NewAir AWR-190SB 12" Built-In 19 Bottle Wine Fridge in Stainless Steel, Product Manual
Add to my manuals
13 Pages
advertisement
AWR-190SB
19 Bottle Compressor
Wine Cooler
OWNER’S MANUAL
Read and save these instructions.
Manual v1.4
2
READ AND SAVE THESE INSTRUCTIONS.
TABLE OF CONTENTS
Register Your Product Online……………………………………………………………………………3
SPECIFICATIONS
M ODEL N O .
V OLTAGE :
C URRENT :
F
REQUENCY
:
P
OWER
C
ONSUMPTION
:
S TORAGE C APACITY :
T EMPERATURE R ANGE :
AWR-190SB
110-120V
1.2A
60Hz
90W
2.5 cubic feet
40°F - 66°F
P RODUCT W EIGHT : 64 lbs
U NIT D IMENSIONS : 22.60"D (24.25" w/handle) x
11.60"W x 33.90"H newair.com
3
REGISTER YOUR PRODUCT ONLINE
Register Your NewAir Product Online Today!
Take advantage of all the benefits product registration has to offer:
Service and Support
Diagnose troubleshooting and service issues faster and more accurately
Recall Notifications
Stay up to date for safety, system updates and recall notifications
Special Promotions
Opt-in for NewAir promotions and offers
Registering your product information online is safe & secure and takes less than 2 minutes to complete:
newair.com/register
Alternatively, we recommend you attach a copy of your sales receipt below and record the following information, located on the manufacturer’s nameplate on the rear of the unit. You will need this information if it becomes necessary to contact the manufacturer for service inquiries.
Date of Purchase: ___________________________________________
Serial Number: ____________________________________________
Model Number: ____________________________________________
4
SAFETY INFORMATION & WARNINGS
When using any electrical appliance, basic safety precautions must be followed in order to reduce the risk of fire, electrical shock and/or injury to persons or property. Be sure to read all instructions before using this appliance and observe the following safety tips:
Attention: To avoid the risk of child entrapment, do not allow children to operate, play with, or crawl inside the unit.
If the unit will not be used for an extended period of time, remove the door and leave the shelves in place so that children cannot crawl inside. Also remove the door when disposing of the unit.
Shock Hazard – Electrical Grounding Required
• Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected.
• Never remove the round grounding prong from the plug and never use a twoprong grounding adaptor.
• Altering or cutting of power cord, removal of power cord, removal of power plug, or direct wiring can cause serious injury, fire, and loss of property and/or life, and will void the warranty.
• Never use an extension cord to connect power to the unit.
• Avoid operating this wine cooler in excessively moist or humid environments.
Important Precautions:
• Do not lift unit by door handle.
• Never install or operate the unit behind closed doors.
• Be sure the kick-plate on the front bottom is free of obstruction. Obstructing airflow can cause the unit to malfunction and will void the warranty.
• Failure to clean the condenser every six months can cause the unit to malfunction.
• Allow unit temperature to stabilize for 24 hours before use.
• Do not block any internal fans.
• Keep the wine cooler away from hazardous materials or combustible/flammable substances.
• Use only genuine supplier’s replacement parts. Imitation parts can damage the unit, affect its operation or performance, and may void the warranty. newair.com
PARTS LIST
5
6
INSTALLATION
Before connecting the appliance to a power source, let it stand upright for approximately 24 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Before operating your wine cooler for the first time, follow these steps:
• Remove the exterior and interior packing.
• Clean the interior surface of the unit with lukewarm water and a soft cloth.
• Place the cooler on a level surface that will be strong enough to support the unit when it is fully loaded. To level your cooler, adjust the front feet located at the bottom of the unit.
DOOR HANDLE ASSEMBLY
Tools Required for Assembly: Phillips screwdriver (not included)
Estimated Assembly Time: 5 minutes
Before installation, attach the handle to the front of the unit with the included screws. It may be necessary to push aside the rubber seal on the inside of the door to reveal the screw holes. Caution: Avoid over-tightening the screws, or you may cause damage to the unit.
REVERSING THE DOOR SWING
The door hinge is on the left side by default. If you wish to reverse the swing so that the door opens from the right, it is important to have at least one other person to help. It is dangerous to try to reverse the door swing by yourself.
1.
Unscrew the upper door hinge while the second person supports the door.
2.
Remove the upper hinge and carefully lift the door off the bottom hinge.
3.
Unscrew the bottom hinge and install it on the left side of the unit.
4.
Flip the door around so that the handle is on the right side and slip the door over the bottom hinge.
5.
Reattach the door by screwing the top hinge into the holes provided on the upper left surface of the unit. Make adjustments as necessary to be sure the door is aligned properly. newair.com
7
OPERATING INSTRUCTIONS
HOW TO USE THE BUTTONS ON THE DISPLAY PANEL
Raise the desired temperature. *
Lower the desired temperature. *
* To set the temperature, press the UP or DOWN button on the control panel.
The interior temperature can be adjusted in increments of 1 degree between
40°F and 66°F (5° - 18°C).
The interior light can be turned on or off by pressing the “Light” button.
ADDITIONAL NOTES
• The appliance should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience.
• Children should not play with the appliance. Cleaning and user maintenance should be performed under adult supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a safety hazard.
• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or means other than those recommended by the manufacturer to accelerate the defrosting process.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances other than those recommended by the manufacturer inside the wine storage compartments of the appliance.
• Do not store explosive substances such as aerosol cans with a flammable propellant in the appliance.
• This appliance is intended for use only in the household, office and similar environments.
8
USING YOUR MOISTURE TRAY
This unit comes with a plastic water tray to help maintain the moisture in the air inside the unit, helping to prevent corks from drying out. Fill the container up about halfway and place it on any of the shelves toward the back of the unit. Use caution when moving shelves or inserting/removing bottles, as the water tray might spill. newair.com
9
CLEANING & MAINTENANCE
CLEANING YOUR COOLER
To clean your cooler:
• Unplug the cooler and remove anything inside.
• Wash the inside of the unit with a solution made of warm water and baking soda solution (2 tablespoons of baking soda to one quart of water).
• Unscrew the water reservoir at the bottom of the unit and rinse with water.
• To clean the outside of the unit, use a mild detergent and warm water.
MOVING YOUR COOLER
To move your cooler:
• Remove anything stored inside.
• Securely tape down all loose parts located inside the unit.
• Turn the leveling feet up to the base in order to avoid damage.
• Tape the door shut.
• Be sure the cooler stays in an upright position during transportation.
10
WINE STORAGE GUIDE
• The ideal temperature for storing red or white wines is 55°F, with humidity between 60% and 75% RH.
• Store corked bottles on their sides, to keep the cork from drying out and allowing air into the bottle.
• UV rays make wine age faster, so keep bottles out of direct sunlight.
• Avoid heavy vibrations from motors, etc.
• Store wine separately from strong odors that might contaminate the flavor of the wine.
HOW LONG SHOULD I STORE MY WINE?
While most wines today are meant to be drunk “young” (within a few years of production) some fine wines are best served by proper aging. But aging too long can decrease the flavor of the wine. Generally speaking, red wines can age longer than white wines, but here is a storage guide for some popular vintages.
Cabernet Sauvignon ....................... 7-10 years
Pinot Noir ....................................... 5 years
Merlot ............................................ 3-5 years
Zinfandel ........................................ 2-5 years
Beaujolais ....................................... Drink now
Chardonnay .................................... 2-3 years
Riesling ........................................... 3-5 years
Sauvignon Blanc ............................. 18 months – 2 years
Pinot Gris ........................................ 1-2 years
Champagne .................................... Ready to drink newair.com
11
TROUBLESHOOTING
Problem
Wine cellar does not operate.
Wine cellar is not cold enough.
The light does not work.
The cooler vibrates while operating.
The cooler produces a lot of noise.
Possible Causes
The unit may be plugged in using a different voltage.
The circuit breaker may be tripped or there is a blown fuse.
The external environment may require a higher setting.
The door may be opened too frequently.
The door is not closed completely.
The door seal does not seal properly.
The front grille is obstructed.
There may be a problem with the display board.
The unit is not sitting on a level floor, or the unit’s feet are not correctly installed.
Solution
Check if using the wrong voltage.
Reset the circuit breaker or check for a broken fuse
Lower the temperature of the cooler.
Open the door less frequently.
Make sure the door is closed securely.
Replace the seal on the door. Replacements can be acquired from the manufacturer.
Make sure nothing is blocking the front grille.
Contact the manufacturer.
Make sure the unit’s feet are in the proper position and tightened securely.
The unit is not leveled. See above.
The door will not close properly.
The fan may be obstructed
Check the fan to make sure there is no debris or obstruction. If not, contact the manufacturer.
The unit is not leveled. See above.
Problem
The LED display does not work.
There is an LED display error, or the LED displays “LO”.
The buttons do not function.
12
Possible Causes
The door is not properly installed.
The seal is weak.
The shelves are out of position.
Solution
Check the door hinges to make sure they are properly installed.
Replace the seal on the door. Replacements can be acquired from the manufacturer.
Make sure the shelves slide all the way into the unit.
Contact the manufacturer.
There may be a problem with the main control board.
There is a problem with the plug.
The cooling kit is no longer working properly.
Contact the manufacturer.
Contact the manufacturer.
The PC Board is faulty. Contact the manufacturer.
The temperature control panel may be damaged.
Contact the manufacturer. newair.com
13
LIMITED MANUFACTURER’S WARRANTY
This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer.
Warranty Terms:
During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer’s discretion, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportation costs, if needed.
Warranty Exclusions:
The warranty will not apply if damage is caused by any of the following:
• Power failure
• Damage in transit or when moving the appliance
• Improper power supply such as low voltage, defective household wiring or inadequate fuses
• Accident, alteration, misuse or abuse of the appliance such as using non-approved accessories, inadequate air circulation in the room or abnormal operating conditions (extreme temperatures)
• Use in commercial or industrial applications
• Fire, water damage, theft, war, riot, hostility or acts of God such as hurricanes, floods, etc.
• Use of force or damage caused by external influences
• Partially or completely dismantled appliances
• Excess wear and tear by the user
Replacement parts and/or units will be new, re-manufactured or refurbished and is subject to the manufacturer’s discretion. For technical support and warranty service, please email [email protected]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement