.
|
Part | Description Quantity
AA M6 x 16 hex socket head screw 16
BB Adjustable foot 4
3 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation (continued) |
PACKAGE CONTENTS
Part | Description Quantity
A Base cabinet 1
Assembly
A NOTE: Assemble on a flat surface. A piece of cardboard is recommended to keep the product from being scratched during assembly.
INSTALL THE ADJUSTABLE FEET
o Install the adjustable feet (BB) to the cabinet bottom. Make sure side A of the adjustable feet (BB) are facing either
towards the back or the front of the cabinet.
oO Tighten securely with sixteen M6 x 16 hex socket head screws (AA).
Back
View from under
the cabinet
5 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Maintenance
0 Lubricate the slides semi-annually with a spray lubricant or light duty oil.
oc Check all the screws and nuts periodically for tightness. Tighten them when necessary.
Care and Cleaning
0 Clean the cabinet surfaces and drawers periodically with a soft rag and water.
о Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
Drawer Removal
0 Pull the drawer out until it is extended to the maximum. There are two black release levers: one on each side of the drawer.
o Pull one up while you push the other one down simultaneously. At the same time, pull the drawer out of the drawer slides.
Pull up Push down
(on one side of the drawer) (on the other side of the drawer)
Drawer Replacement
Extend the drawer slides from the cabinet. Insert the brackets on each side of the drawer into the slots in the cabinet slides,
being careful that they are properly positioned. Once properly inserted, completely close the drawer to set the slides in their
proper positions.
Service Parts
Part | Replacement Part 4 | Description Quantity Part |Replacement Part # | Description Quantity
F 304213 Key 2 E 571215 Solid wood top 1
B 304212 Lock 1 AA 320327 M6 x 16 hex socket head screw 16
C 300115 Slide -L 4 BB 313066 Adjustable foot 4
D 300116 Slide -R 4
Replacement keys may be ordered. Call 1-844-370-2288 .
7 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Y HUSKY
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.
Нет # 1001 509 633/
706 059
Model # G2802W-US
USE AND CARE GUIDE
28 IN. WALL CABINET
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 5 p.m., EST, Monday - Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Due to continuing improvements, >
the actual product may differ slightly
from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this cabinet. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Husky!
Table of Contents
TableofGontents .............. ccc, 2 Assembly. . .........cc iii tiie a ana au un
Safety Information... .............................. 2 Maintenance. ...........j_oeo0oeceasosoroereaeeooo
TC 1.221111 11111 1 a a a a a sa a aa ue 2 Care and Cleaning,
Specifications. .............c_c_oemeemmssrraraeene 2 Service Parts. ........e.—..om—e—eeennoenaoonnooonñ
Pre-installation............ eee eeeesmeenaae ee. 3
Safety Information |
To reduce the risk of serious injury, read and follow the safety Keep the product on level surfaces. The product could
instructions below before assembling and using this product. become unstable and it may tip over if stored or moved
on an uneven surface, which may cause personal injury,
death or product damage.
0 This product is intended for indoor use only.
0 This product is not designed for commercial nor industrial
usage.
This product must be securely mounted on wall before
Any assembly or maintenance of the product must be using.
carried out by adults only.
DO NOT stand on this product. You may fall which may
Arrange for necessary manpower when assembling, cause personal injury or death.
installing and moving the product.
DO NOT put anything on the top panel of this product.
Close and lock the door before moving this product.
> > E
Check all nuts and bolts periodically for tightness. When
DO NOT alter this product in any manner. For example, required, tighten them.
do not weld external bar locks or attach electrical
>
equipment. This may cause product damage or
personal injury. DO NOT leave children unattended near this product.
> PEPE >
Cabinet may tip over if improperly opened.
Warranty |
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and tear.
This full warranty gives you specific rights, and you may also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
Specifications
Maximum load for each door 11 Ibs. / 5 kg
Maximum load for shelf 50 Ibs. / 22.7 kg
Maximum load for bottom panel 50 Ibs. / 22.7 kg
Maximum total load 122 Ibs. / 55.4 kg
Pre-Installation |
TOOLS REQUIRED
Hex Wrench
Drill
(Hex Key)
(not included)
Level
rm Socket (10mm)
jo CD a CO) a= .
(not included)
(not included)
Q)
Measuring Tape
| (not included)
HARDWARE INCLUDED
A NOTE: Screws and bolts shown to actual size.
NO
i!
>
—
Safety Goggles
(not included)
AT
Hex Screwdriver Bit
Part | Description Quantity
AA M6 x 16 hex socket head screw 28
BB | M6 x 40 hox tapping bolt - | EN ес
CC Shelf bracket 4
DD M6 x 16 hex socket head cap screw 2
3
WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
Part | Description Quantity
A Top panel 1
B Left side panel 1
C Left door 1
D Shelf 1
E Bottom panel 1
Part | Description Quantity
F Right door 1
G Right side panel 1
H Back panel 2
| Mounting bracket 1
Assembly
A NOTE: Assemble on a flat surface. A piece of cardboard is recommended to keep the product from being scratched during assembly.
1 ATTACH THE BOTTOM AND SIDE PANELS
Two M6 x 16 hex socket head cap screws (DD) (security screws) should
be fixed to the left bottom face of cabinet for additional door security.
Attach the side panels (B 8: G) to the bottom panel (E) with two M6 x 16 hex socket head cap screws (DD) (security screws)
and six M6 x 16 hex socket head screws (AA).
|
Two M6 x 16 hex socket head cap VA N
screws for additional door security
у, ATTACH THE TOP PANEL
Attach the top panel (A) to the side panels (B & G) with eight M6 x 16 hex socket head screw (AA). Tighten securely.
5 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (continued) |
J ATTACH THE BACK PANELS
Make sure your floor is free of debris or the cabinet face is
protected before laying the cabinet on its face.
The top edge of the top back panel should be inserted under
the back of the top panel.
a Lay the cabinet on its face.
oO Attach two back panels (H) to the back of the cabinet with fourteen M6 x 16 hex socket head screws (AA) . Tighten securely.
Insert the top edge of top back
panel under the top panel.
4 ATTACH THE DOORS
a Simply insert the pins from the hinges on the left door (C) into the slots of the bottom hinges at the front of the left side panel (B).
0 Repeat the same procedure to attach the right door (F).
Assembly (continued) |
5 INSTALL THE SHELF
Insert four shelf brackets (CC) into the slots on the side panels (B 8: G) at the desired height. Make sure the four brackets (CC)
are at the same height. Place the shelf (D) over the shelf brackets (CC), and push it down onto the shelf brackets. Make sure
the shelf (D) is properly and safely locked by the upright hooks of the shelf brackets.
Slots on the inner D Slots on the inner
front side of side back side of side
panel panel
Shelf locked by shelf
bracket after installation
CC—8
6 INSTALL THE MOUNTING BRACKET
The M6 x 40 hex tapping bolts (BB) should be drilled
into the studs of the wall. | Wall
The mounting bracket should be level after installing
on the wall.
Wear safety glasses when drilling the screws into
the wall.
O Decide the location of the wall cabinet on the wall first to find the
location of the mounting bracket (I). The bottom edge of the mounting >
bracket (1) should be 3.9 in. away below the cabinet's top edge. = NY UT
OC Install the mounting bracket (I) on the wall with two M6 x 40 hex
tapping bolts (BB).
7 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (continued) |
f HANG THE CABINET
Make sure the wall cabinet is securely attached to the
mounting bracket.
Hang the wall cabinet onto the mounting bracket (1).
Maintenance
oO Check all the screws and nuts periodically for tightness. Tighten them when necessary.
Care and Cleaning
O Periodically clean the surfaces with a soft rag and water.
O Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
Service Parts
L
Part | Replacement Part # | Description Quantity Part |Replacement Part # | Description Quantity
J 304213 Key 2 H 113539 Back panel 2
A 113557 Top panel 1 | 226833 Mounting bracket 1
B 113535 Left side panel 1 K 312033 Magnet 2
C 115891 Left door 1 L 304212 Lock 1
D 226829 Shelf 1 AA 320327 M6 x 16 hex socket head screw 28
E 113554 Bottom panel 1 BB 320328 M6 x 40 hex tapping bolt 2
F 115892 Right door 1 CC 226078 Shelf bracket 4
G 113536 Right side panel 1 DD 320332 M6 x 16 hex socket head cap screw| 2
Replacement keys may be ordered. Call 1-844-370-2288 .
9 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Y HUSKY
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.
Item # 1001 574 802/
715 169
Model + G0502AC-US
USE AND CARE GUIDE
5 IN. x 2 IN. CASTER SET
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 5 p.m., EST, Monday - Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Due to continuing improvements,
the actual product may differ slightly
from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of
this caster set. We strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Husky!
Table of Contents
TableofContents ..................... 2
Safety Information. .................... 2
Warranty. . ...................... 2
Specifications. ..................... 2
Pre-Installation. ..................... 2
Safety Information
Assembly. .................. 3
Maintenance. ................. 3
Care and Cleaning. ............... 3
ServiceParts. ................. 3
To reduce the risk of serious injury, read and
follow the safety instructions below before
assembling and using this product.
O This product is intended for indoor use only.
0 This product is not designed for commercial
nor industrial usage.
WARNING: Any assembly or maintenance
of the product must be carried out by
adults only.
CAUTION: This caster set is for Husky
A 28 in. 4-drawer base cabinet and Husky
28 in. 2-door base cabinet only.
CAUTION: DO NOT move the base cabinet
when the caster are braked. DO NOT use
casters on rough or uneven surface.
WARNING: Wear safety glasses when
A removing or repositioning the casters. The
tool could slip, causing personal injury.
CAUTION: Check all nuts and bolts
A periodically for tightness. When required,
tighten them again.
Warranty
CAUTION: DO NOT over load. This may
cause caster to collapse and /or base
cabinet to tip over with serious personal
injury, or product damage.
>
3 year Limited Warranty. This warranty excludes incidental/inconsequential damages
and failures due to misuse, abuse or normal wear and tear. This full warranty gives you
specific rights, and you may also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
Specifications
| Maximum load for each caster |
220 Ibs./ 100 kg |
Pre-Installation
TOOLS REQUIRED HARDWARE INCLUDED
| A NOTE: Bolt shown to actual size.
philips Safety “000 орет End Wrench
. ti NA ;
(not included) (not included) thot included) Part | Description Quantity
AA | M6 x 16 hex flange bolt 16
Pre-Installation (continued)
PACKAGE CONTENTS
| < Part | Description Quantity
( B A Swivel caster 2
B Rigid caster 2
Assembly
Make sure the brakes of the rigid
A casters face towards the inside of
the base cabinet.
0 Carefully lay the base cabinet on its back, with a
soft mat underneath for protection.
0 Position the two swivel casters (A) on the back side
of the base cabinet. Insert eight M6 x 16 hex flange
bolts (AA) through the casters and into the bottom
of the base cabinet. Tighten securely.
0 Repeat the same procedure to install the two rigid
casters (B) on the front side of the base cabinet.
The brakes of the rigid casters (B) should face towards
the inside of the base cabinet.
Maintenance
Check all the bolts and nuts periodically for tightness. Tighten them when necessary.
Care and Cleaning
о Clean the caster surfaces periodically with a soft rag and water.
о Grease and oil can be removed with most standard cleaning fluids.
For safety, use a nonflammable cleaning fluid.
Service Parts
Part |Replacement Part # Description Quantity
A 302201 Swivel caster 2
B 302200 Rigid caster 2
AA 321006 M6 x 16 hex flange bolt] 16
3 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Y HUSKY
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.
Item # 1001 513 026/
706 063
Model # G7200S-US
USE AND CARE GUIDE
72 IN. WORKBENCH
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 5 p.m., EST, Monday - Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Due to continuing improvements,
the actual product may differ slightly
from the product described herein.
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this workbench. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Husky!
Table of Contents
TableofGontents .............. ccc, 2 Assembly. . .........cc iii tiie a ana au un 5
Safety Information... .............................. 2 Maintenance. ...........j_oeo0oeceasosoroereaeeooo 7
TC 1.221111 11111 1 a a a a a sa a aa ue 2 Care and Cleaning, 7
Specifications. .............c_c_oemeemmssrraraeene 2 Service Parts. ........e.—..om—e—eeennoenaoonnooonñ 8
Pre-installation............ eee eeeesmeenaae ee. 3
Safety Information
To reduce the risk of serious injury, read and follow the safety
instructions below before assembling and using this product. Kegp tha product on level surfaces. Tha product could
become unstable and it may tip over if stored or moved on an
uneven surface ,which may cause personal injury, death or
product damge.
O This product is intended for indoor use only.
Oo This product Is not designed for commercial nor industrial usage.
Any assembly or maintenance of the product must be
carried out by adults only.
DO NOT alter this product in any manner. For example, do
not weld external bar locks or attach electrical equipment.
This may cause product damage or personal injury.
Use at least two people to move, assemble or install this
cabinet. Failure to do so can result in personal injury or
Check all nuts and bolts periodically for tightness. product damage.
When required, tighten them.
DO NOT stand on the product and do not use it as scaffold.
> BB >
DO NOT leave children unattended near this product.
Warranty |
1 year Limited Warranty for Solid Wood top. This warranty excludes incidental/inconsequential damages and failures due to misuse,
abuse or normal wear and tear.
This full warranty gives you specific rights, and you may also have other rights, which vary state to state.
Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.
Specifications
| Maximum load | 3000 Ibs. / 1360.5 kg |
Pre-Installation
TOOLS REQUIRED
Drill Open End Wrench (14mm)
Hex Wrench Un Hex Screwdriver Bit (not included) (not included)
(Hex Key)
HARDWARE INCLUDED
A NOTE: Hardware shown to actual size.
| — + (o) He
| INN
Part | Description Quantity
AA M6 x 16 hex socket head screw 38
BB Washer 16
CC M8 hex nut 8
DD M8 x 85 hex bolt 8
EE Adjustable foot 4
3 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Pre-Installation (continued) |
PACKAGE CONTENTS
A
-
+
+
<- +
-
Ne
e,
—
A
——
Part | Description Quantity
Solid wood top 1
Back stiffener
Upper supporting frame
Bottom supporting frame
m |||
= | о | о |
Front stiffener
Assembly
A NOTE: Assemble on a flat surface. A piece of cardboard is recommended to keep the product from being scratched during assembly.
1 ATTACH THE SOLID WOOD TOP AND UPPER SUPPORTING FRAMES
After assembly, the back of the upper supporting frames are
flush with the solid wood top's back.
Attach the upper supporting frames (C) to the solid wood top (A) with sixteen
M6 x 16 hex socket head screws (AA). Tighten securely.
TS Sh
e GS,
Front——
\3
? ATTACH THE BOTTOM SUPPORTING FRAMES
Two open end wrenches (14mm) are recommended. One to
screw the bolt, and another one to hold the nut while screwing
the bolt.
The back of the bottom supporting frame has two holes in it.
The back of the bottom supporting frame should be fixed to the
back of the upper supporting frame.
The left and right supporting frames should be at the same
A height after installation.
O Insert the bottom supporting frames (D) into the square holes of the
upper supporting frames (C).
oO Adjust the height of the bottom supporting frames (D) to a desired
height. Adjust from 28.3 in. to 42.1 in. in 1 in. increments.
0 Attach the upper and bottom supporting frames (C & D) together with
eight M8 x 85 hex bolts (DD) and washers (BB) in the holes of the
supporting frames (C 8: D). Insert a washer (BB) and a M8 hex nut (CC)
onto the end of each M8 x 85 hex bolt (DD). Tighten securely.
After installation
5 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Assembly (continued) |
3 ATTACH THE FRONT STIFFENER
Attach the front stiffener (E) to the front top of the workbench with nine M6 x 16 hex socket head screws (AA). Tighten securely.
7
<>
ACOSO 5
TN
'
—
N
NN
\\
N=
/
5
\
©
A
4 ATTACH THE BACK STIFFENERS
Attach the back stiffeners (B) to the back of the workbench with thirteen M6 x 16 hex socket head screws (AA). Tighten securely.
D
>.
J B un <=
A = / |
| || =:
т! | |
° |
С «||
> |e
| Ls ,
„| т ы J ‚
e” _— Щи DT
- [J =] |
B B a
© <
A
Assembly (continued) |
5 INSTALL THE ADJUSTABLE FEET
Screw the adjustable feet (EE) into the holes in the bottom supporting frames (D). T |
6 STAND UP THE WORKBENCH
Stand up the workbench and place it on the desired level floor. Adjust the feet if necessary to make the workbench stable.
Maintenance |
Check all nuts and bolts periodically for tightness. When required tighten them.
Care and Cleaning
0 Periodically clean the workbench surfaces with a soft rag and water.
O Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid.
7 WWW.HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
Service Parts
1 —к
Part | Replacement Part # | Description Quantity | | Part | Replacement Part # | Description Quantity
A 571210 Solid wood top 1 AA 320327 M6 x 16 hex socket head screw 38
B 226689 Back stiffener 2 BB 324002 Washer 16
C 113485 Upper supporting frame 2 CC 323074 M8 hex nut 8
D 114029 Bottom supporting frame 2 DD 321212 M8 x 85 hex bolt 8
E 226689-N01 | Front stiffener 1 EE 313068 Adjustable foot 4
Y HUSKY
Questions, problems, missing parts? Before returning to the store,
call Husky Customer Service
8 a.m.-5 p.m., EST, Monday-Friday
1-888-HD-HUSKY
WWW.HUSKYTOOLS.COM
Retain this manual for future use.