advertisement
INTRODUCTION
Console
Safety key
Handle bar
Handle pulse
Up-right post
Motor cover
Side rail
Base frame
Main frame Running belt
END CAPS
Owner’s Manual 2
KEY FEATURES
Congratulations on choosing this treadmill.
You have taken the first step to a healthier and more rewarding lifestyle.
This treadmill is especially designed to give you reliable performance and enjoyable workout in the comforts of your home. Please find below the features and benefits of this treadmill.
◇
Incline can meet your different requirement, jogging, running, walking.
◇
Low impact design with cushions, and PU roller so that your joints are protected against possible injury.
◇
Foldable design for convenient storage.
◇
Mobility wheels for easy moving and relocation.
◇
Hand contact heart-rate system to monitor cardio performance.
◇
Emergency safety key for quick motor shut-off.
TECHNOLOGY DATA
Voltage
Max load
Production side
Running area
AC-220V 50/60Hz
110Kg folded: 1030*750*1460mm deploy: 1630*750*1280mm
1300*410mm
Speed 1.0
－
16.0Km/h
Incline 0-12%
Remark: Our company retain the priority of revision not to advise in advance
CAUTION:
Before beginning any exercise program always consult your physician. If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising and consult your physician before continuing.
Owner’s Manual 3
IMPORTANT SAFETY PRECAUTIONS
When using an electrical product, basic precautions should always be followed. Read all the instructions before using this treadmill.
GROUNDING INSTRUCTIONS
This product must be grounded! If treadmill should malfunction or breakdown, grounding provides a path of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. This plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
DANGER!
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
ELECTRICAL SAFETY
To reduce the risk of burns, fire, electrical shock, or injury to persons, take the following precautions.
When plugged in, do not leave the treadmill unattended at any time. Unplug the treadmill from the power source when it is not in use.
Do not use the treadmill if the unit is wet or the plug or cable is damaged or the treadmill is not working properly. Do not use damaged or defective equipment. Keep equipment out of use until unit is repaired by trained technician.
Keep the power cable and plug away from heated surfaces.
Never place the power cord under carpeting or place any object on top of the power cord.
Use only the power cord provided with this treadmill.
To disconnect, turn the switch to the off position, then remove the plug from the outlet.
WARNING!
Connect this unit to a properly grounded outlet only. Please using special circuit with special power supply, plug with power supply must be connected with earth.
Owner’s Manual 4
IMPORTANT SAFETY PRECAUTIONS
This exercise equipment is designed and built for optimum safety for the home use. However, certain precautions always apply whenever you operate any exercise equipment. Be sure to read the entire manual before assembly and operation of this machine. Also, please note the following safety precautions.
MECHANICAL SAFETY
Before you start to exercise, make sure the unit functions correctly. To maintain the safety level of the exercise equipment do not use a faulty device.
Replace defective components immediately and/or keep the equipment out of use until repair.
Inspect the equipment prior to exercising to ensure that all nuts and bolts are fully tightened before each use.
Do not use attachments not recommended by the manufacturer.
Never drop or insert any object into any opening.
Only one person may use the treadmill at a time.
Never activate the speed when someone else is standing on the treadmill.
The max load is 110kgs
APPROPRIATE ATTIRE
Always wear appropriate clothing. Do not wear clothing that might catch on any part of the treadmill.
Always wear non-slippery shoes during workout with the treadmill. Do not wear shoes with heels or leather soles. Check the soles of your shoes and remove any dirt and embedded stones.
CHILDREN AND PETS
Most exercise equipment is not recommended for small children. Children should not use the equipment unless they are under adult supervision. To ensure safety, keep young children off the treadmill at all times.
Exercise equipment has many moving parts. In the interest of safety, keep others (especially children and pets) at a safe distance while you exercise.
CAUTION!
Stop your workout immediately if you feel any pain or abnormal symptoms and consult your physician.
Read this manual before operating this treadmill.
Owner’s Manual 5
ASSEMBLY INSTRUCTIONS
Step 1: . Take the machine from the package, put on the level floor; please keep your hand from the connection between the console and the stand post, the stand post and the bottom frame.
Step 2: Follow the arrowhead to put on the stand post (please don’t put your hand on the connection), fix the stand post to the bottom frame with the 2pcs bolt M8*50 for each side. Please do not tight all the bolt.
