advertisement
ITALIANO
Questo prodotto è coperto da garanzia Atlantis della durata di 2 anni. Per maggiori dettagli in merito o per accedere alla documentazione completa in Italiano fare riferimento al sito www.atlantis-land.com.
ENGLISH
This product is covered by Atlantis 2 years warranty. For more detailed informations please refer to the web site www.atlantis-land.com.
For more detailed instructions on configuring and using this device, please refer to the online manual.
FRANCAIS
Ce produit est couvert par une garantie Atlantis de 2 ans. Pour des informations plus détaillées, référez-vous svp au site Web www.atlantis-land.com.
DEUTSCH
Dieses Produkt ist durch die Atlantis 2 Jahre Garantie gedeckt. Für weitere
Informationen, beziehen Sie sich bitte auf Web Site www.atlantis-land.com.
ESPAÑOL
Este producto esta cubierto por Atlantis con una garantía de 2 años. Para mayor información diríjase a nuestro sitio Web www.atlantis-land.com.
2
ITALIANO
2. CONTENUTO DELLA CONFEZIONE ................................................................... 11
3. INSTALLAZIONE SOFTWARE (Windows) ........................................................... 11
APPENDICE A: Connessione usando il Client di Windows ........................................ 16
ENGLISH
4.1 Hardware Installation for USB Adapter ...................................................... 24
APPENDIX A: Connect to a network using Windows client....................................... 27
FRANCAIS
5. LOGICIEL DE CONFIGURATION POUR WINDOWS ............................................. 35
3
APPENDICE A: Configuration de la connession sans fils en utilisant l’utilitaire de
APPENDIX
A02-UP-W300N(v2.0)_GX01 (v1.01 Sept 2012)
4
AVVERTENZE
Abbiamo fatto di tutto al fine di evitare che nel testo, nelle immagini e nelle tabelle presenti in questo manuale, nel software e nell'hardware fossero presenti degli errori. Tuttavia, non possiamo garantire che non siano presenti errori e/o omissioni.
Infine, non possiamo essere ritenuti responsabili per qualsiasi perdita, danno o incomprensione compiuti direttamente o indirettamente, come risulta dall'utilizzo del manuale, software e/o hardware.
Il contenuto di questo manuale è fornito esclusivamente per uso informale, è soggetto a cambiamenti senza preavviso (a tal fine si invita a consultare il sito www.atlantisland.it
o www.atlantis-land.com
per reperirne gli aggiornamenti) e non deve essere interpretato come un impegno da parte di Atlantis che non si assume responsabilità per qualsiasi errore o inesattezza che possa apparire in questo manuale. Nessuna parte di questa pubblicazione può essere riprodotta o trasmessa in altra forma o con qualsiasi mezzo, elettronicamente o meccanicamente, comprese fotocopie, riproduzioni, o registrazioni in un sistema di salvataggio, oppure tradotti in altra lingua e in altra forma senza un espresso permesso scritto da parte di
Atlantis. Tutti i nomi di produttori e dei prodotti e qualsiasi marchio, registrato o meno, menzionati in questo manuale sono usati al solo scopo identificativo e rimangono proprietà esclusiva dei loro rispettivi proprietari.
Restrizioni di responsabilità CE/EMC
Il prodotto descritto in questa guida è stato progettato, prodotto e approvato in conformità alle regole EMC ed è stato certificato per non avere limitazioni EMC.
Se il prodotto fosse utilizzato con un PC/apparati non certificati, il produttore non garantisce il rispetto dei limiti EMC. Il prodotto descritto è stato costruito, prodotto e certificato in modo che i valori misurati rientrino nelle limitazioni EMC. In pratica, ed in particolari circostanze, potrebbe essere possibile che detti limiti possano essere superati se utilizzato con apparecchiature non prodotte nel rispetto della certificazione EMC. Può anche essere possibile, in alcuni casi, che i picchi di valore siano al di fuori delle tolleranze. In questo caso l’utilizzatore è responsabile della
“compliance” con i limiti EMC. Il Produttore non è da ritenersi responsabile nel caso il prodotto sia utilizzato al di fuori delle limitazioni EMC.
CE Mark Warning
In un ambiente domestico il dispositivo può causare interferenze radio, in questo caso è opportuno prendere le adeguate contromisure.
Dichiarazione di Conformità
Questo dispositivo è stato testato ed è risultato conforme alla direttiva 1999/5/CE del parlamento Europeo e della Commissione Europea, a proposito di apparecchiature radio e periferiche per telecomunicazioni e loro mutuo
5
riconoscimento. Dopo l’installazione, la periferica è stata trovata conforme ai seguenti standard: EN 300.328(radio), EN 301 489-1, EN 301 489-17(compatibilità elettromagnetica) ed EN 60950(sicurezza). Questa apparecchiatura può pertanto essere utilizzata in tutti i paesi della Comunità Economica Europea ed in tutti i paesi dove viene applicata la Direttiva 1999/5/CE, senza restrizioni eccezion fatta per:
Francia(FR):
Se si utilizza all’aperto tale dispositivo, la potenza in uscita è limitata
(potenza e frequenza) in base alla tabella allegata. Per informazioni ulteriori consultare
www.art-telecom.fr
.
Luogo
Chiuso (senza restrizioni)
Aperto
Banda di Frequenze(MHz)
2400-2483,5
Potenza (EIRP)
100mW(20dBm)
2400-2454
2454-2483,5
100mW(20dBm)
10mW(10dBm)
Se l’uso di questa apparecchiatura in ambienti domestichi genera interferenze, è obbligo dell’utente porre rimedio a tale situazione.
Italia(IT):
Questa periferica è conforme con l’Interfaccia Radio Nazionale e rispetta i requisiti sull’Assegnazione delle Frequenze. L’utilizzo di questa apparecchiatura al di fuori di ambienti in cui opera il proprietario, richiede un’autorizzazione generale.
Per ulteriori informazioni si prega di consultare:
www.comunicazioni.it
.
Lussemburgo:
Se utilizzato per servizi network o privati è da richiedere l’autorizzazione.
Norvegia (NO):
apparecchiatura da non utilizzare in un aresa geografica di 20 km di raggio nei pressi di Ny Alesund .
Russia (CCP):
solo per uso interno.
Dichiarazione di Conformità Sintetica
Con la presente dichiariamo che questo apparato è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttive 1999/5/CE. La dichiarazione di conformità nella sua forma completa è disponibile presso il sito www.atlantis-land.com
(alla pagina del prodotto) o può essere richiesta a [email protected].
6
Importanti informazioni per il corretto riciclaggio/smaltimento di questa apparecchiatura
Il simbolo qui sotto indicato, riportato sull'apparecchiatura elettronica da Lei acquistata e/o sulla sua confezione, indica che questa apparecchiatura elettronica non potrà essere smaltita come un rifiuto qualunque ma dovrà essere oggetto di raccolta separata.
Infatti i rifiuti di apparecchiatura elettroniche ed elettroniche devono essere sottoposti ad uno specifico trattamento, indispensabile per evitare la dispersione degli inquinanti contenuti all''interno delle apparecchiature stesse, a tutela dell'ambiente e della salute umana. Inoltre sarà possibile riutilizzare/riciclare parte dei materiali di cui i rifiuti di apparecchiature elettriche ed elettroniche sono composti, riducendo così l'utilizzo di risorse naturali nonché la quantità di rifiuti da smaltire.
Atlantis, in qualità di produttore di questa apparecchiatura, è impegnato nel finanziamento e nella gestione di attività di trattamento e recupero dei rifiuti di apparecchiature elettriche ed elettroniche compatibili con l'ambiente e con la salute umana.
E' Sua responsabilità, come utilizzatore di questa apparecchiatura elettronica, provvedere al conferimento della stessa al centro di raccolta di rifiuti di apparecchiature elettriche ed elettroniche predisposto dal Suo Comune. Per maggiori informazioni sul centro di raccolta a Lei più vicino, La invitiamo a contattare i competenti uffici del Suo Comune.
Qualora invece avesse deciso di acquistare una nuova apparecchiata elettronica di tipo equivalente e destinata a svolgere le stesse funzioni di quella da smaltire, potrà portare la vecchia apparecchiatura al distributore presso cui acquista la nuova. Il distributore sarà tenuto ritirare gratuitamente la vecchia apparecchiatura 1 .
Si tenga presente che l'abbandono ed il deposito incontrollato di rifiuti sono puniti con sanzione amministrativa pecuniaria da € 103 a € 619, salvo che il fatto costituisca più grave reato. Se l'abbandono riguarda rifiuti non pericolosi od ingombranti si applica la sanzione amministrativa pecuniaria da € 25 a € 154.
Il suo contributo nella raccolta differenziata dei rifiuti di apparecchiature elettriche ed elettroniche è essenziale per il raggiungimento di tutela della salute umana connessi al corretto smaltimento e recupero delle apparecchiature stesse.
7
1 Il distributore non sarà tenuto a ritirare l'apparecchiatura elettronica qualora vi sia un rischio di contaminazione del personale incaricati o qualora risulti evidente che l'apparecchiatura in questione non contiene i suoi componenti essenziali o contiene rifiuti diversi da apparecchiature elettriche e/o elettroniche.
NB: le informazioni sopra riportate sono redatte in conformità alla Direttiva 2002/96/CE ed al D. nonché particolari modalità di trattamento e smaltimento dei rifiuti di apparecchiature elettriche ed elettroniche (RAEE). Per ulteriori informazioni in materia, la invitiamo a consultare il nostro sito www.atlantis-land.com
AVVERTENZE
Utilizzare esclusivamente l’antenna fornita a corredo. Antenne diverse e/o con guadagno differente potrebbero violare le normative vigenti. Atlantis si intende sollevata da ogni responsabilità in caso di utilizzo di accessori (antenne e/o alimentatori) non contenuti nell’imballo.
Lasciare almeno 30cm di distanza tra l’antenna del dispositivo e l’utilizzatore.
La marcatura CE con il simbolo di attention Mark (
) poste sull’etichetta di prodotto potrebbero non rispettare le dimensioni minime stabilite dalla normativa a causa delle ridotte dimensioni di quest’ultima
Il logo WEEE ( ) posto sull’etichetta di prodotto potrebbe non rispettare le dimensioni minime stabilite dalla normativa a causa delle ridotte dimensioni di quest’ultima.
Atlantis invita a visitare il sito web www.atlantis-land.com
alla relativa pagina di prodotto per reperire manualistica e contenuti tecnici (aggiornamenti driver e/o funzionalità, utility, support note) aggiornati.
8
Tutte le condizioni di utilizzo e clausole contenute in questo manuale e nella garanzia si intendono note ed accettate. Si prega di restituire immediatamente (entro 7 giorni dall’acquisto) il prodotto qualora queste non siano accettate.
Per usufruire delle condizioni di garanzia migliorative associate al prodotto (Fast Swap, On Site e On Center)
è opportuno provvedere alla registrazione dello stesso sul sito www.atlantis-land.com entro e non oltre 15 giorni dalla data di acquisto. La mancata registrazione entro il termine di sopra farà si che il prodotto sia coperto esclusivamente dalla condizioni standard di garanzia.
9
La ringraziamo per aver scelto l’adattatore NetFly Wireless, la via più semplice per il
Wireless networking. Questa guida rapida fornisce una panoramica per una rapida installazione del prodotto, per ulteriori dettagli in merito all’installazione e all’utilizzo consultare il manuale in formato elettronico presente sul CDRom.
1. PANORAMICA DI PRODOTTO
Questo dispositivo grazie al pieno supporto delle più recenti specifiche IEEE 802.11n a 300Mbps è in grado di offirire prestazioni senza precedenti, con un importante incremento sia in termini di velocità che di copertura rispetto agli standard precedenti. Il supporto dei sistemi Windows ® VISTA/XP/7, Linux e MAc OS X rende questi adattatori estremamente versatili.
Inoltre, grazie all’integrazione delle specifche WPS, la messa in sicurezza della rete wireless non è mai stata cosi facile; basterà la pressione di un bottone per dire addio a tentativi di accesso non autorizzati.
Queste caratteristiche, unite alla piena compatibilità con gli standard precedenti, permettono finalmente di unire la velocità di una rete cablata alla mobilità di una wireless LAN.
L’adattatore inoltre (su determinati sistemi Windows) supporta una modalità Access
Point che permette al PC con la scheda Wireless USB di funzionare come un vero e proprio Access Point (disponibile solo nei sistemi Windows 7/Vista). In questo modo è possibile costruire una vera è propria rete wireless a costi contenuti.
1.2 Requisiti di sistema
Prima di procedere con l’installazione del prodotto verificare di disporre dei seguenti requisiti:
PC con uno slot USB V2.0/1.1*
Processore Intel ® Pentium ® III 600Mhz o compatibile con 512 MB RAM
Sistema operativo Windows XP/Vista/7, Linux e Mac OS X
45MB di spazio libero su disco
Lettore CD-Rom
Il throughput dell’adattatore Wireless USB è limitato a soli
6Mbps se l’adattatore è collegato ad uno slot USB V1.1.
10
Il prodotto è stato testato con kernel 2.6.18 ~ 2.6.38 e
Kernel 3.0.8. Atlantis non garantisce che il dispositivo funzioni su distribuzioni/kernel diverse da quelle elencate né, dato il vasto numero di combinazioni, potrà offrire supporto. Si invita a tal fine a reperire gli ultimi driver direttamente sul sito del produttore del chipset
( www.realtek.com.tw
) ed eventualmente a contattarlo direttamente (chipset 8192CU).
Il prodotto è stato testato con sistemi Mac OS X
10.4/10.5/10.6/10.7 (basati su CPU Intel). Per ogni problematica si invita preventivamente a reperire gli ultimi driver direttamente sul sito del produttore del chipset
( www.realtek.com.tw
) ed eventualmente a contattarlo direttamente (chipset 8192CU).
2. CONTENUTO DELLA CONFEZIONE
Prima dell’utilizzo, verificare che la scatola contenga i seguenti elementi:
NetFly Wireless USB Adapter
Una guida rapida multilingua (Italiano, Inglese e Francese)
Un Cd-Rom contenente utility/driver e manuale dell’utente (Italiano, Inglese e
Francese)
Coupon di Garanzia e WEEE
Nel caso in cui il contenuto non sia quello sovradescritto, contattare il proprio rivenditore immediatamente.
3. INSTALLAZIONE SOFTWARE (Windows)
Questa sezione descrive la procedura di installazione dei driver e utility. Non collegare NetFly USB al PC prima che il processo di installazione dei driver
lo richieda espressamente.
3.1 Installazione dei driver/utility
Inserire il CD-Rom contenuto nella confezione e attendere l’avvio dell’interfaccia di navigazione.
Cliccare A02-UP-W300N per accedere alla pagina relativa al prodotto.
11
Selezionare il driver per il proprio sistema operativo e seguire le istruzioni visualizzate a schermo per completare l’installazione.
In caso di installazione manuale dei driver/utility, fare riferimento alla cartella versione di sistema operativo utilizzato.
CDRom:\A02-UP-
W300N\Driver\<OS>, dove <OS> rappresenta la
Quando richiesto, durante l’installazione, collegare il dispositivo al PC come da paragrafo 4. Il sistema rileverà ed installerà in maniera automatica il prodotto.
Laddove il CDRom non dovessi avviarsi automaticamente è possibile laciare il file di avvio localizzato in
CDRom:\start.htm.
3.2 Rimozione dei driver/utility
Per disinstallare l’adattatore Wireless effettuare la seguente procedura:
Chiudere eventuali applicazioni attive.
Cliccare sull’icona Risorse del Computer ed andare in Pannello di Controllo.
Cliccare sull’icona Installazioni Applicazioni (Programmi e Funzionalità), evidenziare Realtek Wireless LAN Driver & Utility e cliccare su
Aggiungi/Rimuovi (Disinstalla), confermare poi la procedura di disinstallazione (alternativamente in Programmi->Realtek 11n Wireless LAN
Driver e Utility-> Uninstall).
Al termine della procedura potrebbe essere chiesto un riavvio del PC.
A questo punto, una volta spento il PC, è possibile rimuovere l’adattatore.
4. INSTALLAZIONE HARDWARE
4.1 Installazione modelli USB
Quando richiesto, durante l’installazione, collegare il dispositivo ad una porta USB. Il
Sistema Operativo provvederà ad installare i driver della nuova periferica. Potrebbe essere richiesto un riavvio del sistema operativo.
12
4.2 Verifica dell’installazione
Una volta terminata l’installazione, l’icona rappresentata in figura verrà visualizzata nella taskbar.
INDICATORE SIGNIFICATO
Segnale ottimo (il numero di tacche indica la qualità del segnale)
Non connesso e/o errore di connessione
Dispositivo non rilevato o non presente
Per disabilitare l’utility Zero Configuration di Windows XP, fare riferimento all’appendice A.
Andando sull’icona, nella taskbar, e premendo il tasto destro del mouse verrà mostrato un menu contenente 4 scelte:
Apri utilità di configurazione
Informazioni
Nascondi
Abbandona
E’ possibile accedere direttamente all’utility anche lanciando
Realtek 11n USB Wireless LAN Utility (in
Programmi->Realtek 11n Wireless LAN Utility).
13
5. Utility di Configurazione
L’Utility di configurazione include 6 tabs: Generale, Profili, Reti Disponibili,
Stato, Statistiche e WPS. Inoltre nel Menu modalità è possibile selezionare se far funzionare NetFly UP WN come stazione (client wireless, modalità di default) o Punto D’accesso.
Tramite la stessa sarà possibile configurare tutti i parametri necessari al corretto funzionamento del prodotto, attivare funzionalità avanzate quali il supporto WPS e visualizzare informazioni sulle reti senza fili rilevate dal dispositivo.
Al suo avvio, in maniera automatica, verrà effettuata una scansione delle frequenze al fine di rilevare le reti wireless attive; il dispositivo si connetterà in maniera automatica all’Access Point con segnale migliore (non protetto da password) oppure all’Access Point evidenziato nel profilo di accesso (se preconfigurato). Nel caso in cui tutte le reti rilevate fossero protette e non vi sia alcun profilo di connessione preimpostato, il dispositivo rimarrà in uno stato di stand-by in attesa della selezione manuale della rete da parte dell’utente.
5.1 Reti Disponibili
In questa schermata è possibile visualizzare le reti disponibili e visualizzarne i parametri di base, come la potenza del segnale, la sicurezza adottata dalla rete, il canale di connessione e l’SSID.
Tramite la pressione del tasto Aggiorna, sarà possibile effettuare una nuova scansione delle frequenze al fine di rilevare tutte le reti wireless attive.
14
Dopo aver selezionato una rete dalla finestra SSID, la pressione del tasto Aggiungi
a Profilo permette la creazione di un nuovo profilo con i dati della rete selezionata
(nel caso in cui la rete sia protetta va digitata la password di rete). NetFly UP WN dovrebbe automaticamente connettersi utilizzando il profilo appena creato.
6. SUPPORTO OFFERTO
Per qualunque altro problema o dubbio sul funzionamento del prodotto, è possibile contattare il servizio di assistenza tecnica Atlantis tramite l’apertura di un ticket online sul portale http://www.atlantis-land.com/ita/supporto.php
.
Nel caso non fosse possibile l’accesso al portale di supporto, è altresì possibile richiedere assistenza telefonica al numero 02/ 78.62.64.37 (consultare il sito per verificare gli orari in cui il servizio viene erogato).
Per esporre eventuali richieste di supporto prevendita o richieste di contatto , si invita ad utilizzare gli indirizzi mail [email protected]
oppure [email protected]
.
Atlantis SpA
Via S. Antonio, 8/10
20020 Lainate (MI)
Fax: +39.02.78.62.64.39
Website: http://www.atlantis-land.com
Email: [email protected]
15
APPENDICE A: Connessione usando il Client di Windows
In Windows XP/Vista e 7 è incluso un client che permette la gestione di un adattatore wireless al pari delle Utility.
Windows 7/VISTA
Cliccare sull’icona di rete posizionata sulla System Tray (vedi immagine) e selezionare l’opzione Centro connessioni di rete e condivisione oppure cliccare su Start -> Pannello di Controllo -> Centro connessioni di rete e
condivisione.
Selezionare l’opzione Connessione a una rete dal menu di sinistra per visualizzare la lista di reti wireless disponibili.
Selezionare l’SSID della rete e premere sul pulsante Connetti per avviare la procedura di connessione.
Al termine della procedura di connessione, un messaggio confermerà l’avvenuta connessione del client USB all’AP.
Nel caso in cui non sia possibile visualizzare la lista di reti senza fili disponibili, si prega di verificare la corretta installazione dei driver del client USB.
16
Windows XP
Fare doppio click sull’icona di rete posizionata sulla System Tray (vedi immagine).
Selezionare l’SSID della rete e premere sul pulsante Connetti per avviare la procedura di connessione.
Al termine della procedura di connessione, un messaggio confermerà l’avvenuta connessione del client USB all’AP.
Di seguito è indicato come disabilitare il servizio Zero
Configuration di Windows XP, al fine di poter controllare il dispositivo tramite l’utility fornita a corredo:
Cliccare su Start e poi su Pannello di Controllo
Selezionare dal menu di sinistra la voce
Visualizzazione classica
Cliccare su Strumenti di amministrazione
Cliccare su Servizi
Selezionare il servizio Zero Configuration e cliccare su
Proprietà
Cliccare sul pulsante Arresta per terminare temporaneamente il servizio
Impostare il campo Tipo di Avvio su Disabilitato come da figura
17
Copyright Statement
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher.
Windows™ 98SE/2000/ME/XP/VISTA are trademarks of Microsoft ® Corp. Pentium is trademark of Intel. All copyright reserved.
The Atlantis logo is a registered trademark of Atlantis. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions.
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices like for example mobile phones. Wireless LAN devices are safe for use frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments for example:
On board of airplanes, or
In an explosive environment, or
In case the interference risk to other devices or services is perceived or identified as harmful
In case the policy regarding the use of Wireless LAN devices in specific organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial plants, private buildings etc.) is not clear, please ask for authorization to use these devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The
Manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, of the substitution or attachment.
Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.
CE Mark Warning
In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CE in which Countries where the product may be used freely:
18
Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland,
Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.
France: except the channel 10 through 13, law prohibits the use of other channels.
CE/EMC Restriction of Liability
The product described in this handbook was designed, produced and approved according to the EMC-regulations and is certified to be within EMC limitations.
If the product is used in an uncertified PC, the manufacturer undertakes no warranty in respect to the EMC limits. The described product in this handbook was constructed, produced and certified so that the measured values are within EMC limitations. In practice and under special circumstances, it may be possible, that the product may be outside of the given limits if it is used in a PC that is not produced under EMC certification. It is also possible in certain cases and under special circumstances, which the given EMC peak values will become out of tolerance. In these cases, the user himself is responsible for compliance with the
EMC limits.
Declaration of Conformity
This equipment has been tested and found to comply with Directive 1999/5/CE of the European Parliament and of the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. After assessment, the equipment has been found to comply with the following standards: EN 300.328 (radio), EN 301 489-1, EN 301 489-17
(electromagnetic compatibility) and EN 60950 (safety). This equipment may be used in all European Union contries and in all countries applying Directive 1999/5/CE, without restriction, with the exception of the following countries:
France (FR):
When this equipment is used outdoors, output power is limited to within the frequency bans listed on the chart. For more info, consult the website
www.art-telecom.fr.
Location
Indoor (no restriction)
Frequency Band (MHz)
2400-2483,5
Power (EIRP)
100mW(20dBm)
Outdoor 2400-2454
2454-2483,5
100mW(20dBm)
10mW(10dBm)
Italy(IT):
For more info, consult the website
www.comunicazioni.it
Luxembourg:
General authorization requie for network and service supply.
Norway (NO):
This subsection does not apply for geographical area within a radius of 20 km from the center of Ny Alesund.
19
Russia (CCP):
only for indoor application.
Declaration of Conformity
Hereby We declare that this product is in compliance with the essential requirements and other relevant provisions of Directive “Electromagnetic
Compatibility” and 1999/5/CE within CE Marking Requirememnt.
CE Declaration is available on the web site www.atlantis-land.com.
Important information for the correct recycle/treatment procedures of this equipment
The crossed-out wheeled bin symbol printed on the unit label or unit packaging indicates that this equipment must not be disposed of as unsorted municipal waste but it should be collected separately.
The waste of electric and electronic equipment must be treated separately, in order to ensure that hazardous materials contained inside the equipment are not buried thereby providing potential future problems for the environment and human health.
Moreover, it will be possible to reuse and recycle some parts of the waste of electric and electronic equipment, contributing to reduce the quantities of waste to be disposed of and the depletion of natural resources.
As user of this equipment, you are responsible to return this waste of electronic equipment to an authorised collection facility set up by your Municipality. More detailed information on your nearest collection centre can be obtained from your
Municipality or from other competent local entities.
If you are replacing the old equipment with a new equivalent product, the distributor must take-back the old equipment free of charge on a one-to one basis as long as the equipment is of equivalent type and fulfilled the same functions as the supplied equipment.
Your rôle in participating to the separate collection of waste of electric and electronic equipment is essential to ensure that environmental protection and human health objectives connected to a responsible treatment and recycling activities are achieved.
20
PS.: The above mentioned information are reported herewith in compliance with Directive
2002/96/CE, which requires a separate collection system and specific treatment and disposal procedures for the waste of electric and electronic equipments (WEEE). For further and more detailed information, we invite you to visit our website at www.atlantis-land.com
CE Logo with attention Mark ( ) aren’t fully compliant with minimum dimensions requirement to
European Directive due to limited sticker area.
WEEE BIN Logo ( ) isn’t fully compliant with minimum dimensions requirement to European Directive due to limited sticker area.
Atlantis suggest to vistit the web site www.atlantisland.com
in order to retrieve update manual, techsheet and driver.
Before starting, take a few minutes to read this manual.
Read all of instructions and save this manual for later reference.
21
Thank you for purchasing the Wireless USB Adapter that provides the easiest way to wireless networking. This User Manual contains detailed instructions in the operation of this product. Please keep this manual for future reference.
1. PRODUCT OVERVIEW
Thank you for purchasing the NetFly that provides the easiest way to wireless networking.
The NetFly (hereafter called the USB Adapter) is a high-efficiency wireless LAN USB
Adapter for wireless networking at home, in office or in public places. With the
Adapter, you can roam between conference room and office without being disconnected the LAN cables; in addition, sharing files and printers can be easy tasks.
The NetFly is available to Microsoft Windows operating systems (Windows ®
XP/VISTA/7, Linux and Mac OS X) and can be integrated into networking with either
Ad-hoc mode (computer-to-computer, without an Access Point), Infrastructure mode (computer-to-access point, an Access Point is required) or Access Point Mode.
The device offers quick and easy access among wired network and wireless network. The NetFly also supports WPA/WPA2 security, it increases the level of data protection and access control for Wireless LAN.
Last but not least WPS and WMM supports offers an high throughput for HD Video
Streaming and an easy way to make sure you wireless network.
Access Point Mode: PC with Wireless USB Adapter work as an Access Point. You can save money and make a little network using Your PC+Adapter as an Access
Point. This features is available only on selected SO (Vista/7).
1.1 System Requirements
Before installing the Adapter, your PC should meet the following:
PC with available USB V2.0/1.1*
Intel
® Pentium ®
Windows
®
III 600Mhz or compatible processor with 512 MB RAM
XP/Vista/7, Mac OS X and Linux operating system
Minimum 45 Mbytes free disk space for installing the driver and utilities
CD-Rom drive
The throughput is limited to 6Mbps if the wireless N Mini
USB adapter is plugged on an USB rev1.1 slot.
22
2. PACKAGE CONTENTS
Open the box of the NetFly Wireless Adapter and carefully unpack it. The box should contain the following items:
One NetFly Wireless USB Adapter
One MultiLanguage Quick Start Guide (English, French and Italian)
CD-Rom with Utility, Driver and Manual (English, French and Italian)
1 x Warranty Card and 1 x WEEE Card
If any item is found missing or damaged, please contact your local reseller for replacement.
3. SOFTWARE INSTALLATION
This section will lead you to install the driver and utility of the Wireless LAN
Adapter/Card.
3.1 Utility and Driver Installation
Insert the CD-ROM and the Auto-run program will appear (alternatively, open a file browser and double click on the start.htm file located in the CD directory).
Click on A02-UP-W300N icon to select NetFly USB Home Page.
Select Driver and the install wizard will begin installing the software. Follow the install wizard instructions to complete the installation.
Follow the Install Shield Wizard Instructions. Click Next to continue and finish it.
If you need to install the driver/utility manually, refer each
Windows OS to the following CD-Rom directory path: CD-
Rom:\A02-UP-W300N\Driver\< OS>
Plug the USB connector into the USB port on your computer (when required form the installation process).
The installation program will help you to setup the Wireless LAN utility.
3.2 Uninstallation
To uninstall the Wireless USB Adapter, go to the Control Panel of your system.
Open the Add/Remove Programs.
Select the Realtek Wireless LAN Driver & Utility in the Add/Remove
Programs and then click on the Remove.
Click on Remove ALL [or Overwrite the older version install without remove].
Then chose Yes, I want to restart my computer and click Finish.
23
Now You can remove the Adapter.
4. HARDWARE INSTALLATION
4.1 Hardware Installation for USB Adapter
Please plug the Wireless adapter (only when requested from OS) to a free USB slot on the PC.
4.2 Using the Configuration Utility
When the Wireless LAN Adapter was installed, you will see the icon on the Windows task bar. The user can configure the wireless settings using the Wireless Adapter
Configuration Utility. Double-click the utility icon that appears in the taskbar
INFORMATION ICON
Excellent
Not connected yet
Device not recognized
When You click on this icon in the Windows task bar You can see 4 different links:
Launch Config Utilities
Information
Hide
Exit
24
5. UTILITY
Double-click the Wireless LAN icon (or right-click and then select Launch Config
Utilities) to launch the Configuration Utility. With the Wireless Adapter utility, users can configure all the functions provided by the Wireless Monitor Utility. Double-click the utility icon that appears in the taskbar.
The Wireless Monitor Utility includes 6 tabs: General, Profile, Available
Network, Status, Statistics, WPS.
5.1 Available Network
Under the Network page, system will display the information of surrounding APs from last scan result. List information’s include SSID, Signal, Channel, Encryption algorithm, and Network type as picture shown.
Rescan: Issue an rescan command to wireless NIC to update information on surrounding wireless network.
Add to Profile: select an AP profile, click Add to Profile. It will bring up profile page and save user’s setting to a new profile.
If selected AP supports WEP or WPA/WPA2 You have to chose Authentication and Security tab in order to connect to the wireless network.
25
6. Support
For technical questions and support, please contact our help-desk by ticket on http://www.atlantis-land.com/ita/supporto.php
.
For generic informations, please send an e-mail to [email protected]
.
For presales informations, please send an e-mail to [email protected]
.
Atlantis SpA
Via S. Antonio, 8/10
20020 Lainate (MI)
Fax: +39.02.78.62.64.39
Website: http://www.atlantis-land.com
Email: [email protected]
26
APPENDIX A: Connect to a network using Windows client
MS Windows XP and Windows VISTA/7 can manage the USB client with its embedded utility for wireless networks; MAC OS X requires an external management utlity (provided on the CD) to set and manage the USB/ wireless client.
Windows 7
You can access the Connect to a network dialog box from many locations in
Windows 7, including the following:
By clicking Start, and then Control Panel (select Large/Small Icon) then click on Network and Sharing Center icon. Click on Connect to a Netwok.
From the Manage wireless connections (in the Wireless) select the wireless network SSID and click Connect .
If any wireless network is available, please check that the
USB/PCI wireless client is correctly installed on your PC.
Windows VISTA
You can access the Connect to a network dialog box from many locations in
Windows Vista, including the following:
By clicking Start, and then Connect to from the Windows Vista desktop
From the Manage wireless connections dialog box
From the Connect/Disconnect context menu option of a wireless network adapter in the Network Connections folder.
Select Wireless (on the combo box) in the filed Show, select the wireless network SSID and click Connect.
If any wireless network is available, please check that the
USB/PCI wireless client is correctly installed on your PC.
27
Windows XP
Double click on Wireless network icon on the system tray (see picture).
Select the wireless network SSID and click Connect.
If any wireless network is available, please check that the
USB/PCI wireless client is correctly installed on your PC.
In windows XP, it provides wireless configuration utility named windows zero configuration which provides basic configuration function for Wireless USB Adapter.
Currently, Realtek’s utility provides WPA-PSK supplicant’s functionality. If user required WPA function.
