- Computers & electronics
- Computer components
- System components
- Motherboards
- Norco
- MITX-6854
- User manual
advertisement
MITX-6854
Mini-ITX Industrial Motherboard
USER' Manual V1.1
MITX-6854
Mini-ITX Industrial Motherboard
USER' Manual V1.1
ShenZhen NORCO Intelligent Technology Co., Ltd.:0755-27331166
Beijing : 010-82671166
Shanghai : 021-61212088
Nanjing: 025-58015489
Chengdu : 028-85259319
Shenyang : 024-23960846
Xi’an : 029-88338386
Nanjing: 025-58015489
Wuhan : 027-87858983
Tianjin : 022-23727100
Singapore : 65-68530809
Netherlands : 31-040-2668554
Web : www.norco.cn
ShenZhen NORCO Intelligent Technology Co.,Ltd.
MITX-6854 Mini-ITX Industrial Motherboard
ShenZhen NORCO Intelligent Technology Co.,Ltd.
Place/Data: HONG KONG/2008
Trade Name : ShenZhen NORCO Intelligent Technology Co.,Ltd.
Model Name : MITX-6854
Responsible Party : ShenZhen NORCO Intelligent Technology Co.,Ltd.
Equipment Classification : FCC Class B Subassembly
Type of Product : Mini-ITX Industrial Motherboard
Manufacturer : ShenZhen NORCO Intelligent Technology Co.,Ltd.
Data: 2009
Copyright
With the exception of showing the accessories of product configuration, this manual do not create any commitment of our company. We retained the rights to change it without prior notice. We will not be responsible for any installation, the result of improper use of direct, indirect, intentional or unintentional damage or hidden dangers.
Before buying products, please learn about product performance from the seller to see if it is in line with your needs. NORCO is a registered trademark of Shenzhen NORCO Intelligent Technology CO.,Ltd. Other trademarks involved in this manual, their ownership are owned by its respective owners. The contents of this manual are protected by copyright law. All rights are strictly reserved. Any form of unauthorized reproduction including but not limited to carbon copy, facsimile transmission and electronic copy or email should be destroyed immediately.
Common Sense in Safety Application
1. Before using this product, be sure to read carefully this user’s manual;
2. Any plate cards not ready to be installed shall be kept in the anti-static protective bags;
3. Before taking out the plate cards from the anti-static protective bags, first place hands on the grounding metal object for a while (e.g. 10 seconds) so as to release static electricity in body and hands;
4. While fetching plate cards, you should wear static protective gloves and have the habit of contacting brims of them;
5. In order to prevent bodily electric shock or damage to products, first turn off the AC power or unplug the power cord out of power sockets while inserting main boards or plate cards or configuring again;
6. Before it is necessary to move plate cards or the unit, be sure to unplug the AC power cords out of the power sockets;
7. Be sure to unplug AC power cords when there is an increase/decrease in plate cards for this product;
8. Before you connect or unplug any equipment, be sure to determine whether all power cords are unplugged in advance;
9. To prevent any unnecessary injuries to products due to frequent power on/off to the products, after the unit is shut down, you must wait at least 30 seconds before you restart up the unit.
10: If anything unexpected exists during Equipment used, please contact the professionals.
Contents
Chapter1 General Information
............................................................................ 1
1.1 Introduction ................................................................................................................. 1
1.2 Specifications.............................................................................................................. 1
Chapter2 Installation Instructions
..................................................................... 4
2.1 Connector Locations and Dimensions ........................................................................ 4
2.2 Installation Steps......................................................................................................... 5
2.3 Installing SO-DIMM..................................................................................................... 6
2.4 Setting Jumpers.......................................................................................................... 6
2.4.1 Clear CMOS (JCC) .................................................................................................. 6
2.4.2 COM2 setting ( J5 , J6 , J7 ) ................................................................................. 8
2.4.3 CF Card Master/Slave Selection ( JCF ) ................................................................ 9
2.4.4 LCD Power Selection ( J8 ) .................................................................................. 10
2.5 External Connector ................................................................................................... 11
2.5.1 IDE Connector ( IDE1 ) ........................................................................................ 11
2.5.2 SATA Connector&SATA Power Connector ( SATA0 , SATA1 , S_PWR ) ............ 12
2.5.3 CF Card Socket ( Compact Flash ) ...................................................................... 13
2.5.4 Parallel Por ( LPT ) .............................................................................................. 13
2.5.5 Serial Port ( COM1,COM2,COM3-6,COM7-10 ) .................................................. 14
2.5.7 LVDS PANEL BACKLIGHT ( J9 ) ......................................................................... 20
2.5.8 USB&Ethernet ( USB_RJ,USB_12,USB_34,USB_56 ) ....................................... 20
2.5.9 Keyboard/Mouse connector ( PS/2 ) .................................................................... 22
2.5.10 IRDA interface ( IRDA ) ...................................................................................... 23
2.5.11 GPIO ( J10 ) ....................................................................................................... 24
2.5.12 Power Connectors (ATX , DC_JACK) ................................................................. 25
2.5.13 CPUFAN connector ( CPUFAN ) ........................................................................ 26
2.5.14 Audio (JACK_HDA).............................................................................................. 27
2.5.15 Front Panel connector ( J4 ) .............................................................................. 29
2.5.16 RAM Slot ( SODIMM ) ........................................................................................ 31
2.5.17 PCI Slot ( PCI ) .................................................................................................. 32
2.5.18 Mini PCIE ( MINI_PCIE,W_LED ) ...................................................................... 33
Chapter3 BIOS Setup
............................................................................................... 34
3.1 Standard CMOS Setup ............................................................................................. 35
3.2 Advanced BIOS Features ......................................................................................... 38
3.2.1 CPU Feature.......................................................................................................... 38
3.2.2 Removable Device Priority .................................................................................... 40
3.2.3 Hard Disk Boot Priority .......................................................................................... 40
3.2.4 CD-ROM Boot Priority ........................................................................................... 41
3.3 Advanced Chipset Features...................................................................................... 44
3.4 Integrated peripherals............................................................................................... 47
3.4.1 OnChip IDE Device................................................................................................ 48
3.4.2 Onboard Device..................................................................................................... 49
3.4.3 Super IO Device .................................................................................................... 50
3.4.4 F81216D[COM3-COM10] ...................................................................................... 53
3.4.5 USB Device Setting ............................................................................................... 55
3.5 Power Management Setup ....................................................................................... 56
3.6 PnP/PCI Configurations............................................................................................ 59
3.7 PC Health Status ...................................................................................................... 60
3.8 Frequency/Voltage Control ....................................................................................... 62
3.9 Load Fail-Safe Defaults ............................................................................................ 62
3.10 Load Optimized Defaults ........................................................................................ 63
3.11 Set Supervisor Password........................................................................................ 64
3.12 Set User Password ................................................................................................. 64
3.13 ave&Exit Setup ....................................................................................................... 65
3.14 Exit Without Saving................................................................................................. 65
Appendix
........................................................................................................................... 67
Appendix 1: Driver Installation ........................................................................................ 67
Appendix 2 : Watchdog programmer guide.................................................................... 68
Appendix3 : GPIO Instruction......................................................................................... 70
Appendix 4: Glossary...................................................................................................... 71
Packing List
Thank you very much for choosing our products. Please check your package completely as the following item checklist first, if you find any components lost or damaged, please contact your retailer.
■ MITX-6854 motherboard 1pcs
■ NORCO-4134 PCI convert Card ( Optional )
■ User’s Manual
1 pcs
1 pcs
1 pcs ■ Drive Disk
■ SATA Data Cable
■ SATA HD Power Cable (optional)
1 pcs
1 pcs
■ IDE Data Cable
■ Serial port convert cable ( 2x20Pin convert 4 DB9 )
1 pcs
2 pcs
■ LPT convert cable
■ USB convert cable
1 pcs
1 pcs
■ Jumpers 4 pcs
Chapter 1
General Information
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Chapter1 General Information
1.1 Introduction
MITX-6854 is fanless Mini-ITX motherboard based on Intel 945GSE+ICH7M chipset with integrated Intel Atom N270 1.6GHZ CPU(FSB 533MHz and L2 Cache 512KB).MITX-6854 has
One 200 pin SO-DIMM DDRII 400/533MHz socket support system memory max. upto
2GB.With integrated graphic controller in northbridge, MITX-6854 is also provide
VGA/DVI/LVDS display and Dual-Independent-Display(VGA+DVI or VGA+LVDS).MITX-6854 provides one IDE, two SATAII, eight USB2.0, ten COM and one GbE (PCI-E). Additionally, one
PCI and one mini-PCIE are also provided for the system flexibility.
MITX-6854 is an integrated powerful computing platform with standard digital input/out ports 、 IrDA , Watchdog Timer. It is specially suitable for POS 、 kiosk 、 ATM and Rail
Transportation applications.
1.2 Specifications
Configuration Standard
● Low consume Mini-ITX Standard motherboard
Dimensions
● 170mm X 170mm ( L×W )
Processor
● Onboard Intel Atom N270 1.6G processor , L2 for 512KB,Power consumption is only
2.5W.Support FSB for 533MHz
● Support EM64T
Chipset
● North Bridge : Intel ® 945GSE ( TDP 5.5~6W )
● South Bridge : Intel
®
ICH7M
Display
● Chipset : Intel®945GSE Graphics Memory Controller Hub (GMA950)
● VGA : 1x DB15 port , support uXGA and resolution up to 2048x1536
1
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
● DVI(Optional) : SDVO signal convert DVI signal , Support resolution up to 1600x1200(DVI and LVDS combination not included) ,
● LVDS(Optional) : ,
GPIO Brightness control , Backlight power control.(DVI and LVDS combination not included)
● Dual Independent Display : VGA+LVDS/VGA+DVI can support dual independent display (DVI and LVDS combination not included)
System Mermory
● 1x 200Pin dual channels SODIMM Memory socket
● Support DDR Ⅱ 400/533MHz memory Up to 2GB
Storage
● 2x Serial ATA Ⅱ Ports, The transfer speed is up to 300MB/s
● 1x IDE Port , Support PIO 、 Bus Master 、 Ultra DMA33/66/100 mode , The transfer speed is up to 100MB/s
● Compact Flash : 50Pin Socket ( Support DMA Mode ), Share IDE channels
LAN
● Chipset: REALTEK 8111C
● Speed: 10/100/1000Mbps
● Interface:1x RJ45 Port
Audio
● Chipset: ALC888
● Audio Controller: Supports AC97 Audio stereo sound
● Audio Interface:Line-out , MIC-IN
USB Port
● 8x USB2.0 ports , The transfer speed is up to 480Mb/s
● Back panel double USB ports
● 3 group 2x5Header ports , can convert to 6x stanard USB ports
2
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
I/0 Functions
● Use Winbond W83627HF I/O chip
● Support 10x Serial Ports , COM1 、 COM2(by I/O chipshet) double deck DB9 ports , COM1 support RS232 , COM2 support RS232\422\485 ; Through the LPC bus Extended
COM3-COM10 (by F81216 chipshet),support RS232 。
● Provides one 2x10Pin parallel Port, Support SPP/EPP/ECP mode
● standard PS/2 keyboard and mouse port
● 1x IrDA Port
● Programmable input/output interfaces
Expansion Interfaces
● 1x PCI Slot
● 1x Miini-PCIE Slot
Power support
● Single power input (+12V)/ Standard ATX PowerSupply
Watchdog
● Support H/W reset function
BIOS
● 8MB SPI Flash BIOS
● Support ACPI Power manage
Environmental
● Operate Temp : 0-60 ℃
● Storage Temp.
: -40-85 ℃
● Operating Humidity: : 5%-95%
3
Chapter 2
Installation Instructions
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Chapter2 Installation Instructions
2.1 Connector Locations and Dimensions
The following picture is interface index for MITX-6854, when you install your devices, please consult it and read the following guide. During installation please care: for some devices, if incorrectly install, it will not work normally.
Note : During installation, in order to protect the part of board, please put on antistatic gloves 。
MITX-6854 Connectors Locations
4
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
MITX-6854 Dimensions
2.2 Installation Steps
Please refer to the following steps to install your computer:
1. Adjust all Jumpers on the MITX-6854 per this manual.
2. Installing system memory
3. Installing Expansion card
4. Connect all of the signal line, cable, panel-control circuitry and power supply
5. Finish BIOS setup
Note :
Key components of this motherboard are Integrated circuit, and these components will be easily damaged by electrostatic influence. So, before installing motherboard, you should always follow the following precautions:
1. Disconnect your Computer from the power supply before handling it.
2. Hold side by the edges; don't touch any component or pins on the board
5
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3. Use a grounded wrist strap while getting in touch with integrated circuit component (like as CPU, RAM).
4. Place components on a grounded antistatic bag that came with the Single Board
Computer, when these components are separated from the system.
2.3 Installing SO-DIMM
The procedures for installing SODIMM are described below. Please follow these steps carefully. You can install SDRAM memory modules using 200-pin SODIMM (Small Outline Dual
In-line Memory Modules).
1 : Ensure that all power supplies to the system are switched off.
2 : Tilt the SODIMM card approximately 25° above the board, and move it in the direction of the housing card slot. Make sure that the key in the module and the key in the housing are aligned.
3 : Push the module into the socket until the module bottoms. There should be a slight insertion force to engage the module into the contacts.
2.4 Setting Jumpers
Note:
Jumpers are located on the motherboard, they represent clear CMOS jumper JCC etc. pin1 for all jumpers are located on the side with a thick white line refer to the motherboard’s silkscreen , jumpers with three pins will be shown as 1-2 to represent pin1&pin2 connected and
2-3 to represent pin2&pin3 connected.
2.4.1 Clear CMOS (JCC)
This jumper is used to erase CMOS data and reset system BIOS information.The procedure for clearing CMOS is:
1. Turn off the system.
2: Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for about
5~10 seconds, then move the cap back to pins 1-2.
3. Turn on the system. The BIOS is now reset to its default setting
6
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor setting
1-2
JCC
Clear CMOS(BIOS renew to initialization)
Do not clear CMOS when power switch on, or it harm to the motherboard.
7
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.4.2 COM2 setting ( J5 , J6 , J7 )
COM2 can be configured to operate in RS-232, RS-422, or RS-485 mode (RS232 for default.). This is done via J5 、 J6 and J7.
COM2 RS232 ( default )
J5 3-5 4-6
J6 3-5 4-6
COM2 RS422
J5 1-3 2-4
J6 1-3 2-4
COM2 RS485
J5 1-3 2-4
J6 1-3 2-4
8
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.4.3 CF Card Master/Slave Selection ( JCF )
This jumper for setting CF card as master or slave, close JCF jumper (plug JCF cover), CF card is set as master. When you need to set it as slave, open the cover please! Master for default.
Setting
Close
Open
JCF
Set CF card as master(default)
Set CF card as slaver
9
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.4.4 LCD Power Selection ( J8 )
Before use LCD device, please make sure the powersupply is adjusted accordingl , J8 is to adjust the powersupply of LVDS and TFT.
J8
Panel VCC Selection
1-2 5V
2-3 3.3V
10
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5 External Connector
Please carefully read this manual when connecting external connector, so as to avoid damage to the motherboard!
