advertisement
1 DATECS
User Manual
Linea Pro 5
1 DATECS Linea Pro 5
`
CONTENTS
User manual
Legal Notice ...........................................................................................................................................
4
Compatibility
Overview
Linea Pro 5 Models
................................................................................................................................................
Technical Data
.................................................................................................................................
........................................................................................................................................
4
6
7
8
Box Contents
Getting Started .....................................................................................................................................
Buttons overview
Back side view
9
10
..................................................................................................................................
Front side view
.................................................................................................................................
11
11
12
Attaching device
Operation modes
Charging Battery
..................................................................................................................................
...................................................................................................................................
Battery status level of the Linea Pro 5 .............................................................................................
13
15
16
17
Charging Modes
Barcode Scanning
Card Reading
................................................................................................................................
Using the 1D barcode scanner:
17
18
Using the 2D barcode scanner:
.......................................................................................................
.......................................................................................................................................
18
19
20
Contactless Card Reading ....................................................................................................................
21
2
1 DATECS Linea Pro 5
`
Legal Notice
User manual
“Made for iPod” “Made for iPhone” and “Made for iPad” mean that an electronic accesory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible fort he operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accesory with iPod, iPhone or iPad may affect wireless performance.
Compatibility
Made for iPod touch (5 th generation) iPad, iPhone, iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.
3
1 DATECS Linea Pro 5
`
User manual
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Use shielded cables to connect this device to computers.
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.
4
1 DATECS Linea Pro 5
`
Linea Pro 5 Models
User manual
Model
Linea Pro 5 MSR
Linea Pro 5 EMSR
Linea Pro 5 MSR 1D/2D
Linea Pro 5 EMSR 1/D2D
Linea Pro 5 MSR 1D/2D/BT
Linea Pro 5 EMSR 1D/2D/BT
Linea Pro 5 MSR
1D/2D/ BT/RFID
Linea Pro 5 EMSR
1D/2D/ BT/RFID
Description
Linea Pro 5 with 3-Track mag-stripe reader
Linea Pro 5 with Secure Encrypting MSR
Module
Linea Pro 5 with 3-Track mag-stripe reader and
1D/2D barcode scanner
Linea Pro 5 with with Secure Encrypting MSR
Module and 2D barcode reader
Linea Pro 5 with 3-Track mag-stripe reader,
1D/2D and Bluetooth®
Linea Pro 5 with Secure Encrypting MSR
Module, 1D/2D and Bluetooth®
Linea Pro 5 with 3-Track mag-stripe reader,
1D/2D/Bluetooth® and RFID reader
Linea Pro 5 with Secure Encrypting MSR
Module, 1D/2D/Bluetooth® and RFID reader
Table 1
5
1 DATECS Linea Pro 5
`
Overview
User manual
Linea Pro 5 allows mobile workers to convert their iPod 5 handset into a powerful point-of-sale solution. The Linea Pro 5 includes optional 1D or 2D barcode scanner, 3-tracks magnetic stripe reader, RFID reader and a rechargeable battery extender in a very compact and durable protective case.
Features:
Battery: Rechargeable Li-ion Battery - 1300 mAh, charging via USB or DATECS
Power Station.
Magnetic Card Reader – 3-Track Head:
Swipe Speed: Minimum of 1.97 in/sec
MTBF: 1 million swipes
Bidirectional reading capabilities
Barcode Scanner: Single / Multi-scan mode
1D - MTBF: 30K hours (Laser Diode & Mirror Unit 10K hours)
2D – EM3070 Image sensor 752x480 CMOS
2D – MDI-3100 Image sensor 752x480, Scan rate: Up to 60fps
2D – EA-30 Image sensor 752x480, Scan Rate: up to 60fps/120fps in 1D mode (Aimer: 650nm laser, Class 2)
Indicators:
Visual: 4 LEDs for device battery status
Audio: Electromagnetic Buzzer
I/O Connectors:
9-pin lightning connector
10-pin female Mini-B USB connector for charging and synchronization
6
1 DATECS Linea Pro 5
`
Technical Data
User manual
Power supply Internal voltage 3.3V & 5V
Compatibility iPod5
MCU 32-bit ARM™ Cortex™ - M3 based Microcontroller
Communication
Interface
USB Interface – between Linea Pro 5 and iPod5
USB Synchronization between Apple iPod5 ® & PC
Power Consumption Deep sleep ~20uA
Bluetooth
Bluetooth 2.0 Class 2 distance - Up to 10m
Serial port profile
BAR code
Supported Barcode
Type
RFID
MDL - 1000 - Laser Scan Engine 1D Barcode
MDI - 3100 - High Speed 2D CMOS Imager
EM3070 – High Performance 2D Imager scanner
EA-30 - High Performance 2D Imager scanner
UCC/EAN 128, EAN 13, EAN 8, UPC A, UPC E, UPC E1,
Code 11, Code 39, Code 93, Code 128, GS1, Matrix 2 to 5,
Code 11,2 of 5 industrial, 2 of 5 interleaved, Codebar,
MSI/Plessey, UK/Plessey, IATA,ISBN, ISMN, ISSN, S-code,
Telepen, RSS 14, RSS Limited, RSS- Expanded, PDF417, microPDF417, Data Matrix, QR code, Aztec code, Maxi code, Micro QR code
MIFARE MINI
MIFARE CLASSIC-1K, MIFARE CLASSIC-4K
MIFARE ULTRALIGHT, ULTRALIGHT-C
ISO 14443, ISO 15693
MIFARE PLUS 2K/4K
DESFire card, FeLiCa
MSR
Secure Encrypting
MSR
Module
3-track bidirectional reading capabilities
Type: ISO 7816-1/2/3 compatible & RAW mode
PCI PTS 3.x SRED compliant
DUKPT and Fixed Key Management
3DES-112, AES-128, AES-256 encryption algorithms
LEDs Four LEDs for battery status
Buttons Scan and Status Buttons
Audio Electromagnetic Buzzer
Battery
Rechargeable Li-ion Battery 3,7V 1300mAh, charging from
USB port or DATECS Power station
Weight, g 120 / with EA-30/
Dimensions, mm (L x
W x H) iPod5 with 1D scanner 142 x 69 x 22 iPod5 with 2D scanner 142 x 69 x 27
Environment
- Operating temperature 0°C to +40°C
- Operating humidity 35 to 85% RH
- Storage temperature -5°C to +40°C
- Storage humidity 10 to 90% RH
Standard USB A to mini B CABLE(0.9m)
Cables
USB DOWNLOAD CABLE (option)
* Specifications subject to change without notice.
Table 2
7
1 DATECS Linea Pro 5
`
Box Contents
Your Linea Pro 5 comes with the following items listed below:
Item
1
Part Number
Linea Pro 5
Descriptions
Linea Pro 5 / Scanner
2 USB A to mini USB B USB Sync cable
3 Linea Pro 5 User Manual User's manual
*Bulk Shipments may ship without cables and manuals in each box.
Table 3
User manual
Image
8
1 DATECS Linea Pro 5
`
Getting Started
User manual
The Linea Pro 5 allows you to scan barcode and capture Magnetic Strip information onto your iPod 5. Before using your Linea Pro 5 the battery should be properly charged. The following Quick Start guide will help to get your Linea Pro 5 ready for use.
Quick Start:
Step
1
2
3
Attach device to Linea
Pro 5
What to do
Fully charge your Linea
Pro 5 as recommended.
Install Software.
Purpose
Where to find more information
The battery pack should be fully charged before use to ensure long battery life.
Charging Battery, Page
13.
Barcode Scanning
& Card Reading requires software to be installed onto your iPod 5
Connecting your Linea Pro
5 and iPod 5
Please contact your distributor
Attaching device, Page
11.
Table 4
9
1 DATECS Linea Pro 5
`
Buttons overview
Front side view
Back Cover
User manual
Volume
Controls
10
1 DATECS Linea Pro 5
`
10-pin mini USB connector
Aperture for
Headset
Jack
Charging Lamellas
Back side view
User manual
Openings for Speaker and Bottom microphone
Status LEDs and
Status Button
Magnetic stripe reader
Scan engine
Scan Button
11
On/Off
1 DATECS Linea Pro 5
`
Linea Pro 5 versions for iPod5
Linea Pro 5
(aperture for Ring/Silent switch)
User manual
Linea Pro 5 for iPod
5
Attaching device
Step 1 – Remove the “back cover”
12
1 DATECS Linea Pro 5
`
User manual
Step 2 – Slide the iPod 5 or into Linea Pro 5. (Please, before attaching the device, check the compatibility version of the Linea Pro 5 - for iPod 5 (page 10), and then connect it with the correct Linea Pro 5).
Slide in until iPod 5 is connected to the lightning 9-pin connector.
Step 3 – Return the “back cover”
13
1 DATECS Linea Pro 5
`
Operation modes
Active mode -
Sleep mode -
User manual
While iPod 5 is inserted.
While the Linea Pro 5 application is active.
While iPod 5 is removed (after ~10sec).
When iPod 5 On/Off button is pressed (after ~10sec).
When iPod 5 “Auto-Lock” function is activated (after ~10sec).
Charging Battery
The Linea Pro 5 uses a 1300mAh Lithium-Ion rechargeable battery pack.
Before first use, the battery pack should be charged for at least (4) hours. Linea Pro
5 can be charged via USB port or DATECS Power Station. When the Linea Pro 5 charging is started, automatically starts the charging of the inserted inside the cradle iPod 5.
WARNING: To prevent electrical damage to the Linea Pro 5 and/or battery pack, please use approved USB to Mini USB cables only!
Linea Pro 5 has 4 battery status LEDs. The battery level status can be checked by pressing the status button or can be viewed from the application.
14
1 DATECS Linea Pro 5
`
User manual
15
1 DATECS Linea Pro 5
`
Battery status level of the Linea Pro 5
User manual
LED1 is lighting – battery level is under or equal to
3,6V.
LED1 and LED2 are lighting – battery level is between 3,6V and
3,7V.
LED1, LED2 and LED3 are lighting – battery level is between 3,7V and 3,9V.
LED1, LED2, LED3 and
LED4 are lighting – battery level is between
3,9V and 4,2V.
While the device is charged, depending on the battery level, one of the LEDs is blinking.
When the device is fully charged all 4 LEDs are continuously lighting.
Charging Modes
- Enable pass-through sync (enable sync between iPod 5 and PC with charge)
16
1 DATECS Linea Pro 5
`
User manual
Barcode Scanning
Using the 1D barcode scanner:
The Linea Pro 5 1D uses a scan engine that supports one-dimensional (1D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size.
Scanning 1D Barcodes:
To scan a 1D barcode, first activate the scanner. Then position the scanning head as close as possible to the barcode label so that the scan line crosses both ends of the barcode as shown on the figure below.
Slowly pull back the unit, while increasing the distance between the barcode and scanning head, until the barcode has been read by the scanner.
Scan Button
Reading distance is depend of the barcode size
Linea Pro 5 supports different types of scan:
Single Scan
Multi Scan
17
1 DATECS Linea Pro 5
`
Using the 2D barcode scanner:
User manual
The Linea Pro 5 2D uses a scan engines that supports one-dimensional (1D) and two-dimensional (2D) barcode symbols. The effective reading distance of the barcode reader varies depending on the barcode size.
Scanning 2D Barcodes:
To scan a 2D barcode fist activate the scanner. Then position the scanning head to the center of the barcode by aiming with the red laser beam and the illumination box is over the outer edges of the barcode, as shown in the figure below.
Slowly pull back the unit, while increasing the distance between the barcode and the scanning head, until the barcode has been read by the scanner.
Scan Button
Reading distance is depend of the barcode size
Linea Pro 5 supports different types of scan:
Single Scan
Multi Scan
18
1 DATECS Linea Pro 5
`
Card Reading
User manual
Reading Magnetic Stripes:
The Linea Pro 5 has a built-in magnetic card reader. The card reader incorporates a (3) track magnetic read head, requiring a single swipe to read field data from all three tracks.
The magnetic reading head faces up, towards the top of the bottom cover of the cradle. When swiping the card into the reader, the magnetic stripe must be facing down, as shown in the figure below. Keep the edge of the card flat on the inner base of the reader to ensure that the magnetic stripe passes over the reading head evenly
Swipe direction
Swipe direction
19
1 DATECS Linea Pro 5
`
Contactless Card Reading
User manual
In order to use the RFID card reading function, special software must be used.
Please contact your distributor in order to get the latest demo application and SDK.
Place the card on the shown spot and press the reading RFID card button on the application. The data will be sent from the Linea Tab RFID reader to the Apple
Device.
Place for RFID cards
20
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement