Dynalink RTA1335 Brochure & Specs

ADSL

2

+

4

-Port Modem Router

4

Ethernet Ports with Security Firewall

RTA1335

FEATURES

>

>

>

>

>

>

>

>

>

Broadband Internet Access up to 24 Mbps

Supports ADSL, ADSL2 and ADSL2+

Simple Configuration

4 Ethernet Ports for Internet Sharing

Suitable for Home and Office Networks

Security Firewall & DMZ

VPN Pass-through

Port Forwarding, UPnP ™ and QoS

Freecall Helpline

NZ

0800 653 962

AUS

1800 063 962

12 month warranty www.dynalink.co.nz

www.dynalink.com.au

Get Connected.

4 Ethernet Ports with Security Firewall

Technical Specifications

(RTA1335)

ADSL Compliance

ADSL

• ANSI T1.413 Issue 2

• ITU G.992.1 Annex A (G.dmt)

• ITU G.992.2 Annex A (G.lite)

• ITU G.994.1 (G.hs)

• Support dying gasp

• Maximum Rate: 8 Mbps downstream and

1 Mbps upstream

ADSL2

• ITU G.992.3 Annex A (G.dmt)

• ITU G.992.4 Annex A (G.lite)

• Maximum Rate: 12 Mbps downstream and

1 Mbps upstream

ADSL2+

• ITU G.992.5 Annex A (G.dmt)

• Maximum Rate: 24 Mbps downstream and

1.2 Mbps upstream

ATM

• PPPoA (RFC 2364) and PPPoA Bridged mode

• PPPoE (RFC 2516) and PPPoE Bridged mode

• IPoA (RFC 2225)

• Bridged mode over AAL5 (RFC2684/1483)

• ATM Forum UNI 3.1 / 4.0 compliant PVCs

• UBR and CBR with traffic shaping

• OAM F4/F5 loopback cells

Bridging

• IEEE802.1d self-learning bridge

• Learning up to 4096 MAC addresses

• Transparent Bridging among Ethernet ports

Routing

• NAT / PAT allows multiple users to share Internet access

• UPnP IGD with NAT traversal capability

• Port Forwarding: users can setup multiple virtual servers (e.g., Web, FTP, Mail servers) on the local network.

• Static routing & dynamic routing RIPv1/v2

• DNS Relay, Dynamic DNS

• DHCP Client/Relay/Server

• IGMP Proxy

• Support IP/Bridge QoS for different traffic classes

• Support reservation of bandwidth to guarantee voice quality of VoIP applications.

Security

• PAP, CHAP, and MS-CHAP for PPP authentication

• Firewall based on incoming & outgoing filtering of IP address/Port number/Protocol type

• Ping blocking from WAN

• DMZ hosting

Supported Applications

• Application Level Gateways preset for Auth/Ident,

DNS, FTP, PPTP, IPSEC, POP3, SMTP, SSH, TELNET,

TFTP & WEB servers. Multiple Virtual Servers can be setup in local network.

• VPN passthrough

• NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, Real Player, CuSeeMe, online gaming.

Configuration and Management

• Embedded web configuration interface with password protection

• Remote management control

• Telnet session for local or remote management

• System events logging

• DSL connection diagnostics

• Firmware upgrade via web browser

• User setting backup & restore

www.dynalink.co.nz

www.dynalink.com.au

4 Ethernet Ports with Security Firewall

Technical Specifications

(RTA1335)

Hardware Interface

• One RJ-11 port for ADSL connection

• Four Ethernet ports for IEEE 802.3/802.3u 10/100

Base-T auto-sensing, auto cross-over

• One hidden reset button for restoring factory default settings

Chipset

• Broadcom BCM6338 single-chip ADSL2+ with integrated MIPS32 CPU, transceiver & Analog

Front End.

Regulatory Approval and Compliance

• ACA

• Telecom New Zealand PTC270

Power Requirement and Operation

Environment Requirement

• Power Adaptor: Output 12 VAC, 1A

• Power Consumption: less than 10 W

• Ambient Temperature: 0 to 40°C

• Relative Humidity: 20% to 90% (non-condensing)

Physical

• Front Panel: 7 LED Indicators

 

• Rear Panel

• Dimensions: 165mm(L) x 120mm(W) x 42mm(H)

• Weight: 300g

www.dynalink.co.nz

www.dynalink.com.au