Please select WZC as main utility. To make it easier for user to select the correct utility. Realtek Utility will let user make the selection when it first ran after XP boot. Click the icon of will bring up the selection window and let user make the selection. When coexisting with WZC, Realtek Utility only provides monitoring function, such as link status, site surveying, statistic counters and advance feature status
28
Copyright
Copyright. 2002 est la propriété de cette société. Tout droits réservés. Sont interdites, la reproduction, la transmission, la transcription, la mémorisation dans un système de sauvegarde où la traduction dans une autre langue ou en langage informatique quels qu’ils soient, de la présente publication, sous quelque forme que ce soit ou quelque en soit le moyen, électronique, mécanique, magnétique, optique, chimique, manuel ou de tout autre genre, sans avoir obtenu préalablement l’autorisation de notre entreprise.
Non-responsabilité
La présente entreprise n’admet ni requêtes ni de garantie, explicites ou implicites, au sujet du contenu et de manière spécifique exclue la possibilité de garantie, communicabilité ou adaptabilité pour des finalités particulières. Le logiciel décrit dans le présent manuel est vendu ou concédé en licence “tel quel”. Si les programmes devaient présenter des problèmes après l’achat, l’acquéreur (et non pas la présente entreprise, son distributeur ou concessionnaire) est tenu de prendre en charge tous les coûts de manutention ainsi que les coûts dus à des dommages accidentels ou des conséquences dérivants d’un défaut du logiciel. La présente entreprise se réserve en outre le droit de revoir le contenu de cette publication et d’y apporter des modifications de temps en temps, sans obligation d’informer les utilisateurs de ces changements. Nous avons fait tout notre possible afin d’éviter la présence d’erreurs dans le texte, les images, les tableaux présents dans ce manuel et dans le Cd-Rom. Cependant, nous ne pouvons pas garantir l’absence totale d’erreurs et/ou d’omissions, nous vous remercions donc de nous les signaler et vous prions de nous en excuser. Enfin, nous ne pouvons être tenus pour responsables dans quelque perte que ce soit, dommage ou incompréhension à la suite directe ou indirecte de l’utilisation de notre manuel, le logiciel Cd-Rom et/ou disque dur.
Toutes les marques ou noms de produits mentionnés dans le présent manuel sont des marques commerciales et/ou brevetées par leurs propriétaires respectifs.
Marquage CE
Cet appareil peut causer des interférences radio, dans ce cas nous vous invitons à prendre les contre-mesures appropriées.
ATTENTION
Laisser au moins 30 cm de distance entre les antennes du dispositif et les utilisateurs.
Domaine de régulation
Chaque pays utilise des bandes de fréquences fixées par cet organisme, l’utilisateur final doit donc s’assurer du bon réglage de son AP sur un canal autorisé dans son pays.
29
Déclaration de Conformité
Cet appareil a été testé et est conforme à la Directive 1999/5/CE du Parlement européen et du Conseil concernant les équipements hertziens et les équipements de terminaux de télécommunications et la reconnaissance mutuelle de leur conformité.
Après évaluation du matériel, celui-ci est conforme aux normes suivantes : EN
300.328 (radio), EN 301 489-1, EN 301 489-17(compatibilité électromagnétique),
EN 60950-1 (sécurité) et EN50385. Ce matériel peut être utilisé dasn tous les pays de l’Union Européenne et dans tous les pays appliquant la Directive 1999/5/CE, sans limitations, à l’exception des pays suivants :
France :
En cas d’utilisation de ce matériel en extérieur, la puissance de sortie est limitée dans les plages de fréquences ci-dessous. Pour de plus amples informations, consultez le site de l’ART : www.art-telecom.fr
Site
Intérieur restriction)
Extérieur
(aucune
Plage
(MHz) de
2400-2483,5
2400-2454
2454-2483,5 fréquences Puissance (EIRP)
100mW(20dBm)
100mW(20dBm)
10mW(10dBm)
Italie :
Cet appareil est conforme à l’interface radio nationale et aux exigences de la table d’allocation des fréquences. L’utilisation de ce produit sans fil en dehors du cadre de la propriété de l’acquéreur nécessite une autorisation générale. Pour da plus amples informations, consultez le site www.comunicazioni.it
Luxembourg:
Il faut demander une autorisation pour l’installation de cet appareil.
Norvège (NO):
il est interdit d’utiliser cet appareil (20Km) proche de Ny Alesund
Russie (CCP):
Utiliser seulement à l’ Intérieur.
Déclaration de Conformité
Nous déclarons que cet appareil a été testé et est conforme à la Directive 99/5/CE du Parlement européen et du Conseil concernant les équipements hertziens et les
équipements de terminaux de télécommunications et la reconnaissance mutuelle de leur conformité. Il est possible de télécharger sur le site web (www.atlantisland.com) le document complet.
30
Information importante sur le recyclage et le traitement de cet
équipement
Le symbole représentant une poubelle sur roues barrée d'une croix, qui est imprimé sur l'étiquette ou l'emballage du produit, indique que cet équipement ne doit pas
être éliminé avec les déchets municipaux non triés mais doit faire l'objet d'une collecte sélective.
Les déchets d'équipements électriques et électroniques doivent être traités séparément afin d'éviter que les matières dangereuses contenues dans ces
équipements ne soient enterrées, ce qui pourrait occasionner des risques futurs pour l'environnement et la santé humaine. De plus, certains éléments des déchets d'équipements électriques et électroniques pourront être réutilisés et recyclés, ce qui contribuera à réduire les quantités de déchets à éliminer et à limiter l'épuisement des ressources naturelles.
En tant qu'utilisateur de cet équipement, vous êtes chargé de rapporter ce déchet d'équipement électronique à un centre de collecte autorisé par votre commune.
Vous pouvez obtenir, auprès de votre commune ou du groupement auquel elle appartient, de plus amples informations sur votre centre de collecte le plus proche.
Si vous achetez un équipement électrique ou électronique, le distributeur reprendra gratuitement l'équipement usagé que vous lui cèderez, dans la limite de la quantité et du type d'équipement vendu.
Votre participation à la collecte sélective des déchets d'équipements électriques et
électroniques est essentielle pour garantir que les objectifs de protection de l'environnement et de la santé humaine seront atteints.
PS: Les informations susmentionnées sont fournies ici en conformité avec la Directive 2002/96/CE et le Décret n° 2005-829 du 20 juillet 2005 relatif à la composition des équipements électriques et
électroniques et à l'élimination des déchets issus de ces équipements qui prévoient des procédures de collecte sélective et de traitement et d'élimination spécifiques aux déchets d'équipements électriques et électroniques. Pour de plus amples informations, nous vous invitonsà consulter notre site Internet à l'adresse suivante www.atlantis-land.com.
