Haier 21F3A, 21F3A-P, 21T3A, 21T3A-P Owner's Manual

COLOR TV RECEIVER

OWNER'S MANUAL

Please READ this manual carefully before operating the unit, and keep it for future reference.

The Owner`s Manual for the Follow Models:

21F3A, 21F3A-P, 21T3A, 21T3A-P

*Please read this manual carefully before using your television and keep this manual in a good place for future reference.

*To achieve the best performance of your television, read this User's Manual carefully and properly store it for future reference.

*Information of screen displays and figures in the User's Manual may vary due

to technical innovations or different models.

CONTENTS

Before Operation

Warning and cautions ............................................................................2

Installation ...............................................................................................3

Aerial connection...................................................................................3

Preparation of the remote control unit...................................................3

Function buttons and external sockets ................................................4

Front panel of the TV set........................................................................4

Rear panel of the TV set........................................................................4

Buttons on the remote control ..............................................................5

Basic operation

Switching on/off the TV set ....................................................................6

Watching TV program .............................................................................7

Watching TV program...........................................................................7

Program swap and auto scan functions................................................8

Searching channel ..................................................................................9

Full automatic search mode..................................................................9

Semi-automatic search.......................................................................10

Manual fine tune..................................................................................11

Program skip ......................................................................................12

Convenient picture and sound control functions .............................

13

Multiple picture modes ......................................................................13

Black stretch and noise reduce...........................................................14

Mute function......................................................................................15

Time functions ......................................................................................16

Clock setting and timer on/off functions...........................................16

Sleep timer and program preset ......................................................17

Setup function ....................................................................................18

Screen saver and child lock functions................................................18

AVL and calendar functions................................................................19

Fade ..................................................................................................20

Position exchange function .................................................................21

TELETEXT

Teletext...............................................................................................22

Others

Connection to the external audio and video equipment ..................24

Troubleshooting guide .........................................................................25

Specifications.

......................................................................................26

Warning and cautions

1. When you clean the TV set, please pull out the power plug from AC outlet.

4. Do not place the TV set near rain or moisture as it may cause an electric

Don't clean the cabinet and the screen with benzene, petrol and other chemicals.

shock, or the TV set to catch fire. The

TV set must only

be used in dry in door locations.

2. In order to prolong the using life of the TV set, please place it in a well ventilated location.

5. The back cover must only be removed by a registered electrical service person. Removing the back cover may result in electric shock, fire or damage to

the TV set.

3. Don't place the TV set in direct sunlight or near a heat source.

6. If the TV set is not going to be used for a long time, or there is a severe thunder & Lighting storm, it is recommended that the TV set be disconnected from the AC power outlet and the aerial plug removed.

Explanation on the display tube

Should the picture tube require cleaning, disconnect the power and use a dry soft cotton cloth. Do not use any cleaner or abrasive cloths.

Installation

Aerial connection

For an optimum high quality picture, it is strongly advised that the TV set connect to an external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite

(or cable) set top boxes, that the AV terminals are used to allow the stereo sound to be transferred.

300 twin-lead cable

Antenna adapter

(additional purchase)

75 coaxial cable

Preparation of the remote control unit

Battery installation

Take off the battery compartment cover. Place two AA batteries, make sure that battery polarity matches with the +/- mark inside the battery compartment.

Operation notes for the remote control unit

Under normal conditions, the life time of batteries is one year.

If you don't intend to use the unit for a long period or the electricity of the batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment.

Never place batteries in a fire.

Avoid dropping the remote control and/or getting it wet.

Function buttons and external sockets

Front panel of the TV set

Menu TV/AV switch

Volume position up/down

Signal receiver

Power switch Power indicator

Rear panel of the TV set

Antenna input

EXT

TV SCRAT Terminal

If you want to connect the TV set to the other audio/video equipment, please refer to P24.

Buttons on the remote control

MUTE SCAN SWAP

ZOOM CALL LIGHT TV/AV

P.STD

S.STD

CH+

VOLMENU VOL+

CH-

PICTURE SOUND

TIME FUNCTION

TUNE EXIT

Buttons and Descriptions

Program scan Button

Mute Button

Press to conceal the sound of programs.

No including)

Screen Display Button

Program number Button

Digital selector

Picture mode selection

Menu Select/ Adjust Button

Use this button to adjust the menu,

the volume and the channels

Teletext Button

Picture menu (Red)

Time menu (Yellow)

Tune menu (White)

Exit screen display/Teletext

Function menu (cyan)

Green Button

No including)

No including)

No including)

TV and AV Exchange Button

To exchanger between TV and

other available video inputs

Stand by Button

Swap function Button

Switching on/ off the TV set

In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained.



1 Please press the power switch to switch on AC

power supply and the power indicator will light.

2 If the indicator is lighting in red, press the button

on the remote control again.

Note

1 When you don't operate the TV set with a remote control, you can turn on it directly

on the TV set

(Child Lock must be turned off).

4

AUTO

BG

2 If you want to exchange to standby status, please press down the button on the remote control.

3 If you want to fully switch off the power supply for the TV set, please press the power switch button on the TV set.

Auto switch-off function

When the "Back" function is on, if an empty channel is selected or the TV programs are ended for the day, the power will be switched off 5 minutes later automatically. If the "OFF TIME" is on, it will be switched off according to the presetting time. The auto power off function does not work under video input or when the background is off.

(Note: If the "off timer" is less than 5 minutes, it will be switched off automatically to the preset

Time. )

Watching TV

You can watch TV program in a preset channel.

Watching TV program

How to select TV program

VOL-

CH+

MENU

CH-

VOL+

Select the desired program

1 Using "Program number" buttons

Directly enter the channel number with the numeric keypad on the remote control.

To select channel numbers from 10 ~ 99 press [-/--] button and enter the two digit channel number

To select channel numbers from 100 ~ 218 press [-/--] button twice and enter the 3 digit channel number

2 Using the CH+/- buttons

Press the CH+ button to select a channel number in number increasing direction.

Press the CH- button to select a channel number in number decreasing direction.

Select the desired sound

Press the VOL-/+ buttons on the remote or the front of the

TV set to adjust the volume level. The range is 0~99. When

the volume buttons are pressed the volume level is

displayed automatically on the TV screen.

TUNE

CH+

If the colour of a channel is abnormal

Usually this should be set in the

Auto position. However if the colours displayed on the screen are incorrect you can manually select the correct colour system.

When finish remember to turn it back to auto again so that other programs will still work correctly.

To select the colour change option press the TUNE button on the remote control.

TUNE

COLOUR AUTO

BAND VHFL

SKIP OFF

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH

VOLMENU VOL+

CH-

Use the CH+/- buttons to select Colour then the

VOL-/+ buttons to change between Auto, PAL, NTSC,

SECAM and NTSC443 . Press the EXIT button to save the setting.

Watching TV continued

Swap function enables quick swap to the last watched program.

Auto scan function enables automatic successive scanning of all the programs in memory with "OFF" skip status (each channel will last about 2 seconds).

Program swap and auto scan functions

SWAP

Program swap

1 Suppose the channel number

you used just now is 8 and the

channel number you are using

is 18 (as shown in the figure).

2 If you want to return to the last watched program channel

8, you can simply press the

SWAP button.

3 If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time.

18

AUTO

BG

8

AUTO

BG

18

AUTO

BG

SCAN

Auto program scan

1 If you want to select a desirable program, you may scan all the TV programs in memory. You can simply press the

SCAN button to do this. The program numbers will appear one after another from beginning to end (each channel number will last about 2 seconds).

2 If you want to stop the function during auto scanning, simply press the SCAN button again.

Searching channel

This TV set has three methods to set the channels, which are respectively full

In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel.

Full automatic mode

TUNE

CH+

VOLMENU VOL+

CH-

1 Press the TUNE menu button ,

till the TUNING menu shown on the right display on the screen.

TUNE

COLOUR AUTO

BAND VHFL

SKIP OFF

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH

2 Press the CH+/- buttons to select "AUTO SEARCH".

TUNE

COLOUR AUTO

BAND VHFL

SKIP OFF

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH

CALL

3 Press the VOL+ button to ensure automatic search function operates. All channels now playing program will be automatically preset in order .

After the search has finished , the first program number will display on the screen.

Display function

Press the CALL button, then the channel number and the systems will be displayed on the screen.

4

AUTO

BG

Searching channel

Continued

Semi-automatic search

Semi-automatic search

1 Press the CH+/- buttons or

PROGRAM NUMBER 0-9

buttons to choose desired

channels I.E. channel 1

TUNE


till the TUNING menu shown on the right display on the screen.

1

AUTO

BG

CH+

VOLMENU VOL+

CHselect " SEARCH".

TUNE

COLOUR AUTO

BAND VHFL

SKIP OFF

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH

EXIT

4 Press the VOL-/+ buttons to start searching.

The VOLdown button is used for lower side program search.

The VOL+ up button is used for higher side program search.

Repeat this step, till find the desired channel.

1

To turn off the on-screen menu

In general, after you press the MENU button, the menu item display (PICTURE, TIME , FUNCTION, TUNE, EXCHANGE,

ETC.) will automatically disappear within 15 seconds. If you

want to eliminate these contents immediately, please press

the EXIT button.

Searching channel

Continued

Manual fine tune

Manual fine tune

If the picture and/or sound are poor, try using the FINE

TUNE feature. Do not use this feature unless reception is poor.

CH+

VOLMENU VOL+


PROGRAM NUMBER 0-9

button to choose desired


CH-

1

AUTO

BG

TUNE


till the TUNING menu shown on

the right display on the screen.

select " FINE TUNE".

CH+

VOLMENU VOL+

CH-

TUNE

COLOUR AUTO

BAND VHFL

SKIP OFF

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH

4 Press the VOL-/+ buttons all through to carry out fine tune, till the best picture and sound are obtained.

1

FINE TUNE

152.25MHz

Searching channel

Continued

Program skip

VOL-

CH+

MENU VOL+

Program skip

The Program skip feature enables you to skip/hide programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control.


PROGRAM NUMBER 0-9

button to choose desired


1

AUTO

BG

CH-

TUNE

2 Press the TUNE menu button , till the TUNING menu shown on

the right display on the screen.

3 Press the CH+/- select "SKIP".

buttons to

TUNE

COLOUR AUTO

BAND VHFL

SKIP OFF

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH

CH+

VOLMENU VOL+

CH-

4 Press the VOL-/+ buttons to turn the SKIP function "ON".

5 Press the TUNE button to close

TUNE

COLOUR AUTO

BAND VHFL

SKIP ON

PROGRAM 0

SEARCH

FINE TUNE

AUTO SEARCH buttons to select channel, this channel will be skipped. However, you can still use the PROGRAM

NUMBER buttons to select the

skipped channel numbers.

If you want to recover the skipped channel

1 Use the PROGRAM NUMBER buttons to select the channel number to be recovered.

2 Repeat those steps just now.

3 Press the VOL-/+ buttons to turn the SKIP function "OFF".

Convenient picture and sound control functions

Multiple picture modes

P.STD

PICTURE

How to select picture modes

You can quickly select the desired picture mode from four preset modes and one customized mode.

STANDARD

Press the P.STD button to select the

RICH desired picture quality. Five kinds of picture modes (i.e., "STANDARD",

USER

"RICH", "USER","LISTEN",

LISTEN

"SOFT" ) can be selected in turn.

The 5 modes are

SOFT

Listen-This is a new feature that blacks out the TV

screen when listening to music only channels;

Soft-Designed for night time low light viewing;

Standard -Designed for rooms that have good all round

lighting;

Rich-Designed for rooms with high ambient lighting such

as daytime sport;

User-A spare setting that can be adjusted to personal

tastes.

How to customize your own picture status

1 Press the PICTURE menu button , till the PICTURE menu shown on the right display on the screen.

VOL-

CH+

MENU VOL+

2 Press the CH+/- buttons to select the item to adjusted, then press the VOL-/+ buttons to obtain the desired effect.

PICTURE

CONTRAST 48

BRIGHTNESS 32

COLOUR 48

SHARPNESS 40

*HUE 60

BLACK STRETCH OFF

CH-

I T E M Press VOLPress VOL+

Strong

CONTRAST Weak

BRIGHTNESS Dark

Bright

COLUOR Shallow Deep

SHARPNESS Soft Sharp

*Hue lean to purple lean to green

Note:

The "Hue" item only appears when the colour system is NTSC.


Continued

Black Stretch-(Automatically Increases the Contrast Rage)

Noise Reduce - (Picture Noise & Grain Reduction Circuit. Only use on poor reception.)

Black stretch and noise reduce

PICTURE

How to select BLACK STRETCH

CH+

1 Press the PICTURE menu button , till the PICTURE menu shown on the right display on the screen.

PICTURE

CONTRAST 48

BRIGHTNESS 32

COLOUR 48

SHARPNESS 40

*HUE 60

BLACK STRETCH OFF

VOLMENU VOL+ select "BLACK STRETCH".

CH-

3 Press the VOL-/+ buttons to turn the BLACK STRETCH function "ON" or "OFF".

PICTURE

CONTRAST 48

BRIGHTNESS 32

COLOUR 48

SHARPNESS 40

*HUE 60

BLACK STRETCH ON

FUNCTION

CH+

VOLMENU VOL+

CH-

How to select NOISE REDUCE

1 Press the FUNCTION menu button, till the FUNCTION menu shown on the right display on the screen.

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

2 Press the CH+/- buttons to select "NOISE REDUCE".

3 Press the VOL-/+ buttons to turn the NOISE REDUCE function "ON" or "OFF".

FUNCTION

BACKGROUND ON

NOISE REDUCE OFF

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR


Continued

Mute function

Sound mute

MUTE

1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off.

MUTE

2 If you want to recover the sound, press the MUTE button again or directly press the VOL-/+ buttons.

Time functions

Clock setting and timer on/off functions

Clock setting

TIME

The clock will only work if the TV set if left turned on or in standby. When the set is disconnect from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected.

CH+

VOLMENU VOL+

CH-

TIME

CH+

VOLMENU VOL+

CH-

1 Press the TIME menu button, and the TIME menu display on the screen.

2Press the CH +/- buttons select

"CLOCK", then press the VOL -

/+ buttons to adjust the time in hour position; press again the

CH+/- buttons to select the time in minute position, then press the VOL -/ +buttons to adjust the value of minutes .

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 1

OFF TIME --:--

SLEEP TIMER 0

REMIND TIME --:--

REMIND PROG 1

On/off timer

Using on/off timer function, the TV set can automatically turn on to a preset program or shut down in a preset time.

1 Press the TIME menu button to call up the TIME menu on the screen.

2 Press the CH+/- buttons to select "ON TIME", then press the VOL -/+ buttons to set the value in hour position; press again the CH+/- buttons to select the minute position and set the value of the minute.(take

18:00 as an example)

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 1

OFF TIME --:--

SLEEP TIMER 0

REMIND TIME --:--

REMIND PROG 1

3 Press the CH+/- buttons to select "ON PROG", then press the VOL-/+ or program direct number buttons to select your desired channel (take 8 as an example).

4 Repeat step 1-2 to set OFF

TIME.(take 23:00 as an example)

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 8

OFF TIME 23:00

SLEEP TIMER 0

REMIND TIME --:--

REMIND PROG 1

Time functions

Continued

Sleep timer and program preset

Sleep timer

The TV set have 18 sections

VOL-

TIME

CH+

MENU

CH-

VOL+

(each section has a time interval of 10 minutes) (See right chart):

0

10

20

170

180

1 Press the TIME menu button, and the TIME menu display on the screen.

2 Press the CH +/- buttons to select "SLEEP TIMER".

3 Press the VOL -/+ buttons to adjust the SLEEP TIMER level.

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 8

OFF TIME 23:00

SLEEP TIMER 120

REMIND TIME --:--

REMIND PROG 1

REMIND PROG function

Program remind timer, that displays an on-screen reminder prompt, when a program on a different channel is due to start.

