Owner Instructions

Warning!

Read instructions before using the machine

JVP 180-11

www.myhenry.co.uk

Kit AH-0

Schematic Diagram

Data

Drum Size Cleaning

Range

8 L 26.4 m

Protection Class

Class II

Weight

(Ready to work)

7 kg

Sound Pressure

≤70 dB(A) Uncertainty 0.5dB

Size

340 x 365 x 360 mm (W x L x H)

Replacement Parts

604165

909291

907076

907075

TriTex Filter

TriTex Filter

HepaFlo Dust Bags

NVM 1CH (Pack of 3)

NVM 1CH (Pack of 5)

NVM 1CH (Pack of 10)

5

1

3

2

4

4

6

Assembly

7

Start

+ +

+

Low

Using your machine

Power on light

1

2

Low High

1

3

Cleaning the machine

2

5

9

6

(907073) Tritex Filter

4

7

2

1

8

10

1

1

2

Fitting the face

2

CLICK

CLICK

Wand docking

Tool tidy

3

5

1

7 8

4

6

2

Changing the cable

7

8

9

10

5

6

3

4

1

2

Voltage

Frequency

Rated Input Power

Weight (ready to work)

Company Name & Address

Model

Machine yr/wk Serial number

WEEE Logo

Protection Class 2 Symbol

CE Mark 9

PPE

(personal protective equipment) That may be required for certain operations.

1

2

3

7

About your machine

5

6

4

10

8

Ear Protection Safety Footwear Head Protection Safety Gloves Eye Protection Protective

Clothing

Dust / Allergens

Protection

Hi Vis Jacket

Caution Floor Sign

NOTE: A risk assessment should be conducted to determine which PPE should be worn.

Mains leads:

Safety Critical Components

HO5V V-F 10m x 2 x 1.00 mm 2

WEEE Legislation

(Waste, Electrical and Electronic Equipment)

Vacuum cleaner, accessories and packaging should be sorted for environmentally - friendly recycling.

(Only for EU Countries)

Do not dispose of vacuum cleaner into household waste!

According to the European Directive 2012/19/EU on waste electrical and electronic equipment and its incorporation into national law.

Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmentally - friendly manner.

Failure to rectify the problem or in the event of a breakdown contact your Numatic dealer or the

Numatic Technical helpline +44 (0)1460 269268.

Daily

Keep the machine clean, including hoses and tubes.

Ensure the bag and filter are fitted.

Regularly examine the power cord.

Check dust bag frequently.

Check filters are clean.

Weekly - as daily and:-

Check for any worn or damaged parts and replace immediately.

Do not steam clean or pressure wash.

Information for dry use vacuum cleaners

Ensure you read the instruction manual before using the machine.

Operators shall be adequately instructed on the use of these machines, as with all electrical equipment, care and attention must be exercised at all times during use, you must also make certain that routine and preventative maintenance is carried out periodically to ensure safe operation.

WARNING

Failure to carry out maintenance as necessary, including the replacement of parts to the correct standard could render this equipment unsafe and the manufacturer can accept no responsibility in this respect.

This machine is for DRY USE only

You must disconnect the machine from the mains by removing the plug from the supply socket BEFORE cleaning or maintenance and when replacing parts or converting the machine to another function.

This appliance is intended to be assembled, cleaned and maintained by an adult.

This machine is not suitable for the collection of biological hazards, hazardous or explosive dusts. Contact your local distributor if you require a machine capable of performing these tasks.

This machine is not a toy; children shall not play with this machine.

The machine must not to be used by persons with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction.

You must not allow the supply cord to come into contact with rotating brushes (if fitted).

Only use the socket outlet on the machine for purposes specified in the instructions (where fitted).

This machine must not be stored outside, or used in wet environments, or to collect wet materials.

The vacuum cleaner should be stored in a dry place and is for indoor use only.

You must ensure that the filtration system fitted to the machine is suitable for the material being collected.

CAUTION

NOTES This product complies with the requirements of IEC/EN 60335-2-69 2012.

The primary use for this machine is commercial, for example in hotels, schools, hospitals, factories, shops and offices.

If the vacuum cleaner stops working, remove the plug from the wall before investigating where the fault lies.

If the vacuum cleaner has a blockage, switch off, remove the plug from the socket outlet, and inspect the floor tool, wands and hose for debris. If the floor tool, wands and hose are clear, replace the dust bag and clean the filter.

The vacuum cleaner should be inspected after use for damage.

The power light will illuminate, when your machine is connected to a suitable power supply (where fitted).

DO

•

•

•

•

Keep your machine clean.

Keep filters clean.

Use filter bags, they will enhance performance and help keep machine clean.

Use a Numatic original filter bag under fine dust conditions.

•

•

Keep hoses and tubes clear.

Replace any worn or damaged parts immediately.

• Regularly examine the power cord. If damage is found such as cracking or ageing the power cord must be replaced by a competent person using the correct Numatic original part.

• Change dust bag frequently.

• Keep diffuser filter (where fitted) clean.

• Only use the brushes provided with the machine. The use of other brushes may impair safety.

DON’T

• Unreel the cable with one pull or pull on the cable to unplug the machine from the power supply.

• Use to suck up hot ashes or lighted cigarette ends.

• Use steam cleaners, pressure washers or immerse in water to clean the machine.

• Attempt machine maintenance or cleaning unless the power supply plug has been removed from the supply outlet.

• Use in a wet environment or to collect wet materials.

• Store your machine in wet conditions.

Warranty

Distributed by:-

Numatic International Limited, Chard, Somerset, TA20 2GB

Telephone: 01460 68600

Fax: 01460 68458

UNITED KINGDOM: www.numatic.co.uk

FRANCE: www.numatic.fr

PORTUGAL: www.numatic.pt

GERMANY: www.numatic.de

NETHERLANDS: www.numatic.nl

SWITZERLAND: www.numatic.ch

SOUTH AFRICA: www.numatic.co.za

SPAIN: www.numatic.es

Specification subject to change without prior notice www.numatic.com © Numatic International Limited

910105 05/19 (A02)