ELECTRIC COUNTER TOP

CONVEYOR TOASTER

OPERATION MANUAL

CT-250

CT-500

CT-750

CT-500 Shown

CECILWARE CORPORATION

43-05 20 th

AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295

■

718-932-1414 FAX 718-932-7860 www.cecilware.com

NN54A 5/05

TABLE OF CONTENTS

Introduction ................................................................................. page 2

Packaging .................................................................................... page 2

Installation ................................................................................... page 3-4

Operation ..................................................................................... page 4-5

Cleaning, Care and Maintenance ............................................... page 5

Safety ........................................................................................... page 5-6

Trouble shooting ......................................................................... page 6-7

Compliance .................................................................................. page 7

Electrical Diagram ....................................................................... page 7

Explosion View ............................................................................ page 8

Spare Part List ............................................................................. page 9

Specifications .............................................................................. page 10

1

Introduction

Congratulations on the purchase of your Cecilware Conveyor Toaster. Please take time to carefully read through this manual to ensure the machine is operated and maintained properly. This will enable the best possible performance from this product for many years.

Cecilware will not accept liability for the following if:

*The instructions in this manual have not been followed correctly.

*Non-authorized personnel have tampered with the machine.

*Non-original spare parts are used.

*The machine has not been handled and cleaned correctly.

Packaging

Cecilware prides itself on quality and service, ensuring that at the time of packing all products is supplied fully functioning and free of damage.

Provided in this package are the following:

* Conveyor Toaster

* Crumb Tray

* Feeder Rack

* Return Chute

* Pass through Chute

* Feet (4)

* Manual

Should you find any damage that has occurred in transit, please contact your Cecilware dealer immediately?

2

Installation

Remove the Cecilware Conveyor Toaster from the packaging. Be certain that all protective plastics and residues are thoroughly cleaned from its surface.

Place the Cecilware Conveyor Toaster on a firm level surface.

Local standards and regulations should be consulted in order to abide by standards set in relation to positioning, spacing, and ventilation.

Caution:

Do not position and operate near combustible materials/flammable objects. Once the Conveyor Toaster has been placed in position, ensure the front and back stainless steel trays are positioned correctly.

Supply the appropriate power and connect to source. The Conveyor Toaster is now ready to turn on and operate. (For power supply, please see technical specification sheet, page 10).

Your Conveyor Toaster can operate as a pass through operation or return operation. Please see diagrams below and follow the instruction for the appropriate/required method.

Back Toaster

Drawer

Close

Back

Tray Cru mb crumb Tray will be out from the front crumb tray

3

Front Crumb

Tray

Operation

The Cecilware Conveyor Toaster has upper and lower elements which can be used together or alternatively; the top element can be used on its own. This can provide flexibility when toasting and grilling.

The Toaster has 3 functions which are controlled by the function dial on the left of the unit. See below for the listed functions

Settings:

Off: Power Off

Full Toast: Provide Full power to both Upper and Lower elements

Top Toast: Provide full power to the upper element only

Standby: Energy Saver – reduce power to unit to save power whilst not in use, whilst keep the unit warmer for fast heat when required.

Please see diagram below.

4

Additionally you are able to control the speed of the conveyor rotations which in turn determine the darkness/lightness of you toasted products.

 Adjusting the speed control in a clockwise direction will increase the speed in turn resulting in lighter toasted products.

 Adjusting the speed control in a anti-clockwise direction will slow the conveyor speed in turn resulting in darker toasted products

Please see diagram above.

Important Notice: If the malfunction lights activates, the unit is malfunctioning. Turn off or disconnect the unit from the power supply and refer to a qualified service technician.

* Caution : When in operation, the Conveyor Toaster will be hot; at the entrance to the conveyor cavity.

Please take extreme caution.

Cleaning, Care and Maintenance

Switch off the power and disconnect from the power source.

The Conveyor Toaster should be cleaned after each day’s operation; however, the unit may require more frequent cleaning, depending on the volume of production.

Allow the Conveyor Toaster to cool before cleaning. Remove the return chutes, feeder and crumb trays and wipe clean with a damp cloth; be sure to dry before returning them to the unit. For details cleaning these non electrical parts can be submerged and wash thoroughly if needed.

The remainder of the Conveyor Toaster can be cleaned with a damp cloth using hot, soapy water.

Do not immerse completely in water or use hose to clean.

Warm soapy water is recommended for cleaning; prolonged use of cleaning agents may cause damage to stainless steel.

Safety

Cecilware Qualified Service Technician should carry out repairs if necessary. Do not remove any components or service panels on this product.

5

When cleaning, switch power off and disconnect from the outlet. If the power cord is damaged, it must be replaced by a Cecilware Recommended Qualified Service Technician in order to avoid a hazard.

Allow the Conveyor Toaster to cool down after use before dismantling for cleaning; the unit will still be too hot to handle immediately after use.

Trouble Shooting

If your Cecilware Conveyor Toaster does not operate, please check the following before placing a service call.

