VIRTUFIT Elite TR-1000i User Manual

Elite TR-1000i Treadmill

User manual

ENG

INDEX

Safety instructions 3-4

Checklist 5-6

Assembly instructions

Folding instructions

Maintenance treadmill

Problem solutions

7-11

12-13

14-15

16

Control panel 17-23

Kinomap 24

Program speed table

Training instructions

25-26

27

Exploded drawing

Part list

28

29-32

VirtuFit Elite TR-1000i Treadmill

ENG

2

SAFETY INSTRUCTIONS

WARNING: We suggest that you should consult with your health professional before starting your workout, especially for the age up to 35 old or people with health problems. We do not take responsiblity for any problems or injuries if you don’t follow our instructions.

ATTENTION

– Ensuring the safety clamps were attached to the clothing or belts before using the treadmill.

– Please do not insert any items to any part of the equipments, which would damage the equipment.

– Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may interfere with proper ventilation. Do not place the treadmill near water or outdoors.

– Never start the treadmill while you are standing on the walking belt. After turning the power on and adjusting the speed control, there may be a pause before the walking belt begins to move, always stand on the foot rails on the sides of the frame until the belt is moving.

– Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing that may be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.

– Keep the children and pets away from the treadmill while starting workout.

– Don’t exercise in 40 minutes after dinner.

– The equipment is suitable for adults, children need be accompanied with adults while workout.

– You must hold on to the handrails until you become comfortable and familiar with the treadmill when it is your first workout.

– Treadmill is indoor-using equipment, not outdoor-using for avoiding damage. Keep the store-place clean and flat, drying. Prohibiting the other purpose using, only for workout.

– Please purchase the power-line to the distributor or contact with our company directly, for the powerline only equip to the treadmill.


ENG

3

SAFETY INSTRUCTIONS

– The treadmill is for indoor and not outdoor use to prevent damage on the product. Keep the storage area dry, clean and flat. It is forbidden to use the device for other purposes than before training.

– Only use the power cable supplied by the supplier for the treadmill. If the cable is missing, please contact our company.

– If the treadmill should suddenly increase in speed due to an electronics failure or the speed being inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged from the console.

– Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not put any heavy thing on cable or put the cable near the heat source; forbid using socket with several holes, these may cause fire or people may be hurt by the power.

– Cut off the power when the equipment is not used. When the power is cut off , do not pull the power line to keep the wire unbroken. Insert the plug to the socket with the safety ground circuit, for the power-line is professional equipment .You must contact with the professional people directly while the line is damaged.

– This Treadmill only for home-using, the max user weight is 155 KGS.

– Please keep the space at least 1 X 2 meter at the end of base frame to escape any accidents!


ENG

4

CHECKLIST

TOOL KIT

Main Frame Upright Post Frame ( L & R ) Console

Display Base frame cover Console rear cover

Manual


Hardware bag

Safety key

ENG

Silicon oil

5

CHECKLIST

TOOL KIT

Allen C.K.S half thread screw (M8*60*20 ) 4cps

Allen C.K.S full thread scw ( M8*15 ) 8pcs

Allen C.K.S full thread screw ( M8*20 ) 2pcs

Philips C.K.S self-taping screw ( ST4*12 ) 2pcs

Philips C.K.S. self-taping screw ( ST4*16 ) 4 pcs

Allen C.K.S half thread screw ( M8*30*20) 2pcs

T shaped wretch ( S6 ) 1 pcs


ENG

Cross Wrench 1pcs

6

ASSEMBLY INSTRUCTIONS

Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and the treadmill. Some parts (bolts, screws, etc.) are already attached to / in the treadmill.

Socket screws: The treadmill contains socket screws, make sure that the allen key is firmly in the bolt before you apply force to the key. In this way you prevent the head of the socket head screw from being rotated.

STEP 1

– Take out the machine from box and put in on a flat floor;

– Connect communication wire of the console with the right upright post. Insert the left and right upright post on the base frame, and then fix the each upright post with 2pcs M8*60*20 screw and 1pc M8*20 screw.


ENG

7


STEP 2

– Fold up the treadmill, (Note: Before assemble the base frame cover, please ensure the screws for base frame and upright post are fixed completely);

– Put the base frame covers in the left and right side of upright post, then clip-on the covers together;

– Last, fix the covers by 1pc ST4*12 screw.