31
Félicitations pour avoir choisit ceproduit. Ce manuel a été rédigé pour une utilisation avancée de l’ Adaptateur Wireless USB, le terme Adaptateur sera utilisé dans ce manuel pour désigner cet appareil.
1. ADAPTATEUR WIRELESS
L’adaptateur Wireless NetFly USB est un adaptateur réseau Sans fil utilisable à la maison, au bureau ou dans des lieux publics. Ce produit gère la vitesse de transfert jusqu’à 300Mbps et peut auto-négocier les vitesses (de 54, 48, 36, 24, 18, 12, 9, 6
Mbps (IEEE 802.11g) ou 11, 5.5, 2, 1 Mbps (IEEE802.11b)) et d’envoyer sur le réseau sans fil aussi du video HD.
Avec ces fonctions intégrées, le produit vous donne la flexibilité nécessaire pour configurer le dispositif de manière à répondre aux besoins de votre environnement.
Les chipsets supportent le Wi-Fi Protected Access (WPA/WPA2) et le nouveau standard de sécurité IEEE802.11i en hardware, ainsi que le moteur d’encryptage haute vitesse sans dégradation des performances.
Les fonctions de sécurité avancée vous protègent des attaques de hacker.
Il est compatible avec les systèmes Windows fonctionne aussi en mode Ad-Hoc (d’un ordinateur à un autre) ou en mode
Infrastructure (d’un ordinateur à un point d’accès). L’adaptateur est aussi capable de fonctionner comme Point d’Accès.
® XP/Vista/7, Linux et MAC OS X et
1.2 Besoin système
Avant de commencer l’installation vérifiez si vous disposez des suivants requis:
PC desktop avec un slot USB V2.0/1.1*
Processeur Intel
® vive ou plus
Système Windows
Pentium ®
®
III 600Mhz ou compatible et 512 MO de mémoire
XP/Vista/7, MAC OS X ou Linux
45MB d’espace libre sur disque
Lecteur CD-Rom
Le produit (chipset 8192CU) n’a été testé que sur les kernel
2.6.18 ~ 2.6.38 et 3.0.8 et avec les distributions citées.
Atlantis ne garantit pas le fonctionnement sur d’autres distribution/kernel et ne pourra donc pas offrir de support.
32
2. Contenu de l’emballage
Une fois ouvert, vous devriez trouver les éléments suivants:
Adaptateur Wireless NetFly USB
Guide d'installation rapide (en Français, Anglais, et Italien)
CD-Rom avec manuels(en Français, Anglais, et Italien), pilotes et logiciels
Garantie et WEEE
Si vous constatez qu’un de ces composants manque, merci de vous adressez à votre revendeur.
3. INSTALLATION SOFTWARE
3.1 Installation Sous Windows
Allumez l’ordinateur. Introduisez le cd du logiciel dans le lecteur Cd-rom. Une nouvelle fenêtre apparaîtra, il faut choisir la page du produit (A02-UP-W300N) et enfin cliquer sur Pilotes pour exécuter l’installation du logiciel.
Suivez maintenant la procédure d’installation jusqu’à la fin (puis redémarrez l’ordinateur).
En cas de problemes avec le CD tapez
CDRom:\Start.htm. A ce stade il est possible de choisir la page du produit et lancer l’installation software.
A ce stade connecter l’adaptateur (voir la section 4) pour terminer l’installation.
3.2 Supprimer les drivers et l’utilitaire
Pour supprimer complètement pilotes et utilitaire, lancez le programme de désinstallation :
Cliquez sur Démarrer, choisissez Paramètres, puis cliquez sur Panneau de configuration.
Dans le Panneau de configuration, cliquez deux fois sur Ajout/Suppression
de programmes.
Dans la fenêtre Ajout/Suppression de programmes qui s'affiche, sélectionnez
Realtek Wireless LAN Driver & Utility.
Cliquez sur le bouton Modifier/Supprimer.
Vous serez alors invité à confirmer que vous souhaitez désinstaller l’adaptateur entièrement, cliquez sur Oui. Le programme d'installation supprimera les
33
pilotes. Cela peut prendre quelques minutes. Choisir Yes, I want to restart my computer now.
A ce stade il est possible de débrancher l’adaptateur de l’ordinateur.
4. INSTALLATION HARDWARE
4.1 Connecter l’adaptateur USB
Avant de connecter le produit au PC, il est imperatif d’installer le logiciel de configuration (voir la section 3 dans ce manuel).
4.2 Logiciel de configuration
Lors de l’installation logicielle, en plus des pilotes, une application permettant de configurer rapidement la connexion a été installée.
Double cliquez sur l’icône LAN Wireless ( ) ou clic droit puis sélectionnez
Launch Config Utility pour lancer l’utilitaire de configuration.
INDICATEUR SIGNIFICATION
L’adaptateur est relié à un réseau Sans-Fil et le signal est fort
(bon ou pas très bon selon le nombre de ligne)
L’adaptateur n'est pas relié à un réseau Sans-Fil mais la carte est correctement installée
L’adaptateur n'est pas relié à un réseau Sans-Fil et la carte peut ne pas être correctement installé
Clic droit sur ( ) puis sélectionnez entre :
Launch Config Utilities
Information
Hide
Exit
34
5. LOGICIEL DE CONFIGURATION POUR WINDOWS
Double cliquez sur l’icône LAN Wireless (ou clic droit puis sélectionnez Launch
Configuration Utility pour lancer l’utilitaire de configuration. Avec cet utilitaire, vous pouvez configurer toutes les fonctions de votre Adaptateur USB grâce aux 6 sous menus: General, Profile, Available Network, Status, Statistics, WPS.
5.1 Available Network
Pour voir, sélectionner et se connecter à l’un des réseaux Sans-Fils disponibles dans l’environnement de travail.
Cliquer sur ReScan :affiche les réseaux Sans-Fils visibles depuis l’Adaptateur.
Cliquez sur le bouton ReScan pour exécuter une nouvelle recherche des réseaux disponibles.
Add to Profile: pour créer et gérer vos profils (la maison, le bureau ou d’autres).
En double cliquant sur le profil créé, toutes les options spécifiées dans le profil comme le SSID, le canal et la clé WEP/WPA/WPA2 seront utilisées.
35
6. Support
Pour tous problèmes ou renseignements vous pouvez contacter le service d’assistence web d’Atlantis http://www.atlantis-land.com/ita/supporto.php.
Pour avoir des info vous pouvez contacter [email protected]
Atlantis SpA
Via S. Antonio, 8/10
20020 Lainate (MI)
Fax: +39.02.78.62.64.39
Website: http://www.atlantis-land.com
Email: [email protected]
36
APPENDICE A: Configuration de la connession sans fils en utilisant l’utilitaire de Windows
Windows 7
Cliquer sur Start, puis Panneau de Configuration (Grandes/Petites
icônes).
