advertisement
T373.730 Shown
151mm
(5-7/8)
ENFIELD
CENTRAL THERMOSTAT
LESS VOLUME CONTROL
MODEL NUMBER:
TRIM KITS:
T373.732 Central Thermostat Trim Kit
Less volume control. With Cross handle. L ESS Valve.
T373.730 Central Thermostat Trim Kit
Less volume control. With Lever handle. L ESS Valve.
ROUGH VALVES:
R510 Rough Valve Body only
1/2" NPT inlets/outlets. L ESS Trim.
R530 Rough Valve Body only
3/4" NPT inlets/outlets. L ESS Trim.
NOTE:
• Requires separate on/off volume control.
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
193mm
(7-5/8)
242mm
(9-5/8)
R510
1/2 NPT
R530
3/4 NPT
R510
1/2 NPT
R530
3/4 NPT
34mm
(1-3/8)
86mm
(3-3/8)
25mm
(1)
150mm
(5-7/8)
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains one handle, which sets the desired temperature. The temperature is maintained by a wax element moving a shuttle valve between hot and cold. Includes Hot Limit
Safety Stop. Maximum temperature limit is 112°F.
Escutcheon plate is stamped brass. Available with 1/2" or 3/4" NPT inlets and outlets. The valve has a high flow rate, ideal for mutiple outlet installations.
48mm to 68mm
(2 to 2-5/8)
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability
& long life.
Wax Thermostatic Unit: Permits shuttle valve to move between the hot and cold seats to maintain the pre-selected constant water temperature.
Back to Back Capable: Hot and cold can be reversed.
Spring-Loaded Check Valves: When the hot and cold water enters the fitting, both supplies pass through the spring-loaded check valves to prevent cross flow of hot and cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. Maximum water temperature limit may be reduced to 104 or 109 degrees Fahrenheit.
SUGGESTED SPECIFICATION:
Central Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature 1/2" or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T373.73X.____ (Trim Kit) and R510 or R530 (Rough Valve).
F25
© 2008 AS America Inc.
CODES AND STANDARDS
These products meet or exceed the following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B125
FLOW RATE*
25
20
15
10
5
0
20 40 60 80 100
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
3/4"
1/2"
Product
Number
T373.732
*
T373.730
*
Description
Central Thermostat Trim Kit. Less volume control. Cross Handle.
Central Thermostat Trim Kit. Less volume control. Lever Handle.
Polished
Chrome
002
Finish Options
Polished
Nickel
PVD
Blackened
Bronze
008 068
PVD
Satin
Nickel
295
Product
Number
R510
R530
Description
Rough Valve Body less trim. 1/2" inlets/outlets.
Rough Valve Body less trim. 3/4" inlets/outlets.
* NOTE: • When used as a Bath/Shower a separate diverter valve is required (such as 1660.430 or 1660.440).
Requires twin ell twin ell - (Model #8888.120 - must be ordered separately) for use with diverter spouts.
• Requires separate on/off volume control.
** ROUGH & TRIM MUST BE ORDERED SEPARATELY.
Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.
T373.730 Shown
151mm
(5-7/8)
MODEL NUMBER:
TRIM KITS:
T373.732 Central Thermostat Trim Kit
Less volume control. With Cross handle. L ESS Valve.
T373.730 Central Thermostat Trim Kit
Less volume control. With Lever handle. L ESS Valve.
ROUGH VALVES:
R510 Rough Valve Body only
1/2" NPT inlets/outlets. L ESS Trim.
R530 Rough Valve Body only
3/4" NPT inlets/outlets. L ESS Trim.
NOTE:
• Requires separate on/off volume control.
• When used as a Bath/Shower:
EITHER
- a separate diverter valve (such as R420 or R430)
OR
- a diverter tub spout (requires twin ell - Model #8888.120)
IS REQUIRED
193mm
(7-5/8)
242mm
(9-5/8)
R510
1/2 NPT
R530
3/4 NPT
R510
1/2 NPT
R530
3/4 NPT
34mm
(1-3/8)
86mm
(3-3/8)
25mm
(1)
150mm
(5-7/8)
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains one handle, which sets the desired temperature. The temperature is maintained by a wax element moving a shuttle valve between hot and cold. Includes Hot Limit
Safety Stop. Maximum temperature limit is 112°F.
Escutcheon plate is stamped brass. Available with 1/2" or 3/4" NPT inlets and outlets. The valve has a high flow rate, ideal for mutiple outlet installations.
48mm to 68mm
(2 to 2-5/8)
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability
& long life.
Wax Thermostatic Unit: Permits shuttle valve to move between the hot and cold seats to maintain the pre-selected constant water temperature.
Back to Back Capable: Hot and cold can be reversed.
Spring-Loaded Check Valves: When the hot and cold water enters the fitting, both supplies pass through the spring-loaded check valves to prevent cross flow of hot and cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. Maximum water temperature limit may be reduced to 104 or 109 degrees Fahrenheit.
SUGGESTED SPECIFICATION:
Central Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also feature 1/2" or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T373.73X.____ (Trim Kit) and R510 or R530 (Rough Valve).
CODES AND STANDARDS
These products meet or exceed the following codes and standards:
ASSE 1016
ASME A112.18.1
CSA B125
ENFIELD
CENTRAL THERMOSTAT
LESS VOLUME CONTROL
FLOW RATE*
25
20
15
10
5
0
20 40 60 80 100
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
3/4"
1/2"
Product
Number
T373.732
*
T373.730
*
Description
Central Thermostat Trim Kit. Less volume control. Cross Handle.
Central Thermostat Trim Kit. Less volume control. Lever Handle.
Polished
Chrome
002
Finish Options
Polished
Nickel
PVD
Blackened
Bronze
008 068
PVD
Satin
Nickel
295
Product
Number
R510
R530
Description
Rough Valve Body less trim. 1/2" inlets/outlets.
Rough Valve Body less trim. 3/4" inlets/outlets.
* NOTE: • When used as a Bath/Shower a separate diverter valve is required (such as 1660.430 or 1660.440).
Requires twin ell twin ell - (Model #8888.120 - must be ordered separately) for use with diverter spouts.
• Requires separate on/off volume control.
** ROUGH & TRIM MUST BE ORDERED SEPARATELY.
Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.
F26
© 2008 AS America Inc.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement