GIGAIPC MZAPLAS User Manual

QBiP-4200A (MZAPLAS)

3.5” SBC Boards

User’s Manual 1st Ed

1 www.gigaipc.com

GIGAIPC reserves the right to modify or revise the content at anytime without prior notice.

Copyright Notice

This document is copyrighted, 2018. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translat¬ed, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no respon¬sibility for its use, or for any in¬fringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, GIGAIPC assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein.

GIGAIPC reserves the right to make changes in the product design without notice to its users.


www.gigaipc.com

2

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

• AMD® is trademark of Advanced Micro Devices.

• Microsoft Windows is a registered trademark of Microsoft Corp.

• Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel

Corporation

• Core, Atom are trademarks of Intel Corporation

• ITE is a trademark of Integrated Technology Express, Inc.

• IBM, PC/AT, PS/2, and VGA are trademarks of International Business

Machines Corporation.

All other product names or trademarks are properties of their respective owners.



Packing List

Before setting up your product, please make sure the following items have been shipped:

Item

QBiP-4200A (MZAPLAS)

SATA power cable

1

Quantity

1

If any of these items are missing or damaged, please contact your distributor or sales representative immediately.


www.gigaipc.com

4

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product.

Users may refer to the GIGAIPC.com for the latest version of this document.



Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything over the power cord.

4. Always completely disconnect the power before working on the system’s hardware.

5. No connections should be made when the system is powered as a sudden rush of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls

12. Do not cover the openings on the device to ensure optimal heat


www.gigaipc.com

6

dissipation.

13. Watch out for high temperatures when the system is running.

14. Do not touch the heat sink or heat spreader when the system is running

15. Never pour any liquid into the openings. This could cause fire or electric shock.

16. As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers.

17. If any of the following situations arises, please the contact our service personnel: i. Damaged power cord or plug ii. Liquid intrusion to the device iii. Exposure to moisture iv. Device is not working as expected or in a manner as described in this manual v. The device is dropped or damaged vi. Any obvious signs of damage displayed on the device

18. D O N OT L E AV E T H I S D E V I C E I N A N UN CO N T RO L L ED

ENVIRONMENT WITH TEMPERATURES BEYOND THE DEVICE’S

PERMITTED STORAGE TEMPERATURES (SEE CHAPTER 1) TO

PREVENT DAMAGE.



FCC Statement

This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions and your local government’s recycling or disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et les directives gouvernementales de recyclage.


www.gigaipc.com

8

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

GIGAIPC Main Board/ Daughter Board/ Backplane

有毒有害物质或元素

部件名称

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯

醚

(PBDE)

印刷电路板

及其电子组件

○ ○ ○ ○ ○ ○

外部信号

连接器及线材

○ ○ ○ ○ ○ ○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的

某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。



China RoHS Requirement (EN)

Poisonous or Hazardous Substances or Elements in Products

GIGAIPC Main Board/ Daughter Board/ Backplane

Poisonous or Hazardous Substances or Elements

Component

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

Biphenyls

(PBB)

Polybrominated

Diphenyl

Ethers (PBDE)

PCB & Other

Components

O O O O O ○

Wires &

Connectors for External

Connections

O O O O O O

O：The quantity of poisonous or hazardous substances or elements found in each of the component's parts is below the SJ/T 11363-2006-stipulated requirement.

X: The quantity of poisonous or hazardous substances or elements found in at least one of the component's parts is beyond the SJ/T 11363-2006-stipulated requirement.

Note: The Environment Friendly Use Period as labeled on this product is applicable under normal usage only


www.gigaipc.com

10

Table Contents

3.5” SBC Boards

User’s Manual 1st Ed

1

1

Copyright Notice ............................................................................. 2

Acknowledgement .......................................................................... 3

Packing List ...................................................................................... 4

About this Document ...................................................................... 5

Safety Precautions .......................................................................... 6

FCC Statement ................................................................................. 8

China RoHS Requirements (CN) ....................................................... 9

China RoHS Requirement (EN) ...................................................... 10

Chapter1 - Product Specifications 13

1.1 Specifications- QBiP-4200A ............................................. 15

Chapter 2 – Hardware Information 17

2.1 Jumpers and Connectors ................................................ 18

2.2.1 FAN (FAN connector) ...................................................... 21

2.2.2 DC IN (DC IN 1x2pin ATX power connector) ................... 22

2.2.3 COM1, COM2, COM3, COM4 (Serial port header) .......... 23

2.2.4 SPK_OUT (Speaker out connector) .................................. 24

2.2.5 JCOM11 (COM11 RI# pin RI#/5V/12V Select) ................... 25

2.2.6 JCOM12 (COM1 RS-232/RS-422/RS-485 Select) ............. 26

2.2.7 JRS11-JRS14 (RS11-14 select jumper for serial port) ........ 27



2.2.8 AT_CN (AT/ATX power mode select jumper) ................... 28

2.2.9 LSW (LVDS resolution jumper) ......................................... 29

2.2.10 LVDS (LVDS connector) ..................................................... 30

2.2.11 BKL_CN (Back light brightness control connector) .......... 31

2.2.12 BUZZER ............................................................................. 32

2.2.14 SATAPW (SATA 6Gb/s power connector) .................... ... 34

2.2.15 SATAIII (SATA 6GB/S Connector) ................................. ... 35

2.2.16 FUSB2_1 (USB 2.0 header) ............................................... 36

2.2.17 GPIO_CNT (General Purpose input/output header) ... ... 37

2.2.18 SYS_PANEL (Front panel header) ..................................... 38

2.2.19 EDP (Embedded Display Port Connector) ................... ... 39


www.gigaipc.com

12

Chapter 1

Chapter1 - Product Specifications

QBiP-4200A (MZAPLAS)




www.gigaipc.com

14

1.1 Specifications- QBiP-4200A

Motherboard

Form Factor

CPU

Socket

Chipset

Memory

Ethernet

Video

Audio

Storage

Raid

Expansion Slots

QBiP-4200A

3.5'' SBC

146W x 101.7Dmm

Intel® Pentium® Processor N4200

14nm, 4 cores, 4 threads 1.10 - 2.50 GHz

2MB L2 cache TDP 6W

1 x FCBGA1296

—

2 x DDR3L SO-DIMM sockets, Max. Capacity 8 GB

Dual channel memory architecture

Support DDR3L 1866MHz memory modules

2 x GbE LAN ports (Intel® i211AT)

Integrated Graphics Processor -Intel® HD Graphics 505

1 x HDMI port, supporting a maximum resolution of

3840x2160 @ 30Hz

1 x D-SUB port: max. resolution 2560 x 1600 at 60Hz (with compatible displays)

1 x LVDS port, supporting a maximum resolution of 1920 x

1080@60Hz

1 x eDP port, supporting a maximum resolution of 3840 x

2160 @ 60Hz

Realtek ALC269

High Definition Audio

1 x SATA 6Gb/s port ,

1 x eMMC 32GB

—

1 x M.2 slot:

- M-key

- SATA 6Gb/s

- Supports NGFF-2240 cards

1 x Mini-PCIe slot

- Full card size

-Support PCIe X1+USB2.0 --support 3G module



Motherboard

Internal I/O

Rear I/O

TPM

OS Compatibility

PSU Connectors

Operating Properties

QBiP-4200A

1 x 2 pin ATX Power Connector (DC in)

1 x SATA 6Gb/s connectors

1 x Buzzer header

1 x System fan header

1 x Front panel header

1 x Front panel audio header

1 x Speaker out header

1 x SATA Power header

2 x USB 2.0/1.1 headers

1 x GPIO (4 in / 4 out)

3 x COM headers (RS232)

1 x COM header (RS422/485/232, RI/5V/12V)

1 x Back Light Switch

1 x AT mode select jumper

1 x 3G Sim Slot.

1 x SMBUS header

1 x LVDS connector

1 x eDP connector

1 x Audio jack (Line out)

1 x HDMI

1 x D-sub

2 x RJ45

2 x USB3.0

1 x TPM Header

Windows 10 (x64)

1 x 2 pin ATX power connector (9~36V)

Operating temperature: 0°C to 60°C

Operating humidity: 0-90% (non-condensing)

Non-operating temperature: -20°C to 70°C

Non-operating humidity: 0%-95% (non-condensing)


www.gigaipc.com

16

Chapter 2

Chapter 2 – Hardware Information



2.1 Jumpers and Connectors

8 9

4

3

19

7

6

5

2

18 17 16 15 14 13

10

11

12

1


www.gigaipc.com

18

No

1 FAN

Code

2 DC_IN

3

COM1

COM2

COM3

COM4

FAN connector

Description

DC IN 1x2pin ATX power connector

Serial port header

4 SPK_OUT

5 JCOM11

Speaker out connector

COM11 RI# pin RI#/5V/12V Select

6 JCOM12 COM12 RS-232/RS-422/RS-485 Seleect

7 JRS11-JRS14 COM1 select jumper for serial port

8 AT_CN

9 LSW

AT/ATX power mode select jumper

LVDS resolution jumper

10 LVDS

11 BKL_CN

12 BUZZER

13 BATTERY

14 SATAPW

15 SATAIII

LVDS connector

Back light brightness control connector

—

Battery cable connector

SATA 6Gb/s power connector

SATA 6GB/S Connector

16 FUSB2_1 USB 2.0 header

17 GPIO_CNT General Purpose input/output header

18 SYS_PANEL Front panel header

19 eDP eDP Connector



2.2.1 FAN (FAN connector)

1

PIN 1

CPU/System FAN

Pin No.

3

4

1

2

1 2 3 4

Definition

GND

12V

Detect

Speed Control

Connector PN

85205-0470N

A1250WV-S-04PC

Vendor

ACES

JOINT-TECH


www.gigaipc.com

20

2.2.2 DC IN (DC IN 1x2pin ATX power connector)

2

DC 1 x 2 pin ATX Power Connector



2.2.3 COM1, COM2, COM3, COM4 (Serial port header)

3

Pin1

Serial Port Cable Connector Connector PN Vendor

725-81-10TW00 PINREX

A2004WV-2X05P46 JOINT-TECH

Pin No.

6

7

4

5

1

2

3

8

9

10

Definition

RXD

DCD

DTRD

TXD

DSR

GND

CTS

RTS

No Connect

RI/5V/12V


www.gigaipc.com

22

2.2.4 SPK_OUT (Speaker out connector)

4

PIN 1

Speaker out connector

Pin No.

3

4

1

2

Definition

Speaker Out L+

Speaker Out L-

Speaker Out R-

Speaker Out R+

Connector PN Vendor

721-81-045W00 PINREX

A2001WV-04P146 JOINT-TECH



2.2.5 JCOM11 (COM11 RI# pin RI#/5V/12V Select)

5

PIN 1

JCOM11 Jumper Select

1-2 Close:

5V (Power COM)

3-4 Close:

RI (Stand COM)

(Default Setting)

5-6 Close:

12V (Power COM)

Connector PN

220-97-03GB01

PH06N53BAZ000

Vendor

PINREX

HORNGTONG


www.gigaipc.com

24

2.2.6 JCOM12 (COM1 RS-232/RS-422/RS-485 Select)

6

PIN 1

JCOM12 Jummper

1-2 Close:

RS-232

3-4 Close:

RS-422

(Default Setting)

5-6 Close:

RS-485

Pin No.

5

6

3

4

1

2

Connector PN

220-97-03GB01

PH06N53BAZ000

Definition

RXD232

RXD1

RXD422

RXD1

RXD485

RXD1

Vendor

PINREX

HORNGTONG



2.2.7 JRS11-JRS14 (RS11-14 select jumper for serial port)

7

PIN 1

PIN 1

RS11-14 select jumper for serial port

1-2 Close:

RS422/RS485

2-3 Close:

RS232 (Default Setting)


200-72-PBGB03 PINREX

MJ20-O-102S-H3.5-BK HSD-CONN


www.gigaipc.com

26

2.2.8 AT_CN (AT/ATX power mode select jumper)

8

PIN 1

AT/ATX power mode select jumper

1-2 Close : AT mode.

