advertisement
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
5 4 5 4
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
5 4 5 4
7
| Digital Video Security Systems
DC
ELC
8. Package
Camera
1EA
SCREW
3EA
L-WRENCH
1EA
Power Cable
1EA
8
| Digital Video Security Systems
EN
Vimar SpA: Viale Vicenza, 14
36063 Marostica VI - Italy
Tel. +39 0424 488 600 - Fax (Italia) 0424 488 188
Fax (Export) 0424 488 709 www.vimar.com
49400737A0 00 14 10
VIMAR - Marostica - Italy
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001 ISO14001
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than those specified.
This installation should be made by a qualified service person and should conform to all local codes.
100
EN
210
Non installare la telecamera in condizioni di temperatura estreme.
Non installare o utilizzare la telecamera in ambienti con valori di umidità elevati.
Non installare la telecamera in condizioni di luminosità instabile.
5 4 5 4
Utilizzare la telecamera solo in condizioni di temperatura compresa fra -10°C e +50°C.
Prestare particolare attenzione a garantire un'adeguata ventilazione quando la telecamera opera a temperature elevate.
Non installare o utilizzare la telecamera in ambienti con valori di umidità elevati.
Non toccare l'obiettivo anteriore della telecamera.
Non rivolgere la telecamera verso fonti luminose ad alta intensità.
Sbalzi di illuminazione o sfarfallii possono portare la telecamera a funzionare in modo improprio.
Non lasciar cadere la telecamera e non sottoporla a urti.
Questa è una delle parti più importanti della telecamera. Fare attenzione a non lasciare impronte sulla copertura dell'obiettivo.
Evitare di esporre la telecamera alla pioggia e non versare liquidi su di essa.
Ciò potrebbe causare un malfunzionamento.
Non esporre la telecamera a radiazioni.
5
| Digital Video Security Systems
Se si bagna, asciugare immediatamente.
I liquidi possono contenere minerali che corrodono i componenti elettronici.
Se esposto a radioattività, il CCD smette di funzionare.
I danni alla scocca potrebbero compromettere l'indice di resistenza alle intemperie.
NOTA
* Se la telecamera è esposta a faretti o a oggetti che riflettono la luce in modo intenso, l'immagine può presentare striature o effetto blooming.
* Verificare che l'alimentazione soddisfi le normali specifiche prima di collegare la telecamera.
I
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION
ISO14001
ISO14001
Manuale per il collegamento e l’uso
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Installation and operation manual
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
3. Dimensioni
LENS
SHUTTER SPEED
WHITE BAL
BLC
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
ELC
ATW
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
LOW
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
5 4
5 4
ISO14001
5 4
5 4
46623.034D
Telecamera Mini Dome per interni IR 1,3M pixel, obiettivo 3,6mm, OSD Menu
Indoor 1.3M pixel Mini Dome IR Camera, 3.6mm Lens, OSD Menu
4. Caratteristiche principali
DC
ELC
• Sensore 1/3" 1.3Mega SONY Exmor
• Alta risoluzione: 1000 TVL
• Chip DSP di 5a generazione
• Illuminazione minima: 0 Lux
• Oscuramento aree private (16 zone)
• WDR reale
• Senza rumore e immagini fantasma con DNR
• Massima risoluzione: Immagine nitida e vivida nell'oscurità totale
• Funzione giorno/notte reale con ICR
• Alimentazione a 12 Vcc
7
| Digital Video Security Systems
2. Istruzioni di sicurezza
Precauzioni per l'uso
• La telecamera deve essere installata solo da personale qualificato
• Non contiene parti riparabili dall'utente
• Non smontare la telecamera se non per effettuare le regolazioni iniziali
• Utilizzare alimentazione regolata a 24 volt c.a. o 12 volt c.c approvata UL
• Utilizzare un cavo di alimentazione a basso voltaggio adatto a evitare incendi o scosse elettriche
• Assicurarsi che l'area di installazione supporti il peso della telecamera
Maneggiare la telecamera con cura
• Non utilizzare detergenti forti o abrasivi per pulire la telecamera
• Non esporre la telecamera alla luce diretta del sole
• Non installare la telecamera in luoghi ad alto tasso di umidità
• Non installare vicino a dispositivi di raffreddamento o riscaldamento
• Non esporre la telecamera alla pioggia o all'umidità
I
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
5. Specifiche
MODEL
Tipo di sensore
Risoluzione
Pixel effettivi
Pixel totali
Sistema scansione
Rapporto S/N
Frame rate
Uscita video
Illuminazione minima
Obiettivo
Velocità otturatore elettronico
OSD
BLC
HSBLC
Ampia gamma dinamica (WDR)
WDR digitale
Funzione giorno/notte
White Balance (bilanciamento del bianco)
Funzione SMART-IR
Funzione SENSE-UP
Rilevazione di movimento
Tracciamento del movimento (Zoom rapido)
Uscita OSD per Anti spostamento
Uscita OSD per Anti oscuramento
3D DNR
Anti-appannamento
Luminosità
AGC
Mascheramento privacy
Specchio / FLIP verticale
Nitidezza
Compensazione luce circostante (LSC)
RS-485 (protocollo)
Angolo di visione
USCITA CVBS
Comunicazione
Consumo energetico
Alimentazione
Lens (obiettivo)
Dimensione (L x A x P)
Peso
46623.034D
5 4 5 4
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Scansione progressiva
Più di 50dB
MAX 50P/60P
CVBS: 1.0Vp-p/75 Ohm
0 Lux (IR LED ON)
DC/MANUALE
O
O
AUTO / Manuale (1/60Sec ~ 1/60000Sec) / SFARFALLIO
Built-in
ON (Basso, Medio, Alto) / OFF
ON (Basso, Medio, Alto) / OFF
Colore / BW / Auto / EXT
AUTO / AUTO ext / AWC -> SET / MANUAL
0~20 (Livello regolabile), Default : 0 x64, Default : x8
ON / OFF (4 zone programmabili)
ON / OFF
ON / OFF
ON / OFF
OFF / BASSO / MEDIO / ALTO
ON (AUTO / MANUAL) / OFF
0~20 (Livello regolabile), Default : 10
0~20 (Livello regolabile), Default : 20
ON / OFF (16 zone programmabili)
ON / OFF
0~15 (Livello regolabile), Default : 7
ON/OFF
Regolabile
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selezionabile
Controllo coassiale
IR LED ON:300mA Max
12Vdc
Obiettivo fuoco fisso (3,6mm)
54mm(L) * 50mm(A) * 54mm(P)
300g
8
|
I
Digital Video Security Systems
7
| Digital Video Security Systems
DC
ELC
DC
ELC
DC
ELC
DC
ELC
7
| Digital Video Security Systems
7 | Digital Video Security Systems
8
|
7
| Digital Video Security Systems
Digital Video Security Systems
8 | Digital Video Security Systems
8
| Digital Video Security Systems
8
| Digital Video Security Systems
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
ISO14001
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
5 4
5 4
5 4
5 4
6. Collegamento dei cavi
VIDEO
(giallo)
BNC
Power (+) Sengale video
POWER
(rosso)
Power (-)
(DC 12V)
Cavo per comando OSD incluso
GND Video
POWER VIDEO
True Day & Night
(True Day/Night with ICR)
7.
Collegamento della telecamera
DC
ELC
DC
ELC
OSD
LED IR
Sensor CDS
7
| Digital Video Security Systems
7
| Digital Video Security Systems
I
Base
Involucro
8. Imballo
Telecamera
1EA
Cavo di alimentazione
1EA
Vite
3EA
8
| Digital Video Security Systems
8
| Digital Video Security Systems
I
Chiave a L
1EA
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001 ISO14001
Il simbolo della freccia a forma di fulmine inserito in un triangolo equilatero serve ad avvertire l'utente della presenza di tensione elettrica pericolosa non isolata, all'interno del contenitore del prodotto, che può essere di intensità tale da costituire pericolo di scossa elettrica per le persone.
Il simbolo del triangolo con il punto esclamativo serve ad avvisare l'utente della presenza di importanti istruzioni di funzionamento e manutenzione (assistenza) nella documentazione che accompagna il dispositivo.
INFORMAZIONI: Questo apparecchio è stato testato ed è risultato conforme ai limiti stabiliti per i dispositivi digitali di Classe A, ai sensi della Parte 15 degli standard FCC e
CE.
Questi limiti sono progettati per offrire protezione adeguata contro le interferenze dannose quando l'apparecchiatura è utilizzata in un ambiente commerciale.
