advertisement
KPT-DS
Direct Steam Pedestal Tilting Kettle
Project
Item No.
Quantity
Model KPT-20DS - 20 gallon (76 litres) direct steam pedestal tilting kettle
Model KPT-30DS - 30 gallon (114 litres) direct steam pedestal tilting kettle
Model KPT-40DS - 40 gallon (151 litres) direct steam pedestal tilting kettle
Model KPT-60DS - 60 gallon (227 litres) direct steam pedestal tilting kettle
Model KPT-80DS - 80 gallon (303 litres) direct steam pedestal tilting kettle
CONSTRUCTION
Water resistant construction
304 stainless steel construction with #4 satin finish
316 stainless steel interior cooking surface for added corrosion resistance for 20, 30 and 40 gallon
Stainless steel pipe shall support the kettle and tile console.
Tilt console houses the steam control and tilt mechanism
Hemispherical design on bottom of kettle for superior heat circulation
Stainless steel, self locking tilt mechanism permits kettle to tilt forward
90° to empty
STANDARD FEATURES
Steam inlet piping concealed in tilt console
Stainless steel faucet bracket
One year parts and labor warranty*
* For all international markets, contact your local distributor.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Etched markings
Gallons
Litres
Draw Off valves and accessories
2” (50mm) draw off valve
3” (76mm) draw off valve
2” (50mm) dairy valve
3” (76mm) dairy valve
Perforated strainer for draw off
Solid stainless steel disc for draw off valve
Faucets
Single pantry faucet with swing spout
Double pantry faucet with swing spout
Covers
One piece lift off stainless steel cover
Spring assist hinged stainless steel cover
Baskets
Tri-basket assembly
Single basket
316 stainless steel liner for 60 and 80 gallon
50 PSI (345 kPa) high pressure operation for higher cooking temperature
Pan carrier
Strainer hook
Graduated measuring strip
Steam trap assembly consisting of steam trap, check valve, and Y strainer
Pour strainer
Correctional package
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
KPT-DS PEDESTAL BASE TILTING KETTLE
APPROVAL/STAMP
MODEL A B C D E F G H J K L M N (2”) N (3”)
KPT-20DS 21[535] 18[460] 37[940] 34.75[885] 14.75[375] 20[508] 13.5[343] 41[1041] 15.25[387] 20.5[521] 59.5[1512] 17.5[445] 16.75[425] 16.25[413]
KPT-30DS 24[610] 20[510] 37[940] 37.75[960] 16.25[413] 21.5[546] 14[356] 43[1092] 13.25[337] 20[508] 62.5[1588] 17.5[445] 14.75[375] 14.25[362]
KPT-40DS 26[660] 22.5[570] 37[940] 39.75[1010] 17.25[438] 22.5[572] 15.5[394] 45[1143] 10.75[273] 18.5[470] 64[1626] 17.5[445] 12.25[311] 11.75[298]
KPT-60DS 29.5[750] 26[660] 40.5[1029] 43[1092] 18.87[479] 24.13[613] 17.5[445] 48[12.19] 10.25[260] 19.25[489] 74[1879] 17.5[445] 14.25[362] 13.75[349]
KPT-80DS 33[840] 28[710] 42.5[1080] 46.5[1181] 20.63[524] 25.88[657] 19[483] 52[1321] 9.75[248] 20.5[521] 76[1930] 20.5[521] 12.25[311] 11.75[298]
SHORT FORM SPECIFICATIONS
Provide Blodgett model KPT-20DS (20 gallon), KPT-30DS (30 gallon), KPT-40DS (40 gallon), KPT-60DS (60 gallon) or KPT-80DS (80 gallon) direct steam pedestal base tilting kettle. The unit shall have a double wall interior to form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation. Unit shall have stainless steel pipe to support the kettle and tilt console. Tilt console shall conceal the steam piping, house the steam control valve and tilt mechanism. The tilt mechanism shall permit the kettle to tilt forward a full 90° for complete emptying. The titling mechanism shall be self locking for positive stop action. Construction shall be all welded satin finish 304 stainless steel. 20, 30 and 40 gallon models shall have a 316 stainless steel liner. Unit shall be ASME code stamped and National Board registered. Provide options and accessories as indicated.
PIPING REQUIREMENTS:
Steam Supply
Condensate Return
3/4” IPS (19 mm)
1/2” IPS (13 mm)
STEAM PRESSURE:
Minimum 5 PSI (34 kPa)
Maximum 35 PSI (241 kPa) standard kettle
50 PSI (345 kPa) optional high pressure kettle
Pressure reducing valve required if incoming steam pressure exceeds the kettle rating.
SHIPPING INFORMATION:
Approx. Weight:
KPT-20DS 280 lbs. (127 kg)
KPT-30DS
KPT-40DS
KPT-60DS
KPT-80DS
325 lbs. (147 kg)
370 lbs. (168 kg)
400 lbs. (181 kg)
460 lbs. (209 kg)
NOTE: The company reserves the right to make substitutions of components without prior notice.
Printed in U.S.A.
BLODGETT
44 Lakeside Avenue, Burlington, VT 05401
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
NOTE: FOR COMMERCIAL USE ONLY P/N S00016 Rev D (12/06)
advertisement
Related manuals
advertisement