StarTech.com LTULOCK4D 6.5' (2m) 3-in-1 Universal Laptop Cable Lock Owner's Manual

Quick-Start Guide

1

Universal 4-Digit Combination Laptop Lock | Pivot and Rotate Hinge

Product Diagram (LTULOCK4D)

4 Adapter

2

Components

1 Security Cable

2 Bumper Spacers

3 Locking Hook

5 Adapter Slot

6 Guide Line

7

3 4 5 6

8

9

Function

• Used to secure a Device to a secure stationary object.

• Prevents the Lock from scratching the connected Device.

• Used to connect the Lock to a Lock Slot.

• Used to change the Lock head to accommodate different lock slots.

• Standard Slot = 3x7 mm slot

• Wedge Slot = 3.2x4.5 mm slot

• Nano Slot = 2.5x6 mm slot

• Used to house the Adapter.

• Used to enter a combination on the Dials .

• Align the combination digits with the Guide

Line .

7

Release Button

8 Dials

9 Reset Screw

• Used to release the Lock from the Lock Slot .

• Used to enter the Lock’s combination.

• Used to set a new combination.

Note: Once the combination is changed, if you lose the new combination you will not be able to reset the combination.

Requirements

For the latest requirements, please visit www.startech.com/LTULOCK4D.

• Default Combination = 0-0-0-0

Setting a New Combination

1. Align the numbers on the Dial with the Guide Line using the default combination

0-0-0-0.

2. Insert a Flathead Screwdriver (sold separately) into the Reset Screw and push the

Reset Screw in toward the Lock .

3. With the Reset Screw pushed in, turn the Reset Screw clockwise 90 degrees.

4. Rotate each of the Dials to the desired number.

5. Insert the Flathead Screwdriver into the Reset Screw and turn the Reset Screw counter-clockwise 90 degrees, moving the Reset Screw back to its original position.

The Reset Screw will pop back out when it is in the original position.

Note: Be sure to write down the new combination and keep it in a secure location away from the lock.

6. To set a new combination follow steps 1 - 5 using the new combination set up in

Step 4 instead of the default combination.

Installing a Lock Adapter

1. Select the Adapter that fits the Lock Slot on the Device you are trying to secure.

2. While pressing the Release button, insert the Adapter into the Adapter Slot on the

Lock , making sure that the Lock Adapter is pushed all the way into the Adapter

Slot and flush with the Lock .

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 30, 2019 4:34 PM

Locking a Device

1. Wrap the Security Cable around a secure stationary object and pull the Lock through the loop on the Security Cable .

Unlocking a Device

1. Enter the new combination that was created in the Setting a New Combination section.

2. Press and hold the Release Button . The locking mechanism will disengage from the

Lock Slot on the Device .

3. Pull the Lock out of the Lock Slot and release the Release Button.

Removing a Lock Adapter

• While pressing the Release button, remove the Adapter from the Adapter Slot .

Security Cable

2. Press and hold the Release Button and insert the Locking Hooks into the Lock Slot on a Laptop, Docking Station, or any other compatible Device .

3. Release the Release Button to engage the lock and rotate the Dials .

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty .

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください 。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com