9-PIECE

FOOT ATTACHMENT SET

• Glide Foot

• Couching Foot

(Small, Medium, Large)

• Square Foot

• Diamond Foot

• Round Echo Feet

(3/4 in, 1 in, 1 1/2 in)

COMPATIBLE WITH

,

&

9-PIECE

FOOT ATTACHMENT SET

6 36343 17179 6

Copyright January 21, 2021

Jim M. Bagley, GraceWood, Inc

(Reproduction Prohibited)

Version 1.2

9-PIECE

FOOT ATTACHMENT SET

• Glide Foot

• Couching Foot

(Small, Medium, Large)

• Square Foot

Phone- 1-800-264-0644 www.graceframe.com

• Diamond Foot

• Round Echo Feet

(Small, Medium, Large)

COMPATIBLE WITH

&

9-PIECE

FOOT ATTACHMENT SET

6 36343 17179 6

B

2

Accessory Feet

Parts List:

Tools Needed: 3mm Allen Wrench.

1

B

Accessory

Presser Foot

M3 x 8mm SBHCS

Accessory Presser Foot Is used for attaching the different types of inserts depending on what style of sewing you desire.

A

UNLESS OTHERWISE SPECIFIED:

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

DRAWN

CHECKED

ENG APPR.

NAME DATE

TITLE:

A

MFG APPR.

Couching

Insert Small

WITHOUT THE WRITTEN PERMISSION OF

<INSERT COMPANY NAME HERE> IS

PROHIBITED.

NEXT ASSY

2

USED ON

INTERPRET GEOMETRIC

TOLERANCING PER:

MATERIAL

Q.A.

SIZE

M3 Thumb Screw

1

REV

Couching Insert decorative stitch.

Is used for adding couched embellishments to your fabric and to easily add a

Glide Insert

Glide Insert Is used to easily glide around applique embellishments, or other dimensional elements on a quilt.

2

Hopping Foot

Height Gauge

Parts List Continued:

Tools Needed: 3mm Allen Wrench.

Echo Insert .75 in Echo Insert 1 in Echo Insert 1.5 in

Echo Insert Is used for echo quilting around rulers for equal spacing.

Square Insert Diamond Insert

Square Insert Is used for quilting around rulers for straight and angled lines.

Attaching Accessory Feet

Unlocked

Accessory Foot

Locked

1. Attach each insert by pressing each insert on from the bottom of the Accessory Foot.

2. When the insert has been pushed in firmly twist the insert until it snaps in place.

3

2 1

B B

Attaching Accessory Presser Foot

M3 x 8 mm SBHCS

M3 x 8 mm SBHCS

A

Standard

Presser Foot

1. To remove the Standard

Presser Foot take the

3mm allen wrench and turn it counterclockwise and remove the M3 x

8 mm SBHCS and the presser foot.

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

<INSERT COMPANY NAME HERE>. ANY

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

<INSERT COMPANY NAME HERE> IS

PROHIBITED.

2

NEXT ASSY

4

APPLICATION

USED ON

Accessory

Presser Foot

Hopping Foot

Height Tool

2. Attach the Accessory

Presser Foot insert on to

UNLESS OTHERWISE SPECIFIED:

SBHCS clockwise using

DIMENSIONS ARE IN INCHES

TOLERANCES:

FRACTIONAL

ANGULAR: MACH BEND

TWO PLACE DECIMAL

THREE PLACE DECIMAL

3. Set hopping foot height: move the machine off of the fabric and drop the needle to the lowest position. Slide the the

DRAWN beneath the foot. Tighten

CHECKED with the 3 mm Allen

ENG APPR.

MFG APPR.

NAME

INTERPRET GEOMETRIC

TOLERANCING PER:

MATERIAL

Q.A.

COMMENTS:

FINISH

DO NOT SCALE DRAWING

DATE

TITLE:

SIZE

A

DWG. NO.

REV

sewing machine

SCALE: 1:12 WEIGHT: SHEET 1 OF 1

1

A

Threading Couching Foot

1. Start in the front of your fabric, do needle up and down so Bobbin Thread can be pulled through fabric.

Sewing Thread

Bobbin Thread

2. Hold Sewing Thread and move Sewing Machine to pull Bobbin Thread up through the fabric.

5

6

Specialty Thread Specialty Thread

Sewing Thread Sewing Thread

3. Loop the Specialty Thread behind the Sewing Thread so that the two strands are facing toward you. Pull Specialty Thread slightly so it is in front of the needle. Do a needle up and down to create an anchor point.

Specialty Thread

Bobbin Thread

Sewing Thread

Couching Foot

4. While holding both Sewing Thread and Bobbin Thread, move the Sewing

Machine away from you to pull the Specialty Thread through the Couching Foot.

Specialty Thread

Bobbin Thread

Sewing Thread

Couching Foot

Note: If it is to hard to pull the Specialty Thread through the Couching Foot try using a bigger size Couching Foot. If Specialty Thread isn’t catching stitches in corner use a smaller Couching Foot.

7

8

Thread Guide

Specialty Thread

5. Thread the longer Specialty Thread strand in the Thread Guide.

Note: Leave slack in the Specialty Thread for best quality stitching.