L'attrezzatura genera, utilizza e può irradiare frequenze radio e, se non installata e utilizzata secondo il manuale di istruzioni, può provocare interferenze dannose alle comunicazioni radio.
L'utilizzo di questa attrezzatura in aree residenziali può causare interferenze dannose che l'utente potrebbe dover correggere a proprie spese.
AVVERTENZE: I cambiamenti o le modifiche non espressamente approvati dal costruttore potrebbero invalidare il diritto dell'utente a utilizzare l'apparecchiatura.
ATTENZIONE: Per evitare il rischio di scosse elettriche e incendi:
NON utilizzare fonti di alimentazione diverse da quelle specificate.
L'installazione deve essere effettuata da un tecnico qualificato e deve essere conforme a tutte le normative locali.
100
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
1. Precautions
210
Do not install the camera in extreme temperature conditions.
Do not install or use the camera in an environment where the humidity is high.
Do not install the camera under unstable lighting conditions.
5 4 5 4
Only use the camera under conditions where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures.
Do not install or use the camera in an environment where the humidity is high.
Do not touch the front lens of the camera.
Never keep the camera pointed directly at strong light.
Severe lighting change or flicker can cause the camera to work improperly.
Do not drop the camera or subject it to physical shocks.
This is one of the most important parts of the camera. Be careful not to leave fingerprints on the lens cover.
Do not expose the camera to rain or spill liquids on it.
5 |
Digital Video Security Systems
If it gets wet, wipe dry immediately.
Liquids can contain minerals that corrode the electronic components.
It can cause malfunctions to occur.
Do not expose the camera to radioactivity.
If exposed to radioactivity the CCD will fail.
Housing damage can compromise weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.
* please check that the power satisfies the normal specification before connecting the camera.
I EN
LENS
SHUTTER SPEED
WHITE BAL
BLC
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
ELC
ATW
HIGH
OFF
LOW
OFF
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2. Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
• This camera should be installed by qualified personnel only
• There are no user serviceable parts inside
• Do not disassemble this camera other than to make initial adjustments
• Use a UL approved regulated 24 volt AC or 12 volt DC power supply
• Use appropriate low voltage power cable to prevent fire or electrical shock
• Please insure that your installation area can support the weight of the camera
Please handle this camera carefully
• Do not use a strong or abrasive detergent when cleaning the camera
• Do not expose the camera to direct sun
• Do not install camera in places where humidity is high
• Do not install near cooling or heating device
• Do not expose camera to rain or moisture
EN
5. Specifications
MODEL
Image Sensor
Resolution
Effective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Poewr Consumption
Power Supply
Lens
Dimension
Weight
46623.034D
1/3" 1.3Mega SONY Exmor Sensor (Imx138)
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(IR LED ON)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color/BW/Auto/EXT
AUTO/AUTO ext/AWC->SET/MANUAL
0~20(Level Adjustable), Default : 0 x64, Default : x8
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 20
ON / OFF (Programmable 16 Zones)
ON/OFF
0~15 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
IR LED ON:300mA Max
12Vdc
Fixed Focus Lens (3.6mm)
54mm(W) * 50mm(H) * 54mm(D)
300g
EN
*3.6mm Fixed Board Lens / ø5 IR LED Built-in 7pcs
3. Dimension
5 4 5 4
5 4 5 4
4. Key Features
• 1/3" 1.3Mega SONY Exmor Sensor • High Resolution : 1000TVL
• 5th Generation DSP Chip
• Min. Illumination : 0Lux
• Privacy Masking (16 Zones)
• Real WDR
• No Noise, Ghosting Effect with DNR
• Highest Resolution:Vivid Sharp Picture in completely darkness
• True Day/Night with ICR
• Power DC 12V
EN
6. Cable Connection
VIDEO
(yellow)
BNC
Power (+) Video Signal
POWER
(red)
(DC 12V)
OSD Control cable included
Power (-) Video GND
POWER VIDEO
DC
DC
ELC
DC
ELC
True Day & Night
(True Day/Night with ICR)
7. Camera Connection
OSD
IR LED
CDS Sensor
7
| Digital Video Security Systems
EN
Base
Case
DC
ELC
8
| Digital Video Security Systems
7
| Digital Video Security Systems
8
| Digital Video Security Systems
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project