advertisement
Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with
ESD protection Leadshine 2 m
Beskrivning
This USB to serial RS-232 RJ12 adapter cable by Delock is suitable with the ProTuner software for configuration, control, monitoring etc. of the servo and stepper motors by
Leadshine.
Compatible Devices:
Stepper motors:
DM432C, DM442, DM556, DM856 3DM683 AM882
DM1182 DM2282
Servomotors:
DCS810, DCS810S, ACS306, ACS606, ACS806
Artikelnummer 66737
EAN: 4043619667376
Ursprungsland: China
Paket: • Zippåse
Specifikationer
• Connectors:
1 x USB 2.0 Type-A male
1 x Serial RS-232 RJ12 plug
• Chipset: FTDI FT231X
• Plug & Play
• ESD protection:
• FIFO: 512 Byte - TX
• FIFO: 512 Byte - RX
• Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
• Data transfer rate up to 230.4 Kb/s
• Signals: RXD(3), GND(4), TXD(5)
• ESD protection IEC 61000-4-2
HCP & VCP: ±4 kV
Air Discharge: ±8 kV
Contact Discharge: ±4 kV
• Colour: black
• Cable length incl. connectors: ca. 2.0 m
• Suitable for various devices by Leadshine
Systemkrav
• Windows 8.1/8.1-64/10/10-64
• PC or laptop with a free USB Type-A port
Paketets innehåll
• Adapter cable USB 2.0 Type-A to RS-232 RJ12
Bilder
General
Specifikationer:
Supported operating system:
Interface
Kontakt 1:
Kontakt 2:
Technical characteristics
Kringkretsar:
Dataöverföringshastighet:
FIFO:
Signal transmission:
UART:
Physical characteristics
Cable length incl. connector:
Färg:
Overvoltage protection:
RS-232 (EIA / TIA)
USB 2.0
Windows 10 32-bit
Windows 10 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
1 x USB 2.0 Typ-A, hane
1 x RJ12 plug
FTDI FT231XS bis zu 230,4 Kbps
2 x 512 Byte
TxD, RxD und GND
USB to serial UART
2 m svart
±8 kV EN / IEC 61000-4-2 Air Gap Discharge
±4 kV EN / IEC 61000-4-2 Contact Discharge
±4 kV EN / IEC 61000-4-2 VCP & HCP
Powered by TCPDF (www.tcpdf.org)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement