advertisement
MiniSmart II Secure Smart Card Reader
User Manual
80161502-001 Rev. C
1 October 2019
ID TECH
10721 Walker Street, Cypress, CA 90630-4720
Tel: (714) 761-6368 Fax (714) 761-8880 www.idtechproducts.com [email protected]
MiniSmart II User Manual
ID TECH
10721 Walker Street,
Cypress, CA90630
Voice: (714) 761-6368 Fax: (714) 761-8880
ID TECH, Inc. All rights reserved
The information contained herein is provided to the user as a convenience. While every effort has been made to ensure accuracy, ID TECH is not responsible for damages that might occur because of errors or omissions, including any loss of profit or other commercial damage, nor for any infringements or patents or other rights of third parties that may result from its use. The specifications described herein were current at the time of publication but are subject to change at any time without prior notice.
LIMITED WARRANTY
ID TECH warrants to the original purchaser for a period of 12 months from the date of invoice that this product is in good working order and free from defects in material and workmanship under normal use and service. ID TECH’s obligation under this warranty is limited to, at its option, replacing, repairing, or giving credit for any product that returned to the factory of origin with the warranty period and with transportation charges and insurance prepaid, and which is, after examination, disclosed to ID TECH’s satisfaction to be defective. The expense of removal and reinstallation of any item or items of equipment is not included in this warranty. No person, firm, or corporation is authorized to assume for ID TECH any other liabilities in connection with the sales of any product. In no event shall ID TECH be liable for any special, incidental or consequential damages to purchaser or any third party caused by any defective item of equipment, whether that defect is warranted against or not. Purchaser’s sole and exclusive remedy for defective equipment, which does not conform to the requirements of sales, is to have such equipment replaced or repaired by ID TECH. For limited warranty service during the warranty period, please contact ID TECH to obtain a Return Material
Authorization (RMA) number & instructions for returning the product.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
PARTICULAR PURPOSE. THERE ARE NO OTHER WARRANTIES OR GUARANTEES, EXPRESS OR
IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS PRODUCT IS SOLD AS IS. IN NO EVENT SHALL
ID TECH BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS OR IMPLIED WARRANTY OF
NEGLIGENCE OF ANY OTHER DAMAGES WHETHER DIRECT, IMMEDIATE, FORESEEABLE,
CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSE INCURRED BY REASON OF THE USE OR
MISUSE, SALE OR FABRICATIONS OF PRODUCTS WHICH DO NOT CONFORM TO THE TERMS AND
CONDITIONS OF THE CONTRACT.
ID TECH and Value through Innovation are trademarks of International Technologies & Systems
Corporation. USB (Universal Serial Bus) specification is copyright by Compaq Computer Corporation,
Intel Corporation, Microsoft Corporation, and NEC Corporation. Windows is registered trademarks of
Microsoft Corporation.
Page | 2
MiniSmart II User Manual
FCC warning statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The user manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20cm from all persons.
Cautions and Warnings
Caution : The ViVOpay Vendi should be mounted 1-2 feet away from other
ViVOpay Vendi. Can be adjusted based on lane setup.
Caution : Danger of Explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.
Warning : Avoid close proximity to radio transmitters which may reduce the ability of the reader.
Page | 3
MiniSmart II User Manual
Table of Contents
Page | 4
MiniSmart II User Manual
1.
Introduction
The MiniSmart II is ID TECH’s EMV-ready, smart card interface that is certified for EMV Level 1 and
Level 2. The MiniSmart II maintains a compact form factor and supports interfaces such as USB,
UART, and RS-232. The MiniSmart II has smooth integration abilities that adapts well for EMV transactions and fills the need for a compact, reliable card reader that can serve a wide variety of space-limited applications.
For information about document abbreviations please visit Section 10.
2.
Product Configurations
The product comes with and without USB-HID or RS-232 connectors.
MINI2-00 MiniSmart II;UART&USB-HID;FPC;No Bezel
MINI2-20 MiniSmart II;RS-232;Connector;No Bezel
MINI2-50 MiniSmart II;USB-HID;Connector;No Bezel
3.
Features
• EMV L1 certified (L2 pending)
• TDES/AES encryption
• DUKPT Key Management (ANSI X9-24)
• Reads ISO 7816 (1,2,3,4) (T=0, T=1) (Class A, B, C) microprocessor cards
• Interface includes: RS-232, UART, USB-HID
• Small form factor: 66 x 33.2 x 6.6 mm
• Friction contacts
• Designed for a minimum of 500,000 cycles and 300,000 operating hours (MTBF)
• Support for remote key injection
• Firmware can be updated in the field
• Supports both clear text output and cipher text output
• FCC/CE certified
• Available with Universal SDK (C# on Windows or Java on Android)
4.
Applicable Documents
P/N 80000408-001 Communication Protocol of ID TECH Products
P/N 80000404-001 ID-Tech Encrypted Data Format in Command Response Specification
EMV Specifications Available from http://www.emvco.com/specifications.aspx
API Reference See ID TECH document 80161508-001, MiniSmart II Commands.
Page | 5
5.
Specifications
Outline Diagram :
MiniSmart II User Manual
Page | 6
1.
Size and Weight :
• Main Body size: 66.0mm(L) x 33.2mm(W) x 6.6mm(H)
• Weight: 13.40g
2.
Mounting Method :
• Four mounting holes
• Insertion installation through 2 side edges of PCA board
3.
Module Interface :
• FPC cable to connect terminal
• RS-232 adapter connects to terminal through cable
• USB adapter connects to terminal through cable
Connections
Smart Card Connector
• Model type: Amphenol-M-C702 series
• Dimension:57.2(L) x 31.2(W) x 3.3(H) mm
• Frictional (sliding) contact connector
• Durability: 500,000 cycles
PCA
• PCB: 66mm (L) x 33.2mm (W) x 1.0mm (H)
• FPC: Material: PI, 8PIN, 1.0 pitch, 38mm (L), thickness: 0.15mm.
MiniSmart II User Manual
Page | 7
Environmental
Temperature Operating: 32°F to 131°F (0°C to 55°C) non-condensing
Storage: -22°F to 149°F (-30°C to 65°C) non-condensing
MiniSmart II User Manual
Humidity Operating: maximum 95% non-condensing
Storage: maximum 95% non-condensing
Electrical
Electrical Power Requirements: 4.5 VDC to 5.5 VDC, 12mA Max. w/no ICC
ICC Interfaces (Compliance): ISO/IEC 7816-1, 2, 3, & 4
ICC Types: Number of cards = 1, Asynchronous, T=0 & T=1 Synchronous (memory) cards (contact factory)
ICC Transmission: 9.6 Kbps to 115 Kbps speeds
ICC Voltage: 5 V Interface: USB-HID, UART, RS-232
MTBF: 300,000 hours (calculated based on Bellcore standard).
Approvals
RoHS 2 & REACH
EMV Level 1 & Level 2
FCC/CE
6.
Hardware Layout
6.1.
Board Structure
Main PCA design
Page | 8
MiniSmart II User Manual
6.2.
Communication Interface
PCs and laptops can communicate with the MiniSmart II through the USB interface or the RS-
232 interface. An Android device uses USB and a PC might use either USB or RS-232.
6.3.
Connector Interface
7
8
5
6
2
3
4
6.3.1.
FPC Interface
FPC Header Spec: 8PIN, 1.0mm pitch, length 3.0mm, thickness 0.3mm
Pin out :
1 TXD
RXD
GND
USB_DP
USB_DM
GND
+5v
Earth_GND
Page | 9
MiniSmart II User Manual
6.3.2.
USB and no FPC
USB Connector: Molex; 53261-0471
USB Connector Specifications: 4PIN, 1.25mm pitch
Pin out :
1 +5V
2 USB_DM
3 USB_DP
4 GND
6.3.3.
RS-232 and no FPC
RS-232 connector: Cherng-Weei Technology Corp.; CCSH-W10R-05-TR
RS-232 connector spec: 5PIN, 1.0mm pitch
Page | 10
MiniSmart II User Manual
Pin out :
1
2
+5V
TXD
3
4
5
RXD
GND
Earth_GND
7.
Interfaces
7.1.
Smart Card Function
• EMV 2000 Level 1 & 2 compliant (EMV-ready).
• Reads ISO 7816 (1,2,3,4) (T=0, T=1) (Class A, B, C) microprocessor cards.
• Monitors card seated status.
• TDES and AES Enhanced Encryption Format supported.
7.2.
Serial Interface
• RS-232 interface for communication with PC host. (Can communicate with Android host via
MicroUSB.)
• Typical size for an EMV card transaction is 300 bytes per transaction.
• Bi-directional communication supported at 9600/19200/38400/115200 baud.
• The USB VID is 0x0ACD. USB PID is 0x3410.
7.3.
Key Injection Function
• Is compatible with FutureX HSM for Debit and Data Key Injection.
• Can communicate with HSM via RS-232 port.
• Check with an ID TECH representative for latest HSM compatibility list.
Page | 11
MiniSmart II User Manual
7.4.
Remote Key Injection Function
• Compatible with Local POS Computer (LPC) for Debit and Data Key Injection .
• Can communicate with Local POS Computer (LPC) via RS-232 port.
• Can communicate with Local POS Computer (LPC) via USB port.
7.5.
Bootloader Function
The firmware can be upgraded via RS-232 or USB port in the field. The unit does not need to be sent back to the manufacturer.
8.
APIs
8.1.
Set Idle Waiting Time
Command Body
78 53 01 05 01 <Time>
Where :
<Time> is 4 seconds ~ 60 seconds (Default is 4 seconds)
Response Body
06
Note: The "Set Idle Waiting Time" is only available in the FW version V2.00.034 and above.
8.2.
Get Idle Waiting Time
Command Body
78 52 01 05
Response Time
06 78 01 05 01 <Time>
Note :
• If waiting time is 0 and if interface is RS232, disable the device to work in Low Power
Consumption status.
• If the waiting time is not 0, the Idle status is more than <Time>, the interface is RS232, and the card is not seated, the device will enter Low Power Consumption status.
• If the device receives a command in Idle status the waiting time will be reset.
• If IC card is removed the waiting time will be reset.
Page | 12
MiniSmart II User Manual
9.
Universal SDK
ID TECH's Universal SDK supports MiniSmart II development in C# on Windows and Java on Android.
Contact an ID TECH representative for free access to the SDK of choice. ID TECH recommends the use of these SDKs to achieve rapid integration of MiniSmart II with tablets, POS systems, mobile devices, electronic cash registers, and more.
The Universal SDK is designed to provide easy high-level access to virtually all MiniSmart II functionalities while eliminating the need to use low-level firmware commands. The SDK's convenience objects, and rich APIs greatly facilitate exceptional processing, data parsing, and response-code interpretation. As a result, sophisticated integrations are achieved relatively quickly.
The Universal SDK comes with sample code and ample documentation. It also comes with a Universal
Demo or "UDemo" app (for Windows) that facilitates troubleshooting, terminal-configuration testing, and data validation. The UDemo app is available for download at ID TECH's public Knowledge Base .
10.
Abbreviations
AES Advanced Encryption Standard
DES Data Encryption Standard
EMV Europay, MasterCard, and Visa standard
FPC Flexible Printed Circuit (connection)
KEK Key-Encryption Key
MSR Magnetic Swipe Reader
MTBF Mean Time Between Failures
PCI Payment Card Industry
POS Point of Sale
SRED Secure Reading and Exchange of Data
TDES Triple Data Encryption Standard
USB Universal Serial Bus
Page | 13
advertisement
Related manuals
advertisement