2.5.1 IDE Connector ( IDE1 )
This IDE connector is for 2 IDE devices. If you have two IDE hard disks in system, the second disk must be set as slave disk by jumper setting.
IDE :
Pin Name
DDP 7
DDP 6
DDP 5
DDP 4
DDP 3
DDP 2
DDP 1
Pin
11
13
15
7
9
3
5
12
14
16
4
6
8
10
Pin Name
DDP 8
DDP 9
DDP 10
DDP 11
DDP 12
DDP 13
DDP 14
11
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
DDP 0 17 18 DDP 15
IDE_PDDREQ# 21 22 GND
IDE_PDIOW 23 GND
IDE_PDIOR 25 GND
IDE_PIORDY 27 28 ALE
IDE_PDDACK# 29 30 GND
INT_RQR14 31 NC
IDE_PDCS1# 37 38 IDE_PDCS3
2.5.2 SATA Connector&SATA Power Connector ( SATA0 , SATA1 , S_PWR )
MITX-6854 supports Serial ATA via two connectors (SATA0, SATA1). Data transfer rates up to 300 MB/s, enabling very fast data and file transfer, and independent DMA ope ration on two ports.
12
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
SATA Port Pin define :
Pin Pin Name
1 GND
2 SATA_TXP
3 SATA_TXN
4 GND
5 SATA_RXN
6 SATA_RXP
7 GND
S_PWR ( SATA Power Connector ) :
Pin Pin Name
1 +12V
2 GND
3 VCC
4 GND
5 VCC3
2.5.3 CF Card Socket ( Compact Flash )
One standard 50pin Compact Flash Socket on board (Image Omitted).
Note : The CF card socket share channels with IDE. IDE channel support only two IDE devices, when Compact Flash card was install, only one IDE device can be connected.
2.5.4 Parallel Port ( LPT )
Normally, the parallel port is used to connect the card to a printer. The board includes a multi-mode (ECP/EPP/SPP) parallel port accessed via LPT and a 20-pin flat-cable connector.
You will need an adapter cable if you use a traditional DB-25 connector. The adapter cable has a 20-pin connector on one end, and a DB-25 connector on the other. The parallel port interrupt channel is designated to be IRQ7.You can select ECP/EPP DMA channel via BIOS setup.
13
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Pin Name
T_STB#
PDQ0
PDQ1
PDQ2
PDQ3
PDQ4
PDQ5
PDQ6
PDQ7
Pin Pin Name
1 2 T_AFD#
3 4 T_ERR#
5 6 T_INIT#
7 8 T_SLIN#
9 10 GND
11 12 GND
13 14 GND
15 16 T_BUSY
17 18 T_PE
T_ACK# 19 20 T_SLCT
2.5.5 Serial Port ( COM1,COM2,COM3-6,COM7-10 )
The board provides ten serial ports (COM1-COM10), you can open or close serial port in bios setting options. COM1~COM10 both support RS232, COM2 even support RS422 /485, you can select COM2 transmission mode by jumper setting, particular setting please consult
“2.4.2 COM2 RS-232/422/485 setting”.
14
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
COM1 :
Pin
1
Pin Name
DCD
Signel description
Data Carrier Detect
5 GND Ground
6 DSR Data Set Send
8 CTS Clear
When COM2 is set as RS232/RS422/RS485, pins define as following :
RS485 RS422 RS232 Pin RS232 RS422 RS485
DTR RX- NC
15
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
COM3-6 :
Pin Name
GND
HDCD#6
HRXD6
HTXD6
HDTR#6
GND
COM7-10 :
Pin name
HTXD4
HDTR#4
GND
HDCD#5
HRXD5
HTXD5
HDTR#5
HDCD#3
HRXD3
HTXD3
HDTR#3
GND
HDCD#4
HRXD4
HDCD#7
HRXD7
HTXD7
HDTR#7
Pin Pin Name
1 2 HDSR#3
3 4 HRTS#3
5 6 HCTS#3
7 8 HRI#3
9 10 GND
11 12 HDSR#4
13 14 HRTS#4
15 16 HCTS#4
17 18 HRI#4
19 20 GND
21 22 HDSR#5
23 24 HRTS#5
25 26 HCTS#5
27 28 HRI#5
29 30 GND
31 32 HDSR#3
33 34 HRTS#6
35 36 HCTS#6
37 38 HRI#6
39 40 GND
Pin
16
Pin name
1 2 HDSR#7
3 4 HRTS#7
5 6 HCTS#7
7 8 HRI#7
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
GND
HDCD#8
HRXD8
HTXD8
HDTR#8
GND
HDCD#9
HRXD9
HTXD9
HDTR#9
GND
HDCD#10
HRXD10
HTXD10
HDTR#10
GND
9 10 GND
11 12 HDSR#8
13 14 HRTS#8
15 16 HCTS#8
17 18 HRI#8
19 20 GND
21 22 HDSR#9
23 24 HRTS#9
25 26 HCTS#9
27 28 HRI#9
29 30 GND
31 32 HDSR#10
33 34 HRTS#10
35 36 HCTS#10
37 38 HRI#10
39 40 GND
17
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.6 Display interfaces ( VGA , DVI , LVDS )
This board provides two display ports, standard 15pin VGA can be connected with CRT devices directly, DVI or LVDS connector can be connected with LCD-compatible devices (DVI and LVDS combination not included).
VGA :
Pin Pin Name Pin Pin Name Pin Pin Name
1 RED 6 GND 11 NC
2 GREEN 7 GND 12 SDA
DVI ( Optional ):
Pin Name Pin Pin Name
18
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
SD-DDC 7 NC
LVDS ( Optional ):
Pin Name Pin Pin Name
19
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.7 LVDS PANEL BACKLIGHT ( J9 )
The LCD inverter is connected to J9 via a 5-pin connector to provide +5V/+12V power.
J9 :
Pin Pin Name
1 +12V
2 L_BKLTEN
3 GND
4 L_BKLTCTL
5 VCC
2.5.8 USB&Ethernet ( USB_RJ,USB_12,USB_34,USB_56 )
The board provides up to eight USB Ports,One RJ45 Ethernet interface.Thereinto
,
USB_RJ include 2x USB2.0 ports and 1x 10/100/1000Mb RJ45 Ethernet interface , The board
20
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor provides 3 group 2 x 5 pin header connectors (USB_12, USB_34, USB_56). You will need an adapter cable if you use a standard USB connector. The adapter cable has a 2 x 5-pin connector with protect function for plug in wrong direction on one end and a USB connector on the other. Two LEDs beside RJ-45, Ethernet LAN port LED status :
RJ45 PORT LED state description :
LILED state
Network link status
Green ( 100Mbps )
On
ACTLED(Yellow) state Message transfer status effective On transfering
Orang ( 1000Mbps )
Off No message transfering Off noneffective
Standard USB ports define :
Pin Pin Name
1 +5V
21
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
4 GND
USB1-6 ports define :
Pin Name Pin Pin Name
USB DATA- 3 4 GND
2.5.9 Keyboard/Mouse connector ( PS/2 )
Tow PS/2 ports for KB/MS: Green for Mouse and Purple for Keyboard.
Mouse:
Pin Pin Name
7 +5V
8 GND
9 NC
22
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
11 MS_CLK
12 NC
Keyboard :
Pin Pin Name
1 +5V
2 GND
3 NC
4 KB_DATA
5 KB_CLK
6 NC
2.5.10 IRDA interface ( IRDA )
This board provides a group of IrDA pins, supports IrDA version1.0 SIR or SHARP ASK-IR protocol infrared ray data transmission function.
Pin Pin Name
1 +5V
23
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2 NC
3 IRRX
4 GND
5 IRTX
2.5.11 GPIO ( J10 )
The board supports 24-bit GPIO through the GPIO connector. The 24 digital input/output can be programmed to read or control devices, with input or output defined. The default setting is 12 bits input and 12 bits output.
GPIO define :
Pin Name Pin Pin Name
24
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
ICH_GPIO33 17 18 ICH_GPIO24
ICH_GPIO34 19 20 ICH_GPIO25
ICH_GPIO35 21 22 ICH_GPIO26
ICH_GPIO38 23 24 ICH_GPIO27
2.5.12 Power Connectors (ATX , DC_JACK)
MITX-6854 provides two optional power supplies, but can't be used at the same time, users can choose on their own needs:
1 : ATX ( ATX ): ATX power supply
2 : Single power supply ( DC_JACK ) +12V input
ATX :
Pin Name Pin
25
Pin Name
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.13 CPUFAN connector ( CPUFAN )
This board provide a 3Pin CPU fan socket, attention :
(1) Electric current for fan ≤ 350mA (4.2W, 12V).
(2) Please ensure that the fan wire is consistent with the wire for this socket. The power cord must be in the middle position. In addition, ensure the GND cord wire (usually black) and fan rotation output pulse signal wire (in other color). It is recommended that the fan with rotary speed detection be used.
26
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Pin Pin Name
1 GND
2 +12V
2.5.14 Audio (JACK_HDA)
The onboard audio controller provides SPEAKER-OUT or MIC-IN function, and you can recognize them by location (The MIC-IN is the jack near PCB , and the SPEAKER-OUT is at the far end of PCB) or color (Red is MIC-IN, and green is SPEAKER-OUT)
.
27
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
28
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.15 Front Panel connector ( J4 )
J4 use to connect function button or LED on front panel.
Front Panel connector define :
Pin Name Pin Pin Name
HDD_LED+ 3 4 HDD_LED-
Particular connection as below, according to the table above, advert to their polarity ; When relevant polarity connected wrong, relevant function won’t work normally.
POWER LED
HD LED
RESET BUTTON
POWER BUTTON
29
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
1 ) System Power LED Pins (J4 pin1, pin2 for PWLED)
Connecting system power LED cable and these pins, (pin 1 is LED anode),when system power switch on, power LED on ; When system power switches off, power LED off.
2 ) HD LED Pins (J4 pin3,pin4 for HDD LED)
As a rule, there is a HD LED on the panel of chassis, while HD device (like hard Disk) is reading or writing (no matter which HD device), LED will flash, shows that IDE device is running.
Connect IDE LED on chassis panel and these pins (pin3 is LED anode).
3 ) Reset Button Pins(J4 pin7,pin8 for RESET )
Connect this pins and RESET switch on panel of chassis with cable. When system can not work on, reset can make system restart, without turning on/off the power, thereby it can prolong system serviceable life.
4 ) Power On/Off Control Pins (J4 pin9,pin10 for POWER BUTTON)
Connect these two pins with bounce switch on panel of chassis, can switch-on or switch-off power.
30
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.16 RAM Slot ( SODIMM )
MITX-6854 has One 200 Pin SO-DIMM DDRII 400/533MHz socket support system memory max. upto 2GB.
31
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.17 PCI Slot ( PCI ) slot.
This board provides one PCI slot , Optional PCI convert card can be extended to two PCI
32
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
2.5.18 Mini PCIE ( MINI_PCIE,W_LED )
The back device of motherboard provides a mini PCI slot (Image Omitted), the user can expand mini PCI according to own need. User can dispaly its status through caller identification when using Mini PCI card.
W_LED :
Pin Name Pin Pin Name
LED_WWAN# 1 2 VCC3.3SB
LED_WPAN# 3 4 VCC3.3SB
LED_WLAN# 5 6 VCC3.3SB
33
Chapter 3
BIOS Setup
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Chapter3 BIOS Setup
Award BIOS upgrade:
It is true that hardware and software are upgrading all the time. When your IPC can not support the newest processor (for example), you should upgrade the BIOS to try to keep up with the latest technology. Upgrading (or flashing) the BIOS is not an easy attempt. To make sure upgrade succeed, please follow the instruction below:
AWDFLASH.EXE is the program for BIOS to modify and upgrade , need to be run in DOS mode.
Use boot disk load DOS, run Amiflash.exe and write the newest file:XXXX.bin into the
Flash IC.
Order format: A:\ Awdflash XXXX.bin
If you need to add other parameters, please add <space>/? after the order format.
Example: Awdflash 6854I100.bin /P /B /C /N /X
Remarks:
1. Upgrading BISO may cause your system crash, so please operate carefully.
2. Please use the upgrading program in the CD-ROM provided by us
3. Please do not power off or reboot the system when upgrading, otherwise, the BIOS maybe be damaged.
4. Please backup your BIOS before upgrading
Award BIOS Description:
Awards BIOS ROM has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed memory (CMOS RAM) so that it retains the setup information when the power is turned off
Award BIOS Setup
Power on your computer, when this information display in your screen: Del->SETUP please press “DEL”, then it will enter BIOS setup interface.
1. Power on or Reset computer.
2. When "Press <Del> to enter setup" in screen, please press <Del>.
3. Use the “ ←↑→↓ ”to choose the option which your want to modify, press <Enter> and show
34
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor the sub-menu.
4. Use the “ ←↑→↓ ”and <Enter> to modify the value.
5. At any time, press<Esc> can back to the father-menu
Note: The default BIOS settings for this motherboard apply for most conditions to ensure optimum performance. If the system becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability 。 The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen 。
When the SETUP program starts, you can see the CMOS Setup Utility Main screens are as follows:
Award BIOS on the map is the main menu. Main Menu 12 set to provide the functions and two out of the way, the user needs according to their own set of corresponding projects. The following BIOS settings will be explained the various items.
3.1 Standard CMOS Setup
The CMOS RAM is powered by an onboard button cell battery. When you finish BIOS setup, the data in CMOS RAM will be automatically backed up to Flash ROM. If operation in harsh industrial environments causes a soft error, BIOS will recheck the data in CMOS RAM and automatically restore the original data in Flash ROM to CMOS RAM for booting.
Note: If you intend to change the CMOS setting without restoring the previous backup, you have to click on "DEL" within two seconds of the "CMOS checksum error..." display screen
35
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor message appearing. Then enter the "Setup" screen to modify the data. If the "CMOS checksum error"Message appears again and again, please check to see if you need to replace the battery in your system.
Date
Format: Day/Month/Date/Year ;< Day><Month><Date><Year> can be set by user.
Time
The times format in <hour> <minute> <second>, base on the 24-hour time
IDE Channel 0/1 Master/Slave
These 4 options are IDE HDD setting items. Important: Please select the right option for your IDE devices. Please make sure that the specifications of the IDE devices are comply with the content of the device list. If not: the device will be fail. In the main menu, we have another auto detection function item to facilitate the settings.If the HDD interface is SCSI, please select
Not Installed.
1. <LBA/Large>: HDD LBA/Large mode On/Off mode switch. Currently, HDD that size is bigger than 540MB should turn on this Option. But in some Novell Netware 3.xx or 4.xx etc version netbased OS need it be Off.
2. <Block Mode>: Turn this option to be On will help the R/W speed of HDD to be faster. But some of the old HDD don’t support this mode, and this option should be Off in this case.
36
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3. <PIO Mode>: Support PIO Mode0 ~ Mode5(DMA/33) 。 Use BIOS program to auto check the
HDD, this option of PIO mode will be set.
Important: If your system installed an IDE device (i.e. HDD, CD-ROM Driver), you should go to the BIOS setting, and let the system auto detect the device. If you are using swapable
HDD, you can change the type to Auto, or set the Primary and Secondary to Auto. Here,
Primary means the fist IDE interface: IDE0 on the motherboard; and Secondary means the second IDE device, and it refers to the IDE1 interface on the motherboard.
Every IDE device can have two IDE devices as Master/Slave.
Video
Select EGA or VGA display.option item : <EGA/VGA> , <CGA 40> , <CGA 80> , <MONO>.
Halt On
The item determines whether the computer will stop if an error is detected during power up.
<No Errors>: The system boot will not stop for any error.
<All Errors>: Whenever the BIOS detects a non-fatal error the system will be stopped
<All, But Keyboard>: The system boot will not stop for a keyboard error; it will stop for all other errors. (Default value)
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system.
Extended Memory
The BIOS POST will determine the amount of extended memory (above 1 MB in CPU’s memory address map) installed in the system.
Total Memory
This item displays the total system memory size.
37
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.2 Advanced BIOS Features
3.2.1 CPU Feature
Delay Prior to Thermal
When the temperature of CPU has reached the preset temperature by the factory, the clock of the motherboard will be delayed. The temperature device is activated, and the detector inside the CPU is also activated to maintain the limit of temperature of CPU. This can be set to
<4 Min> , <8 Min> , <16 Min> , <32 Min>.
Thermal Management
38
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Choice of thermal management monitor 。 option : <Thermal Management 1(default)> ,
<Thermal Management 2>.
TM2 Bus Ratio
Performance Management bus will be activated when the hard mode detector turn hot from cool. Min=0 Max= 255 Input DEC code = Option:<0X (Default)>.
TM2 Bus VID
Performance Management bus voltage will be activated when the hard mode detector turn hot from cool.Option
: <0.8375 V(Default)>,<0.8375-1.6000>.
Limit CPUID Maxval
Set CPU ID MaxVal, Max is 3. In WinXP, it is set as<Disabled> 。 Option : <Disabled
(Default)> , <Enabled>.
C1E Function
CPU C1E Funcion option. Option : <Auto (default)>.
Execute Disable Bit
Set if the CPU is protected by hardware antivirus Option : <Disabled> ,
Virtualization Technology
Set if use the additional hardware function provided by Vanderpool technology. Option :
<Disabled> , <Enabled(Default)>.
39
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.2.2 Removable Device Priority
The above-mentioned items are the order of boot devices, can not be amendment.
3.2.3 Hard Disk Boot Priority
The above-mentioned items are the order of boot devices, can not be amendment.
40
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.2.4 CD-ROM Boot Priority
The above-mentioned items are the order of boot devices, can not be amendment.
Virus Warning
If enabled, a warning message and alarm beep activates if someone attempts to write here.The commands are <Enabled> or <Disabled> .
CPU L1&2 Cache
This item allows the user to <Enabled (default)>/<Disable> CPU L1&L2 cache.
CPU L3 Cache
This item allows the user to <Enabled (default)>/<Disable> CPU L3 cache.
Hyper-Threading Technology
This item allows the user to Enabled/Disabled Hyper-threading support for the Intel ®
Pentium
®
4 processor with HT Technology. The Choices :< Enabled (default)>,<Disabled>.
Quick Power On Self Test
This option speeds up the Power-On Self Test (POST) conducted as soon as the computer is turned on. When enabled, BIOS shortens or skips some of the items during the test.
41
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
When disabled, the computer conducts normal POST procedures.
First/Second/Third Boot Device
The BIOS tries to load the OS with the devices in the sequence selected. Choices are:
<Floppy>, <LS/ZIP>, <HDD>, <SCSI>, <CDROM>, <LAN>, and <Disabled>.
Boot Other Device
If this option is set as [Enabled] , system can be booted from other devices if it is fail to boot from the first, second or third device. Options : <Disabled (Prohibited)> ; <Enabled (Default)>.
Boot Up NumLock Status
This item allows the user to activate the Number Lock key at system boot. The Choices :<
On (Default)>, <Off>
Gate A20 Option
<Normal>: A pin in keyboard controller controls GateA20
<Fast (Default)>: Chipset controls GateA20
The typematic rate is the rate key strokes repeat as determined by the keyboard controller.The commands are “Enabled” or “Disabled.” Enabling allows the typematic rate and delay to be selected.
Security Option
This field allows you to limit access to the System and Setup. The default value is
Setup.When you select System, the system prompts for the User Password every time you boot up.When you select Setup, the system always boots up and prompts for the Supervisor
Password only when the Setup utility is called up.
APIC Mode
APIC stands for Advanced Programmable Interrupt Controller.The default setting is
<Enabled>.
MPS Version Control For OS
This option specifies the MPS (Multiprocessor Specification) version for your operating
42
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor system. MPS version 1.4 added extended configuration tables to improve support for multiple
PCI bus configurations and improve future expandability. The default setting is< 1.4>.
OS Select For DRAM > 64MB
This option allows the system to access greater than 64MB of DRAM memory when used with OS/2 that depends on certain BIOS calls to access memory. The default setting is
<Non-OS/2>.
Report NO FDD For WIN95
If you are using Windows 95/98 without a floppy disk drive, select Enabled to release
IRQ6.This is required to pass Windows 95/98's SCT test. You should also disable the Onboard
FDC Controller in the Integrated Peripherals screen when there's no floppy drive in the system.
If you set this feature to Disabled, the BIOS will not report the missing floppy drive to Win95/98.
Full Screen LOGO Show
The splash screen can display the company LOGO.Option: <Enabled>,<Disabled>.
Small Logo(EPA) Show
The EPA logo appears at the right side of the monitor screen when the system is boot up.
The default setting is< Enabled>.
Summary Screen Show
This item allows you to open or close the screen shows a summary. Option: < Disabled
(default)> , <Enabled>.
43
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.3 Advanced Chipset Features
DRAM Timing Selectable
This option refers to the method by which the DRAM timing is selected. The default is <By
SPD>.
CAS Latency Time
You can configure CAS latency time in HCLKs as 2 or 2.5 or 3. The system board designer should set the values in this field, depending on the DRAM installed. Do not change the values in this field unless you change specifications of the installed DRAM or the installed CPU. The default is <Auto>.
DRMA RAS# to CAS# Delay
This option allows you to insert a delay between the RAS (Row Address Strobe) and CAS
(Column Address Strobe) signals. This delay occurs when the DRAM is written to, read from or refreshed. Reducing the delay improves the performance of the DRAM. The default is <Auto>.
DRAM RAS# Precharge
This option sets the number of cycles required for the RAS to accumulate its charge before the DRAM refreshes. The default setting for the Active to Precharge Delay is <3>.
Precharge dealy (tRAS)
44
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
This item allows user to adjust memory precharge time. The choices : [4] , [5] , [6] , [7] ,
[8] , [9] , [10] , [Auto] 。
System Memory Frequency
This item allows user to adjust memory frequency to improvement performance.
SLP_S4# Assertion Width
This item allow user to set the SLP_S4# Assertion Width 。 The choices : <4---5
Sec(default)> , <3 to 4 Sec> , <2 to 3 Sec> , <1 to 2Sec>.
System BIOS Cacheable
The setting of Enabled allows caching of the system BIOS ROM at F0000h- FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result.
Video BIOS Cacheable
The Setting Enabled allows caching of the video BIOS ROM at C0000h-C7FFFh, resulting in better video performance. However, if any program writes to this memory area, a system error may result.
Memory Hole At 15M-16M
In order to improve performance, certain space in memory can be reserved for ISA cards.This memory must be mapped into the memory space below 16 MB. The choices are
<Enabled> and <Disabled>.
45
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
PCI Express Root Port Func
PCI Express port 1-6
Set whether use PCI-E 1-6 port. The choices:<Auto(default)> , <Disabled> , <Enabled>.
PCI-E Compliancy Mode
This option allows you to choose the PCI-E Compliancy Mode. The choices : <v1.0a
(default)> , <v1.0>.
VGA Setting
On-Chip Frame Buffer Size
This item allows the user to adjust on-chip graphics of memory buffer. The choices :
<1MB> , <8MB(default)>.
DVMT Mode
This item allows the user to adjust Intel's Dynamic Video Memory Technology
(DVMT).Bios provides three options to choose (DVMT, FIXED and Both).
DVMT/FIXED Memory Size
This item allows the user to adjust DVMT/FIXED graphics memory size.
Boot Display
46
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
This item allows the user to decide that display mode.
Panel Scaling
Set Panel Scaling function. The choices:<Auto ( default ) >,<On>,<Of>.
Panel Number
These fields allow you to select the LCD Panel type. The setting values for these ports are:
<1024 x 768>,<1280 x 1024 >,<1400 x 1050>,<1600 x 1200 >.
3.4 Integrated peripherals
47
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.4.1 OnChip IDE Device
IDE HDD Block Mode
You can enable the Primary IDE channel and/or the Secondary IDE channel. Any channel not enabled is disabled. This field is for systems with only SCSI drives.
IDE DMA transfer access
DMA transfer access , The choices: <Disabled> , <Enabled(default)>.
On-Chip Primary/Secondary PCI IDE
Some UDMA cables use a hole in the ribbon cable as a cable detect mechanism to determine if a UDMA IDE or standard IDE cable is installed. The default setting is <Enabled>.
IDE Primary/Secondary Master/Slave PIO
Four IDE PIO ( Programable Input and Output ) options can allow you toassign PIO mode(1-4) for each IDE device.Mode 0 to 4 provides the increasing performance. In Auto mode, the system will auto detect the best working mode. The choices: <Auto> , <Mode 0> ,
<Mode 1> , <Mode 2> , <Mode 3> , <Mode 4>.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33/66/100 can be used when your IDE HDD support this kind of function. In the meantime, the OS includes a DMA driver ( Windows 95 OSR2 or third-party IDE BUS control
48
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor and driving programe ) If your HDD and your OS can support Ultra DMA/33 , Ultra DMA/66 or
Ultra DMA/100 , Select Auto to enable BIOS support. Options: [Auto] , [Disabled] 。
On-Chip Serial ATA Setting
On-Chip Serial ATA
This can be set to [Disabled : SATA Prohibited], [Auto : Detect SATA device by BIOS],
[Combined Mode : Simulate the IDE setting], [Enhanced Mode : Allow to use all IDE and SATA connection interface], [SATA Only : use SATA only] 。
SATA PORT Speed Setting
This option is used to set the speed of SATA ports 。 The choices : <Disabled>,<Force
GED >, <Force GED >.
PATA IDE Mode
Select this option to set the mode of the parallel IDE interface 。 Default setting for
[Secondary].
3.4.2 Onboard Device
HD Audio Seclect
Select <Disabled> if you do not want to use AC-97 audio/Modem. The choices: <Auto
(default)>, <Disabled>.
49
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.4.3 Super IO Device
KBC input clock
Select KBC ( KeyBroad Control ) ’s clock. The faster the clock, thefaster the speed:
The choices : <8MHz> , <12MHz> , <16MHz> 。
POWER ON Function
Select the method to start the computer. Button only is use the power button to control. Keyboard 98 isuse some special power switch. Hotkey is use shortcut of
Ctrl+F11 or ALT+F12. If the keyboard is too old, the boot of the computer may fail.
Mouse Left and Mouse Right is use mouse to start the computer, some PS/2 mice probably don’t support this option. The choices : <Button Only> , <Keyboard 98> , <Hot
Key> , <Mouse Left> , <Mouse Right>.
KB Power ON Password
If this is setted as <Password> in POWER ON Function , you can use this to set the password for the booting of PS2 mouse
Hot Key Power ON
If this is setted as <HotKey> in POWER ON Function , you can use this to set the hot key for PS/2 keyboard, options are from CtrlF1 to CtrlF12.
50
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Onboard Serial Port 1/2
For settings reference the Appendix for the serial resource allocation, and Disabled for the onboard serial connector. The choices : [Auto] , [3F8/IRQ4] , [2F8/IRQ3] , [3E8/COM4] ,
[2E8/COM3] , [Disabled].
UART Mode Select
This item allows you to select UART mode. The choices : < IrDA>, <ASKIR>, <Normal>.
RxD,TxD Active
This item allows you to determine the active of RxD, TxD. The Choices: <Hi, Hi,> ,<Lo,
Lo,> ,<Lo,Hi,>, <Hi, Lo.>.
IR Transmission Delay
This item allows you to enable/disable IR transmission delay. The choices:<Enabled>,
<Disabled>.
UR2 Duplex Mode
This item allows you to select the IR half/full duplex function. The choices:<Half>,<Full>.
Use IR Pins
Please refer to your IR equipment, setting the correct signal TxD and RxD 。 Option :
<RxD2> , <TxD2> , <IR-Rx2Tx2>.
IR Transmission Delay
This item allows you to enable/disable IR transmission delay. The choices:<Enabled>,
<Disabled>.
Onboard Parallel Port
This field sets the address of the on-board parallel port connector. You can select either
3BCH/IRQ7, 378H/IRQ7, 278H/IRQ5 or Disabled. If you install an I/O card with a parallel port, make sure there is no conflict in the address assignments. The CPU card can support up to three parallel ports, as long as there are no conflicts for each port.
51
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Parallel Port Mode
This field allows you to set the operation mode of the parallel port. The setting
“Normal”allows normal speed operation, but in one direction only. “EPP” allows bi-directional parallel port operation at maximum speed. “ECP” allows the parallel port to operate in bi-directional mode and at a speed faster than the maximum data transfer rate. “ECP + EPP” allows normal speed operation in a two-way mode.
EPP Mode Select
This field allows you to select EPP port type 1.7 or 1.9. The choices: <EPP1.7>, <1.9>.
ECP Mode Use DMA
This selection is available only if you select “ECP” or “ECP + EPP” in the Parallel Port
Mode field. In ECP Mode Use DMA, you can select DMA channel 1, DMA channel 3, or
Disable.Leave this field on the default setting.
PWRON After PWR-Fail
Use this to set up the system after power failure. The “Off” setting keeps the system powered off after power failure, the “On” setting boots up the system after failure, and the
“Former-Sts” returns the system to the status before power failure. Default setting :<on>.
52
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.4.4 F81216D[COM3-COM10]
Onboard Serial Port 3
This option for configure I/O address of serial port3(COM3).The choices: <200> , <208> ,
<210> , <218> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 3 Use IRQ
This option for configure IRQ of serial port3(COM3) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
Onboard Serial Port 4
This option for configure I/O address of serial port4(COM4).The choices: <200> , <208> ,
<210> , <218> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 4 Use IRQ
This option for configure IRQ of serial port4(COM4) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
Onboard Serial Port 5
This option for configure I/O address of serial port5(COM5).The choices: <200> , <208> ,
53
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
<210> , <218> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 5 Use IRQ
This option for configure IRQ of serial port5(COM5) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
Onboard Serial Port 6
This option for configure I/O address of serial port6(COM6).The choices: <200> , <208> ,
<210> , <218> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 6 Use IRQ
This option for configure IRQ of serial port6(COM6) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
Onboard Serial Port 7
This option for configure I/O address of serial port7(COM7).The choices: <220> , <228> ,
<230> , <238> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 7 Use IRQ
This option for configure IRQ of serial port7(COM7) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
Onboard Serial Port 8
This option for configure I/O address of serial port8(COM8).The choices: <220> , <228> ,
<230> , <238> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 8 Use IRQ
This option for configure IRQ of serial port8(COM8) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
54
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Onboard Serial Port 9
This option for configure I/O address of serial port9(COM9).The choices: <220> , <228> ,
<230> , <238> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 9 Use IRQ
This option for configure IRQ of serial port9(COM9) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
Onboard Serial Port 10
This option for configure I/O address of serial port10(COM10).The choices: <220> , ,
<230> , <238> , <Disabled>. When using multiple serial ports, the same I / O port address can not be used.