Conveyor Toaster CT-250, CT-500, CT-750

Problem Cause Remedy

1.

Mains power supply 1.

Check mains power supply.

The unit does not work; the indicator light is not on.

2.

Unit is not switched on

3.

Dial Control or Timer are faulty

4.

Plug and lead are damaged

2.

Check that the unit is correctly plugged in and turned on; ensure you have read the manual for both for the operations functions.

3.

Call service agent or qualified technician.

4.

Call service agent or qualified technician.

The unit is heating but the indicator lights are not on.

Slow heat up or no heat up, power is on.

Conveyor is not rotating

5.

Internal wiring fault

1.

The indicator light is faulty

1.

2.

3.

4.

Incorrect operation

Warm Up

Elements are faulty

Power dial is faulty

1. The unit is not on or the function control is not activated.

2. Speed Control Fault

3. Motor Fault

4. Gear/Chain Fault

5.

Call service agent or qualified technician.

1.

Call service agent or qualified technician.

1.

Ensure that you have clearly read the manual, to understand the operating functions.

2.

Allow 5 minutes warm up period.

3.

Call service agent or qualified technician.

4.

Call service agent or qualified technician.

1. Turn the unit on and adjust function control to required setting.

2. Call service agent or qualified technician.

3. Call service agent or qualified technician.

4. Call service agent or qualified technician.

6

Please ensure:

* There is correct power supply.

* The machine is plugged in correctly and power is switched on.

* The timer and thermostat are in the correct position.

* The elements are clear of any food waste.

Note: All Cecilware products are tested prior to packing.

Compliance

Cecilware products have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.

As testimony to such compliance, Cecilware products carry the following marks/symbols:

Electrical Diagram

Model ： CT-250, CT-500, CT-750

The above circuit diagram has been provided to assist qualified technicians. A Recommended Qualified

Service Technician should carry out repairs if needed. Do not remove any components or service panels on this product.

7

Explosion View

Model: CT-250, CT-500, CT-750

8

27

28

29

30

31

32

33

21

22

23

24

25

26

14

15

16

17

18

19

20

7

8

9

10

11

12

13

2

3

4

5

6

Spare Parts List

Model: CT-250, CT-500, CT-750

CT-250

No. Description QTY Part NO. QTY

CT-500

Part NO.

1 Return Chute 1 NA 1 NA

Feet

Fan Cover

Base Plate

Fan

Motor

4

1

1

1

1

08131

08132

NA

08134

08136

4

1

1

1

1

08131

08133

NA

08135

08137

34

35

*

Nosing

Shaft Bracket

Shaft Cover

Wheel

Chain

Element Fixing Plate

Conveyor Belt

Outer Body

Pass Through Chute

Back Door Chute

Plug & Lead

Inner Top Panel

Inner Insulation Baffle

Top Cover

Element Cover

Element Assembly Plate

Upper Element

Lower Element

Conveyor Drive Shaft

Multi Function Control Switch

Green Indicator Light

Red Indicator Light

Dial

Variable Speed Controller

Thermal Cut Out

Feeder

Bushing

Conveyor Support Runner

Crumb tray

Resistance

1

1

1

1

1

2

1

1/L

1/R

1

1

1

2

1

1

2

1

1

1

1

1

1

1

1

1

4

1

2

4

4

2

2

1

1

08145

08154

08118

08119

08148

08151

08152

08032

08109

08155

08157

08158

08161

NA

NA

08106

NA

NA

NA

NA

08055

NA

NA

NA

08138

08139

08140

08112

08128

08141

08142

1

1

1

1

1

2

1

1

2

1

1

2

1

1

1

1

1

1

1

1

1

4

1

2

4

4

2

08146

08154

08120

08121

08149

08151

08153

08067

08109

08156

08157

08159

08161

NA

NA

08107

NA

NA

NA

NA

08047

NA

NA

NA

08138

08139

08140

08112

08128

08141

08143

9

1

2

1

1

2

1

1

1

1

1

5

1

1

1

1

1

1

1

2

1

1

4

1

2

4

4

2

QTY

CT-750

Part NO.

1 NA

4

1

08131

08133

1

1

1

NA

08135

08137

08138

08139

08140

08112

08128

08141

08144

2

1

1

NA

NA

NA

08047

NA

NA

NA

08147

08154

08122

08123

08150

08151

08153

08067

08109

08156

08157

08160

08161

NA

NA

08108

NA

Specifications

MODEL

CT-250

CT-500

CT-750

Volt(V)

120

POWER

(Watts)

1500

208/240 2000/2600

208/240 2400/3200

Amps(A)

12.5

9.6/10.8

11.5/13.3

DIMENSIONS (INCHES)

L X W X H

16.5 x 11.4 x 16.1

16.5 x 14.5 x 16.1

16.5 x 18.5 x 16.1

10

CECILWARE CORPORATION

43-05 20 th

AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295

■

718-932-1414 FAX 718-932-7860 www.cecilware.com

11