ENG

8


STEP 3

– Insert the console on the upright post. See above picture. (Note: Please connect the communication cables in the right handlebar and upright post, avoid damaging the cable);

– Use 2pcs M8*15 screw to fix each upright post, and then use 1pc M8*30*20 screw to fix the hole under each handlebar. (Note: The screw M8*30*20 is for adjusting the handlebar, it can not be fixed tightly, or else the tube will be damaged).


ENG

9


STEP 4

– Put the display on the console, and lock the two parts together with 4pcs M8*15 screw.


ENG

10


STEP 5

– Place the rear cover on the rear of the console and fix it with 4pcs ST4*16 screw;

– Check all screws were fixed rightly or not. Make sure the treadmill was assembled stably.


ENG

11

FOLDING INSTRUCTION

PUSH UP

Hold the running deck which showed in “F” position and then fold it up with the arrow direction until you hear a “bang” voice from the air cylinder.

Attention: it is forbidden to fold up when the machine is in running or incline mode.

UNFOLDING

Support place F with hand , kick the place E of air pressure bar, then the base frame will fall down automatically.


ENG

12

FOLDING INSTRUCTION

To transport, hold the treadmill from position “F” and tilt until the wheels are able to move on the ground.


ENG

To tilt, start by placing one hand at position “F” to support the top end of the treadmill. Next, place one foot at position “D” to hold the bottom end of the treadmill steady. With your foot at “D”, slowly tilt the top of the treadmill downward towards the ground. Once the Main Frame “F” reaches a low enough point, the wheels of the treadmill will become active.

13

MAINTENANCE TREADMILL

LUBRICATING THE BELT

RUNNING BELT AND DECK LUBRICATION

This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the deck. You need contact with our service center if you find the damage of the deck.

We recommend lubrication of the deck according to the following timetable:

I. Light user (less than 3 hours/ week) annually

II. Medium user (3-5 hours/ week) every six months

III. Heavy user (more than 5 hours/ week) every three months

Best indicator is to lubricale when the walking platform feels dry. We recommend that you buy the lubrication from our distributor or directly to our company.

Attention: Any repair need the professional technician.

I. We suggest that you should cut off the power for 10 minutes after keep running 2HS ,so that it’s good for maintain the treadmill.

II. For avoiding the slipping during running , the belt not too loose; for avoiding the more abrasion between the roller and belt and maintain the machine’s good running ,the belt not too tight.

You can adjust the distance between plates and belt, the belt be away from the plates about 50-

75mm on both sides, if the best not too tight and loose.

We strongly recommend that you do the following:

1. Switch off and remove the power cable from the wall after every use, especially if children are present.

2. Clean your treadmill after use.

3. Use a dry cloth to clean the control panel and areas around the power switch. Use a soft clean cloth and cleanser to remove stubborn stains and dirt off the running belt.

4. Tighten the running belt once a month.

5. Keep your treadmill in a safe dry place away from heat and water.


ENG

14

MAINTENANCE TREADMILL

RUNNING BELT ADJUSTMENT

(1) Running belt deviates to left - Start the machine, set speed at 2-3 km/h without a load on the belt, use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2 minutes. Repeat process until the belt becomes central.

(2) Running belt deviate to right - Start the machine, set speed at 2-3 km/h without a load on the belt, use Allen key to turn the screw 1/4 turn (see fig. 2). Then allow the machine to run without a load for 1-2 minutes. Repeat process until the belt becomes central.

(3) Running belt jam - If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a turn both left and right until the jam solved (see fig 3).


