American Time AllSync Plus Steel Surface Mount & Double Sided Analog Clock Specifications

AllSync Plus

®

Surface and Double Dial

Metal Case

FEATURES

• 3 Year Warranty

• UL/cUL Listed - 12" & 15" round, surface only

• Microprocessor controlled movement

• 15 minutes of backup power (no batteries required)

• Accuracy to within ±1 second of a master clock

• Reduced power consumption

• Attractive modern design

• Heavy-duty construction

• Metal case

• Diagonostic LED

DESCRIPTION

The American Time ® AllSync Plus clocks are provided in round or square metal cases with glass (10" and 12" round) or plexiglass

(12" square and 15") crystals and bold, black numerals and minute markers on a non-yellowing white dial. Stylish hour and minute hands are aluminum with a black finish and a red sweep second hand.

The American Time AllSync Plus clock is designed to work with multiple master clocks and correction signals. This unit is programmed to identify the signal it receives from the master and operate as that style of clock. Changing clock operation from one style to another is as easy as unplugging the clock from one system and plugging it into another. If needed, changing the placement of two small jumpers on the circuit board can change the voltage required to run this clock from 120vac to 24vac or

24vac to 120vac. This clock provides 15 minutes of backup run power without the use of batteries. If a power outage should last longer than 15 minutes, the clock will synchronize to the master clock at the hourly and 12 hour correction cycles.

Correction Signals

Works on:

• Hourly correction: 7-9 seconds starting at the 57th minute and 54th second. 12 hour correction: 13-18 seconds starting at

5:57:54 (am and pm).

• Hourly correction: 24-28.5 seconds starting at the 0 minute and 0 second. 12 hour correction: 24-32 minutes starting at

6:00:00 (am and pm).

• * Hourly correction: 54-56 seconds starting at the 58th minute and 5th second. 12 hour correction: 10 pulses of 94-96 seconds starting at 5:05:00 (am and pm) and repeating every 2 minutes.

• Hourly correction: 24-26 seconds starting at 0 minute and 0 second. 12 hour correction: 25 pulses of 24-26 seconds starting at 6:00:00 (am and pm) and repeating every 60 seconds.

• Hourly correction: 63-67 seconds starting at the 58th minute and 0 second. 12 hour correction: 14 pulses of 63-67 seconds starting at 5:06:00 (am and pm) and repeating every 2 minutes.

• * Hourly correction: 54-56 seconds starting at the 58th minute and 5th second. 12 hour correction: 12 pulses of 63-67 seconds starting at 5:05:00 (am and pm) repeating every 90 seconds.

*Note:

When switching between these correction protocols, you must use a different correction protocol to complete the transition. The

AllSync Plus clock needs to distinguish between hourly corrections before it can change correction protocols internally.

COMPLIANCE

• FCC Part 15 Class B

• ICES-003

140 3rd St. S, PO Box 707, Dassel, MN 55325

800-328-8996 • american-time.com

Page 1 of 2

January 11, 2021

PS03058 Rev I

SPECIFICATIONS

• 120vac 50/60 Hz or 24vac 50/60 Hz

• Current draw: Single dial:

24vac, 1 watt, .043 amps

120vac, 3 watts, .028 amps

Double dial:

24vac, 2 watts, .086 amps

Maximum operating voltage: 24vac setting = 32vac

120vac setting = 140vac

Minimum operating voltage: 24vac setting = 18vac

120vac setting = 105vac

BEZEL

FINISHES

GENERAL

120vac, 6 watts, .056 amps

Types of secondary clocks compatible with AllSync Plus:

Cincinnati

Dukane

Edwards

Faraday

WS*, *D-8, *D-10, *D-12 Series

24SS* Series, 240* Series

Honeywell

Lathem

National Time

Simplex ® & IBM

*010 & *012 Series

2315*, 2316*, 2335*, 2336*, 2370*, 2372*, 2380*, 2382*, 2311*, 2320*, 2331*, 2314*,

1310 through 1431 Series and 2420* through 2431* Series

ST402A* Series

Type SS* Series

*EX-HH and *EX-LL Series

77* Series, 82* Series, 2310 – 92* Series, 6310 – 92* Series

*Indicates more numbers before or after.

ORDERING INFORMATION

Part #

U44BHBA404

Description

U44BHAA404 10" Rd Surface 120vac

10" Rd Surface 24vac

U54BHAA404 12" Rd Surface 120vac

U54BHBA404 12" Rd Surface 24vac

U57BGAA404 12" Sq Surface 120vac

U57BGBA404 12" Sq Surface 24vac

U64BGAA404 15" Rd Surface 120vac

U64BGBA404 15" Rd Surface 24vac

Part # Description

U53BHAA204 12" Rd Double dial wall 120vac

U53BHBA204 12" Rd Double dial wall 24vac

U52BHAA204 12" Rd Double dial ceiling 120vac

U52BHBA204 12" Rd Double dial ceiling 24vac

U51BGAA204 12" Sq Double dial wall 120vac

U51BGBA204 12" Sq Double dial wall 24vac

U50BGAA204 12" Sq Double dial ceiling 120vac

U50BGBA204 12" Sq Double dial ceiling 24vac

Notes: Replace the BH (Black Sand) in the part # with GH for a Steel Gray case. 10" & all square available in Black Sand only.

For a plexiglass crystal, replace the BH or GH

U63BGAA204 15" Rd Double dial wall 120vac

U63BGBA204 15" Rd Double dial wall 24vac

U62BGAA204 15" Rd Double dial ceiling 120vac

U62BGBA204 15" Rd Double dial ceiling 24vac in the part number with BG or GG. Square and 15" clocks available with plexiglass crystal only.

Black Sand=BH

Matte finish

Steel Gray=GH

12" round only

Smooth satin finish

Steel flush mount

Steel surface mount

Wall mount round steel double dial

Ceiling mount round steel double dial

A

B

A

B

OUTSIDE DIMENSIONS

Round

“A” Dimensions:

11 1 ⁄

4

" for 10" clocks

13 1 ⁄

4

" for 12" clocks

16 1 ⁄

4

" for 15" clocks

“B” Dimensions:

2 1 ⁄

4

" for 10", 12" & 15" clocks

B

A

B

Flush mount steel square

Surface mount steel square

Wall mount steel square double dial mechanical

A

Ceiling mount steel square double dial mechanical

A A

Square (12" only)

“A” Dimensions:

12 5 ⁄

8

"

“B” Dimensions:

3 1 ⁄

4

"

A B

B B

B

Double dial mounting requires a 4" square electrical box in the wall or ceiling.

A

At American Time, we continually strive to improve our products to meet our customers’ needs and to provide the best possible value. The above specifications are believed to be correct, are subject to change without notice and may otherwise vary from the above. Please call if you need verification of any specifications or the suitability of a particular product for a particular application.

Steel square double dial profile

© American Time

140 3rd St. S, PO Box 707, Dassel, MN 55325

800-328-8996 • american-time.com

Page 2 of 2

January 11, 2021

PS03058 Rev I

C