Owner’s Manual 6
Step 3: Follow the arrowhead to put up the console (please don’t put your hand on the connection), fix the console to the stand post with the 2pcs washer Φ 8, and 2pcs bolt M8*20. Please tight all the bolt.
Step 4: Follow the arrowhead put the plastic cover on the bottom frame, Fix the bottom cover with two bolt
(ST4*20) each side, then put the casket on the console.
Owner’s Manual 7
SETTING UP YOUR TREADMILL
PLACEMENT IN YOUR HOME
To make exercise a desirable daily activity for you, the treadmill should be placed in a comfortable and convenient setting. This treadmill is designed to use minimal floor space and to go nicely in your home.
z Do not place the treadmill outdoors. z Do not place the treadmill near water or in high moisture content environment. z Make sure power cord is not in the path of heavy traffic. z If your room is carpeted, check the clearance to make sure there is enough space between the carpet fiber and the treadmill deck. If you are uncertain, it is best to place a mat beneath your treadmill. z Locate the treadmill at least 4 feet from walls or furniture. z Allow a safety area of 2m X 1m behind the treadmill so that you can easily get on and off the treadmill without getting trapped during an emergency.
Occasionally after extended use you will find a fine black dust below your treadmill. This is normal wear and
DOES NOT mean there is anything wrong with your treadmill. This dust can be easily removed with a vacuum cleaner. If you wish to prevent this dust from getting on your floor or carpet, place a mat beneath your treadmill.
USE DEDICATED CIRCUIT
The outlet selected should be a dedicated circuit. It is particularly important that No sensitive electrical equipment, such as computer or TV, share the same circuit.
CAUTION!
Make sure the running deck is level to the ground. If the deck is positioned on uneven surface, it would cause premature damage to the electronic system.
Read this manual before operating this treadmill.
Owner’s Manual 8
GETTING STARTED
TURN POWER ON
The On/Off switch for the treadmill is located next to the power supply cord at the back of the motor cover. Flip this switch to the “ON” position.
SAFETY TETHER KEY AND CLIP
The safety key is designed to cut the main power to the treadmill should your fall. Therefore, the safety key is designed to bring the treadmill to an immediate stop. At high speeds, it may be uncomfortable and somewhat dangerous to come to a complete stop immediately. So, use the safety key as emergency top only. To bring the treadmill to a complete stop safely and comfortably, use the red stop button.
Your treadmill will not start unless the safety key is properly inserted into the key holder in the middle of the console. The other end of the safety key should be securely clipped to your clothing so that in the case that you fall, you will pull the safety key from the console, which will stop the treadmill immediately to minimize injury.
For your safety, never use the treadmill without securing the safety key clipped to your clothing. Pull on the safety key clip to make turn it will not come off your clothing.
GETTING ON AND OFF THE TREADMILL
Handle with care when getting on or off the treadmill. Try to use the handlebars while getting on or off. While you are preparing to use the treadmill, do not stand on the running belt. Straddle the running belt by placing your feet on both side rails of the treadmill deck. Place your foot on the belt only after the belt has begun to move at a consistent slow speed.
During exercise, keep your body and head facing forward at all times. Never attempt to turn around on the treadmill when the running belt is still moving. When you have finished exercising, stop the treadmill by pressing the red stop button. Wait until the treadmill comes to a complete stop before attempting to get off the treadmill.
WARNING!
Never use this treadmill without first securing the safety tether clip to our clothing.
CAUTION!
For your safety, step onto the belt when the speed is no more than 3km/h.
Owner’s Manual 9
FOLDING THE TREADMILL
HANDLING YOUR TREADMILL
1. Restore incline to flat (0) position
2. Unplug from power point before folding
3. Lift deck until it's parallel to the upright post and cylinder locks into position
4. Caution: check to ensure cylinder locking device has engaged
UNFOLDING THE TREADMILL
1. Place one hand on handle bar, use the other to push top of the running deck forward
2. Press one foot on the middle section of the cylinder to dis-engage the locking mechanism
3. Allow deck to begin slowly dropping before releasing hands
MOVING THE TREADMILL
The treadmill can be moved around in house safely in its fold-up position by using the transport wheels
Firmly hold onto handle bars with both hands, pull the treadmill towards you, incline 30-40 degree until it's portable on wheels, drag or push slowly
Feet pad welding cylinder
Owner’s Manual 10
OPERATING THE CONSOLE
Ⅰ ﹕
Window and key-press instruction
1,4 Display windows
：
A: upper Display window: racetrack and program chart
B: left Display window: speed and program data
C: right Display window: Pulse and Incline data.
