Nuvico CD-STD21N Specifications

Add to My manuals
1 Pages

advertisement

Nuvico CD-STD21N Specifications | Manualzz

NTSC

Corporate Headquarters | [email protected] • T 866.523.1700 • 201.541.1605

International Operations | [email protected]

Customer Service | [email protected]

Technical Support | [email protected]

EasyView

2 Series

SIE II, High Resolution 580 TV Lines, Indoor Dome Camera

CD-ST21N • CD-STD21N NTSC

TECHNICAL SPECIFICATIONS

Technical Specifications

Video Format

Image Sensor

Horizontal Resolution

Day/Night Functionality

Lens Type (DC Auto Iris)

Angle of View

Sync System

Effective Pixels

Scanning System

Electronic Shutter

Main Video Output

Service Monitor Output

Minimum Illumination

S/N Ratio

Camera Control & Setup

General Information

Operating Temperature

Operating Humidity

Power Consumption

Input Voltage

CD-ST21N

NTSC

1/3” CCD

580 TV Lines

No

Vari-focal 2.8mm-10mm

131.6°(W) ~ 35.6°(T)

Internal

768(H) x 494(V)

525 Lines. 2:1 Interlaced

1/60 ~ 1/100,000 sec.

1.0 Vp-p Composite, 75 ohm

1.0 Vp-p Composite, 75 ohm

0.1 Lux (DSS Off), 0.001 Lux (On)

More than 50dB (AGC Off)

OSD Menu

CD-ST21N

23ºF ~ 113ºF (-5ºC ~ +45ºC)

Within 90% RH

4W / 500mA

12VDC/24VAC Dual Voltage

CD-STD21N

Yes w/ ICR

0.01 Lux (DSS Off), 0.0001 Lux (On)

CD-STD21N

*specifications are subject to change without any prior notice.

KEY FEATURES

• 1/3” CCD Sensor

• 580 TV Lines

• 2.8~10mm, DC Auto Iris Lens

• Day/Night Functionality with ICR (CD-STD21N Only)

• EZ-Coax™: NUVICO Up-the-Coax Telemetry Control (Optional)

• Digital Noise Reduction: DNR

• Auto Tracking White Balance: AWB

• Brightlight Masking Block: BMB

• Separate Camera Control Board

- OSD Menu

- Service Monitor Output

• 12VDC/24VAC Dual Voltage

CONSTRUCTION

• 4” Polycarbonate Bubble

• 3-Axis Gimbal

• Flush Mount Housing w/ Surface Mount Plate in a Single Package

• Aluminum Mounting Accessories (Optional)

• Ivory or Black Plastic Housing (Optional)

• Compact Size

AVAILABLE MODELS

• CD-ST21N-I (Ivory) - High Resolution

• CD-ST21N-B (Black) - High Resolution

• CD-STD21N-I (Ivory) - True Day/Night w/ ICR

• CD-STD21N-B (Black) - True Day/Night w/ ICR

OPTIONAL: EZ-COAX™

• For all NUVICO cameras with EZ-Coax™ system,

add the following underlined extensions: CD-00000CX

AVAILABLE ACCESSORIES

• CA-SMC30: Service Monitor Cable

• CV-WM: Indoor Wall Mount

• CA-OM: Outdoor Wall Mount

• CA-PM: Pedestal Mount

• CA-CMB: Corner Mount Bracket

• CA-PMB: Pole Mount Bracket

• CA-JB: Junction Box

• CA-JB2: Multipurpose Junction Box Enclosure

• EZ-CX1T: 1ch EZ-Coax™ Transceiver with built-in control buttons

• EZ-CX8T: 8ch EZ-Coax™ Transceiver (Requires CK-1000 for operation)

BENEFITS OF THE EASYVIEW™ 2 CAMERAS w/ EZ-COAX™

DIMENSIONS

S.I.E. 2 - our second generation ‘Super Image Enhancer’ module enhances the clarity and color accuracy of its predecessor by further refining our proprietary DSP technology. This new unique video processing technology radically enhances the low light performance of the EasyView™ 2 dome camera by utilizing super low light features such as DSS, DNR, Super BLC, AWB, and BMB, delivering excellent picture quality and higher resolution at 580 TV Lines.

BMB - Brightlight Masking Block

The EasyView™ 2 dome cameras incorporates many of the traditional BLC (Back Light Compensation) modes, but adds a new sophisticated form of BLC that literally blocks out the excessively bright areas within a frame and compensates the rest accordingly allowing for the otherwise “would be” overexposed areas of the frame to be viewable.

EZ-Coax™ - NUVICO Up-the-Coax Telemetry Control

Usually found in high-end PTZ cameras, this hi-tech transmission method allows access to the camera menu using only the coaxial cabling already running from the camera. The EZ-Coax™ Transceiver can then be used to gain telemetry control of the camera without running a separate communication line. This not only cuts down on installation cost and time, also makes all future maintenance simple and easy.

Unit: mm

Corporate Headquarters | [email protected] • T 866.523.1700 • 201.541.1605

International Operations | [email protected]

Customer Service | [email protected]

Technical Support | [email protected]

advertisement

Related manuals

advertisement