ENG

15

PROBLEM SOLUTIONS

Console short of display

E7

E01

E02

E03

E04

E05

E06

E08

E10

E11

E12

Problem

Treadmill stop working

Treadmill stop suddenly

Button out of work

No pulse display

Reason How to settle the problem

A: Did not connect the power supply

B: Safety key did not put on right position

C: Transformer not connect well or transformer is defective

D: Circuit breaking

A: Safety key drop out

B: System defective

A: Button broken or invalid

B: All buttons broken

C: Motor wire and controller not connected well or controller defective

A: Handle pulse wire not connect

B: Console circuitry defected

A: Display screw get loose

B: System defective

The console can’t detect the safety key signal

Inverter overload protection

Overload protection shutdown

Inverter overheat protection

Overvoltage protection

Undervoltage protection

Inverter output short circuit


Low voltage display

Emergency stop display

Motor overload protection

Connect the power supply or switch on

Well put the safety key on the correct position

Reconnect the transformer or replace the transformer

Check input and output port and communication wire

Reconnect the safety key

Ask for reparing

Repalce the button

1. Replace the key board and wire

2. Replace the main board

3. Replace the console

Reconnect or replace the controller

Reconnect or replace the wire

Replace the console

Lock the screws

Replace the console

1. Check the safety key is in place

2. Reconnect the safety key

3. Replace the console

Replace the inverter or ask for checking or repair







Low voltage display

Emergency stop display

Motor overload protection


ENG

16

CONTROL PANEL

FUNCTION EXPLANATION

When the treadmill is stopped, press the START key to turn on the treadmill.

Press “START” key when running, it will pause.

START/PAUSE

STOP

SPEED ADJUSTED

When the treadmill is running, stop the treadmill slowly by pressing the

STOP key.

Decrease or increase the running speed.

SPEED SHORTCUT

In the treadmill running state, set the speed directly to the key specified value; the speed range is 1.0 ~ 20.0KM/H.

INCLINE ADJUSTED

Decrease or increase the running speed.

INCLINE SHORTCUT

In the treadmill running state, set the incline directly to the key specified value; the incline range is 0 ~ 15%.


ENG

17

CONTROL PANEL

FUNCTION

VOLUMN ADJUSTED

MODE

EXPLANATION

Volumn adjusted key: decrease or increase music volumn.

When the manual mode is selected, the normal mode is selected. Press the MODE key to cycle through the countdown mode in manual mode -> countdown to calorie mode -> countdown distance mode -> positive timing mode; in P1-P36, it is the reset button to countdown time default value (30 minutes);

SMART SPEED

Adjust the speed intelligently.

PROGRAM SELECT

Select the program P0 ~ P36, U02, U03, HRC1 ~ HRC3, FAT when the treadmilll is stopped.


ENG

18

CONTROL PANEL

“SPEED” window:display speed data;

“TIME” window:display time data;

“DISTANCE” window:display distance data, steps data;

“CALORIES” window:display calories data;

“PULSE” window:display heart rate data;

“INCLINE” window: display incline data;

MP3 OPERATION INSTRUCTION

The console is with built-in double channel audio, switching regulated power Supply, adapter wire of audio with the audio source and MP3 input port of the console, then operate.

SAFETY GUIDE

1. Put the power cord into the electrical outlet with 10A. Flip this switch to the “ON” position. The screen shines with prompt sound.

2. Put the safety key on the correct position, connect the safety key with your cloth in front of your chest.

3. Press “+”,“-” key or “QUICK SPEED” key to adjust treadmill speed.

4. “START/PAUSE” key :When the treadmill is stopped, press the START key to turn.

5. On the treadmill. Press “START” key when running, it will pause.

6. “STOP” key, when the treadmill is running, stop the treadmill slowly by pressing the STOP key. All setting returns to default state.

7. Press “+”,“-” key or “QUICK INCLINE” key to adjust treadmill incline;

8. In any state, pull-out safety locks, window displays: ”E7” and sound buzzer DI-DI-DI. Treadmill stops running.


ENG

19

CONTROL PANEL

9. Electric control system is in the security monitoring at any time, as long as there is any abnormal information, the treadmill will stop running urgently, the screen displays abnormal information prompts, and accompanied by a tone.

10. Press “STOP” key when screen displays abnormal information, the motor start to slow to stop, all data will be clear.

MANUAL MODE

1. How to enter manual mode:

A: Switch on, enter normal manual mode.

B: When power off, press “MODE” key to enter manual mode.

2. Three setting function of manual mode: Time setting, Distance setting,calories setting; Enter manual mode, press ‘MODE’key to set different mode, then press ‘START’ to restart the treadmill. User can set the speed and incline. Default speed: 1.0KM/H， Incline: 0%. Normal mode, time countdown, distance countdown, calories countdown; set any one mode, setting date starts counting down.