Serial Port 10 Use IRQ
This option for configure IRQ of serial port10(COM10) , The choices : <IRQ3> , <IRQ4> ,
<IRQ5> , <IRQ9> , <IRQ10> , <IRQ11>.
3.4.5 USB Device Setting
USB 1.0 Controller
Select Enabled, if your system contains a Universal Serial Bus (USB) controller and you
55
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor have USB peripherals. The choices are <Enabled> and <Disabled>.
USB 2.0 Controller
This entry is used to disable/enable the USB 2.0 controller only. The BIOS itself may or may not have high-speed USB support. If the BIOS has high speed USB support built in, the support will automatically turn on when a high speed device is attached. The choices are
<Enabled> or <Disabled>.
USB Operation Mode
Set the USB 2.0 controller to< Hi Speed (480 Mbps)> or <Full Speed (12 Mbps)>.
USB Keyboard/Mouse Function
Select .Enabled. if you plan to use a USB keyboard/Mouse. The choices are<Enabled>and
<Disabled>.
USB Storage Function
Select <Enabled> if you plan to use an external USB storage device to boot system under
DOS mode. The choices are <Enabled> and <Disabled>.
3.5 Power Management Setup
ACPI Function
56
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
This is item to activate the ACPI function. If you OS support ACPI-aware , For example:
Windows 98SE/2000/ME , choice <Enabled>.Option
: <Enabled> , <Disabled>.
ACPI Suspend Type
This item allows user to select sleep state when in suspend.
<S1 (POS)>: The suspend mode is equivalent to a software power down;
<S3 (STR) (default)>: The system shuts down with the exception of a refresh current to the system memory.
Power Management
This category allows you to select the type (or degree) of power saving and is directly related to the following modes:
1. HDD Power Down
2. Suspend Mode
There are four selections for Power Management, three of which have fixed mode settings
<User Define(default)> : Allows you to set each mode individually.When not disabled,each of the ranges are from 1 min.to1 hour.except for HDD Power Down which ranges from 1 min.to 15 min.and disable
<Min Saving> : Minimum power management , Suspend Time Out = 1 Hour , HDDPower Down
= 15 Min
<Max Saving> : Maximum power management , Suspend Time Out = 1 Min , HDDPower Down
= 1Min
Video Off Method
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank: This option will cause system to turn off vertical and horizontal synchronization ports and write blanks to the video buffer.
<Blank Screen>: This option only writes blanks to the video buffer.
<DPMS(default)> :Initial display power management signaling.
Video Off In Suspend
This item allows users to turn off video when system is in suspend mode.
。 option item :
<No>,<Yes(default)>.
57
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Suspend Type
This item allows users to determine the suspend type.
。 option item : <Stop
Grant(default)>,<PwrOn Suspend>.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.The choices: <3(default)>, <4>,
<5>, <7>, <9>, <10>, <11>, <NA>.
Soft-Off by PER-BTIN
If you choose “Instant-Off”, then pushing the ATX soft power switch button once will switch the system to “system off” power mode. You can choose “Delay 4 sec.” If you do, then pushing the button for more than 4 seconds will turn off the system, whereas pushing the button momentarily (for less than 4 seconds) will switch the system to “suspend” mode. The choices:
<Instant-off (default)>, <Delav 4 Sec>.
CPU THRM-Throttling
This field allows you to select the CPU THRM-Throttling rate. The choices:<
25.0%>, <50.0%>, <75.0%>.
Wake-Up by PCI Card
Select [Enabled] when the incident occurred in any PCI cards, PCI cards will be issued by PME signal so that the boot system back to full status.The choices : :
<Enabled> 、 <Disabled(default)> 。
Power On by Ring
When Enabled an input signal on the serial Ring Indicator (RI) line (in other words, anincoming call on the modem) awakens the system from a soft off state. The choices :<
Enabled (default)>, <Disabled>.
Resume by Alarm
When Enabled, your can set the date and time at which the RTC (real time clock) alarm awakens the system from Suspend mode. The choices :< Enabled>, <Disabled (default)>.
58
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Primary and Secondary IDE 0/1
When Enabled, the system will resume from suspend mode if Primary IDE 0 /1 or
Secondary IDE 0/1 is active. The choices :< Enabled>, <Disabled>.
FDD, COM, LPT Port
When Enabled, the system will resume from suspend mode if FDD, COM port, or LPT port is active. The choices :< Enabled>, <Disabled>.
PCI PIRQ[A-D]#
When Enabled, the system will resume from suspend mode if interrupt occurs. The choices :< Enabled>, <Disabled>.
3.6 PnP/PCI Configurations
Init Display First
This option has two options: [PCI slot]/[AGP] , and you can use the options to select the sequence of display card when boot up. If you use AGP display card, you can set to [AGP] ; If you are using he PCI display card, you can set it to [PCI slot] 。
It is recommended using the [AGP] display card, and the graphic performance will be increase dramatically.
59
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Reset Configuration Data
Default is <Disable>. Select Enable to reset Extended System Configuration Data (ESCD) if you have installed a new add-on and system configuration has caused such a conflict that OS cannot boot.
Resources Controlled By
The commands here are <Auto>or <Manual>.Choosing <manual> requires you to choose resources from each following sub-menu. <Auto> automatically configures all of the boot and
Plug and Play devices but you must be using Windows 95 or above.
PCI/VGA Palette Snoop
When set to <Enabled>, various VGA devices which are working on different bus can handle data from CPU on different color palette of different video device. Stored in the 5th bit in the PCI device command cache is the VGA color palette(0 is disabled). For example: if there are two VGA devices(one is PCI and the other is ISA), the setting should be like: if any ISA adaptor installed in the system require VGA color palette, this item should be set to <Enabled>.
INT Pin1-8 Assignment
The option to connect to the computer's motherboard, a PCI interface device designated
IRQ allocation, The choice: <AUTO> , <3> , <4> , <5> , <7> , <9> , <10> , <11>.
Maximum Payload Size
This allows you to set the PCI Express devices largest TLP (Transport Layer Packet) payload value 。 The choice : <128> , <256> , <512> , <1024> , <2048> , <4096>.
3.7 PC Health Status
Annotate :( Green shows the following numerical values for the read-only )
60
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
CPU Warning Temperature
The system will give an automatic warning if the CPU temperature goes over the selected setting.default setting :< disabled>.
Current SYS Temperature , VCore , V1.8
, 5V , 12V , Fan Speed
This shows the current monitoring of all hardware devices / components such as CPU voltage state, temperature and speed of all fans.
Warning_Beep
This allows you to decide, if your system chassis temperature is too high or when the invasion occurred whether or not to issue a beep sound 。 Option : [Enabled] , [Disabled].
61
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.8 Frequency/Voltage Control
CPU Clock Ratio
If the CPU clock ratio is not set, you probably need to set the ratio of the CPU clock before the system can display properly. If you are using the CPU which clock is locked, you needn’t to set CPU clock ratie and the system can be work.
3.9 Load Fail-Safe Defaults
If the system is not stable after installation, this function can be helpful. In this case, the
62
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor system will cancel some of the function which enhance the system, and the system will run in very strict status. So, it is easy to find the safe value and remove errors from the motherboard.
When this option is selected, the host windows will prompt:
Load BIOS Defaults ( Y/N ) ?
Keyin “Y”, and press Enter to execute this funciton. important : This function will not influence the [Standard CMOS Setup].
