advertisement
Voltage Monitoring Type SW
DC Limit Relay for Standard Signals
DC 0/4 - 20 mA, 0/2 - 10 V
STW1000V2
Part number:
S225677 AC/DC 24- 240 V
ZIEHL STW1000V2 current relays monitor standard signals from instrument transformers for compliance with a limit value.
Units can be wired in series
(current) or in parallel (voltage) to monitor multiple limits.
Measurement inputs for 0/4-20 mA and 0-10 V, adjustable hysteresis and switching delays plus the selection facility to choose between the normally closed current and normally opened current principle for the relay make it a universal limit switch.
Application:
Monitoring nearly any measured quantity in connection with instrument transformers, e.g., in plants and controls.
•
•
•
•
•
•
•
•
•
•
•
Measurement inputs 0-20 mA
/ 0-10 V, switchable to 4-20 mA / 2-10 V
Limit adjustable 0-100 %
Hysteresis adjustable 5-30
%
On-delay adjustable 0.1...
10 s
Response-delay adjustable
0.1... 10 s
Output relay 1 change-over contact
Operating or close-circuit current with bridge selectable
LEDs for service condition display
Universal power supply AC/
DC 24-240 V
Panel mounted distributor housing 35 mm wide (2 TE),
Installation height 55 mm
1) 0...20 mA, 0...10 V
2) 4...20 mA, 2...10 V
3) Ruhestrom / closed current
4) Arbeitsstrom / operating current
Technical Data
Rated supply voltage Us AC/DC 24 - 240 V, 0/50/60 Hz, < 2W, < 3VA
(DC 20,4 - 297 V, AC 20 - 264 V)
Output relay
Type of contact
Test conditions
1 change-over contact
Typ 3 see "general technical information " see "general technical informations "
Function
Measurement inputs
Switch point/limit
Hysteresis
Adjustment error
Repeatability
Temperature influence
On-delay don
Response-delay doff
Rated ambient temperature range
Dimensions H x W x D
Attachment
Protection housing / terminals
Weight
Maximum
DC 0/4 ... 20 mA, 20 Ω
DC 0...10 V, 63 kΩ adjustable 0...100% adjustable 5...30% of set value
< 10% of span
< 0,2%
≤ 0,05 %/K adjustable 0,1...10 sec.
adjustable 0,1...10 sec.
-20°C…+55°C
Design V2: 90 x 35 x 58 [mm], mounting height 55 mm on 35 mm DIN rail EN 60 715 or screws M4
OP 30 / IP 20 app. 130 g
70
ZIEHL industrie-elektronik, 74523 Schwäbisch Hall, Germany, +49 791 504-0, [email protected], www.ziehl.de
2018-04-05
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project