A: When enter manual setting, Time window display 0:00;Count time, distance, calories is in positive counting status. Close setting function, when the motor running, press‘ STOP’ key, the motor start to slow down to stop, all setting return to default state.

B: Under standard manual mode, press ‘MODE’ key to enter time countdown mode, window display time with shining when standby, when in setting mode, TIME window display time with shining, initial time is 30:00 minute, press ‘ +’ or ‘-’ to setting the speed. Time setting range: 5:00-99:00, walk only for 1:00.

C: In time countdown mode, press ‘ MODE’ to enter distance countdown mode, the distance window shines.Initial distance is 1.0 km, press speed key ‘+’ and ‘0 ’to set the distance and range. Setting range: 1.0-99.0KM, work for 1.KM.

D: When in distance countdown mode, press ‘ MODE’ to set the calories, calorie window shines. Initial window shines. Initial calorie displays: 50， Default:50Cal, press speed key ‘+’ and ‘-’to set the calorie range: 20-9990CAL.


ENG

20

CONTROL PANEL

PROGRAM SETTING

”P1-P36” is system program setting key, only used under time countdown mode, setting time window shines, press ‘ +’ ‘-’ to adjust the setting status, press ‘MODE’ to return to the default status, time window shines when in setting status , initial time: 30 minutes, setting range: 5:00—99:00. Press speed ’+’ ‘-’ key to adjust the setting status.

1. In P1-P36, the speed and slope of each program is divided into 16 segments;

2. A chirp will sound when switching between segments;

3. When the motor is running, press the start key, the motor stops running, the various parameters remain unchanged;

4. Press the start key again, and the tempo will run at the speed in the automatic program;

5. Set the time to zero, the speed slowly reduced until the stop, the middle window shows End, the buzzer to alarm;

6. Pull off the safety key to stop the motor running, the time window displays “E07”, and the buzzer will sound a short alarm.

BODY FAT FUNCTION

When the treadmill is stopped, press the “PROG”key until select” FAT “and enter into body fat function, then press “MODE” key to set the parameter.

A:

B:

C:

D:

E:

F1means Sex, the 1(male), 2(female). If the window display 1, which shows you, selects “Male”, the original is Male

F2, means Age, the range is 1-99, and the original is 25.

F3, means Height, the range is 100-220CM(39-87inch), the original is 170CM(67inch)

F4, means Weight, the range is 20-150KG(44-330bound),the original is 70KG(154bound)

F5, mean BMI, show you enter into body fat function. Put two hands on the handle bar, wait for 8 seconds, and the window will show the BMI. Take the Asian people for example, BMI under 18 is under weight;

Between 18 and 14 is normal weight;

Between 25 and 28 is over weight;

And over 29 is obesity.


ENG

21

CONTROL PANEL

METRIC-INCH INTERCONVERSION FUNCTION

6.1 Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same time, LED displays “M”, it changes kilometers into miles.

6.2 Pull out the safety key and press the “PROGRAM” key and “MODE” key at the same time, LED displays “KM”, it changes miles into kilometers.

HRC PROGRAM

1. HRC defaults to three parts, HRC1 limits the speed of 9 km / h, HRC2 limits the speed of 11 km/h,

HRC3 is limited to 13 km/h.

2. HRC set method,sequence, parameter range, press the program key to display HRC, press the mode to confirm and enter the next setting, press the speed key to adjust, set the last parameters to start.

3. Age setting range:13-80 years old

4. Target HRC setting range:80-180

5. Max HRC data: not over 220 - Age.

6. Bad HRC =(Target HRC-User’s HRC)

7. Speed change relationship;

A: Change frequency, HRC test the heart rate data every 30 seconds (Heart rate data keep displaying)

B: When the user’s heart rate is lower than the target heart rate of 30 beats / min, the speed

C: increases by 2.0 km / h.

When the user’s heart rate is lower than the target heart rate 6-29 times / minute, the

D:

E:

G: speed increased by 1.0 km / h.

When the user’s heart rate is higher than the target heart rate 30 times / min, the speed reduced by 2.0 km / h.

When the user’s heart rate is higher than the target heart rate 6-29 times / min, the speed reduced by 1.0 km / h.

When the user’s hearth rate is higher or lower than the target hearth rate 0 - 5 times minute, the speed remains the same.


ENG

22

CONTROL PANEL

8. When the following conditions occur, the treadmill decelerates to a minimum within 20 seconds and stops after 15 seconds at the lowest speed and rings every second;

A: Every 30 seconds to detect a heart rate, when the two consecutive heart rate can not be detected.

B:

C:

1 km / h (0.6 mph), heart rate leads to deceleration.

When the heart rate exceeds (220 - set the age). 1 km / h (0.6 mph), deceleration can not be less than 1 km / h (0.6 mph), such as: treadmill minimum speed of 1 km / h (0.6 mph), when the treadmill run at 1.6 km / h (1.0 mph) and slow down to 1 km / h (0.6 mph) when the heart rate is decelerating 1.0 (2.0) km / h.

Incline not change when running, can be manually set. It will start to caculate in 1 minute.

ECO FUNTION

Press the “ECO” key to enter into ECO mode. The treadmill will increase 3 levels based on the current incline level. The min. incline level is 3. Press again the “ECO” key to quit the ECO mode. Treadmill will decrease 3 levels based on the current incline, the min. incline is 0. In every time using, the default of treadmill is not in the ECO mode.


ENG

23

KINOMAP

This application operates with a phone or tablet and can be connected to bluetooth to the treadmill. With this fitness app you can train with realistic videos such as the Tour de

France, Marathon of New York etc. Each route has its own level of difficultly. There can also be trained together by switching to multi-player mode and there is possibility to compete against each other.

De Kinomap is free for a limited number of videos. To access all videos, a subscription must be closed.

Download the Kinomap app in the App Store or in Google Play Store by entering

“Kinomap” in the search bar or follow one of the links below:

Apple IOS App Store:

https://itunes.apple.com/us/app/kinomap/id611177969

Google Android Play Store:

https://play.google.com/store/apps/details?id=com.kinomap.training&hl=en


ENG

24

PROGRAM SPEED TABLE


ENG

25

PROGRAM SPEED TABLE


ENG

26

TRAINING INSTRUCTIONS

A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two and preferably three times a week, resting for a day between workouts. After several months, you can increase your workouts to four or five times per week.

WARM-UP

The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in place.

STRETCHING

Stretching while your muscles are warm after a proper warm-up and again after your strength or aerobic training session is very important. Muscles stretch more easily at these times because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds. DO NOT BOUNCE.

Inner thigh stretch

Toe touch

Achilles stretch

Hamstring stretch

Side stretch

COOLING DOWN

The purpose of cooling down is to return the body to its normal or near normal, resting state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to return to the heart.


ENG

27

EXPLODED DRAWING

LOOPBAND AFSTELLEN


ENG

28

PART LIST

# Description

01 Base frame

02 Platform frame

03 Incline frame

04 Upright post (L)

05 Upright post (R)

06 Console frame

07 Display frame

08 Motor installation panel

09 Outer telescopic tube

10 Pedal

11 Hex half head screw M12XΦ14X35X19

12 Allen C.K.S. half thread screw M8X40X20





17 Allen C.K.S. full thread screw M8X20



20 Allen Column full thread screw M8X15

21 Allen Column full thread screw M8X75

22 Allen countersunk head full thread screw M6X30XΦ16

23 Motor bolt -1 M8X65

24 Hex full head screw M8X75

25 Philips C.K.S. self-tapping screw ST4X16


27 Phillips countersunk head self-tapping screw ST3X10

28 Phillips countersunk head self-tapping screw ST4X15

29 Philips C.K.S. full head screw M5X10

30 Philips C.K.S. full head screw M4X10



ENG

12

6

9

35

2

2

1

8

8

1

2

3

3

1

2

10

2

4

4

1

1

2

1

1

Quantity

1

1

1

1

2

1

1

29

PART LIST

# Description

32 Philips pan head self-tapping screw ST3X25

33 Philips C.K.S. self tapping screw ST4X12

34 Flat washer Φ8

35 Flat washer Φ10

36 Flat washer Φ14

37 Spring washer Φ8

38 Spring washer Φ5

39 Hex locked nut M8

40 Hex locked nut M10

41 Feet pad adjustment Φ35X37X12XM8

42 Plastic flat washer Φ24XΦ16Xt2.0

43 Taper feet pad Φ23XΦ18XΦ5Φ11

44 Cushion 35X35xt0.5XΦ8

45 Cushion Φ30X30XM6X6

46 Serrated kicj wasger Φ5

47 Incline axle Φ25XΦ17XΦ10X6X1

48 Side rail guider Φ25XΦ5X4.5

49 Wire protector

50 Front roller

51 Rear roller

52 Cylinder

53 Motor

54 Incline motor

55 Running deck

56 Running belt

57 Motor belt

58 Side rail

59 Console upper cover

60 Console lower cover

61 Panel

62 Handle bar


ENG

1

2

1

1

1

2

1

1

1

1

1

1

1

1

4

12

6

3

2

4

4

2

9

3

Quantity

4

14

19

2

3

3

2

30

PART LIST

# Description

63 Base cover ( L ) - 1

64 Base cover ( L ) - 2

65 Base cover ( R ) - 1

66 Base cover ( R ) - 2

67 End cap

68 Motor cover

69 Main frame front cover

70 Power Metallurgy set

71 Curved pipe plug

72 Hollow tubes plug

73 Column spring

74 Inner telescopic tube - 1

75 Wheel

76 Wheel

77 Magnetic ring

78 Control set

79 Speed sensor

80 Wire

81 Wire

82 Wire

83 Handle pulse

84 Handle pulse wire

85 Controller

86 Safety key

87 Power cord

88 Power cord

89 Wire ( Ground wire )

90 Wire ( Ground wire )

91 Rocker switch

92 Automotive switch

93 Power cord


ENG

1

1

1

1

2

1

1

2

1

2

2

1

1

1

1

1

2

1

1

2

Quantity

1

1

1

1

1

1

1

2

2

1

1

31

PARTS LIST

# Description

94 Plug

95 Cable clamp

96 Wire clip


98 Allen C.K.S. full thread screw M8X20

Quantity

1

2

1

2

2


ENG

32

For questions or missing parts please contact your dealer.

ENG

VIRTUFIT Elite TR-1000i User Manual

Elite TR-1000i Treadmill

User manual

INDEX

SAFETY INSTRUCTIONS

WARNING: We suggest that you should consult with your health professional before starting your workout, especially for the age up to 35 old or people with health problems. We do not take responsiblity for any problems or injuries if you don’t follow our instructions.

ATTENTION

SAFETY INSTRUCTIONS

CHECKLIST

TOOL KIT

CHECKLIST

TOOL KIT

ASSEMBLY INSTRUCTIONS

STEP 1

ASSEMBLY INSTRUCTIONS

STEP 2

ASSEMBLY INSTRUCTIONS

STEP 3

ASSEMBLY INSTRUCTIONS

STEP 4

ASSEMBLY INSTRUCTIONS

STEP 5

FOLDING INSTRUCTION

PUSH UP

UNFOLDING

FOLDING INSTRUCTION

MAINTENANCE TREADMILL

LUBRICATING THE BELT

MAINTENANCE TREADMILL

RUNNING BELT ADJUSTMENT

PROBLEM SOLUTIONS

CONTROL PANEL

CONTROL PANEL

CONTROL PANEL

MP3 OPERATION INSTRUCTION

SAFETY GUIDE

CONTROL PANEL

MANUAL MODE

CONTROL PANEL

PROGRAM SETTING

BODY FAT FUNCTION

CONTROL PANEL

METRIC-INCH INTERCONVERSION FUNCTION

HRC PROGRAM

CONTROL PANEL

ECO FUNTION

KINOMAP

PROGRAM SPEED TABLE

PROGRAM SPEED TABLE

TRAINING INSTRUCTIONS

WARM-UP

STRETCHING

COOLING DOWN

EXPLODED DRAWING

LOOPBAND AFSTELLEN

PART LIST

PART LIST

PART LIST

PARTS LIST

Related manuals

Frontier

FRB210

Gymstick

RUN 10.0

Insportline

Treadmill Akamar

DC Athletics

performance 5.0

Gymstick

PRO20.0 Treadmill

Lifespan Fitness

TR5500iM

DC Athletics

Trail Blazer I

INTERSPORT

ENERGETICS PR 11.0

VIRTUFIT

TR-100

VIRTUFIT

TR-75