2-3 Close : ATX mode.

(Default setting)

Pin No.

1

2

3

Definition

AT MODE

Detect

ATX MODE


220-96-03GB01 PINREX

PH03N2-7BAN000 HORNGTONG



2.2.9 LSW (LVDS resolution jumper)

9

PIN 1

LVDS Resolution Jummper

Jumper

Setting Resolution

800 x 600

18bit

1024 x 768

18bit

1024 x 768

24bit

1024 x 600

18bit

1280 x 800

18bit

1280 x 960

18bit

1280 x 1024

24bit

1366 x 768

18bit

Jumper

Setting

Resolution

1366 x 768

24bit

1440 x 900

24bit

1400 x 1050

24bit

1600 x 900

24bit

1680 x 1050

24bit

1600 x 1200

24bit

1920 x 1080

24bit

1920 x 1200

24bit

Connector PN

222-97-04GBE1


Vendor

PINREX www.gigaipc.com

28

2.2.10 LVDS (LVDS connector)

10

PIN 1

LVDS Connector Pin No. Definition Pin No.

17

18

19

20

A3-

A2-

GND

GND

37

38

39

40

Definition

GND

GND

12V

12V

Pin No. Definition Pin No.

3

4

1

2

3.3V

5V

3.3V

5V

21

22

23

24

9

10

11

12

7

8

5

6

13

14

15

16

SPEC0

SPED0

GND

GND

A1+

A0+

A1-

A0-

GND

GND

A3+

A2+

29

30

31

32

25

26

27

28

33

34

35

36


Definition

A5+

A4+

A5-

A4-

GND

GND

A7+

A6+

A7-

A6-

GND

GND

CLK2+

CLK1+

CLK2-

CLK1-

Connector PN

712-76-40GWE0

A1252WV-SF-2X20PD01

Vendor

PINREX

JOINT-TECH


2.2.11 BKL_CN (Back light brightness control connector)

11

PIN 1

Back light brightness control connector

Connector PN

721-81-05TW00

A2001WV-05P146

Vendor

PINREX

JOINT-TECH

Pin No.

3

4

1

2

5

Definition

5V

PWM

Back Light Enable

GND

12V


www.gigaipc.com

30

2.2.12 BUZZER

12

PIN 1

Buzzer

Pin No.

1

2

Definition

-SPKR

+VS5

Connector PN

712-71-02TW01

A1250WV-02P

Vendor

PINREX

JOINT-TECH



2.2.13 BATTERY

13

PIN 1

Pin No.

1

2

Battery Cable Connector

Definition

3.0V RTC

GND

Connector PN

85205-0270L

A1250WV-S-02PC

Vendor

ACES

JOINT-TECH


www.gigaipc.com

32

2.2.14 SATAPW (SATA 6Gb/s power connector)

14

PIN 1

Hard Disk Power Connector Connector PN Vendor

743-81-04TW00 PINREX

WF04Q2-3BJQ000 HORNGTONG

Pin No.

3

4

1

2

Definition

+12V

GND

GND

VCC



2.2.15 SATAIII (SATA 6GB/S Connector)

15

Pin No.

5

6

7

3

4

1

2

SATA 6GB/S Connector

Definition

GND

TXP

TXN

GND

RXN

RXP

GND

SATAIII


WAT3M-07A1G3BU4W WINWIN

ABA-SAT-054-S15 LOTES


www.gigaipc.com

34

2.2.16 FUSB2_1 (USB 2.0 header)

16

PIN 1

USB 2.0 Header Connector PN

210-92-05GB04

PH10R53BAZ009

Vendor

PINREX

HORNGTONG

Pin No.

1

4

5

2

3

6

9

10

7

8


Definition

5V

5V

DX-

DY-

DX+

DY+

GND

GND

No Pin

No Connect


2.2.17 GPIO_CNT (General Purpose input/output header)

17

PIN 1

GPIO Connector Connector PN

725-81-12TW00

A2004WV-2X06P46

Vendor

PINREX

JOINT-TECH

Pin No.

5

6

7

8

1

2

3

4

9

10

11

12

Definition

GPO1

GPI1

GPO2

GPI2

GPO3

GPI3

GPO4

GPI4

SMB_CLK

SMB_DATA

5V

GND


www.gigaipc.com

36

2.2.18 SYS_PANEL (Front panel header)

18

PIN 1

System Panel Header Connector PN

210-92-05G111

Vendor

PINREX

Pin No.

8

9

6

7

10

1

4

5

2

3


Definition

HDD LED+

Power LED+

HDD LED-

Power LED-

GND

Power Button+

Reset Button

Power Button-

No Connect

No Pin


2.2.19 EDP (Embedded Display Port Connector)

19

PIN 1

Embedded Display Port connector Pin

No.

8

9

10

Definition Pin eDPSW eDP_1-

GND

No.

18

19

20

Definition

HDP

5V

3.3V

Note:Please ensure pin 8 is connected to

Ground.

Pin

No.

5

6

3

4

1

2

7

Definition Pin

No.

Definition

GND

GND

11

12 eDP_1+ eDPAUXeDP_013 GND eDP_314 eDPAUX+ eDP_0+ 15 eDP_3+ 16 eDP_2-

GND

GND 17 eDP_2+

Connector PN

A1252WV-SF-

2X10PN6BG1G00L

50286-02071-001


Vendor

JOINT-TECH

ACES www.gigaipc.com

38

GIGAIPC MZAPLAS User Manual

QBiP-4200A (MZAPLAS)

3.5” SBC Boards

User’s Manual 1st Ed

Copyright Notice

Acknowledgement

Packing List

About this Document

Safety Precautions

FCC Statement

China RoHS Requirements (CN)

China RoHS Requirement (EN)

Table Contents

3.5” SBC Boards

User’s Manual 1st Ed

1

1

Chapter1 - Product Specifications 13

Chapter 2 – Hardware Information 17

Chapter 1

Chapter1 - Product Specifications

QBiP-4200A (MZAPLAS)

1.1 Specifications- QBiP-4200A

Chapter 2

Chapter 2 – Hardware Information

2.1 Jumpers and Connectors

2.2.1 FAN (FAN connector)

2.2.2 DC IN (DC IN 1x2pin ATX power connector)

2.2.3 COM1, COM2, COM3, COM4 (Serial port header)

2.2.4 SPK_OUT (Speaker out connector)

2.2.5 JCOM11 (COM11 RI# pin RI#/5V/12V Select)

2.2.6 JCOM12 (COM1 RS-232/RS-422/RS-485 Select)

2.2.7 JRS11-JRS14 (RS11-14 select jumper for serial port)

2.2.8 AT_CN (AT/ATX power mode select jumper)

2.2.9 LSW (LVDS resolution jumper)

2.2.10 LVDS (LVDS connector)

2.2.11 BKL_CN (Back light brightness control connector)

2.2.12 BUZZER

2.2.13 BATTERY

2.2.14 SATAPW (SATA 6Gb/s power connector)

2.2.15 SATAIII (SATA 6GB/S Connector)

2.2.17 GPIO_CNT (General Purpose input/output header)

2.2.18 SYS_PANEL (Front panel header)

2.2.19 EDP (Embedded Display Port Connector)

Related manuals

GIGAIPC

QBiP-1185G7EBT

GIGAIPC

uATX-W48EA

GIGAIPC

QBiX-Pro Series

GIGAIPC

QBiX-Pro-APLB4200H-A1

GIGAIPC

QBiP-1900AT

GIGAIPC

QBiP-8265A

GIGAIPC

QBiP-1505A

GIGAIPC

QBiP-5005B

GIGAIPC

QBiP-N97A

GIGAIPC

QBiX-Pro Series

GIGAIPC

QBiP-1605A

GIGAIPC

QBiP-E3940AT