Location:

Canterbury ™

Shower System with Hand Shower

4505

Specification Submittal

Feature Highlights

■Symmons shower system with lever handles.

■Symmons Temptrol ® pressure balancing mixing valve with adjustable stop screw to limit handle turn.

■Separate dual outlet lever diverter valve

■Wall/hand shower with 5 foot flexible metal hose, in-line vacuum breaker, wall connection and cradle for hand shower mounting

■3 Mode shower head with arm and flange

■Flow rate 2.5 gpm (9.5 L/min) for both shower head and hand shower

■Metal construction with polished chrome finish

Model Numbers

 4505 ..................

Shower System with Symmons

Temptrol ® pressure balancing p/n 4000-BODY and dual outlet diverter p/n 2DIV-BODY

 4505-TRM .........

Trim only, valve and diverter must be ordered separately

 4000-BODY........

Symmons Temptrol trim

® pressure balancing mixing valve without

 4000-X-BODY.... Symmons Temptrol ® pressure balancing mixing valve without trim. Valve includes integral service stops to allow water shutoff for service.

 2DIV-BODY....

Symmons dual outlet diverter valve without trim

Options / Modifications

Append appropriate -suffix to model number.

 -IPS 1/2 inch female IPS connections on

Symmons Temptrol

 -X Symmons Temptrol mixing valve i

®

®

mixing valve

pressure balancing stops to allow water shut-off for service, p/n 4000-X-BODY. (Option only applies when ordering model 4505.)

 -2.0 2.0 (7.6 L/min) Flow rate restrictor

 -1.5 1.5 (5.7 L/min) Flow rate restrictor

 -T736 36 inch slide / grab bar with ADA hand shower in place of standard hand shower unit

Standards / Certifications

ASME A112.18.1/CSA B125.1

Finish Options / Modifications

Append appropriate -suffix to model number.

 -STN

-

Satin nickel

Polished chrome (standard finish)

Warranty

■ Limited Lifetime - to the original end purchaser in consumer installations.

■ 5 years - for commercial installations

Dimensions Canterbury Shower System with Hand Shower, 4505

Male 1/2" IPS thread must be recessed

1/4" (6 mm) from finished wall for proper installation of street ell and flange.

5-1/4"

(135 mm)

8-5/8"

(219 mm) shower discharge approx.

6" (152 mm)

 5"

(127 mm)

Screw wall cradle into stud or install proper backing.

approx.

37"

(940 mm) finished wall

8"

(203 mm) minimum

3-1/2"

(89 mm)

 7-1/2"

(191 mm) hot and cold inlets approx.

40"

(1016 mm)

2" ± 1/2"

(51 mm ± 13 mm)

Note: Dimensions subject to change without notice.

floor line

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184

Phone: (800) 796-6667 www.symmons.com ■

■

Fax: (800) 961-9621

[email protected]

Copyright © 2016 Symmons Industries, Inc.

■

ZV-643 REV B

■

071816