Keyin Supervisor Pass word can input and revise CMOS BIOS’s value, and Supervisor
Password is set to protect the CMOS against willful revising. If IDE HDD is used by user, function can get the parameters of the HDD and record them to standard CMOS settings. Max four IDE parameters can be get from HDD.
3.10 Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings for optimal performance system operations. While Award has designed the custom BIOS to maximize performance, the factory has the right to change these defaults to meet their needs.Press <Y> to load the default values setting for optimal performance system operations.
63
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
3.11 Set Supervisor Password
Supervisor password level is high than users , you can load CMOS, amend setup by supervisor , also can be used to boot PC. If you select this option and press enter ,the information ”ENTER PASSWORD” will be shows on screen , here you can input your password , , , replace the former one. Press enter again to confirm.
3.12 Set User Password
<User Password Setting> function for a setting password. If you want to set the password,
64
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor first enter the current password to identify your password by y, the screen automatically return to the main screen. Enter the User Password can use the system, but can not modify the contents of CMOS
3.13 Save&Exit Setup
If you select this and press <Enter>, the values entered in the setup utilities will be recorded in the CMOS memory of the chipset. The microprocessor will check this every time you turn your system on and compare this to what it finds as it checks the system. This record is required for the system to operate.
3.14 Exit Without Saving
65
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Selecting this option and pressing <Enter> lets you exit the setup program without recording any new values or changing old ones.
66
Appendix
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Appendix
Appendix 1: Driver Installation
Please install the driver as per the following steps:
Plug programmed disk into CD-ROM, so installation of the driver can be made either automatically or manually. Now manually installation instructions are given as below:
1) A variety of options available regarding manually installation, which you can check from
Device Manager.
2) Right click “my computer ", select "management", and go to “Device Manager"
3) Right click "display controller” in the menu of graphic card, select “Properties ", click “Driver", select “update driver".
4) Select “Show the list of all drivers which are designated locations so that choices can be made from it ", select "next."
5) Select the location of display driver, click “ok"
6) Implement the installation, restart the system.
Proceed with the installation of other drivers after restarting the system, till all installations are implemented. Then user can see that it says device is working
67
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Appendix 2:Watchdog programmer guide watchdog reference code ( ASM ) :
--------------------------------------------------------------------------------------------------------------
Set the port to realize watchdog function through DEBUG order, so that it can carry out
Watchdog Timer’s various functions. port instruction :
2EH : Address register
2FH : Data register
Example : Set Watchdog Timer for30 Seconds, DEBUG in DOS :
C:\>debug
-o 2e 87
-o 2e 87
-o 2e 2b
-o 2f e0
-o 2e 07
; Decode
; bit4=0, set pin as watchdog func
-o 2f 08
-o 2e 30
-o 2f 01
-o 2e f5
-o 2f 00
-o 2e f6
;
;
; Choose register
Activation logic devices
Set timer units as second / (set as min: o 2f 08)
-o 2f 1E ; Set Timer Count to 30 sec. (Max support FF = 255, when it set as 00
Watchdog function stop
; locked register -o 2fe aa
-q
C:\>
68
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
=========================================================== watchdog reference code (c++ language) :
---------------------------------------------------------------------------------------------------- outputb (0x2e, 0x87) outputb (0x2e, 0x87) // Open SUPER IO register outputb (0x2e, 0x2B) outputb (0x2f, 0xE0) //bit4=0 ,set pin as watchdog func outputb (0x2E, 0x07) outputb (0x2F, 0x08) //select logical device outputb (0x2e, 0x30) outputb (0x2f, 0x01) //active the device outputb (0x2e, 0xF5) outputb (0x2f, 0x00) // Set timer units as second / ( Set timer units as minute: outputb (0x2f,
0x08) ) outputb (0x2e, 0xF6) outputb (0x2f, 0xIE) // Set Timer Count to 30 sec outputb (0x2E, 0xAA) // locked register
//------- code end ---------------------------------
69
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Appendix3:GPIO Instruction
MITX-6854 provides a twelve way input and a twelve way output programable interface.
Input and output of the interfaces are independent. In the GPIO interface, there are 26 Pin which are link to 24 digital bits. This interface is generated by the onboard chip on PCI bus, and the bus number is 0, device number is 18 and function number is 0. This interface is using the
3rd basic address register.
According to PCI standard, the basic address are allocated by the
BIOS dynamically, and it is a MUST normally to obtain the basic address before program this interface(if there are no other PCI expansion device, the basic address is: CC00H).
GPIO's interface debugging program is attached in the CD of the packinglist. Running the
GPIO executable file will start the GPIO debug program.
70
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
Appendix 4: Glossary
ACPI
Advanced Configuration and Power Management Interface for short.ACPI specifications allow OS to control most power of computer and its extended devices. Windows 98/98SE,
Windows 2000 and Windows ME are all support ACPI, it provide users a flexible system power management.
ATX:
AT extended, a motherboard layout according with modern standard replaced BabyAT. It changes disposal of many components, and do some new high efficiency design, so it is widely used now.
BIOS
Basic in/out system.It’s a kind of software including all in/out control code interface in PC.
It will do hardware testing while system booting, then system runs, it provides an interface between OS and hardware. BIOS is stored in a ROM chip.
BUS
In a computer system, it’s the channels among different parts for exchanging data; it’s also a group of hardware line. BUS here means part lines inside CPU and main components of memory.
Chipset
Integrated chips for executing one or more function.Here “Chipset” means system level chipset structured by Southbridge & Northbridge; it decides motherboard’s structure and main functions.
CMOS
Complementary Metal-Oxide Semiconductor, a widely used semiconductor with the characteristic of high speed but low power. CMOS we mention here means part of obligate space in on-board CMOS RAM, for saving date, time, system information and system parameter etc.
71
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor
COM
Computer-Output Microfilmer.A universal serial communication interface, usually adopts normative OB 9 connector.
DIMM: Dual Inline Memory Module. It’s a small circuit board with memory chipset, providing
64bit bus width.
DRAM
Dynamic Random Access Memorizer.It’s a normal type of memory often with a transistor and a capacitance to store 1 bit. With the development of the technology, more and more types and specification of ORAM exist in computer application. Now: SDRAM, DDR SDRAM and
RDRAM are generally used.
IDE:
Driver specification for integrated device electronics,for connecting HDD / CD-ROM device.
IRDA:
Infrared Data Association for short, here means infrared transmit interface, to connect infrared transmit devices. This sort of device transmits data by infrared light-wave without connecting any cables .It have been developed a standard now.
LAN
Network interface.Network grouped by correlative computers in a small area, generally in a company or a building. Local area network is buildup by sever, workstation, some communications links, as a rule. Terminals can access data and devices anywhere through cables, so, many users can share costly device and resource.
LED
Light-Emitting Diode.a semiconductor device that shines when power supply is connected, often use to denote info lightly, for example, to denote power on or HDD work normally.
LPT
Line print terminal.The denomination reserved by DOS, is used to denote universal parallel
72
MITX-6854
Mini-ITX Fanless Motherboard Based on ATOM Processor interface, and connect printer in a general way.
POST
Self-test when power on. While booting, BIOS will do once uninterrupted testing operation to the system, including RAM, keyboard, hard disk driver etc. Check them in normal situation and work well.
PS/2
A keyboard & mouse connective interface specification developed by IBM.PS/2 is a DIN interface with only 6PIN; it also can connect other devices, like modem.
USB
It’s Universal Serial Bus for short. A hardware interface adapts to low speed external devices, and is always used to connect keyboard, mouse etc. One PC can connect 127 USB devices Max, providing 12Mbit/s transmit bandwidth ; USB supports hot swap and multi- data stream, namely, you can plug USB devices while system is running, system can auto-detect and makes it work on.
73
advertisement
Related manuals
advertisement