Cliquer 2 fois sur Centre Réseau et Partage, puis cliquer sur Gérer les
connexions Réseau.
Cliquer sur Connexion à un réseau.
Il y aura les réseaux Sans-Fils visibles depuis l’Adaptateur. Sélectionner le réseau desire puis cliquer sur le bouton Connexion pour établir une connexion.
Mettre le mot de passe réseau et cliquer sur Connexion. Cliquer enfin sur
Fermer pur terminer.
Windows VISTA
Cliquer sur Start, puis Panneau de Configuration (Affichage Classique).
Cliquer 2 fois sur Centre Réseau et Partage, puis cliquer sur Gérer les
connexions Réseau.
Cliquer 2 fois sur Connexion sans fil.
Il y aura les réseaux Sans-Fils visibles depuis l’Adaptateur. Sélectionner le réseau désiré puis cliquer sur le bouton Connexion pour établir une connexion.
Mettre ou le mot de passe réseau et cliquer sur Connexion.
Cliquer enfin sur Fermer pur terminer.
Windows XP
Cliquer sur le suivant icône (Connexion sans fils)
Il y aura les réseaux Sans-Fils visibles depuis l’Adaptateur. Sélectionner le réseau désiré puis cliquer sur le bouton Connexion pour établir une connexion.
Mettre ou le mot de passe réseau et cliquer sur Connexion.
Cliquer enfin sur Fermer pur terminer.
37
APPENDIX A: Country Channel List
For some European Country, it may have its own domain; users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of these countries.
Country Name Classification Range
0 CH1~11 Argentina, Bahrain, Brazil, Canada, Chile,
Croatia, Ecuador, Hong Kong, Malaysia,
Mexico, Panama , Peru, Philippines, Puerto
Rico, Romania, Saudi Arabia, Taiwan, United
States of America, Uruguay, Venezuela,
Yugoslavia
Australia, Austria, Belarus, Belgium,
Bolivia, Bulgaria, China, Colombia, Costa
Rica, Cyprus, Czech Republic, Denmark,
Egypt, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland,
India, Indonesia, Ireland, Israel, Italy,
Japan3, Jordan, Kuwait, Latvia, Lebanon,
Latvia, Lebanon, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Morocco,
Netherlands, New Zealand, Nigeria,
Norway, Paraguay, Poland, Portugal,
Russia, Singapore, Slovakia, Slovenia,
South Africa, South Korea, Spain,
Sweden, Switzerland, Thailand, Turkey,
United Arab Emirates, United Kingdom
France2
1
3
CH1~13
CH10~13
5
4
CH1~14
CH14~14
Japan
Japan2
38
APPENDIX B: Technical Specifications
Technical Specs
Product
Standards
Chipset
Interface
LED
WPS
Antenna
A02-UP-W300N(V2.0)
IEEE 802.11b/g/n
Realtek ® 8192CU
USB V2.0/V1.1
1 (Status)
Yes (HW button)
2 x Internal Striped Antennas
Advanced Features
Frequency Band
Radio Technology
AP Mode on Windows 7/Vista/XP
WMM
2412 ~ 2483 MHz
IEEE 802.11g/n: Orthogonal Frequency Division
Modulations Scheme
Multiplexing (OFDM)
IEEE 802.11b: Direct Sequence Spread Spectrum
(DSSS)
DBPSK/DQPSK/CCK/OFDM
Media Access Protocol CSMA/CA with ACK
Transmission Rate
Security
Transmitting Power
Receiver Sensitivity
Number of Operational
Channel
Range Coverage
Up to 300Mbps (auto-sense with auto fallback)
64/128-bit WEP, WPA-PSK, WPA2-PSK
802.11b/g/n: up to 16 ± 1 dBm
802.11b (1Mbps): -90dBm @8% PER
802.11b (6Mbps): -88dBm @8% PER
802.11b (11Mbps): -85dBm @8% PER
802.11g (54Mbps): -68dBm @10% PER
802.11n (150Mbps): -68dBm @10% PER
802.11n (300Mbps): -68dBm @10% PER
Europe (13)
Supported OS
Certifications
Dimensions(mm)
Indoor: up to 100 meters
Outdoor: up to 300 meters
MS Windows
MS Windows
MS Windows
®
®
®
VISTA (32/64-bit)
XP (32/64-bit)
7 (32/64-bit)
Linux Kernel 2.6.18 ~ 2.6.38 and 3.0.8
Mac OS X 10.4/10.5/10.6/10.7 (Intel)
Android 1.6~2.3 and 4.0
CE (Europe), WHQL Certification for driver
42 x 6 x 20 (without USB)
39
Temperature Range
Humidity
Continuos Current
Consumption
System Requirements
Operation: 0°C ~ 32°C
Storage: -10°C ~ 60°C
10% ~ 75% (non Condensing)
240mA (Tx), 370mA (Rx)
PC with available USB V2.0/1.1 slot
Intel
® Pentium ® III 600Mhz or compatible processor
with 512MB RAM
Windows
® XP/Vista/7, Mac OS X or Linux operating system
Minimum 45 Mbytes free disk space for installing the driver and utilities
CD-Rom drive
Package Contents
One NetFly USB Wireless Adapter
Quick Start Guide (English, French and Italian)
CD-Rom with Utility, Driver and Manual (English,
French and Italian)
1 x Warranty Card and 1 x WEEE Card
All rights registered
Microsoft and Windows are registered trademarks of Microsoft Corporation
Mac OS X is a trademark of Apple Inc.
All trade names and marks are registered trademarks of respective companies
Specifications are subjected to change without prior notice.
No liability for technical errors and/or omissions.
Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Environmental factors will adversely affect wireless signal range.
Compatibility with draft 802.11n devices from other manufacturers is not guaranteed.
CE Logo with attention Mark aren’t fully compliant with minimum dimensions requirement to European Directive due to limited sticker area.
Tutti i marchi riportati sono registrati ed appartengono ai rispettivi proprietari.
Microsoft e Windows sono marchi registrati di Microsoft Corporation.
Mac OS X è un trademark di Apple Inc.
Le specifiche riportate possono cambiare senza preavviso. Nessuna responsabilità per errori e/o omissioni.
Le condizioni ambientali e di utilizzo possono pesantemente influenzare il throughput atteso.
La compatibilità con dispositivi draft 802.11n di altri produttori non è garantita.
La marcatura CE con il simbolo di attention Mark poste sull’etichetta di prodotto potrebbero non rispettare le dimensioni minime stabilite dalla normativa a causa delle ridotte dimensioni di quest’ultima.
40
Atlantis SpA
Via S. Antonio 8/10
Lainate – MI – Italy [email protected]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project