DSE RE-TCC5E Owner's Manual

Side panel

Document:

RE-TCC5E 1G1

Page:

1

RE-TCC5E Color Wired cameras

OWNER'S MANUAL

Product description

The camera RE-TCC5E camera has a resolution of 700 lines based chipset DSP-E SONY

EFFIOE and OSD menus designed to analogue CCTV applications requiring the highest video quality.

Main features:

SONY SUPER HAD CCD 1/3 '' Resolution 650 TV lines Minimum Illumination 0.001

Lux in B / W function day / night to night vision B / W and compatibility with IR illuminators

ADAPTIVE TONE REPRODUCTION - The ATR feature allows better color rendering in dim shooting.

Horizontal Mirror function for the image in the back shooting. the overturning

OSD (On Screen Display), programming via onscreen MENU controllable with buttons through remote control on the cable.

Titler for camera

Stamping number

rear connections

Input for autoiris lens - The camera is capable of controlling autoiris Direct Drive objectives whose control cable connects to the side grip on the camera.

Side Door, OSD control buttons - buttons protected by the side cover are used to control the configuration menu on the camera screen. With the middle button you enter the camera setup menu, with the other buttons you move between menu items.

Fixing - The camera is provided without bracket which must be purchased separately. The thread for the bracket is available under the camera both above for ceiling mounting.

Power to the camera

On the back of the camera there is the terminal block for the power supply (POWER). Inside the box we can find a cable to be connected to the terminal, this cable has the pin at the other end to be connected to the power supply. We must connect a 12VDC power supply by at least 1A with a

5.5 mm plug. center-positive, as the RE-AL4S model.

Video OUT

DC 12V

LED PL

TP-CV

BNC connector for video output

Terminal block for 12VDC power supply. Supplied with cable socket for DC plug

5.5 mm

Power LED

Selector - TP position not active

TERMINAL NC NC TP + TP is not used in this version.

BNC video output - Bottom right you connect a cable leading to monitors or management devices typically using RG59 coaxial cable type and the like, and BNC connector.

DC12V - Connect 12VDC power supply by at least 1A with a 5.5 mm plug with a positive central STABILIZED, such as RE-AL4S model, using this cable in the package (cable red + / black cable -). Or connect directly to the positive and negative power supply terminal.

Switch TP / CV - Keep the switch CV- The TP position is not used at the time.

Terminal C / NC / TP + / TP - not enabled at the time

Attention to use STABILIZED feeders that provide 12V in any load condition. The use of a different supply voltage from 12VDC can generate video disorders and in the worst cases damage the camera.

If you carried out a centralized power pay attention to too long power cables, which could introduce excessive voltage drop. Beware too long power cables in the transport of

12VDC, that could to introduce excessive voltage drop.

Connect the video

The video output is on the rear of the camera and has a BNC type connector. It must be connected to the monitor or video management device. If the distance to be covered is a few meters you can use any type of cable. But if you go over 10 meters we recommend using the coaxial cable type RG59 or similar which also allows the wiring over a hundred meters.

Attach the lens

These cameras are supplied without lens so that you can equip with the lens more suited to the size and to the ambient brightness. The attack to the target is C / CS type. The goal must be purchased separately and is screwed on the front of the camera. If the lens is of the iris type must be connected to the connector socket to the rear view camera. The camera is capable of controlling autoiris Direct Drive goals. If you need to bring their own to the connector solder these are the PIN to use:

DSE - ITALY - WWW.DSE.EU

OWNER'S MANUAL

PIN DIRECT

1 DAMP - 2

DAMP + 3

DRIVE + 4

DRIVE -

Once the lens is screwed, it is necessary to proceed to the focus adjustment.

First, you must adjust the focal distance from the CCD by acting on the lever on the side of the camera to obtain a first commissioning coarse fire. The side lever must be unscrewed about half a turn in order to rotate the ring. Once in a distance that allows an acceptable vision hangs the ring by screwing the pin. At this point it is possible to refine the vision by turning the focus adjustment of the lens to obtain the best focus.

Document:

RE-TCC5E 1G1

Page:

2

RE-TCC5E Color Wired cameras

Programming Menu

The camera is equipped with a programming menu screen for advanced features. Open the side door to access the panel, press the button in the center between the arrows to display the on-screen menu.

For instructions on features of the OSD Refer to the separate documentation on the DSP-E

SONY EFFIO

Audio

The RE-TCC5E camera does not have onboard microphone; If required you can use the external microphone RE-CM2.

Main technical data

Camera Type

Colors / white / black video standards

CCD Sensor

Number of pixels in the CCD horizontal Resolution

Video Signal Process

Video Signal Synchronization

Minimum required illumination for shooting gamma correction

Signal / noise ratio (S / N ratio)

Automatic Gain Control (AGC)

Automatic electronic shutter iris diaphragm

Compensation against the light (BLC)

Day / Night function (color day / night bn) infrared lighting compatible video Output audio Output built-in ambient microphone the camera power supply

Power consumption

Power supply 230VAC / 12VDC included

Support bracket included

Target

MIRROR function for image reversal overlay

MASK function for privacy protection

Motion detection

Operating temperature

External dimensions (mm.)

Weight

RE-TCC5E hard-wired color day night function

PAL 2: 1 interlace

Sony 1/3 '' Super HAD

1020 (L) x596 (H)

With 650 TV lines.

Digital - DSP internal

Color 0.3 Lux B / N

0.0001 Lux

0.45 / 1

Over 50 dB

Yes (programmable level)

Automatic or fixed adjustable

Compatible with DC DRIVE lenses

Yes (adjustable level)

Yes (adjustable threshold)

850 nm

1V pp composite video 75

Ohms

-

No

DC 12V

2 W

No

No

No

Horizontal

ID Camera, Motion

4 programmable masks

You - Only display screen

- 10 ° ... + 50 ° C

56 (L) x71 (H) x133 (P)

480 gr.

DSE - ITALY - WWW.DSE.EU