Model No. EM-8099

Equipment List

Induction Wand

Model No. EM-8099

1

012-08505A

Included Equipment

1. Induction Wand

*Use Replacement Model Numbers to expedite replacement orders.

Additional Equipment Recommended (for experiments)

Faraday’s Law of Induction apparatus

ScienceWorkshop

®

interface (500 or 750 SCSI or 750 USB)

DataStudio

®

software

A computer

NA= not for sale at PASCO scientific

Replacement

Model Number*

EM-8099

Replacement

Model Number*

EX-9914

CI-6400 or CI-6450 or

CI-7650 various

(See PASCO catalog)

NA

® 3

4

Induction Wand Model No. EM-8099

Introduction

The PASCO EM-8099 Induction Wand is useful for demonstrations of electromagnetic induction. It can be used in combination with the

PASCO EM-6711 Field Coil to a) verify Faraday’s Law and b) measure the relationship between the magnitude of the induced electromotive force and the angle of the magnetic field of a field coil and a pickup coil.

1

Equipment Description

The 200-turn Induction Wand has a wire coil on one end and two terminals at the other end. The terminals accommodate the banana plug contacts, permitting easy connection to an electric circuit.

Specifications

Induction Wand

No. of turns

Coil dimensions

Body material

Total wand length:

Handle dimensions:

200 turns, #28 copper wire, approximately 0.32 mm diameter inner diameter: 1.9 cm; outer diameter 3.1 cm molded ABS plastic

35.7 cm width: 1.9 cm; height: 1.25 cm; length: 31.5 cm

1

For an induction experiment, see Christopher C. Jones.

Faraday’s Law Apparatus for the Freshman Laboratory. Am. J

Physics . 1987; 55(12): 1148-1150.

CAUTION: Do not use the wand at currents exceeding 625 mA.

®

Model No. EM-8099 012-08505A

Technical Support

For assistance with the EM-8099 Induction Wand or any other PASCO products, contact

PASCO as follows:

Address: PASCO scientific

10101 Foothills Blvd.

Roseville, CA 95747-7100

Phone: (916) 786-3800

FAX: (916) 786-3292

Web: www.pasco.com

Email: [email protected]

Limited Warranty

PASCO scientific warrants the product to be free from defects in materials and workmanship for a period of one year from the date of shipment to the customer. PASCO will repair or replace, at its option, any part of the product which is deemed to be defective in material or workmanship. The warranty does not cover damage to the product caused by abuse or improper use. Determination of whether a product failure is the result of a manufacturing defect or improper use by the customer shall be made solely by PASCO scientific.

Responsibility for the return of equipment for warranty repair belongs to the customer.

Equipment must be properly packed to prevent damage and shipped postage or freight prepaid. (Damage caused by improper packing of the equipment for return shipment will not be covered by the warranty.) Shipping costs for returning the equipment after repair will be paid by PASCO scientific.

Equipment Return

If the product requires return to PASCO scientific for any reason, notify PASCO scientific by letter or phone before returning the product. Upon notification, the return authorization and shipping instructions will be promptly issued.

® 5