PAMP1000

80W X 2 MAX

STEREO POWER AMPLIFIER

IMPORTANT SAFETY INSTRUCTIONS

1.

Read Instructions — All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions — The safety and operating instructions should be retained for future reference.

3. Heed Warnings — All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions — All operating and use instructions should be followed.

5. Water and Moisture — The appliance should not be used near water -for example, near a bathtub, washbowl, kitchen sink, laundry tub,

swimming pool, or a wet basement.

6. Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the

appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings: or placed in a built-in

installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

7. Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

8. Power Sources — The appliance should be connected to a power supply only of the type described in the operating instructions or

as marked on the appliance.

9. Grounding or Polarization — Precaution should be taken to insure that the grounding or polarization means of an appliance is not defeated.

10. Power-Cord Protection — Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the

appliance.

11. Cleaning — The appliance should be cleaned only as recommended by the manufacturer.

12. Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or

power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should

be taken to keep from touching such power lines or circuits as contact with them might be fatal.

13. Nonuse Periods — The power cord of the appliance should be unplugged from the outlet when the appliance is

to be left unused for a long period of time.

14. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

15. Carts and Stands — If the appliance is used with a cart or stand, the cart or stand should be a type recommended by

the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces cause the appliance and cart combination to overturn.

16. Mounting — The appliance should be mounted only as recommended by the manufacturer.

17. Damage Requiring Service — The appliance should be serviced by qualified service personnel when:

A. The power-supply cord or plug has been damaged.

B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.

C. The appliance has been exposed to rain.

D. The appliance has been dropped, or the enclosure damaged.

E. The appliance does not appear to operate normally or exhibits a marked change in performance.

18. Servicing — The user should not attempt to service the appliance beyond that described in the user’s operating instructions. All other

servicing should be referred to qualified personnel.

19. Overloading — Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

20. Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. Safety Check — Upon completion of any service or repairs to this appliance, ask the service technician to perform safety checks to

determine that the appliance is in proper operating condition.

WARNING:

To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified personnel.

This symbol is intended to alert you to the - 6 presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this product.

Your new PYLE HOME PAMP Amplifier

gives you the power and versatility you need in a professional sound system.

The wide frequency response of it handles easily amplification of voice and music.

The signal sensing of dual inputs turns the amplifier on automatically when music is sensed on RCA inputs. The activation of Line 1 input that will override Line 2 input makes the amplifier perfectly as a zone amplifier for a multiroom distribution audio system.

FEATURES AND CONTROLS

FEATURES AND CONTROLS

CONNECTION DIAGRAM-A:

In this application the TV audio signal acts as "Priority" source at Line 1 input and a distributed audio signal from the other audio system acts as "Primary" source at Line

2 input. Whenever the TV is activated, its signal overrides the distributed signal of

Line 2, only the TV audio will be heard via the amp, but the distributed audio of Line

2 input will still be present at Line 2 Output and sent to additional zone. Once TV is turned off, the amp will switch to the distributed audio automatically as an audio source, if the distributing audio is still active.

CONNECTION DIAGRAM-B:

In this application a computer's sound card acts as "Priority" source at Line 1 input and the TV audio signal acts as "Primary" local source at Line 2 input. Whenever the computer is activated, its signal overrides the TV signal of Line 2, only the computer audio will be heard via the amp. Once the computer is turned off, the amp will switch to the TV automatically as an audio source, if the TV is still active.

Specifications

Input Impedance, balanced (unbalanced) ............................. 20 k-Ohms

Continuous Output Power

Stereo Mode

20 Hz to 20 kHz, 8 Ohms .................................................. 60 Watts x 2

1 kHz, 4 Ohms, ................................................................. 70 Watts x 2

Maximum Power, 8 Ohms.................................................. 65 Watts x 2

Maximum Power, 4 Ohms.................................................. 80 Watts x 2

Bridged Mode

Maximum, 20 Hz to 20 kHz, 8 Ohms ......................................130 Watts

Maximum, 1 kHz, 4 Ohms, .....................................................160 Watts

THD at rated output power............................................................ 0.1%

Frequency Response +/- 3 dB.......................................10 Hz to 50 kHz

Signal to Noise Ratio A-Weighted.................................................100dB

Speaker Impedance

Stereo.................................................................................. 4-16 Ohms

Bridged................................................................................ 8-16 Ohms

Speaker Impedance...................................................... A,B (4-16 ohms)

Bridged (8-16 ohms)

Power Requirement.................................120V AC 60Hz/230V AC 50Hz

Power Fuse.............. T 4AL 250V for 110-120V and T 2AL for 220-240V

Dimensions, inches (mm) WxHxD .. 16.53 x 2.36 x 8.26 (420 x 60 x 210)

Weight, lbs (kg) ..................................................................... 9.08(4.12)

Specifications are typical; individual units might vary.

Specifications are subject to change and improvement without notice.

PYLE AMPLIFIERS CAR AMPLIFIERS