Axxera ARC600 Quick Start Manual

Product Wiring Diagram

CAUTION

When installing the rear camera, the hole size should necessarily beat10mm.

Please use when connecting to a Navigation or monitor which does not have an automatic rear view switching function

RED

(Reverse Signal +12V)

FUSE BOX

Bl..PCK(GND)

POWER CABLE EXTENSION CABLE

Please use the enclosed tape to tighten them. not to be loose.

Product feature

. 1 /3. 7 inch image sensor

Using 1/3.7 inch image sensor displays vivid image day and night.

• Waterproof design

It blocks the inflow of moisture and external materials from complete waterproof design.

• Zinc die casting case

Iron die casting case with great durability is applied for quality and design of the product.

• Simple design

It was designed with unique design of vehicle in elegant design and simple installation.

· View angle of 163°

It secures broad sight when it is converted into rear view screen by providing lens angle of 163°.

· Parking guide line

R:>ssible to safe parking along parking guide line.

Main components

Main components

Camera power cable extension cable fixed tape

1 8 manual hole guide sticker double -side tape nut

Guidelings before installation

• The power of this product is designed with the specification of DC 12V vehicle.

• Do not disassembe the product as it is water-proof.

• Do not wipe or scratch the camera lens with sharp object as it may cause the lurriness of the image. (Repair is unavailable)

• Do not voluntarily cut off the wire or connect with other wires. It may cause severe damage to electric devices of vehicle. (Repair is unavailable)

• Camera should be installed accurately.

Installation of this camera may cause collision with pedestrians or minor collisions with other vehicle so it should not be.

• Camera lens should be wiped regularly with soft cloth and others in order to remove external materials such as sand. snow, and others on the surface of camera.

• The angle of is subject the vibration of vehicle. Install it so that it not be shaken.

• Please Install it so that each connecter contact moisture.