Unlevel Surfaces Radio Frequency
Interference
High Humidity
Air Currents
Unlevel Surfaces
Air Currents
Thanks for purchasing the CLASSIC Digital Mini Scale! This
User Guide is designed to get you up and running quickly with your scale. Scales are precision instruments and require proper care and skill to get the best results. If you have questions or need support, visit us at http://www.
truweigh.com/support or scan the QR Code on the back of this manual using your smartphone.
What’s In The Box
Vibration
Two AAA
Batteries
CLASSIC Digital
Mini Scale
Vibration Extreme Temps
Key Descriptions
ZERO/TARE - Zero’s the scale. Also subtracts the weight of an empty container (see Tare Function).
MODE - Changes the weighing unit.
ON/OFF - Turns the scale ON or OFF.
Unlevel Surfaces Radio Frequency
Interference
High Humidity
Air Currents
Unlevel Surfaces
Vibration
Radio Frequency
Interference
Extreme Temps
High Humidity
Air Currents Vibration
Weighing Your First Item
Extreme Temps
1. Press the ON/OFF key to turn the scale on.
2. Place the item on the center of the weighing platform.
3. Take your reading from the display. You can press the MODE key to convert between weighing units.
4. The scale’s auto-off function will turn the scale off after 3 minutes of inactivity or you can press the
ON/OFF key to turn the scale off.
Things To Avoid
Unlevel Surfaces Radio Frequency
Interference
Radio Frequency
Interference
High Humidity
Air Currents Vibration Extreme Temps
Unlevel Surfaces Radio Frequency
Interference
High Humidity
Air Currents Vibration Extreme Temps
Unlevel Surfaces Radio Frequency
Interference
Radio Frequency
Interference
High Humidity
Air Currents Vibration
Unlevel Surfaces
Air Currents
Air Currents
Air Currents
Interference
Radio Frequency
Interference
Vibration
High Humidity
Extreme Temps
Unlevel Surfaces
High Humidity
Vibration
Vibration Extreme Temps
Extreme Temps
Radio Frequency
Interference
High Humidity
Air Currents
Tare Function
The Tare function allows you to subtract the weight of a container so that the display only shows the weight of the
Extreme Temps Vibration contents.
Unlevel Surfaces Radio Frequency
Interference
High Humidity
Air Currents Vibration Extreme Temps
Place an empty tray or container on the platform.
Press the ZERO/TARE key to subtract the container’s weight.
Add items to the container to see their weight on the display.
NOTE: The weight of the container will subtract from the available capacity and will leave a negative value on the display once the weight is removed. Press
ZERO/TARE again to return the display to zero.
Accuracy
Your scale comes calibrated from the factory and most users wont need to calibrate their scale for a long time.
You should check your scale’s accuracy periodically using calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with weights printed on the side are not suitable for checking accuracy as these values are approximate and don’t include the container weight (Net Weight).
Unlevel Surfaces Radio Frequency
Interference
High Humidity
Air Currents Vibration Extreme Temps
Unlevel Surfaces
Air Currents
Calibration
Calibration adjustment is permanent and should only be performed using accurate calibration weights that match the requirements for your scale (see the chart on back). Do not use coins or other household items to calibrate.
Vibration
Unlevel Surfaces Radio Frequency
Interference
High Humidity
1. Prepare the required weight for your scale. (see chart on back)
2. Find a flat and level surface to perform calibration and let the scale adjust to room temperature.
Radio Frequency
Interference
3. Press ON/OFF to turn the scale on and wait for the
Air Currents scale to stabilize.
Extreme Temps
4. Press and hold the MODE key until the display shows ‘CAL’.
5. Make sure nothing is on the platform then press
MODE to confirm the zero point.
6. The display will then flash the required calibration weight.
7. Place the required calibration weight on the center of the platform.
8. The display will show
‘PASS’ then return to normal weighing mode. You may now turn the scale off or continue weighing.
Specifications
Max Capacity
Readability
Weighing
Units
Dimensions
Calibration
Weight
Power
Warranty
CL-100-01
100 g / 3.527 oz /
3.215 ozt/ 64.30 dwt /
500.00 ct / 1543.2 gn
0.01 g / 0.001 oz /
0.001 ozt / 0.01 dwt /
0.05 ct / 0.2 gn
CL-1000-1
1000 g / 35.27 oz /
32.15 ozt/ 643 dwt /
5000 ct / 15432 gn
0.1 g / 0.01 oz / 0.01 ozt
/ 0.1 dwt / 0.5 ct / 2 gn g, oz, ozt, dwt, ct, gn
Overall: 5.0 in x 3.0 in x 0.75 in
Platform: 2.5 in x 2.9 in
Display: 0.4 in x 1.2 in
100g
2 x AAA Batteries
10 Year Limited Warranty
500g
For more information, including weighing tips and support, scan this code with your smartphone
Or visit us online at truweigh.com/support/