D: middle Display window: Time and Distance, Calories
When the console showing the data that the LED light will shine
2, function key
A: “program” key
： when the machine stops, press the “program” key can enter the circle choosing program: manual mode P0->P01->P02->P03->P04->P05->P06->P07->P08->P09->P10->P11->P12
-> test body fat
。
B: mode: 1. Under it running, press the “mode” key can enter the cycle choosing distance
－ time
－ calorie
－ scan in 6 seconds; 2. Under it stopping, it is a setting mode key: during the P0 program, cycle choose the time
Owner’s Manual
count down
－ distance count down
－ calorie count down, the 3 running mode and time running mode; During
P1-P12 program, It is time count down default
（
30 minutes
） reposition key; During FAT program, choose the body fat testing item serial number
：
F1
、
F2
、
F3
、
F4
、
F5
；
C
：
“start ”key
：
when press this key
， buzzer will sound, Put “start”, The window display 5---4---3---2---1
， then the motor start.
D
：
“stop” key: press this key the motor will stop working.
E : Speed +/-
， adjust the speed1-16KM.
F : Incline +/-
， adjust the incline’s paragraph 0-12%
G : Quick speed: 2,4,6,8,10,12,14,16km/h.
H : Quick incline: 2,4,6,8,10,12%
Ⅱ：
Program Instruction
：
1: A manual program including: normal mode, time countdown, distance countdown, calorie countdown mode
2
：
12 set programs
：
P1,P2,P3,P4,P5,P6,P7,P8,P9,P10,P11,P12
3.
：
A program of body fat function
Ⅲ ﹕
Start instructions
：
1
﹕
Put the safety key on computer board, open the power supply, all the functions of the window will show 2 seconds and the buzzer will give off a “beep” sound. Then enter into the normal manual modes.
2
﹕
Press “start” key, speed window show
：
5
－
4
－
3
－
2
－
1, start the motor once when the buzzer sound five times.
Owner’s Manual
Ⅳ ﹕
Handle mode
：
1
﹕
How to enter in manual program
：
A
：
Put through the switch., enter in the normal mode of manual program directly.
B
：
When stop, press the “program” key can enter into the normal mode of manual modes.
2
：
3 set functions of the handle functions
： 。
Time set, distance set and calorie set.
A: It shows the normal mode at first and all the parameters are original when starts to enter into the handle modes.
B: When at the normal manual modes, press the “mode” key enter into the time countdown modes, the time displays flashing 30:00, press “+” or “-” can set the time count down which can be designed in the range of the time is : 8:00-99:00.
C: In the mode of time countdown, press the “mode” key can enter the distance countdown mode
。
The original distance show 1.0 kilometer. press the “+”or “-” key could design moving distance, the designed range is
1.00-99.00 kilometers.
D: Press “mode” key could enter into calorie countdown mode, the original show of calorie is 50 therm, press
“+” or “-” can design the range of calorie: 20-990 term.
Owner’s Manual
Ⅴ
: Operation of manual mode
A: press the “start” key, count down the time 5 seconds, motor start moving, original speed is 1.0km/h.
B: Press “+”or “-”can adjust the speed.
C: press the “Stop” key, the speed will decrease till without moving.
D: Press the quick speed key, you can get your desired speed soon.
E: Put off the safety key to stop the motor moving, speed window show E07 or”---“, buzzer will give off sound bi-bi-bi(the data of other windows keep unchanged)
F: Under the time countdown mode, when the designed time descends to 0, the speed slows down and stop at last, the buzzer sound 15 times every one second. Press “start” key, the speed increase from 1.0km/h to the speed of the window display. The time displays not count down.
G: the distance countdown mode is the same as the above.
H: the calorie countdown mode is the same as the above.
I: The unset data adding .
J: Press the “Power supply” key, the treadmill can be opened and closed.
Ⅵ ﹕
Program mode
1: the original time is designed to 30 minutes. You can just set time between 5:00 to 99:00. Press “+” ”-“ can adjust the set parameter.
2: press “start” key, the motor start function according to the program.
3: Press “stop” key, the speed will slow down until the machine stops.
4. Press “+”or “-” can adjust the running speed.
5: press the quick speed key “2, 4, 6, 8, 10, 12, 14, 16.”can quickly enter your desired speed.