VOL-

TIME

CH+

MENU

CH-

VOL+

1 Press the TIME menu button to call up the TIME menu on the screen.

2 Press the CH +/- buttons to select "REMIND TIME", then press the VOL -/+ buttons to set the value in hour position; press again the CH+/- buttons to select the minute position, and then set the value of the minute.(take 19:00 as an example)

3.Press the CH+/- buttons to select "REMIND PROG", then press the VOL -/+ buttons or the program direct number buttons to set the desired channel (take 18 as an example).

NOTE: For REMIND PROG to

operate CHILD LOCK must be

turned off.

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 8

OFF TIME 23:00

SLEEP TIMER 120

REMIND TIME 19:00

REMIND PROG 1

TIME

CLOCK 17:18

ON TIME 18:00

ON PROG 8

OFF TIME 23:00

SLEEP TIMER 120

REMIND TIME 19:00

REMIND PROG 18

Set up function

Screen saver and childlock functions

How to start screen saver function

When the BACKGROUD function is ON, the screen will turn automatically as shown "NO

SIGNAL" of moving ( black background).

NO SIGNAL

FUNCTION

CH+

VOLMENU VOL+

CH-

FUNCTION

CH+

VOLMENU VOL+

CH-

1 Press the FUNCTION menu

FUNCTION menu shown on the right display on the screen.

2 Press the CH+/- buttons to select "BACKGROUND" and press the VOL-/+ buttons to turn the

BACKGROUND function "ON" .

Child lock function

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

Enables the TV front control buttons to be locked.



2 Press the CH+/ buttons to select "CHILD LOCK" and press the VOL-/+ buttons to turn

CHILD LOCK function "ON" .

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

NOTE:

All the control panel buttons on the top of the TV are disabled

when CHILD LOCK is turned on. The power switch will still turn

the TV set off.

Set up function

Continued

AVL and calendar functions

AVL function

Automatic Volume Limit control reduces effect of large volume changes such as when the ads come on.

FUNCTION


FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

CH+ shown on the right display on the screen.

VOLMENU VOL+

CH-

2 Press the CH+/ button to select

"AVL" .

3 Press VOL-/+ button to turn the

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

FUNCTION

CH+

VOLMENU VOL+

CH-

Calendar function

Enables the TV sets internal calendar to be set.



2 Press the CH+/ button to select

"CALENDAR" , then press the

VOL-/+ buttons to the CALENDAR

display on the screen.

3 Press the CH+/- buttons to turn the YEAR/MONTH/DAY, press

VOL-/+ buttons to set or adjust the YEAR/MONTH/DAY.

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

Set up function

Continued

Fade

FUNCTION

Fade

The FADE control allows time for the picture tube to warm up and gently turned on, which can help prolong the life of the picture tube.

1 Press the FUNCTION menu button till the FUNCTION menu shown on the right display on the screen.

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

CH+

VOLMENU VOL+

CH-

2 Press the CH +/- buttons to select "FADE .

3 Press the VOL-/+ button to turn

FUNCTION

BACKGROUND ON

NOISE REDUCE ON

FADE ON

CHILD LOCK OFF

AVL ON

CALENDAR

Position exchange functions

Exchange

CH+

VOLMENU VOL+

CH-

Exchange

This feature enables TV programs that may be on a wrong TV channel number to be swapped/exchanged. This feature is very useful when Automatic Search Tuning has been used, to reallocate the found programs to the correct channel numbers.

1 Press the MENU button again

menu display on the screen.

PROGRAM NUMBER 0-9 buttons to set PROGRAM 1 TO 6.

EXCHANGE

PROGRAM 1 6

PROGRAM 2 2

EXCHANGE

CH+

3 Press the CH-/+ buttons to select " PROGRAM 2".

VOLMENU VOL+

CHthe PROGRAM NUMBER 0-9 buttons to set PROGRAM 2 TO 9.

EXCHANGE

PROGRAM 1 6

PROGRAM 2 9

EXCHANGE

CH+

VOLMENU VOL+

CH-

5 Press the CH+/- buttons to select "EXCHANGE".

6 Press the VOL-/+ buttons to set

"EXCHANGE".

EXCHANGE

PROGRAM 1 6

PROGRAM 2 9

EXCHANGE

Teletext

Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.).

Teletext

CH+

Teletext functions

You can press TELETEXT button into TELETEXT mode, press again to leave TELETEXT mode. All menu related functions are not available in TELETEXT mode. Only a few direct button control functions are available in TELETEXT mode, they are:

Volume adjustment, but without OSD display.

Mute function, but without OSD display.

Page up/down

Use the CH+/- buttons to browse next or previous page.

VOLMENU VOL+

CH-

Page number entering

To select a teletext page either directly enter the page number using the numeric key pad on the remote control or use the

CH+/- buttons, or the coloured Fast Text buttons.

Mix mode

While in Teletext mode press the button will show the teletext data superimposed on top of the TV picture. Press the button again to revert back to Full text.

Teletext

Continued

Teletext

Cancel mode

This feature allows the TV picture to be displayed while next page to be searched is entered and found. Only the top teletext line is displayed until the page is found. Press the button to hide the teletext information. Either press the button or the Text button to exit the cancel display mode.

Language change

Pressing the button will change the Teletext characters .

Hold

Pressing the button will stop the teletext page automatically updating. This feature is very useful where there are several teletext pages or data on the same page number.

Size

Pressing the button changes between full screen top half bottom half full screen. This feature is very useful as it magnifies the image making the characters easier to read.

Reveal

Pressing the button will reveal hidden text. This feature is used to reveal information such as answers to Teletext on-line interactive puzzles.

Subcode / Time

While in normal TV mode only, pressing the button will display the teletext time in the top right hand corner for a few seconds

Switch teletext on/off

Press the button on the remote control to turn teletext

On/Off.

Subtitle

Pressing the button will get the teletext decoder to automatically search for the subtitle page. In NZ the subtitle is usually page 801.

Fast text coloured buttons

Fast text automatically displays the four most commonly used pages that the broadcaster thinks that you may want to choose next. Press the same coloured button on the remote control as the coloured link at the bottom of the teletext page to go directly to that page.

Connecting the TV set to the other video and audio equipment

Connecting to the other video and audio equipment

EXT

To TV EXT To TV EXT

To video/audio input

To outside input

DVD, VCD and other reproducing equipment Stereo

Troubleshooting guide

To assist in location possible faults use help guide below .

BREAKDOWN PHENOMENON

PICTURE SOUND

CHECKING

Picture with snow

Double or Triple Image

Noise

Normal

The aerial direction and connection

This is called ghosting which can be minimized with an outside aerial, and good quality cable and terminations. Altering the aerial direction can also minimize this effect.

Electrical interference which can be caused by cars, motorbikes etc, Fluorescent lamps and dirty insulators on overhead power cables.

Disturb

Noise

Normal

No Picture

No colour

Scramble

Colour Spot

Volume Sound mute.

No sound

No sound

Ensure that the power supply is connected to the TV set and turned on. Also ensure that the TV set is not in "Listen Mode" or that the brightness and contrast are not turned down.

Normal volume

Adjust colour control

Adjust channel again

Normal or Weak Volume

Normal volume

Colour Purity fault which can be caused by moving the

TV set, placing magnets near the TV screen or turning on/off house hold appliances such as vacuum cleaners near the TV set. Turn the TV off with the mains power switch for 15 minutes. When the power is turn on again the TV set will automatically degauss the picture. In server cases leave the TV set turned off over night.

Note:

1.If the fault can not be repaired using the above guide consult with your local authorized service center.

2.The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire.

3. The cabinet may produce the occasional "snapping sound" This is normal and caused by the materials in the cabinet expanding with room temperature changes.

Specifications

Colour system

Sound system

Picture tube

PAL

BG

21"colour picture tube(the viewable dimension is 51cm)

Sound output power

Power requirements

Power consumption

Dimension

2W not distortional

~ 220-230V 50/60Hz

70W

576 Width x395 Depth x458 Height mm

Accessories

Remote control X1

Owner's manual X1

Battery(AA) X2

The design and specifications may be changed without notice.

01

0090505957A

No results