6. press the quick incline key ”2, 4, 6, 8, 10, 12” can quickly enter your desire speed.
7: the program can be divided into 16 parts, every part is 1/16 of the designed time.
8: the console sound 3 times during the transition of every part.
9: the designed time slow down to 0, the speed slow down to stop, the buzzer sound 15 times every one second, the middle window transfer to the fixed display time. Press “start” key, speed increase from 1.0km/h to
Owner’s Manual
the current speed of the window display.
10: Pull off the safety key can stop the motor peremptorily, the LCD window display E07 or”---“, the buzzer sound bi-bi-bi all the time.
11: Press the “Power supply” key, it can stop and open the treadmill.
Ⅶ ﹕
Safety key functions
1. Pull off the safety key, the LCD windows show
“↓”
,the buzzer sound “BIBI-BI” (the data of other windows keep unchanged).the motor stop moving.
Ⅷ ﹕
Body fat function:
1. When the treadmill stops, press the “Program” key to select the body fat function key and enter into body fat function.
2. The window “SPEED/PROGRAM” displays the set parameter, press “MODE” key to choose the item serial number; the window “ PULSE/INCLINE” displays the set item serial number ,press “
＋
”
、
“
－
”key to set the data.
3. After entering into this function, the “ PULSE/INCLINE” window displays F1, which shows you should input the gender “Male” or “Female”. Press the speed “+” ”-“ you can select the gender: 1(male), 2(female). If the speed window displays 1, which shows you select “Male”,
4. Press “Mode” key, the “ PULSE/INCLINE” window displays F2, it shows you enter into set age, 25 years old.
Press speed “+””-“ to adjust the age (the range is from 1-100)
5. Press “Mode” key, the “ PULSE/INCLINE” window displays F3, which shows you enter into set height “170” cm, Press speed “+””-“ to adjust the height (The set height can be from 100cm to 200 cm)
6. Press “Mode” key, the “ PULSE/INCLINE” window displays F4, which shows you enter into set weight
“70”kgs, press speed “+” ”-“ to adjust the weight (The set weight can be from 20 kgs to 150 kgs)
7. Press “Mode” key, the “ PULSE/INCLINE” window displays F5, which shows you have entered into body fat function, Please touch the handle pulse on the handle cover, the body fat window will display the fat parameters of the tester in 8 seconds.
8. According to the standard of Asian people, the fat low 18 shows you are tend to be thin; it is perfect when the
Owner’s Manual
fat is between 23 to 28. If between 23 to 28 it suggests you are a little fat. If exceeds 29, it means you should lose weight.
IX : The display range of numerical value original Designed original value
Time (minute : second)
Designed range Display range
0:00 30:00 8:00-99:00 speed(km/h) 0.0 1.0
－
16.0
1.00
－
99.00 0.0
－
99.99
Ⅹ
: Program speed diagram:
P1
SPEED 1.0 3.0 3.0 7.0 7.0 5.0 5.0 5.0 7.0 7.0 5.0 5.0 5.0 5.0 3.0 2.0
P2
SPEED 2.0 3.0 3.0 6.0 5.0 5.0 8.0 5.0 5.0 6.0 8.0 8.0 8.0 5.0 4.0 3.0
P3
SPEED 2.0 3.0 5.0 5.0 7.0 7.0 8.0 5.0 5.0 5.0 3.0 3.0 8.0 8.0 4.0 3.0
P4
SPEED 2.0 2.0 3.0 5.0 5.0 5.0 8.0 8.0 8.0 8.0 5.0 5.0 5.0 3.0 3.0 2.0
P5
SPEED 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
10.0
10.0
9.0 8.0 7.0 5.0 4.0 3.0
P6
SPEED 3.0 4.0 5.0 5.0 6.0 6.0 7.0 7.0 7.0 9.0 9.0 10.0 10.0 11.0
5.0 3.0
P7
SPEED 3.0 4.0 9.0 4.0 11.0 4.0 10.0
4.0 9.0 4.0 8.0 4.0 11.0 5.0 3.0 2.0
P8
SPEED 3.0 5.0 8.0 3.0 5.0 7.0 9.0 3.0 5.0 7.0 10.0 3.0 5.0 7.0 11.0
5.0
P9
SPEED 3.0 7.0 9.0 4.0 7.0 10.0
4.0 7.0 11.0
5.0 7.0 12.0 4.0 7.0 12.0
6.0
Owner’s Manual
P10
SPEED 3.0 6.0 6.0 9.0 10.0 6.0 6.0 6.0 11.0
3.0
P11
SPEED 4.0 5.0 7.0 9.0 10.0 11.0
9.0 6.0 8.0 9.0 10.0 11.0 9.0 6.0 5.0
P12
SPEED 4.0 6.0 10.0 10.0 7.0 10.0
10.0
10.0
7.0 7.0 10.0 10.0 10.0 10.0
6.0 5.0
TROUBLE SHOOTING
Problem
Treadmill does not work
Belt does not run properly
Possible cause a. no connect to power supply b. safety switch not insert c. cut off the signal circuit system d. treadmill is not switch on e. burnt fuse a. belt not adjusted b. belt too tight a. belt is too loose
Belt is slipping
B. propulsion belt is too loose
Corrective action
Plug into socket
Insert safety switch in monitor
Check control panel and signal cable
Switch on
Change fuse
Adjust belt by silicon
Adjust belt
Adjust
Adjust
A
、 no power supply or don’t open up
Turn on power or turn on the switch “ON” position.
The system can’t work B
、 safety key is not on the location
Put the safety key on its correct location
C
、 computer system open circuit
Check the system of input and output end the wire
A
、 the safety key drop off
Dress up the safety key new normal state
B
、 system abnormity
Ask the repair to treat with
A
、 key-press mangle
Change the key-press
Key-press can’t work
B
、 communicate cut down Change the communicate wire
E-01
A
、 the wire contact badness
Connect the wire again or change the wire
Owner’s Manual
E-02
E-03
E-05
E-06
E-07
E-09
B
、 computer is badness
Change the computer
C
、 controller is badness
Change the controller
The motor wire don’t contact well with
Check and connect again the control
A
、 the inductor fix incorrectness
Check and revise the position
B
、 the inductor is badness
Change the inductor
C
、 the inductor don’t connect well with Check and anew connect
D
、 control is badness
Chang the controller
A
、 motor was damage
Change the motor
B
、 overload
Dress up the safety key new the controller was damaged
Check the transformer, and change the transformer or change into 15V steady pressure IC
The computer didn’t check the signal
A
、 check the safety key if drop off
； from the safety key the computer was damaged.
B
、 check the safety key if can work or its
The control could not check the signal A
、
Check the VR wire and the connector, from incline motor VR change the incline motor;
Owner’s Manual
MAINTENANCE
CLEANING
Remove dust on the treadmill with vacuum or slightly damp cloth. Fold up the deck and clean the floor with vacuum periodically will help to prolong the treadmill product life.
Never use solvents on the deck or running belt. Use of solvents can reduce critical lubrication of the deck and belt.
LUBRICATING THE DECK
A well-lubricated deck will ensure high performance of your treadmill and reduce the level of normal war and tear to important components. This treadmill has been pre-lubed at the factory. However, for optimal performance, the running deck may require periodic lubrication. With average usage ( 30 minute workout session at 5-6km/h 3 times a week for two people) lubricate every four to six months. Your may adjust the timing of the lubrication based on the intensity of the treadmill use level.
To check the lubrication level, simply lift the running belt, and put your hand as far into the center of the belt as you can reach. If your hand shows signs of silicone, then it does not need additional lubrication. If the board feels dray and there is very little evidence of silicone on your hand, then additional lubrication should be added.
TO LUBRICATE THE DECK:
Stop running belt so that the seam is located on top and in the center of the deck.
Insert nozzle into spray head of lubricant can.
Lift running belt.
Position nozzle between the belt and the board approximately 200mm (8” ) from the front of the treadmill.
Apply the silicon from the front to the rear of the treadmill on each side of the treadmill. Try to reach the spray as far into the center of the running deck as possible. The spray time should be approximately four seconds for each side.
6. Spread the silicon by running the treadmill at 1 Km/H and step gently on the belt from left to right. Do that for a few minutes and allow the silicon to soak into the belt.
12
Owner’s Manual
CAUTION!
Over tightening of the belt will severely shorten the life of the belt and may cause further damage to other components.
NOTE:
A well lubricated deck will ensure longevity of your treadmill in addition to providing you with the optimal performance.
DANGER!
To reduce the risk of electrical shock, always unplug the treadmill from the electrical outlet immediately after use and before cleaning.
13
Owner’s Manual
ASSEMBLY PICTURE
Owner’s Manual 22
EXPLORDED PARTS FORM
2
3
4
5
ART
23
24
25
26
19
20
21
22
12
13
14
15
8
9
10
11
16
17
18
NAME
Main frame welding
Incline frame welding
Upright post welding
QUANTITY
1
1
1
2
Feet pad welding bar
1
1 board 1
Inner hex bolt M12* Φ 14*35*19 2
Inner hex bolt M10*60*20
Inner hex bolt M10*35*20
Inner hex bolt M8*50*20
Inner hex bolt M8*45*20
Inner hex bolt M8*40*20
Inner hex bolt M8*30*20
Inner hex bolt M8*10
Inner hex bolt M8*75
Inner hex bolt M8*30
Inner hex bolt M8*15
1
3
8
2
1
1
2
3
2
4
Outside hex bolt M8*50
Outside hex bolt M8*40
Cross bolt M8*25
Cross bolt M6*30
Cross bolt M6*8
Cross bolt M5*10
Cross bolt M4*10
Cross bolt ST5*15
8
4
4
6
1
1
2
4
27
28
29
30
31
32
Cross bolt ST4*30
Cross bolt ST4*15
Cross bolt ST4*10
Cross bolt ST5*15
Cross bolt ST4*15
Cross bolt ST3*08
4
44
8
2
4
2
3
4
35 Flat Φ 14 2
36 Flat Φ 10 3
37 Flat Φ 8 13
39 Flat Φ 4 4
Owner’s Manual 23
40
41
42
43
Power metallurgy cover
Power metallurgy cover
Plastic flat washer
Plastic flat washer
44 Spring
φ
φ
Φ
Φ
24*
17*
26*
25*
φ
φ
Φ
Φ
19* Φ 14*14*3 2
10*12 2
20*t5.0 2
18*t3.0 4
1
4
46 Motor cover (up) 1
2
2
1 49
50
51
Rear cover (left)
Rear cover (right)
Rear cover feet pad
1
2
2
2
56
57
58
59
60
61
Place with the computer (big)
Place with the computer (small)
Sundries frame (left)
Sundries frame (right)
Handle bar cover (up)
Handle bar cover (down ）
1
1
1
1
1
1
1
62
63
64
Ellipse round stuff
Base frame cover (left)
Base frame cover (right)
69 Motor
70 Cushion with seat
71 Cylinder
72 Taper feet pad
75 Foam
77 Controller
78 Transformer
80 Switch
81 Fuse seat with wire
82 MP3 connect wire
83 Inductor
2
1
1
2
1
1
1
1
2
1
4
1
1
2
1
1
1
1
1
1
1
1
Owner’s Manual 24
87
88
89
90
Power supply connect wire(red)
Power supply connect wire(black)
Speed wire and handle pulse wire set
Incline wire and handle pulse wire set
91 Power supply wire
92 Wire
93 Wire protect cover
Owner’s Manual 25
1
1
1
1
1
1
1
1
1
1
4
4
1
2
TERMS AND CONDITIONS
WARRANTY
This warranty is valid only in accordance with the conditions set forth below. Warranty applies only while the followings three conditions are met.
▪ It remains in the possession of the original purchaser and proof of purchase is demonstrated.
▪ It has not been subject to accident, misuse, abuse, improper service or unauthorized modifications.
▪ Claims are made within the 12 months manufacturer’s warranty period.
EXCLUSIONS AND LIMITATIONS
This warranty is for home use only. Under no circumstances is this treadmill warranted for semi-commercial or commercial use.
We warrant this product to be free from defects in material and workmanship.
This warranty is expressly limited to the replacement of a defective motor, electronic component, or defective part and is the sole remedy of the warranty. Labor for repair or replacement of defective parts is not covered by this warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance or installation of parts or accessories not originally intended or compatible with the treadmill sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion or neglect.
Manufacturer shall not be responsible for incidental or consequential damages.
WARRANTY REGISTRATION
The warranty registration must be completed in full. Send or fax this information along with a proof of purchase to your dealer to keep on file. Your dealer must have this information on file before a warranty claim can be processed.
WARRANTY REGISTRATION – Keep a copy for your records
Model #: Serial #:
Date of purchase: Your name:
Dealer name: Address:
Dealer address:
Owner’s Manual 26
advertisement
Related manuals
advertisement